Hello guys. At the first, sorry for my bad englisch.
I have a big problem since yesterday.
I wanted to install Cyanogenmod 13 my S6 Edge (SM-G925F).
1. I installes TWRP with Odin 3. Everything was finde.
2. I flashed Cm13 with TWRP and restarted my phone. Here i got a softbrick. On the left up*er corner i get the message "kernel is not seandroid enforcing" and the phone stuck in bootmode.
i tried to flash again cm13 + Gapps arm64 after i wiped the phone, but still the same problem.
i can go in the Downloadmode and i can open TWRP Recoverymode. Can anyone help me?
And sorry again for mit english..
Download and install Samsung Kies. Select "tools" and "emergency firmware recovery." You will be able to get the latest stock ROM.
Alternatively, download and install Odin, start the phone pressing "power - home - volume down" simultaneously and flash any compatible ROM.
Related
(Please excuse my poor English)
I have a Galaxy S3 i9300. OS is Android 4.3, rooted, and old version CWM recovery installed.
I can't remember exact OS and CWM recovery versions, because I had installed them years ago.
Today, I had decided to upgrade my old CWM recovery. I installed ROM Manager apps from
Google Play Store. (I installed and used the Rom Manager app for the first time)
I ran the Rom Manager app and upgraded CWM recovery as the app instructed. No errors were
reported. Then I chose "Reboot into Recovery".
Then the big trouble happend.
1. Normal "Samsung GALAXY S III GT-I9300" boot message appeared
2. Small Hat image and "ClockworkMode Recovery v6.0.4.6" message appeared
3. Screen blacked out.
4. Repeat 1~3 infinitely.
When I tried to connect via USB, my Windows7 PC could not recognize the i9300 at all.
I cannot use the i9300 as phone, too. I cannot do anything at all.
How can I fix this big trouble?
I have the same problem with TWRP recovery, keeps rebooting over and over again, sometimes the recovery menu appearing and reboots after some seconds automatically, please help
I had the same problem with my i9300 with CWM recovery it kept booting back to recovery no mather what i did i can recoment 2 things
1.flash new recovery with odin(did not try this but xould help
2. Flash original samsung firmware also with odin (this helped me)
My advice i olny flash recovery with odin roms with recovery
Thank you. I could fix the problem by flashing another kind of recovery app.
1. Enter the odin mode (press volume_down + home + power when power up , http://forum.xda-developers.com/wiki/Odin_mode )
2. Connect i9300 to PC via USB
3. Flash another kind of recovery app using Odin (in my case. CWMs are not work, but TWRPs are good)
So basically, im a noob. i tried flashing stock lollipop on my galaxy s4 from CyanogenMod with odin, but it says not responding everytime pda is clicked. Now, when i try to boot up the phone with recovery mode (vol up home button and lock) it says "Recovery Booting" in the corner and vibrates twice. Then it tries to boot normally but of course fails with the cyanogenmod splash screen eternally spinning. PLZ HELP i have no other phone
Try a different PC and/or version of Odin. Sometimes Odin does that for a couple minutes and then will finish checking the md5 and work fine afterwards. Can be finicky on some computers.
pavee2000 said:
So basically, im a noob. i tried flashing stock lollipop on my galaxy s4 from CyanogenMod with odin, but it says not responding everytime pda is clicked. Now, when i try to boot up the phone with recovery mode (vol up home button and lock) it says "Recovery Booting" in the corner and vibrates twice. Then it tries to boot normally but of course fails with the cyanogenmod splash screen eternally spinning. PLZ HELP i have no other phone
Click to expand...
Click to collapse
your device is on a bootloop. you can overcome it by flashing last working official firmware of your device.
& for the lollipop update,
Check whether the update of lollipop is in .tar,md5 format then only you can flash it via odin through PDA option. You can even try Odin_v3.09 & select the AP option or simply follow any guide how to use Odin_v3.09
If the update is in .zip format then install a custom recovery to your device and flash it.
Lastly you can restore your phone by flashing official firmware that previously worked on your phone and then try flashing lollipop update with a fresh start.
Let me know for any other assistance
This is really urgent. I wanted to unroot my tmobile 5.1.1 s6, but it wouldn't work. So I factory reset it. I was able to boot and everything seemed fine, but the custom kernel was still installed. Then I restarted the phone, but it will not get past the boot logo. It says the kernel is not supported by seandroid and then says below it that custom binary was blocked by FAP. Please help I need my phone.
It's fine! this has happened to me too!
Just go ahead and download ODIN and the latest firmware for the device.
On your device, boot into Download mode. Hold down Home Button, Power Button, Vol. Down Button together until it pops up a cyan colored screen and just press the Vol. Up Button.
Then, flash the firmware through ODIN using the AP section to select the firmware.
After that, make sure that auto-reboot, F. Time Reset, and Nand Erase All is checked under options.
Just click start and it should start flashing everything.
This is a link to the latest firmware for the T-Mobile S6, scroll down to post #2: http://forum.xda-developers.com/tmo...firmware-g920tuvu3doi1-g920tuvu2doh6-t3213001
EDIT: It should be noted that this link is for the normal S6 (not the s6 edge). Go to Sammobile if you have the S6 Edge, I haven't managed to find a post with the latest firmware for the s6 edge.
Hey Guys. after i fixed my softbrick, i got an other problem.
