I have SD version of the phone with unlocked bootloader, rooted, and twrp installed. I am unable to flash any of the CM based roms as none of these roms are able to detect my sim cards. The only rom which works fine is the Global Developer rom. Even when I try to install Stable stock, it gets stuck at verifing Mi account page. I tried wiping literally everything but even then, no success. Please help. Thanks.
Why are you unable to flash CM based ROMs? What does TWRP shows when you try to flash?
TheProblemGuy said:
Why are you unable to flash CM based ROMs? What does TWRP shows when you try to flash?
Click to expand...
Click to collapse
The problem has been solved. There wasnt a problem in flashing but the cm based roms didnt used to detect my sim cards. I just flashed radios.zip file and now everything works well. Thanks.
Related
Hey,
I got a problem with my S2g. I'm currently on Android 4.1.2, with cwm 6 and blazing v-5 kernel. Both were flashed per odin and work fine. However I can't flash a custom rom. Every time I try it I'll get a Status 7 error. I've already tried 4 different ROMs and I'm really annoyed by now. I also tried to factory reset the phone before I flash the ROM, but it didn't make any difference. I also tried deleting the assert command in the updater-script file but somehow my changes in the file won't be saved.
If anyone could help me I would be really thankful!
http://forum.xda-developers.com/galaxy-s2/help/to-mod-s2-t3189884
I've just tried this, didn't work also. I even had to flash the recovery and the kernel again after trying to flash the file in the link, because the phone wouldn't boot normal or in recovery mode.
mcb25 said:
Hey,
I got a problem with my S2g. I'm currently on Android 4.1.2, with cwm 6 and blazing v-5 kernel. Both were flashed per odin and work fine. However I can't flash a custom rom. Every time I try it I'll get a Status 7 error. I've already tried 4 different ROMs and I'm really annoyed by now. I also tried to factory reset the phone before I flash the ROM, but it didn't make any difference. I also tried deleting the assert command in the updater-script file but somehow my changes in the file won't be saved.
If anyone could help me I would be really thankful!
Click to expand...
Click to collapse
Try using philz recovery on your phone. It should flash most ROMs fine.
gsstudios
gsstudios said:
Try using philz recovery on your phone. It should flash most ROMs fine.
Click to expand...
Click to collapse
I just did, I still get the Status 7 error. I tried to flash the cm 12.1 and the cm 13.0 nightly rom. I also tried deleting the assert command in the updater-script file but it still won't work. There was no Status 7 error but it still said "Installation aborted".
Does anyone else got an idea how to fix this?
http://forum.xda-developers.com/galaxy-s2/development/kernel-blazing-kernel-v16-t2275275
I used this Kernel, I just noticed, that it's only compatible with Android 4.1, 4.2 or 4.3.
I then tried to install the DorimanX Kernel for LP and MM (http://forum.xda-developers.com/galaxy-s2/development-derivatives/kernel-dorimanx-lp-5-x-x-t3145879) but my phone stucks at the boot screen.
mcb25 said:
http://forum.xda-developers.com/galaxy-s2/development/kernel-blazing-kernel-v16-t2275275
I used this Kernel, I just noticed, that it's only compatible with Android 4.1, 4.2 or 4.3.
I then tried to install the DorimanX Kernel for LP and MM (http://forum.xda-developers.com/galaxy-s2/development-derivatives/kernel-dorimanx-lp-5-x-x-t3145879) but my phone stucks at the boot screen.
Click to expand...
Click to collapse
Apologies, I only just noticed you have a i9100g, not a i9100. You can't just flash i9100 kernels as they simply won't work!
You can follow the guide in the CM13 OP here:
http://forum.xda-developers.com/galaxy-s2/development/rom-cyanogenmod-13-0-t3381511
gsstudios
1) cm-14.0-20160914-UNOFFICIAL-onyx.zip, 2) cm-14.0-20160917-UNOFFICIAL-onyx.zip
These are the 2 cm14 zips that I tried to flash multiple times (using twrp 3.0.2.0). The flash was successful everytime. But no matter how hard I try, it just won't boot. Just stays stuck on the OnePlus logo for eternity. I just recovered my phone from a soft-brick (no OS, no Recovery) and still continuously trying since days to use cm14.
Please, if anyone can then PLEASE HELP!
amritanshu.sikdar said:
1) cm-14.0-20160914-UNOFFICIAL-onyx.zip, 2) cm-14.0-20160917-UNOFFICIAL-onyx.zip
These are the 2 cm14 zips that I tried to flash multiple times (using twrp 3.0.2.0). The flash was successful everytime. But no matter how hard I try, it just won't boot. Just stays stuck on the OnePlus logo for eternity. I just recovered my phone from a soft-brick (no OS, no Recovery) and still continuously trying since days to use cm14.
Please, if anyone can then PLEASE HELP!
Click to expand...
Click to collapse
Check the bootloader compatibilty of these roms, if they r for the mm bootloader it ll not boot untill u upgrade ur bootloader, check the threads from wer u hv downloaded this...
amritanshu.sikdar said:
1) cm-14.0-20160914-UNOFFICIAL-onyx.zip, 2) cm-14.0-20160917-UNOFFICIAL-onyx.zip
These are the 2 cm14 zips that I tried to flash multiple times (using twrp 3.0.2.0). The flash was successful everytime. But no matter how hard I try, it just won't boot. Just stays stuck on the OnePlus logo for eternity. I just recovered my phone from a soft-brick (no OS, no Recovery) and still continuously trying since days to use cm14.
