I don't think I've ever written on a forum. Lazy hah. I have an HTC M8 unlocked AT&T Android version 4.4.4, software version 3.42.502.1. Ive had the phone for a year, I never rooted it. But I finally rooted it the other day. I've rooted before but I didn't want to mess up this phone. So I kept it stock for the longest time. I successfully rooted it, kept s on till I get sunshine or what ever. I'm trying to figure out if my phone is the Google play edition. I'm also trying to figure out how to get it back to stock rom with root. I made a back up after I rooted but I'm not sure of thelay back up anymore. I've been looking around, I guess I need a RUU?
ThayerBouche said:
I'm trying to figure out if my phone is the Google play edition.
Click to expand...
Click to collapse
If it came from the factory with main version 3.42.502.1, than its not a Google Play Edition (GPE). The "502" is specific to AT&T version. Although, I say "from the factory" as the version number (software/firmware) can be a result user modifications, which do not accurately reflect the "original" version.
Also, if it has the AT&T logo on the back cover, its also not GPE.
GPE and AT&T are 2 different versions.
You may be thinking of the Developer's Edition, which is often confused with GPE. Dev Edition has the same Model ID (MID) as the AT&T version, but different carrier ID (CID). It also wouldn't have "502" software from the factory, for Dev Edition it would be "1540" in the version number. It also would not have the AT&T logo on the back cover.
ThayerBouche said:
I'm trying to figure out if my phone is the Google play edition. I'm also trying to figure out how to get it back to stock rom with root. I made a back up after I rooted but I'm not sure of thelay back up anymore. I've been looking around, I guess I need a RUU?
Click to expand...
Click to collapse
If you made a TWRP backup after root, then restoring it will not unroot it. The backup would have to have been made before root.
Yes, RUU is one way to return to stock (need to relock bootloader to RUU).
redpoint73 said:
If it came from the factory with main version 3.42.502.1, than its not a Google Play Edition (GPE). The "502" is specific to AT&T version. Although, I say "from the factory" as the version number (software/firmware) can be a result user modifications, which do not accurately reflect the "original" version.
Also, if it has the AT&T logo on the back cover, its also not GPE.
GPE and AT&T are 2 different versions.
You may be thinking of the Developer's Edition, which is often confused with GPE. Dev Edition has the same Model ID (MID) as the AT&T version, but different carrier ID (CID). It also wouldn't have "502" software from the factory, for Dev Edition it would be "1540" in the version number. It also would not have the AT&T logo on the back cover.
If you made a TWRP backup after root, then restoring it will not unroot it. The backup would have to have been made before root.
Yes, RUU is one way to return to stock (need to relock bootloader to RUU).
Click to expand...
Click to collapse
Okay, thank you! Now I can do the resore and that works just fine. I'm using ClockWork BTW, not TWRP. I used TWRP back when I had my EVO3D but I heard ClockWork has more options and is more advanced now. Not that it really matters. Anyways, I'm just wanting to get back to stock with a compleate wipe of the phone and clean copy with root. I'm getting sunshine soon. Now were would be the best place for me to start to get RUU?
ThayerBouche said:
I'm using ClockWork BTW, not TWRP. I used TWRP back when I had my EVO3D but I heard ClockWork has more options and is more advanced now. Not that it really matters. Now were would be the best place for me to start to get RUU?
Click to expand...
Click to collapse
CWM never officially supported this device, and hasn't been updated for the M8 for a really long time (like a year or 2). It may have worked with your old firmware. But continue using it moving forward (after you update) and you may run into issues.
ThayerBouche said:
Now were would be the best place for me to start to get RUU?
Click to expand...
Click to collapse
You'll find the RUUs and notes for using them, on my Index thread: http://forum.xda-developers.com/showthread.php?t=2751432
Related
I have been trying to find a way to unroot my AT&T HTC One and revert back to stock, but I keep reading that I need a RUU and the AT&T one is now out. I have had success in unlocking and locking the boot loader, but in doing so, a nandroid backup was wiped. I currently have the bootloaded unlocked and twrp recovery with SuperSU installed, but I would like to remove SuperSU.
Is there any way to remove it for good or reflash my device to bring it back to stock?
Thanks
aophyz said:
I have been trying to find a way to unroot my AT&T HTC One and revert back to stock, but I keep reading that I need a RUU and the AT&T one is now out. I have had success in unlocking and locking the boot loader, but in doing so, a nandroid backup was wiped. I currently have the bootloaded unlocked and twrp recovery with SuperSU installed, but I would like to remove SuperSU.
