Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about doing this to your device
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Download:
3.2.1-0
Old:
3.2.1-0 - Old kernel
3.0.2-1
Kernel Source:
https://github.com/Exynos7870/android_kernel_samsung_exynos7870
Installation:
Check oem unlock in developer settings
Boot into download mode (Hold Power + both volume buttons)
Flash with ODIN 3.10.7 in the AP slot.
Uncheck Auto reboot.
Load the respective file below into the AP slot and hit start.
After flashing immediately reboot to recovery by holding POWER + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding the power button.
You should now see TWRP recovery.
Credits:
@ashyx for getting it booting initially
Bugs/not working:
None
This has only been tested on the wifi only variant
deadman96385 said:
Bugs/not working:
MTP is untested
This has only been tested on the wifi only variant
Click to expand...
Click to collapse
Have you been able to root your View?
justjayhere said:
Have you been able to root your View?
Click to expand...
Click to collapse
Yep
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
deadman96385 said:
Yep
Click to expand...
Click to collapse
How do I go about rooting the View?
justjayhere said:
How do I go about rooting the View?
Click to expand...
Click to collapse
Just flash the latest SuperSU in twrp, I can't guarantee it works on the LTE variants because no one has tested it on it.
custom recovery blocked by frp lock
Must unlock bootloader in Developer settings OEM unlock
Has anyone tried it on LTE version yet?
dia said:
Has anyone tried it on LTE version yet?
Click to expand...
Click to collapse
I don't believe so... I have the Verizon View... but there isn't a firmware available; to revert to, in the event it doesn't work.
Verizon LTE
Does not work with Verizon LTE variant, fails in Odin regardless of version used or developer options ticked.
Slick Willy said:
Does not work with Verizon LTE variant, fails in Odin regardless of version used or developer options ticked.
Click to expand...
Click to collapse
Thanks for the info
justjayhere said:
Thanks for the info
Click to expand...
Click to collapse
I just tried on my att version with no luck. It also failed in Odin.
Has anyone tried changing to a different version of the firmware using ODIN and then installing TWRP?
This one looks the most up to date:
Galaxy View LTE SM-T677 SER T677XXU1APG1 Android 5.1.1 05.07.2016
It can be downloaded here:
http://samsung-updates.com/device/?id=SM-T677
I am guessing you'd have Russian language after switching firmware, but should be able to go back to English once you reboot.
I'd also imagine clearing cache from recovery after the new firmware installs would help aviod a bootloop.
If anyone is daring enough to try this let me know if it works.
I think installing supersu from TWRP after you install it could give root access.
holy moly we got root now i gonna wait a bit for OTG/MTP I using my USB OTG on my view (WiFi) to watch anime/movies offline 32GB is not enough storage lolz
Thanks for your work.
Buuut maybe a stupid question...Anyone an idea why i can not access the download mode by pressing Power+Vol Down to flash twrp with odin?! Everytime Viewstarts normal - Bootloader is unlock in developer settings.
Power+Vol Up stock Recovery starts...?!?
What did I am wrong?!
MajorWinters said:
Thanks for your work.
Buuut maybe a stupid question...Anyone an idea why i can not access the download mode by pressing Power+Vol Down to flash twrp with odin?! Everytime Viewstarts normal - Bootloader is unlock in developer settings.
Power+Vol Up stock Recovery starts...?!?
What did I am wrong?!
Click to expand...
Click to collapse
I had the same problem, but you can use this little program to enter into downloadmode, just click on the picture on the left side and it will boot into bootmode/odin mode.
Thanks @DoubleR for the little Programm!
Now TWRP ist installed and root access too! Thanks a lot @deadman96385
Slick Willy said:
Does not work with Verizon LTE variant, fails in Odin regardless of version used or developer options ticked.
Click to expand...
Click to collapse
justjayhere said:
Thanks for the info
Click to expand...
Click to collapse
MajorWinters said:
Thanks for your work.