Please, if anyone can then PLEASE HELP!
Click to expand...
Click to collapse
Most Roms now require you too flash OOS 3.1.3 first. Like mentioned above bootloader issue.
Exodusche said:
Most Roms now require you too flash OOS 3.1.3 first. Like mentioned above bootloader issue.
Click to expand...
Click to collapse
I already flash the OOS 3, but still this problem continues.
File name: OnePlusXOxygen_14_OTA_015_all_201608181615_e03d2112e8ad4bff
Is there any other way how I can manually upgrade my bootloader? That would really help.
amritanshu.sikdar said:
I already flash the OOS 3, but still this problem continues.
File name: OnePlusXOxygen_14_OTA_015_all_201608181615_e03d2112e8ad4bff
Is there any other way how I can manually upgrade my bootloader? That would really help.
Click to expand...
Click to collapse
check out this thread http://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
amritanshu.sikdar said:
I already flash the OOS 3, but still this problem continues.
File name: OnePlusXOxygen_14_OTA_015_all_201608181615_e03d2112e8ad4bff
Is there any other way how I can manually upgrade my bootloader? That would really help.
Click to expand...
Click to collapse
I use Oxygen_14_OTA_18_all but there's a couple files posted on the bootloader upgrade threads that allow you not too flash the whole firmware just the partions you need to upgrade.
i am having same issue i was on oxygenos 3.1.3 firmware when i started to flash nogut roms every nogut rom works except cm. i flashed official cynogenmod 14.1 thinking that problem must have been solved but it wont boot it just shows oneplus logo. i have waited for 30 minutes but nothing happened if something worked out for you please tell me.
Well I've looked around XDA for soultion and this is it.
CM 14 has some Kernel problems, so only what you have to do is just install new kernel as Arsenic or Black Reactor kernel
I was running the new bootloader on cm13 nightlies and couldn't get it to boot either.
Even after a full wipe and reflash with v7 gapps
Gave up in the end and went back to the last cm13 Nightly
flash arsenic kernel after flashing rom and gapps it will boot. Read the posts in ashwin's official cm 14.1 thread.
Flash Black Reactor (recommended) or Arsenic Kernel.
The zip files that you have for CM are the unofficial ones. So I guess they're from Sarthak Narang. Or at least one of them. Those ROMs require the older bootloader to function. So if you have the newer bootloader, it won't work.
Hi, I am trying to install cynogenmod or mokee rom and the device always gets stuck at cyno/mokee logo. it never goes beyond that. tried to wait for half an hour(waited for one hour twice).
Here is what I am doing:
I used TWRP but it wasnt working so i installed CWM, in both the recoveries I was wiping everything except sd card storage as my zip files were in the card. after that i flashed zip files(ROM & GAPPS). after that i rebooted to system. Am I doing it wrong? I am currently on 4.4.4 stock rom. Need help.
Thank you.
No one to help?
How can TWRP not work on your device? Install again TWRP via adb.
Flash latest twrp 3.0.2 and try
rian_tama said:
How can TWRP not work on your device? Install again TWRP via adb.
Click to expand...
Click to collapse
Rajendran Rasa said:
Flash latest twrp 3.0.2 and try
Click to expand...
Click to collapse
The problem wasn't with the recovery and I wasn't doing anything wrong. It was really too bad to know that the rom version I was installing had a bootloop bug in it. So I had tried two previous versions but they too had the same bug. And unfortunately I tried CONTINUOUSLY for two long days to install those same bugged ROMS as if God has put me in frustration mode. Tech fooled me right, lol.
Grab the November 8 version of Cyanogemod. There are issues with the newer updates.
I accidentally wiped system and other partitions from my nx529j.
i was trying to flash stock rom but in stock recovery it says SD card not detected.
Even in TWRP i was unable to flash stock rom (Both 5.1.1 and 6.0.1). Custom ROM is installed but during calls neither me nor the other person can hear each others voice.
Internet is working fine.
Help.
I have the same problem. When I flashed RR or Mokee rom I was unable to hear call sound. I searched many forums but nothing helped. So i decided to flash stock rom bac, but it stuck on "Be yourself" or something like that. Now I am usim RR rom but without phone function which is very weird. Have anyone the same issue?
The same problem
Pauliesss said:
I have the same problem. When I flashed RR or Mokee rom I was unable to hear call sound. I searched many forums but nothing helped. So i decided to flash stock rom bac, but it stuck on "Be yourself" or something like that. Now I am usim RR rom but without phone function which is very weird. Have anyone the same issue?
Click to expand...
Click to collapse
I have similar problem. I have some Lineage 7.1 ROM and I want to flash back Stock ROM 6.0 beta, but I just try flash rom from official support page (.zip) and via TWRP and it show me ERROR I think, that maybe it isnt flashable file, but I dont know, how to change it to.
Please HELP US!!
Hi guys, so I were using Pie Roms and I want to go back to MIUI based custom ROMs, which is Masik X. But it said I have to format my phone, then I format it then install it again. This time it didn't detect my sim card. I have encounter this before and flashing a near stock ROM like Xiaomi.eu worked last time. But it doesnt work this time, instead the flashing just take a super long time it won't end. So basically I can't flash or boot MIUI based custom ROMs. And when i managed to flash it, it always told me to activate my device, which is hard if it didn't detect my sim card because the wifi at my dorm needs to login at the login page first. Thanks for the help!
format and flash the latest firmware zip and try again.
also if you have twrp back up of miui rom try restoring it