Boot problem (Bricked?) Alcatel Pop 4 (5051x) - Android Q&A, Help & Troubleshooting

Good afternoon. I tell my problem.
Upon receiving mobile I decided to apply some improvements on your Android 6.0 system.
The first thing I did was root with Kingoroot, install Flashify to change the recovery; I do around here because they seem to have any accessible recovery. Once I install Titamium programs such as backup and Xposed and everything worked perfect.
I made a backup with recovery installed TWRP 3.0.2-0, a microSD 64 Gbytes and try to check it and restore the copy appears the message "Error extractTarFork () process ended with error: 25".
Since then switched on, enters a loop with minimal screen flash, short vibration and so on cyclically. I have made several attempts:
- I enter recovery (vol + power on) and try to install roms from PC with recovery sideload with adb sideload, but the downside is that I can not find any specific rom of this mobile and other snapdragon 210 Roma does not work.
- Another method was through Mobile Upgrade Q - Alcatel Mobile Phones, put it in Download mode (power on + vol up + vol down) in coming, but when connected to the USB computer when leaving the Download mode and enters the same loop described above.
I would be grateful for any help or idea they could think of. If someone could get a rom of this mobile in zip to install through sideload adb I think it would be the ultimate solution.
Thanks in advance.

Some tips:
Using Mobile Upgrade Q: Turn your phone off and leave to charge until full. Then use Mobile Upgrade Q.
Also, send me a PM and I'll give you the stock partitions and tools to flash them back from windows (No Mobile Upgrade Q Needed)

I tried with Mobile Upgrade Q
I tried to recover with the Mobile Upgrade Q, enters Download mode but jumps back to a loop with a little buzz that is repeated every 2-3 seconds.
The only way I can think of after many tests is to install the rom abd through sideload from the TWRP, then try to load roms other phones with the same processor but ultimately fails.
How can I send you MP?

Hello bro
Can you help me get these partitions please?
PM is bor working for me, don't know why, tried to pm you already

luispelau said:
I tried to recover with the Mobile Upgrade Q, enters Download mode but jumps back to a loop with a little buzz that is repeated every 2-3 seconds.
The only way I can think of after many tests is to install the rom abd through sideload from the TWRP, then try to load roms other phones with the same processor but ultimately fails.
How can I send you MP?
Click to expand...
Click to collapse
Hi if u have twrp, installed I could send u backup of my pop 4

I had the same problem and I managed to unbrick the phone by using this solution I found on XDA.
Go into TWRP recovery. Then click on Advanced. Then click on Terminal and type
echo SYSTEMLESS=true>>/data/.supersu
After that flash SuperSu and reboot the phone. It bootloops once, but after that it boots normal again.

Need help? T.me/pop4uk

mygadgetgeek.com said:
Hi if u have twrp, installed I could send u backup of my pop 4
Click to expand...
Click to collapse
Hey bro, could you send me a backup, i accidently wiped the system and i cant find any stock rom out there, im desperate pls

KieranFoot said:
Some tips:
Using Mobile Upgrade Q: Turn your phone off and leave to charge until full. Then use Mobile Upgrade Q.
Also, send me a PM and I'll give you the stock partitions and tools to flash them back from windows (No Mobile Upgrade Q Needed)
Click to expand...
Click to collapse
Hi,
i know its old but i need the Nonhlos.bin (modem) for 5051x marshmallow. can you please post it here ?
it would be a great help. thanks

Yeah I have a 5051X And its boot freezing not looping should I start a new thread or this gonna need a recovery image like in the OP. I have contacted alcatel supoort to see if they have the flash image but its sunday and I expect that they are closed.
I followed some instructions re rooting my 5051X which involved installing kingroot, obtaining temporary root then using flashy to flash twrp recovery onto the device, I could never update the recovery image and I assume thats because I havn't unlocked my phone yet.
Went to remove kingroot and find it cannot be uninstalled.
So i paid for Supersume (https://play.google.com/store/apps/details?id=darkslide.com.supersumepro&hl=en) and ran that to remove kingroot(i'll prolly reinstall later to follow the guide but dont really trust the application after my lockscreen changed on its own).
Supersume seemed to complete successfully.
Then I decided to reboot the device to see if root had disappeared again after reboot but am now stuck at the alcatel screen for the last 10 mins. Looks like i'm gonna have to pull the battery to shut it down, shame I only had it around a week.