Buuut maybe a stupid question...Anyone an idea why i can not access the download mode by pressing Power+Vol Down to flash twrp with odin?! Everytime Viewstarts normal - Bootloader is unlock in developer settings.
Power+Vol Up stock Recovery starts...?!?
What did I am wrong?!
Click to expand...
Click to collapse
DoubleR said:
I had the same problem, but you can use this little program to enter into downloadmode, just click on the picture on the left side and it will boot into bootmode/odin mode.
Click to expand...
Click to collapse
I had the same thing but i figured out if you hold power + both volume buttons it will boot into download mode.
Edit: Added that into the install instructions so that won't happen to other people
I did all of the above and I can't get it to work on my wifi SGV. I', in Windows 10 and it just fails after 1 second.
any plans update for it?
Anyone who has rooted the galaxy view tried to install Stick Mount to get the OTG working?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3.0.0
BETA VERSION
Before to start flashing
This is an experimental Touch version of TWRP, so this means that have bugs that i hope to fix soon. So use it carefully at your own risk. The mosti important thing to say, after flash this recovery,is ....
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Installation Guideline
Be sure that your boot loader is unlocked.
Power down your phone and go in fastboot mode.
Use a shell that recognize fastboot command and digit
Code:
fastboot flash recovery recovery.img
After flash is finished, remove the cable. Then Press the Power Btn + Lower Volume Button for some secs, then release.
Enjoy it
What works
Mount automatically system, boot, data and cache partitions at boot
Backup
Restore
Touchpad
SD Card Mount
Full reboot options
Full selinux support
ADB supported
What not works
Some minors stuffs
Download
M4 Aqua ProjectMarshmallow Official Site
Bug Channel
Please report any bug and issues here!
http://projectmarshmallow.altervista.org/bug-channel/
XDA:DevDB Information
TWRP Recovery 3.0.0, Tool/Utility for the Sony Xperia M4 Aqua
Contributors
tonystark88
Source Code: https://github.com/ProjectMarshmallow/
Version Information
Status: Beta
Current Beta Version: 1
Beta Release Date: 2016-02-11
Created 2016-02-11
Last Updated 2016-03-29
Link available in the download page on my site! Please test it taking care of the button sequence to boot the new recovery.
hey Bro
on E2333 dual sim not working
Just black screen then reboot automatically...
on Bl unlocked and rooted device
Its nice.the only problem is that you cannnot reboot to recovery.
how about twrp 3.0.0.0
Martia.Qa said:
hey Bro
on E2333 dual sim not working
Just black screen then reboot automatically...
on Bl unlocked and rooted device
Click to expand...
Click to collapse
I hope someone else could confirm this issue. If also others have this, probably is a kernel issue.
What's the difference between this version and your old one?
Edit: I also get a black screen
I don't get black screen
ardentis said:
What's the difference between this version and your old one?
Edit: I also get a black screen
Click to expand...
Click to collapse
it's just compiled from CM13 sources and has a new graphics and functions.
Just two info:
- for people who works, please say in the response what model you're using (ex E2303,2306...ecc)
- for people that this not works, be sure that after you got black screen, you long press up volume and the per button while screen starts to blink.
tonystark88 said:
Just two info:
- for people who works, please say in the response what model you're using (ex E2303,2306...ecc)
- for people that this not works, be sure that after you got black screen, you long press up volume and the per button while screen starts to blink.
Click to expand...
Click to collapse
E2306
I can't neither make backups
It just restarts in any progress
Okay it works fine now. It's just weird to use the key combo
E2303: works, but reboots when creating backup and date doesn't detect currently.
The instructions work on my E2306.
cant boot normally
booting into twrp works fine for me but when i try to boot the system normally theres just a blackscreen.
Modell: E2303 Firmware : .167
Edit: I just failed the flash. its working fine for me now
BlackScreen Model E2303 Firmware 26.1.A.2.167 find on XDA
Nothing works to reboot the only can disconnet the battery to rebot butt it's not waterproof now
all for a Xposed is not working
MystikMan97130 said:
BlackScreen Model E2303 Firmware 26.1.A.2.167 find on XDA
Nothing works to reboot the only can disconnet the battery to rebot butt it's not waterproof now
all for a Xposed is not working
Click to expand...