Is there any way to remove it for good or reflash my device to bring it back to stock?
Thanks
Click to expand...
Click to collapse
http://www.andromods.com/unroot-locking/how-to-restore-to-stock-unbrick-unrooting-htc-one-m7.html
You have probably already read this, I'm not aware of the RUU being available for the AT&T variant yet. Where did you find it?
You have probably already read this, I'm not aware of the RUU being available for the AT&T variant yet. Where did you find it?
Click to expand...
Click to collapse
Terribly sorry, but I meant to write "not out" instead of "now out"
And yes I have read that and keep checking back every couple of days to see if the AT&T one ever shows up.
So I've been unlocking and rooting/flashing phones since the HTC Universal but i'm stumped. I've downloaded the toolkit to unlock my bootloader, downloaded my .bin file and the toolkit says my bootloader is unlocked but the screen on my phone asking me whether i want to unlock it never comes out...any senior members willing to point me in the right direction? I'm using my AT&T M8 on T-mobile and i haven't had a single update since i bought the M8 so i need to update it ASAP.
Update: So I used the sunshine method to try and finally root my phone. Now I'm in the interesting situation where my boot loader is unlocked, it's s-off, yet there is still the stock recovery and not rooted yet. Quite the last 12 hours trying to get root access. I should be able to root it on the PC now that my boot loader is unlocked.
HTCFAN0923 said:
So I've been unlocking and rooting/flashing phones since the HTC Universal but i'm stumped. I've downloaded the toolkit to unlock my bootloader, downloaded my .bin file and the toolkit says my bootloader is unlocked but the screen on my phone asking me whether i want to unlock it never comes out...
Click to expand...
Click to collapse
The Toolkit hasn't been updated in forever, is very obsolete, and will therefore cause more problems than anything.
Toolkit just does functions that are easy to do yourself "manually" anyway. You don't need the toolkit, and you didn't need to s-off to unlock the bootloader (although it can be handy for other things).
HTCFAN0923 said:
I'm using my AT&T M8 on T-mobile and i haven't had a single update since i bought the M8 so i need to update it ASAP.
Click to expand...
Click to collapse
OTA updates for the AT&T version will only be received when connected to AT&T's network (an AT&T specific annoyance). You could have updated to Lollipop using RUU.
---------- Post added at 11:28 AM ---------- Previous post was at 11:26 AM ----------
HTCFAN0923 said:
Update: So I used the sunshine method to try and finally root my phone. Now I'm in the interesting situation where my boot loader is unlocked, it's s-off, yet there is still the stock recovery and not rooted yet. Quite the last 12 hours trying to get root access. I should be able to root it on the PC now that my boot loader is unlocked.
Click to expand...
Click to collapse
Now that the bootloader is unlocked, just flash TWRP via fastboot. Then flash SuperSU 2.46 using TWRP to obtain root.
But your OP says you want to update. Here it says you want to root. Those are 2 very different things, so its not clear what your actual goal is.
redpoint73 said:
The Toolkit hasn't been updated in forever, is very obsolete, and will therefore cause more problems than anything.
Toolkit just does functions that are easy to do yourself "manually" anyway. You don't need the toolkit, and you didn't need to s-off to unlock the bootloader (although it can be handy for other things).
OTA updates for the AT&T version will only be received when connected to AT&T's network (an AT&T specific annoyance). You could have updated to Lollipop using RUU.
---------- Post added at 11:28 AM ---------- Previous post was at 11:26 AM ----------
Now that the bootloader is unlocked, just flash TWRP via fastboot. Then flash SuperSU 2.46 using TWRP to obtain root.
But your OP says you want to update. Here it says you want to root. Those are 2 very different things, so its not clear what your actual goal is.
Click to expand...
Click to collapse
Thanks for the help and sorry for the confusion.
I'm looking to update my phone AND root just because I've always rooted my phones but just now got a replacement for my old laptop that broke down shortly before I got the M8. I figured since I was on T-Mobile my best bet to update it would be to root it and upload a new ROM anyway. Your suggestion is easy enough so I'll be doing that after work.
My last question is this: On the M7, I was able to use an international M7 ROM as everything apart from the radios was the same. Is that the case with the M8 as well? I typically like having Sense ROM's but hate the bloat carriers put on their RUU's....
thanks again!