Related

[Q] booting problem in karbonn a30 after flashing new rom

Hi Friends,
My Karbonn A30 has bricked. I did so many experiment on my phone and also stucked several time with some problem but i did solved that problems. Unfortunately this time i am helpless with my phone.Now i am going to explain you what i did with my phone and what problem i am facing.
NOTE: My phone was rooted by using "Root_with_Restore_by_Bin4ry_v18" process.
Two days back i flashed TITAN MOBILE ROM in my Karbonn A30 but that was unsuccessful,After that my phone was not able to boot and also it was not able to boot in recovery mode using Volume up + Power key. Then with some R&D i get a new option using Volume Down + Power key that option is for my mobile hardware test. In that option i formatted my "emmc" then after my phone was able boot in CWMR recovery mode.Then i wiped my all data and system using CWM Recovery,Also did Restore factory.
After that i was regularly getting error message on my phone notification " Phone storage corrupted,Format it" Then i formatted that. Then i installed my all apps from by apps_backup. When i rebooted my phone,again i was getting same error message and didn't any option except format it.
Then i decide to check this error after unrooting my phone. So i remove root access. After that i was not getting this error.
Yesterday again i rooted it with same process and again i was getting same error message after installing apps and reboot my phone.
then i decided to flash new rom with same company phone(Karbonn). So i got ROM for Karbonn S5 from google. I flashed that successfully on my phone i was very happy because this rom was having Jellybean OS(4.1.2). But after some time apps started crashing when i logged in my phone using my gmail as usual i did after every factory reset.
Then i re-flashed the same rom(Karonn S5). This time i decided to do factory reset using phone setting before loggin in google account.
That was my blunder mistake. After pressing factory reset my phone got stuck in boot screen.
Then i tried same option to solve it (Volume down + power ) so i can format emmc again to resolve it. But this time after formatting emmc i was in the same condition on boot looping.
I am not able to go in recovery option using my phone key.
I need you help, i can not go service center because i voided my warranty.
NOTE: Currently my phone is not rooted,I checked it using ADB commands. My USB DEBUGGING is showing on but when i put my phone in" phone hardware check mode( using Volume Down + Power key)".
Plz HELP ME TO SOLVE IT.
djhot143 said:
Hi Friends,
My Karbonn A30 has bricked. I did so many experiment on my phone and also stucked several time with some problem but i did solved that problems. Unfortunately this time i am helpless with my phone.Now i am going to explain you what i did with my phone and what problem i am facing.
NOTE: My phone was rooted by using "Root_with_Restore_by_Bin4ry_v18" process.
Two days back i flashed TITAN MOBILE ROM in my Karbonn A30 but that was unsuccessful,After that my phone was not able to boot and also it was not able to boot in recovery mode using Volume up + Power key. Then with some R&D i get a new option using Volume Down + Power key that option is for my mobile hardware test. In that option i formatted my "emmc" then after my phone was able boot in CWMR recovery mode.Then i wiped my all data and system using CWM Recovery,Also did Restore factory.
After that i was regularly getting error message on my phone notification " Phone storage corrupted,Format it" Then i formatted that. Then i installed my all apps from by apps_backup. When i rebooted my phone,again i was getting same error message and didn't any option except format it.
Then i decide to check this error after unrooting my phone. So i remove root access. After that i was not getting this error.
Yesterday again i rooted it with same process and again i was getting same error message after installing apps and reboot my phone.