Click to collapse
Did you know that there is a reset button under the SD card flap? Sorry if it's too late now. And what doesnt work with twrp?
ardentis said:
Did you know that there is a reset button under the SD card flap? Sorry if it's too late now. And what doesnt work with twrp?
Click to expand...
Click to collapse
yes i try with reset button but not works to
Nothing works with TWRP only black screen after vibration
MystikMan97130 said:
yes i try with reset button but not works to
Nothing works with TWRP only black screen after vibration
Click to expand...
Click to collapse
Follow the new directions. When you get to the black screen, press volume up and power until it flashes to the twrp screen
New recovery available on my site! Please update and test it
TWRP has come to the SM-J727P!
In order to install this, follow these instructions:
Enable OEM Unlock in developer settings
Enter download mode (Press and hold home + volDown + Power when powered off)
Using Odin, click the 'AP' tab and select the twrp-3.3.1-1-j7popltespr.img.tar file you've downloaded.
Flash the TWRP image, then hold home + volUp + Power
Congratulations, you are now booted into TWRP!
Remember, on the stock ROM, dm-verity is enabled. What does this mean? If you swipe to allow system modifications, you must flash something that disables dm-verity (such as magisk or a dm-verity disabler.)
Also, on the stock ROM, you MUST format /data before performing any actions, due to the fact that it is force-encrypted by default.
BUGS:
None, as far as I'm aware.
TWRP PAGE
If you appreciate any of what I've done for this device and wish to buy me a coffee or something of the sort, you can donate to me at [email protected] (Paypal)
XDA:DevDB Information
TWRP for j7popltespr, Tool/Utility for the Samsung Galaxy J7
Contributors
minz1
Source Code: https://github.com/TeamWin
Version Information
Status: Stable
Created 2017-10-22
Last Updated 2019-08-06
As proof:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Virgin mobile galaxy J727P
minz1 said:
TWRP has come to the SM-J727P!
In order to install this, follow these instructions:
Enable OEM Unlock in developer settings
Enter download mode (Press and hold home + volDown + Power when powered off)
Using Odin, click the 'AP' tab and select the twrp-3.1.1-X-j7popltespr.tar file you've downloaded.
Flash the TWRP image, then hold home + volUp + Power
Congratulations, you are now booted into TWRP!
Remember, on the stock ROM, dm-verity is enabled. What does this mean? If you swipe to allow system modifications, you must flash something that disables dm-verity (such as magisk or a dm-verity disabler.)
BUGS:
None, as far as I'm aware.
DOWNLOAD
If you appreciate any of what I've done for this device and wish to buy me a coffee or something of the sort, you can donate to me at [email protected] (Paypal)
XDA:DevDB Information
TWRP for j7popltespr, Tool/Utility for the Samsung Galaxy J7
Contributors
minz1
Source Code: https://github.com/Galaxy-MSM8953
Version Information
Status: Stable
Created 2017-10-22
Last Updated 2017-10-22
Click to expand...
Click to collapse
This is great thank you for all your good work !!?
peter couniaz said:
This is great thank you for all your good work !!
Click to expand...
Click to collapse
There's a button made just for thanking ?
Virgin mobile galaxy J727P
minz1 said:
There's a button made just for thanking
Click to expand...
Click to collapse
One question if I'm rooted do have to flash magisk ?
peter couniaz said:
One question if I'm rooted do have to flash magisk ?
Click to expand...
Click to collapse
No.
Virgin mobile galaxy J727P
minz1 said:
No.
Click to expand...
Click to collapse
So fare so good the only issue I see is the file manager in twrp don't seem to work ! Won't show system or much of anything !
peter couniaz said:
So fare so good the only issue I see is the file manager in twrp don't seem to work ! Won't show system or much of anything !