HTCFAN0923 said:
I'm looking to update my phone AND root just because I've always rooted my phones but just now got a replacement for my old laptop that broke down shortly before I got the M8. I figured since I was on T-Mobile my best bet to update it would be to root it and upload a new ROM anyway. Your suggestion is easy enough so I'll be doing that after work.
Click to expand...
Click to collapse
In that case, I would suggest updating by RUU first, and then root.
Reason I say that, is that RUU would wipe out root anyway, so no point in having to do it twice.
Whether you unlock the bootloader (via HTCDev.com) before or after RUU is somewhat irrelevant. Especially since you have s-off, so its not required to relock the bootloader to RUU (which is required with s-on).
But one other thing to consider. Since you are using the AT&T version on the T-Mobile US network; the ATT version is actually missing support for the AWS band that T-Mob uses in most areas for HSPA (3G). If you are in an area with good LTE coverage (and I'll assume NYC is) you may have not even noticed this. But if you move into an area where T-Mob doesn't have LTE, you might find that you don't have 3G either, and be pushed down to 2G (EDGE) data speed.
One cool thing about the M8, is the band support is actually software based. So one option would be to change your device's carrier ID (CID) and model ID (MID) which are possible with s-off, then flash the T-Mobile firmware or RUU to "convert" the phone to a T-Mob device including the proper T-Mob band support. After that, you can unlock the bootloader, root, flash a custom ROM.
HTCFAN0923 said:
My last question is this: On the M7, I was able to use an international M7 ROM as everything apart from the radios was the same. Is that the case with the M8 as well? I typically like having Sense ROM's but hate the bloat carriers put on their RUU's....
Click to expand...
Click to collapse
Yes, its a similar situation on the M8. All international ROMs should work on the M8. But note that your firmware (hboot, radio, etc.) needs to be the proper version supported by the ROM. So for instance, if you are still on KitKat (sounds like you are) you will want to update firmware first, otherwise if you flash a Lollipop ROM, you will likely suffer major issues such as broken WiFi and extreme long boot times (10+ min).
redpoint73 said:
In that case, I would suggest updating by RUU first, and then root.
Reason I say that, is that RUU would wipe out root anyway, so no point in having to do it twice.
Whether you unlock the bootloader (via HTCDev.com) before or after RUU is somewhat irrelevant. Especially since you have s-off, so its not required to relock the bootloader to RUU (which is required with s-on).
But one other thing to consider. Since you are using the AT&T version on the T-Mobile US network; the ATT version is actually missing support for the AWS band that T-Mob uses in most areas for HSPA (3G). If you are in an area with good LTE coverage (and I'll assume NYC is) you may have not even noticed this. But if you move into an area where T-Mob doesn't have LTE, you might find that you don't have 3G either, and be pushed down to 2G (EDGE) data speed.
One cool thing about the M8, is the band support is actually software based. So one option would be to change your device's carrier ID (CID) and model ID (MID) which are possible with s-off, then flash the T-Mobile firmware or RUU to "convert" the phone to a T-Mob device including the proper T-Mob band support. After that, you can unlock the bootloader, root, flash a custom ROM.
Yes, its a similar situation on the M8. All international ROMs should work on the M8. But note that your firmware (hboot, radio, etc.) needs to be the proper version supported by the ROM. So for instance, if you are still on KitKat (sounds like you are) you will want to update firmware first, otherwise if you flash a Lollipop ROM, you will likely suffer major issues such as broken WiFi and extreme long boot times (10+ min).
Click to expand...
Click to collapse
Crap....went back to the toolkit to flash twrp and root it and lo and behold, my phone is now stuck in the entering recovery screen....How ****ty is that toolkit that it can't do even do a proper recovery flash right...8 years on XDA and I've never had such a headache from rooting/flashing a device....
HTCFAN0923 said:
Crap....went back to the toolkit to flash twrp and root it and lo and behold, my phone is now stuck in the entering recovery screen....How ****ty is that toolkit that it can't do even do a proper recovery flash right...8 years on XDA and I've never had such a headache from rooting/flashing a device....
Click to expand...
Click to collapse
I gave previous advice to stop using the toolkit, so I don't know why you insist on ignoring that advice.
Older versions of TWRP don't work on newer hboots; and the opposite is true where older hboots don't work with newer TWRP builds. This is the most frequent reason for TWRP not working properly.The toolkit worked fine at the time it was updated. But it hasn't been updated in a very long time, and therefore won't work on many M8 versions now. The issue is more your lack of understanding, and lack of following advice given to you.