then i decided to flash new rom with same company phone(Karbonn). So i got ROM for Karbonn S5 from google. I flashed that successfully on my phone i was very happy because this rom was having Jellybean OS(4.1.2). But after some time apps started crashing when i logged in my phone using my gmail as usual i did after every factory reset.
Then i re-flashed the same rom(Karonn S5). This time i decided to do factory reset using phone setting before loggin in google account.
That was my blunder mistake. After pressing factory reset my phone got stuck in boot screen.
Then i tried same option to solve it (Volume down + power ) so i can format emmc again to resolve it. But this time after formatting emmc i was in the same condition on boot looping.
I am not able to go in recovery option using my phone key.
I need you help, i can not go service center because i voided my warranty.
NOTE: Currently my phone is not rooted,I checked it using ADB commands. My USB DEBUGGING is showing on but when i put my phone in" phone hardware check mode( using Volume Down + Power key)".
Plz HELP ME TO SOLVE IT.
Click to expand...
Click to collapse
Problem has been solved but i am very much unhappy with XDA forum because i am not getting any solution from XDA about my Karbonn A30.
karbon a30 unbrick
djhot143 said:
Problem has been solved but i am very much unhappy with XDA forum because i am not getting any solution from XDA about my Karbonn A30.
Click to expand...
Click to collapse
I think you need so flash tool of mtk download it and install mtk vcom drivers of your phone in PC And download twrp recovery of cherry mobile titan TV download it you need scatter loading file I can give you links of all above files and full procedure when you download twrp recovery select scatter file in so flash tool and untick all only tick recovery click on recovery and select twrp recovery when you done all things you can pull out your phone battery and disconnect USB pull out the battery some seconds and replace it and connect usb and press f9 and recovery will flash then I will give you nandroid backup okk
---------- Post added at 08:14 AM ---------- Previous post was at 08:09 AM ----------
prince khurana said:
I think you need so flash tool of mtk download it and install mtk vcom drivers of your phone in PC And download twrp recovery of cherry mobile titan TV download it you need scatter loading file I can give you links of all above files and full procedure when you download twrp recovery select scatter file in so flash tool and untick all only tick recovery click on recovery and select twrp recovery when you done all things you can pull out your phone battery and disconnect USB pull out the battery some seconds and replace it and connect usb and press f9 and recovery will flash then I will give you nandroid backup okk
Click to expand...
Click to collapse
the link of mtk drivers: forum.gsmhosting.com/vbb/f457/how-install-mtk-driver-windows-xp-vista-7-a-1662956/
signature verification problem
sir,
i also try this ROM in my karbonn a30 ..and also new 4.2 rom
but i got error message
E: signature verification failed
installation aborted.
please tell me how to solve it
my process
i rooted my mobile
power + volume up
then update rom from sd card
update....
E: signature verification failed
installation aborted.
error
plz help me
djhot143 said:
Problem has been solved but i am very much unhappy with XDA forum because i am not getting any solution from XDA about my Karbonn A30.
Click to expand...
Click to collapse
bro i have rooted my Karbonn A30.while changing the font it will restart and now its only showing boot screen plz help me what can i do??
fix
patilprashant777 said:
bro i have rooted my Karbonn A30.while changing the font it will restart and now its only showing boot screen plz help me what can i do??
Click to expand...
Click to collapse
reflash the stock rom
or do factory reset