Click to expand...
Click to collapse
You have to go into "Mount" and mount what you wish to view
Virgin mobile galaxy J727P
minz1 said:
You have to go into "Mount" and mount what you wish to view
Click to expand...
Click to collapse
OK very good thanks !
Thank you!!!
Only issues I have noted are the temp reading and brightness doesn't work, but thank you I love this
does this work with g610y?
So to be clear, do I have to format the phone before flashing any zip everytime?
Tyreethetruth said:
So to be clear, do I have to format the phone before flashing any zip everytime?
Click to expand...
Click to collapse
Nope! Format data once to get rid of Samsung's encryption, then once you flash something that disables dm-verity and force encryption you'll be good.
Tyreethetruth said:
So to be clear, do I have to format the phone before flashing any zip everytime?
Click to expand...
Click to collapse
minz1 said:
Nope! Format data once to get rid of Samsung's encryption, then once you flash something that disables dm-verity and force encryption you'll be good.
Click to expand...
Click to collapse
So format data before flashing twrp via odin then flash magisk or format after flashing twrp then flash magisk? Also will flashing supersu also disable dm-verity?
EDIT: I figured it out, thanks for bringing TWRP to this device! Now lets see who can bring lineage(preferably oreo) to this phone.
Tyreethetruth said:
So format data before flashing twrp via odin then flash magisk or format after flashing twrp then flash magisk? Also will flashing supersu also disable dm-verity?
EDIT: I figured it out, thanks for bringing TWRP to this device! Now lets see who can bring lineage(preferably oreo) to this phone.
Click to expand...
Click to collapse
Don't you worry, Lineage is in the works
Where the roms at
Virgin mobile galaxy J727P
jaydriod26 said:
Where the roms at
Click to expand...
Click to collapse
If you want you can try my Deodexed Rom but I'm not a true developer it has one bug so far Auto replace for text does not work so fare ! So give me time an give minz1 some time thank you !
I try and test it out where the link
So would it be a good idea to flash this bootloader on a sm-j727v? Or would it just bootloop? We need root and twrp to lol
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WARNING
I am not a developer. I am a Carpenter who likes tinkering with android.
I am not responsible for bricked devices, dead SD cards,corrupted SD cards
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
Red Wolf Recovery is custom recovery based on TWRP source code however some things are working here slightly different then you might expected. The main objective of this project is to provide stable recovery with features which you have never seen before in a recovery and which have not been accepted for adding to the official source code of TWRP. This recovery is also first recovery on the world with password protection.
DOWNLOADS
http://www.mediafire.com/file/iedk5oezgia6qfh/RedWolf-027-Unofficial-dumpling.img
THANKS
RedWolf Recovery for sources
SimonSickle for the tree
SOURCES
https://github.com/TeamWin/android_device_oneplus_dumpling
https://redwolfrecovery.github.io/
XDA:DevDB Information
RedWolf Recovery Project, Tool/Utility for the OnePlus 5T
Contributors
cospalet
Version Information
Status: Stable
Created 2018-06-22
Last Updated 2018-06-21
I would like to give credit to z31s1g for the theme if you are on regular twrp you can get his theme here
https://forum.xda-developers.com/android/themes/theme-twrp-materialised-dark-light-play-t2915584
And while your there please give him a thanks
This right here was enough to here me to switch permanently. Thanks man! Its great to see some new recoveries
dakotah2468 said:
This right here was enough to here me to switch permanently. Thanks man! Its great to see some new recoveries
Click to expand...
Click to collapse
Is that working? And is it fully functional anyway?
The encryption/decryption options are really confusing here.
If I am decrypted and wants to remain decrypted even after flashing a new rom, which all options should I select? And if options are selected, then there is no need to flash no-verity zip, right?
Wow
RedWolf have Disable Force Encryption option, but i don't think it working... (Mi6 already released RedWolf TWRP, and i checked this option. but mi6 still encryping at first boot... i think decryption user still need flash no_verify_op5_v2 everytime)
anyone can confirm this?