Flashing TWRP is just a matter of downloading the proper version, and flashing with a single fastboot command (2 commands, if you want to be thorough and wipe cache before flashing TWRP). You don't need a toolkit for that, and again I advise stopping its use altogether.
Its not clear whether you chose to update before TWRP and root (current device status) and once I know the main version (OS number on bootloader screen) and present hboot number I can probably advice what version TWRP you need to flash.
And you're absolutely right about that. It was my fault for not listening. I was being lazy about it honestly.
I did end up using the lollipop pre rooted RUU and that worked after two atttempts. I think the issue was that the toolkit flashed the recovery without root. Add that to the fact that the toolkit caused the SD card issue to pop up made it a nightmare. Thankfully, I was able to fix it and now I'm running the AT&T lollipop ROM rooted.
You truly are the best and I thank you for the advice and help. Let me know your PayPal so I can send you beer money for the trouble.
HTCFAN0923 said:
I think the issue was that the toolkit flashed the recovery without root.
Click to expand...
Click to collapse
I don't follow. Root isn't needed to install custom recovery; nor does flashing custom recovery automatically root the phone (this has to be done as an additional step, usually by flashing SuperSU in TWRP).
I think the main issue was that the toolkit flashed an old TWRP version that was not compatible with the software/firmware that was on your phone.
HTCFAN0923 said:
You truly are the best and I thank you for the advice and help. Let me know your PayPal so I can send you beer money for the trouble.
Click to expand...
Click to collapse
I appreciate the thought; but your thanks is all I expect in return. I've benefited plenty from XDA from folks that don't ask for any monetary compensation; so I just like to give back to the community by helping how I can.
How to upgrade ATT HTC ONE M7 without losing root
Hello all, I have an AT&T HTC ONE M7 that is currently running Android 4.4.2 with HTC Sense 6.0 (software # 5.03.651.3). I have rooted it with TWRP and SuperSU and need some guidance to update my phone without losing the root (or unroot/upgrade/re-root). Can't seem to find anything. I want to stick with the factory ROM ideally, but would be happy to take a look at any other that is comparable. Not looking for added capability, just want to get my phone up to date.
Thanks in advance!!
Signaldog
I'm not an expert on these things, so hopefully someone will correct me if I'm wrong, but isn't software # x.xx.651.x for Sprint devices? The AT&T factory software is x.xx.502.x. So either you don't have an AT&T version of the M7 or you're not running the factory ROM. It's definitely not the AT&T factory ROM.
But to answer you question, since you're already rooted with a custom recovery, there probably has been enough changes to the system that will prevent the OTA's from installing, even if you reflash stock recovery. And if you are in fact running the Sprint ROM while on the AT&T network, you probably wouldn't get the OTA's anyway. So in order to get the latest updates you'll need to flash a ROM clean. Since you want to stay factory stock, that means the RUU, which you can download directly from HTC. You'd definitely want to confirm which variant of the M7 you have and make sure you get the right RUU. Pretty sure the AT&T RUU won't flash to a Sprint branded device unless you're S-Off w/ Super CID. And there may be some other incompatibilities in this situation. You may want to look into custom roms at this point.
However, once the RUU is complete and the clean ROM is up and running, it's a simple process of flashing TWRP and installing SuperSU to root.
You'll then need to spend time setting up all your apps and customizing everything to your liking, so make sure to set aside a block of time to do that. And be sure to backup any personal files onto your computer before running the RUU. It will wipe the sdcard.
So, yes, as it turns out, my brain was not working correctly and I do indeed have a SPRINT M7, not an AT&T one. I'm not sure why I confused that. Regardless, thanks for the help, sounds like I can do what I need to do without any significant risks, minus the time involved.
Thanks.
"Unfortunately, AT&T Ready2Go has stopped." Is stuck looping on my phone.
About a year ago I rooted my phone, following these directions. (I can't yet post a link, but the first option on google when searching "how to root m8" is the site, htconeroot.com, that I used.)
This morning I noticed that my phone was not vibrating anymore no matter if I restarted the phone or what settings were applied. So I checked online to see if there was a fix, and a factory reset was recommended.
So when I got back from work today, I thought I had successfully uninstalled the root using SuperSU. Then I performed a factory reset. My phone then went into TWRP recovery which was alarming. So I rebooted the system from TWRP , then the message in the title kept popping up over and over again, so I am in a bit of a pickle. I can message and call at the moment but that is about it.