[Q] Help needed: galaxy young stuck in cwm loop

Hi all,
I need some help please.
I tried to root my sons galaxy young S6310N using a video on you tube
However at the 4.41 point I didnt have the yes- root option.
I themn rebooted and it went back into CWM recovery. v6.0.3.2
It's been stuck in this for 2 days now, I have searched everywhere for a solution but I'm lost now. I have information overload I think.
I have tried to install drivers through Kies but it won't recognise my phone in CWM recovery or in download mode.
I have tried to install a custom rom via sd card, it seems to work but reboots into CWM again.
I fear I may have made a mess of it now by messing around with things I know nothing about. I panicked really.
The phone was running jelly bean and is only a week old.
I can get adb but not sure how to use it properly.
Could someone please help?
Thanks in advance
sorted it myself
Hi, just in case anyone was interested I managed to sort this.
I put phone into download mode (holding vol - & menu & power) then pressed up at logo screen to enter download mode.
My pc then installed drivers automatically (something I had been struggling with in CWM recovery mode)
I then installed stock rom recovery.tar.md5 file using odin and the phone rebooted as normal.
I have given up trying to root it now, I may learn properly before attempting again, or may leave it.
Search for your device first before making a thread..!!
driller66 said:
Hi, just in case anyone was interested I managed to sort this.
I put phone into download mode (holding vol - & menu & power) then pressed up at logo screen to enter download mode.
My pc then installed drivers automatically (something I had been struggling with in CWM recovery mode)
I then installed stock rom recovery.tar.md5 file using odin and the phone rebooted as normal.
I have given up trying to root it now, I may learn properly before attempting again, or may leave it.
Click to expand...
Click to collapse
Good..but always use recovery for ur phone only..or make it for ur phone..
And do any changes in stock ROM after creating a BACKUP of the same..
ROOTING is not a difficult now-a-days but overcoming from the loss of time and data after BRICKING is so painful.
If you are not friendly with the commands and codes then use a software for that or follow up the WRITTEN guide..or use FARMAROOT app.
Head to thread...Thanks Mr. Bin4ry for this awesome method:
Rooting almost every phone
Enjoy..!!

Huawei u9510e brick

I've search long and hard ..to no avail. I have a huawei ascend d1 qaud u9510e. Its had a chinese custom recovery and was flashed with MIUI 3.2.22. From the UPdater miui i've been spammed by to do a 'weekly update'' on a daily basis. I read it , it said it didnt delete internal and minimum problem would happen. So I did it. It went through the install phone rebooted. it worked one time till I restarted phone. now i am unable to get back .All i see is the HUAWEI start up logo. it just hangs there. the phone wont turn off just restarts itself to that screen, I am unable to get to custom recovery by holding the power button + volume + which etc. I have the original miui 3.2.22 on my sd card but cannot get to that because of this bootloop/cannot access reovery mode. majority of the time my computer will not reogonize my device but sometimes my computer recognize my phone as adb. How Can I fix it so I can get to a recovery so I can reflash to previous working rom. thank you for your time
T2av said:
I've search long and hard ..to no avail. I have a huawei ascend d1 qaud u9510e. Its had a chinese custom recovery and was flashed with MIUI 3.2.22. From the UPdater miui i've been spammed by to do a 'weekly update'' on a daily basis. I read it , it said it didnt delete internal and minimum problem would happen. So I did it. It went through the install phone rebooted. it worked one time till I restarted phone. now i am unable to get back .All i see is the HUAWEI start up logo. it just hangs there. the phone wont turn off just restarts itself to that screen, I am unable to get to custom recovery by holding the power button + volume + which etc. I have the original miui 3.2.22 on my sd card but cannot get to that because of this bootloop/cannot access reovery mode. majority of the time my computer will not reogonize my device but sometimes my computer recognize my phone as adb. How Can I fix it so I can get to a recovery so I can reflash to previous working rom. thank you for your time
Click to expand...
Click to collapse
you must download U9510E B610 EMUI 2.0 by svikfromorel v02 for XDA search for this in the forum i cant post any link...
unpack, connect the phone to PC and run Flash_all.bat file
after ending a proccess don't forget do wipe data and wipe cache
huawei u9510e bricked
eldukex1 said:
you must download U9510E B610 EMUI 2.0 by svikfromorel v02 for XDA search for this in the forum i cant post any link...
unpack, connect the phone to PC and run Flash_all.bat file
after ending a proccess don't forget do wipe data and wipe cache
Click to expand...
Click to collapse
Hi, I am a newbie to flashing custom Roms. I desperately need help. I have the same phone and the same thing happened to me while trying to flash a ROM. My screen was stuck on huawei logo. Unfortunately, it happened in the middle of the high so by the morning the battery got drained completely. What are my options if any? Please help. I am willing to pay. Thanks a lot in advance.