I tried again to install CM13 on my device (SM-G925F) but it doesn't work and i get all the time a softbrick.
here the Steps which im going.
1. Install new android with Kies3
2. Flash twrp-3.0.2-0-zerolte
3. Wipe Cashe and ...
4. (1 time i done that and 1 time is skipped it, but the same problem) i flashed SuperSU-v2.78-201609011115 via TWRP
5. Flash cm-13.0-20151221-UNOFFICIAL-zeroltexx
6. Flash open_gapps-arm64-6.0-super-20160923
But if im going to reboot my device, it stucks in the bootmode Where you can see "Samsung Galaxy S6 edge ... powered by android" and in the left upper corner you can see in red "KERNEL IS NOT SEANDROID ENFORCING"
What can i do, to flash CM13 on my device?
exory666 said:
Hey Guys. after i fixed my softbrick, i got an other problem.
I tried again to install CM13 on my device (SM-G925F) but it doesn't work and i get all the time a softbrick.
here the Steps which im going.
1. Install new android with Kies3
2. Flash twrp-3.0.2-0-zerolte
3. Wipe Cashe and ...
4. (1 time i done that and 1 time is skipped it, but the same problem) i flashed SuperSU-v2.78-201609011115 via TWRP
5. Flash cm-13.0-20151221-UNOFFICIAL-zeroltexx
6. Flash open_gapps-arm64-6.0-super-20160923
But if im going to reboot my device, it stucks in the bootmode Where you can see "Samsung Galaxy S6 edge ... powered by android" and in the left upper corner you can see in red "KERNEL IS NOT SEANDROID ENFORCING"
What can i do, to flash CM13 on my device?
Click to expand...
Click to collapse
I thought 925f not yet supported.
Sent from my SM-G925F
My phone model is a SM-G925F and I tried installing xposed via the apk file (XposedInstaller_3.1.apk) from the thread below:
The version is 5.0.2
http://forum.xda-developers.com/showthread.php?t=3034811
After I installed the apk I downloaded the file by clicking the download button in the app. After the download is finished it asked me to reboot and so i did. Afterwards, my phone got into a boot loop. At this point I managed to boot into TWRP recovery mode. Tried factoring resetting, wiping cache and dalvik and rebooted, still stuck on bootloop.
Afterwards I plugged in my phone into my computer whilst trying to find a solution online. After plugging it out i noticed that my phone was stuck on the "charging" screen which led me to press all buttons at once in an attempt to shut down my phone. What happened was that now its stuck on the "Samsung Galaxy S6 Edge" booting screen (not the animated Samsung one) and it wont even shut down or let me access recovery mode, only download mode. I tried force shutting down again (holding down both volume keys and power button) and all it did was give me a never ending cycle of black screens and "Samsung Galaxy S6 Edge" boot screen. Right now my phone is stuck on the S6 Edge boot screen.
I'm thinking of just using ODIN and installing the firmware via download mode. Either that or I'm just gonna wait for the battery to run out and get into recovery mode that way (not sure what I'm gonna do once I'm in). If someone can give me suggestions on what to do in the situation I'd greatly appreciate it!
Download smart switch on your computer and put your phone into download mode. Flash the stock firmware from smart switch.
deandramuhammed said:
My phone model is a SM-G925F and I tried installing xposed via the apk file (XposedInstaller_3.1.apk) from the thread below:
The version is 5.0.2
http://forum.xda-developers.com/showthread.php?t=3034811
After I installed the apk I downloaded the file by clicking the download button in the app. After the download is finished it asked me to reboot and so i did. Afterwards, my phone got into a boot loop. At this point I managed to boot into TWRP recovery mode. Tried factoring resetting, wiping cache and dalvik and rebooted, still stuck on bootloop.
Afterwards I plugged in my phone into my computer whilst trying to find a solution online. After plugging it out i noticed that my phone was stuck on the "charging" screen which led me to press all buttons at once in an attempt to shut down my phone. What happened was that now its stuck on the "Samsung Galaxy S6 Edge" booting screen (not the animated Samsung one) and it wont even shut down or let me access recovery mode, only download mode. I tried force shutting down again (holding down both volume keys and power button) and all it did was give me a never ending cycle of black screens and "Samsung Galaxy S6 Edge" boot screen. Right now my phone is stuck on the S6 Edge boot screen.
I'm thinking of just using ODIN and installing the firmware via download mode. Either that or I'm just gonna wait for the battery to run out and get into recovery mode that way (not sure what I'm gonna do once I'm in). If someone can give me suggestions on what to do in the situation I'd greatly appreciate it!
Click to expand...
Click to collapse
You have tried to flash the wrong version of xposed. The one from that thread isnt compatible you need the xposed unofficial by wanam from here
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960/page562
What i would suggest now is to flash stock firmware to resolve the bootloop.
Then flash twrp.
Then flash xposed from the thread above.
Flash through twrp and your good to go
callumbr1 said:
You have tried to flash the wrong version of xposed. The one from that thread isnt compatible you need the xposed unofficial by wanam from here
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960/page562
What i would suggest now is to flash stock firmware to resolve the bootloop.
Then flash twrp.
Then flash xposed from the thread above.
Flash through twrp and your good to go
Click to expand...
Click to collapse
It's all good now, my phone is fixed. Thanks for the help!