I'm thinking the problem is similar to this one someone had on a note 3, except I was trying to factory reset rather than update. http://forum.xda-developers.com/showthread.php?t=2663120
Has this happened to anyone else, and do you have any suggested fixes for resetting this phone???
Thanks in advance.
I've seen a number of cases on the M8 forums of various processes stopping with message "XXX has stopped" after a factory reset. Not sure what is causing this. But there are a variety of ways to recover.
Since you have TWRP, you can try to restore a TWRP backup of your own (if you made one) or install a stockish ROM. Those methods may be helpful if you want to retain or retrieve any personal data.
Otherwise, relock the bootloader and RUU back to full stock (RUU will wipe the phone).
redpoint73 said:
Otherwise, relock the bootloader and RUU back to full stock (RUU will wipe the phone).
Click to expand...
Click to collapse
Honestly I'd be fine returning to full stock, at least for the time being, to see if the vibration problem would fix itself. But do I need to be S-OFF for RUU?
eaflook said:
But do I need to be S-OFF for RUU?
Click to expand...
Click to collapse
No, and I wish folks would stop saying you need s-off to RUU (not you, but I assume you got this notion from another post/thread).
You can run the an RUU made for the AT&T M8, as long as you aren't "downgrading" to a previous version (such as Lollipop to Kitkat). For that, you need s-off; or to change the CID and run another carrier version RUU.
You do need to relock the bootloader to run RUU while s-on, with command: fastboot oem lock
Are you currently on LP or MM (what does it say for OS number on the bootloader screen)?
redpoint73 said:
No, and I wish folks would stop saying you need s-off to RUU (not you, but I assume you got this notion from another post/thread).
You can run the an RUU made for the AT&T M8, as long as you aren't "downgrading" to a previous version (such as Lollipop to Kitkat). For that, you need s-off; or to change the CID and run another carrier version RUU.
You do need to relock the bootloader to run RUU while s-on, with command: fastboot oem lock
Are you currently on LP or MM (what does it say for OS number on the bootloader screen)?
Click to expand...
Click to collapse
Um... the OS line on the bootloader screen looks blank, unless I'm looking in the wrong place.
Should I do this? http://forum.xda-developers.com/htc-one-m8/help/guide-how-to-solve-soft-brick-phone-t2824193
eaflook said:
Um... the OS line on the bootloader screen looks blank, unless I'm looking in the wrong place.
Click to expand...
Click to collapse
No, you're looking in the right place. Its somewhat common for OS number to be blank, its a known bug in older TWRP versions that it deletes the OS number.
What does it say for hboot number and radio number?
If the phone still on the stock ROM you originally rooted on? If so, is it Lollipop, Kitkat, etc.?
eaflook said:
U
Should I do this? http://forum.xda-developers.com/htc-one-m8/help/guide-how-to-solve-soft-brick-phone-t2824193
Click to expand...
Click to collapse
You can do that. All that "guide" describes is one way to get a ROM on an SD and flash it, which is one of the options I already suggested in Post #2 above.
But what ROM will work, somewhat depends on the info I requested above.
redpoint73 said:
What does it say for hboot number and radio number?
Click to expand...
Click to collapse
hboot number-3.19.0.0000
radio [email protected]
redpoint73 said:
If the phone still on the stock ROM you originally rooted on? If so, is it Lollipop, Kitkat, etc.?
Click to expand...
Click to collapse
Yes it is still on the stock root ROM. I am running Lollipop 5.0.2.
eaflook said:
hboot number-3.19.0.0000
radio [email protected]
Yes it is still on the stock root ROM. I am running Lollipop 5.0.2.
Click to expand...
Click to collapse
You should be fine flashing most any ROM on the AT&T or "international" M8 development forums. Just avoid other dev sections for variants, such as the Sprint or Verizon dev sections.
Before flashing a ROM, you may want to update your TWRP version to 3.0.whatever.
Although I have to admit, I'm still on TWRP 2.8.4, and its worked fine flashing LP and MM custom ROMs. Any older than 2.8.something may cause issues.