Bricked Honor 7 After flash superSU phone doesn't start

Hi all,
I unblocked my honor 7 PLK-L01 okay,
but when i tried to flash the superSU, to get rooted, after reboot, it never wants to reboot.
I tried:
1- I tried like the manual saying, (press volumeUp+volumeDown+power), then after the first image, i release the power and keep up+down presses,
But instead of going to recovery, the phone keep restarting.
2- i tried to press volumeUp+power, then keep pressing on volumeUp, but also the phone keep restarting,
How ever I can go to bootloader mode, if i press voluemDown.
but when i flashed another twrp, nothing change.
Can someone help please, the phone even stuck on the starting, and can't be recognized as mtp on compter,
or can't goto recovery_mode
Thank you in advance
i think you are kinda messed it up..
you should not flash any thing except stock firmware using emui recovery..
only solution: try and flash twrp again and again to check if it installed correctly.. or send a pic of what it says in the command window when you try to flash twrp..
or you can even try to put an update.app under a dload folder of your sd card and try to flash(do it if you have emui recovery..remember try any other firmware.. not the one you alredy tried)
you should always read forums and look into various things you are not sure about before you even download superSU.zip.... you should try install twrp do full wipe and install rom THEN reboot and you should be fine. make sure that rom is made for your device...

Guide to return back to Indian Stock (C675) on V10 from any Custom ROM

Many of us are on custom OS and want to return back to stock Indian OS which was not possible till now. Below posted is a tried and tested method by me as well as my friend @ankan1993.
I assume you are unlocked BL and your device is atleast not bricked.
Please follow this guide step by step to get a stock working device. This is for Honor V10 Indian Version C675 and I'm not responsible for your loss if you make this worst by trying this on other variants/models or if you choose not to follow this guide properly.
I assume you are on Berkley TWRP with the latest version, unmodified one.
Downloads : (Keep both in your fastboot folder in PC)
Stock Recovery : https://drive.google.com/file/d/1WEUHRrba1dV3109e7h7b3Hp_aJhy0vM8/view?usp=sharing (stockrec.img)
Stock System Image : https://drive.google.com/file/d/1IABtk7HJ9ml6kOpytYHrnT6z3C1_9IfW/view
1. Enter TWRP and go to wipe -> Advanced -> Select system and data, and wipe them.
2. In TWRP, go back and Click Reboot button on main screen and reboot to Bootloader.
3. Connect you device and open cmd_here (open as administrator) from fastboot folder. ( I assume fastboot is installed and working in your system. You can check by the command "fastboot devices" . Device should show there. )
4. Type "fastboot flash recovery_ramdisk stockrec.img" (It should complete without error)
5. Once completes, Type "fastboot flash system system.img" (This may show error like "Invalid sparse file format". Ignore that and keep waiting for 10-12 minutes until the system gets flashed completely.)
6. Once it gets completed, disconnect your device and then press Vol up + power, until it screen shows stock recovery.
7. In stock recovery, use factory reset and cache wipe option one by one and then reboot.
Hit thanks if you think it helped :fingers-crossed:
Finally, after days, after being tormented by the bugs of custom Roms we have something to cheer about. Kudos Oreopie! Cheers to the long hours.
Kudo's bro.. appreciate your efforts :good:
Will this method also lock the Bootloader to stock?
vardaraju said:
Will this method also lock the Bootloader to stock?
Click to expand...
Click to collapse
No, It won't.
Im unable to access bootloader/recovery mode after unlocking bootloader with volume down+power button, used twrp option to reboot to bootloader, but now i flashed stock recovery and this system image, device bootlooped and im unable to access bootloader, i hold the keys but instantly that warning screen comes up, please help..started using android since 2010 with HTC desire HD and never in my life i stepped in service center because those devices were brick proof, looks like honor made me step into service center
didnt work for me, followed exact steps as mentioned above but stock recovery keeps giving error while factory resetting the device, device ends up in bootloop,, this device is crazy, i need to connect my device to pc and then press voldown+ power to access bootloader else it just jumps to warning screen
aditya desai said:
didnt work for me, followed exact steps as mentioned above but stock recovery keeps giving error while factory resetting the device, device ends up in bootloop,, this device is crazy, i need to connect my device to pc and then press voldown+ power to access bootloader else it just jumps to warning screen
Click to expand...
Click to collapse
Obviously warning screen will come up, but at the same moment you have to just leave power button and keep on pressing vol down button, until you get into bootloader mode. It takes time bro and let me tell you one thing, no matter which mode you boot, no matter what ROM it is, once the bootloader is unlocked it implies that the unlocked warning screen will show and then it will be allowed to get into whatever mode you wish.
Try it as I told, be patient and follow the same guide exactly if you do not wish to visit service centre. There is nothing wrong happening with you other than an improper method being followed in haste
aditya desai said:
Im unable to access bootloader/recovery mode after unlocking bootloader with volume down+power button, used twrp option to reboot to bootloader, but now i flashed stock recovery and this system image, device bootlooped and im unable to access bootloader, i hold the keys but instantly that warning screen comes up, please help..started using android since 2010 with HTC desire HD and never in my life i stepped in service center because those devices were brick proof, looks like honor made me step into service center
Click to expand...
Click to collapse
In cases of a bootloop, follow this- https://forum.xda-developers.com/ho...ustom-rom-to-stock-rom-honor-view-10-t3802872
will the system image work on honor 7x??
Can you share the screenshot of the about phone screen please
Anyone got it working? the stock recovery keeps showing error when factory resetting the device, error shows some where at 12%, it just shows exclamation mark, ROM doesn't boots up
Not working!
Rj_Param said:
Not working!
Click to expand...
Click to collapse
What is the issue and what you want to do.
shashank1320 said:
What is the issue and what you want to do.
Click to expand...
Click to collapse
I am on lineage and want to go back to the stock ROM. I also have backup of my system but i have tried many times after flashing the system image it is going in boot loop so i have followed all methods and it's not working..
Every time i have tried after flashing system whenever i go to recover to do factory reset it failed. Even i tried to lock the bootloader but nothing seems to be working.
Rj_Param said:
I am on lineage and want to go back to the stock ROM. I also have backup of my system but i have tried many times after flashing the system image it is going in boot loop so i have followed all methods and it's not working..
Every time i have tried after flashing system whenever i go to recover to do factory reset it failed. Even i tried to lock the bootloader but nothing seems to be working.
Click to expand...
Click to collapse
Because on custom you are on 8.1 and twrp doesn't support yet.
May be you can try dload the b161 version which is out on firmware finder now.
shashank1320 said:
Because on custom you are on 8.1 and twrp doesn't support yet.
May be you can try dload the b161 version which is out on firmware finder now.
Click to expand...
Click to collapse
I'll give it a try today...thanks
Invalid
as you mentioned, i m getting this error "invalid sprase file format". I waited more than 30 mins, still i couldn't see any message like compeleted or success. Still showing only that error "invalid spase file format". Help me with this.
Tamilarasan_Indian said:
as you mentioned, i m getting this error "invalid sprase file format". I waited more than 30 mins, still i couldn't see any message like compeleted or success. Still showing only that error "invalid spase file format". Help me with this.
Click to expand...
Click to collapse
Invalid sparse error happens when trying to flash .IMG files in Windows system.
It can be easily solved by using Linux system.
thanks for the reply
miststudent2011 said:
Invalid sparse error happens when trying to flash .IMG files in Windows system.
It can be easily solved by using Linux system.
Click to expand...
Click to collapse
I dont have Linux , and tried to flash other SYSTEM.img file for honor v10 from other threads. It completed flashing but still am not able to login into phone successfully. Still stuck at bootloop. Help me

Categories

Resources