Alternately, relock bootloader and run RUU 4.28.502.2 (Lollipop). If you want to run the Marshmallow RUU (6.20.502.5), you'll need to flash the MM firmware first, then RUU. Link that describes that process, as well as all ATT RUUs is on my Index thread: http://forum.xda-developers.com/showthread.php?t=2751432
redpoint73 said:
You should be fine flashing most any ROM on the AT&T or "international" M8 development forums. Just avoid other dev sections for variants, such as the Sprint or Verizon dev sections.
Before flashing a ROM, you may want to update your TWRP version to 3.0.whatever.
Although I have to admit, I'm still on TWRP 2.8.4, and its worked fine flashing LP and MM custom ROMs. Any older than 2.8.something may cause issues.
Alternately, relock bootloader and run RUU 4.28.502.2 (Lollipop). If you want to run the Marshmallow RUU (6.20.502.5), you'll need to flash the MM firmware first, then RUU. Link that describes that process, as well as all ATT RUUs is on my Index thread: http://forum.xda-developers.com/showthread.php?t=2751432
Click to expand...
Click to collapse
Do you know how I might update TWRP from 2.7.0.2?-----Nevermind, I got it.
eaflook said:
Do you know how I might update TWRP from 2.7.0.2?-----Nevermind, I got it.
Click to expand...
Click to collapse
Good practice is to post what you did (or going to do) for the benefit of others that may have the same question; or so we can verify you are on the right track.
In case others may have the same question (or you get stuck again), all TWRP versions, and instructions (recommend install with fastboot method) are here: https://twrp.me/devices/htconem8gsm.html
There is a master list of stock recovery versions for the HTC One. How do I determine which version I should be using?
None of those. That is hardly a "master" list. It's over 3 years old, never updated past the original Kitkat (M8 release) recoveries, and woefully obsolete. You'll want your recovery number to match your OS number (main version on bootloader screen or getvar all). Also, none of those are valid for AT&T version M8 (which is what I assume you have, since this section is specifically for the AT&T M8). It would need to have "502" in the version number x.xx.502.x which specifically denotes AT&T.
Why exactly do you want stock recovery? Most folks want this, in order to get OTA updates. But you will also need a stock, never rooted ROM (unrooting doesn't work), and also must be connected to the AT&T network. It's probably easier to relock the bootloader, and update by RUU. Note that RUU will wipe all data from the phone. See RUU section in my Index thread: https://forum.xda-developers.com/showthread.php?t=2751432
If you really want stock recovery, you should be able to extract it from the firmware.zip. Find the right firmware version number from the firmware collection, and extract recovery.img from the "Stock, Full Wipe" firmware zip:
https://forum.xda-developers.com/htc-one-m8/development/progress-fuu-m8-t2813792
That is definitely helpful. Thank you. I didn't realize that I could pull the bootloader out of the firmware.zip. The phone was AT&T and later unlocked and made in to a rooted Cyanogenmod phone. I had to un-root and install Android GPE. It's not really AT&T anymore. Now I can download OTA updates, but cannot install them because TWRP is still the bootloader. I would rather do the OTA updates since the phone is already stock-ish and resetting everything is only slightly preferable to stabbing my eye out.
Since I'm unlocked on marshmallow, it looks like I want the 6.12.1540.4 zip.
mortifyxda said:
I didn't realize that I could pull the bootloader out of the firmware.zip.
Click to expand...
Click to collapse
Recovery and bootloader are two completely different things! You can pull recovery.img from firmware.zip, and flash with fastboot. I would not do this with bootloader, which would require s-off (to flash manually) and it would still be risky. Better to flash the whole firmware.zip or RUU, if you want to update bootloader. But I don't think that is what you meant.
mortifyxda said:
I had to un-root and install Android GPE. It's not really AT&T anymore. Now I can download OTA updates, but cannot install them because TWRP is still the bootloader. I would rather do the OTA updates since the phone is already stock-ish and resetting everything is only slightly preferable to stabbing my eye out.
Since I'm unlocked on marshmallow, it looks like I want the 6.12.1540.4 zip.
Click to expand...
Click to collapse
Your description is confusing, and I think you're mixing the terms up again. 6.12.1540.4 is the version number for the US Developer's Edition, which is Sense, and not the same as Google Play Edition (GPE) which is not Sense.
To OTA, the version number of the current stock ROM needs to match your firmware number (in bootloader and getar all), and you also need matching stock recovery.
To be clear, what is the current ROM (and version number) as shown in Settings? And also do fastboot getvar all, and post the result (delete IMEI and serial number). Need those pieces of info, before I can properly advise what stock recovery to use.