Look very nice.
Garry050 said:
RedWolf have Disable Force Encryption option, but i don't think it working... (Mi6 already released RedWolf TWRP, and i checked this option. but mi6 still encryping at first boot... i think decryption user still need flash no_verify_op5_v2 everytime)
anyone can confirm this?
Click to expand...
Click to collapse
Yes confirmed, still need to flash no verity.
A really cool feature is the subs overlay wipe.
I can attest to having to flash no_verity. I tried with dmverity enabled and disabled and my ROM didn't boot either time. Flashing no_verity remedies it. Great work though. Nice to see people pushing the options to a new level.
Sent from my OnePlus5T using XDA Labs
This TWRP has one more festure-
You can view the queue of all the installation files.
cannot reboot into recovery, phone just freezes
zain0300 said:
cannot reboot into recovery, phone just freezes
Click to expand...
Click to collapse
Yeah that happened to me. Just hold the power button till it turns off then hold power and volume down button to boot back into recovery.
Sent from my OnePlus5T using XDA Labs
i dont know if its with me alone but when i try to reboot when im i recovery the recovery freezes exept when i check reboot when instalation is completed
Wonderful job! I'm amazed, thank you!
Finally a great tool for this great device! Thank you, SIR!
bdwilk said:
Yeah that happened to me. Just hold the power button till it turns off then hold power and volume down button to boot back into recovery.
Click to expand...
Click to collapse
yeah I was able to reboot it. I was just reporting a bug so the op can look into it.
Xokoz said:
Is that working? And is it fully functional anyway?
Click to expand...
Click to collapse
Haven't flashed a new from yet
I flashed stock OB10 thru this recovery and after that, I did not have to flash TWRP again. This TWRP was not overwritten by stock recovery. Thats a +.
ganeshbiyer said:
I flashed stock OB10 thru this recovery and after that, I did not have to flash TWRP again. This TWRP was not overwritten by stock recovery. Thats a +.
Click to expand...
Click to collapse
I can confirm your statement
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Remember this is in early development (alpha)
Not Working:
> Adb Sideloading
> Vibration (minor issue)
> Other Problems: Sometimes when you boot recovery touch not works and only solution is to re-flash TWRP again from Odin, this is kernel issue, we need custom kernel. I found out that in that case you can reboot with usb otg and mouse connected and twrp could start working on next reboot.
Install Instructions
Flash TWRP from Odin on AP Slot & Hold Volume Up + Power while flashing until TWRP appears.
Go to Advanced > Terminal and type "multidisabler" (without quotes", then data wipe.
Now reboot into system, after completing first setup of the device reboot into TWRP again to see if you can see the contents of your Internal Storage, you should, if yes you have successfully disabled Samsung encryption of internal storage.
Downloads (SM-T220): https://github.com/Skorpion96/android_device_samsung_gta7lite/releases/
Downloads (SM-T225): https://github.com/DevZillion/android_device_samsung_gta7lite/releases/tag/v0.1.0_T225
Downloads (SM-T227): https://github.com/DevZillion/android_device_samsung_gta7lite/releases/tag/v0.0.0_T227
Credits to me obviously for testing and recovery tree: https://github.com/Skorpion96/gta7lite_recovery
and to https://github.com/DevZillion for helping with TWRP.
Sources:
Device Tree:https://github.com/Skorpion96/android_device_samsung_gta7lite/tree/main
TWRP:https://github.com/minimal-manifest-twrp/platform_manifest_twrp_aosp/tree/twrp-11
Kernel - Samsung's Stock Kernel built from source.
Flash twrp with Odin which slot ...AP yes Thanks
tom.android said:
Flash twrp with Odin which slot ...AP yes Thanks
Click to expand...
Click to collapse
yes i'll add at the post
Skorpion96 said:
yes i'll add at the post
Click to expand...
Click to collapse
There's one thing not clear enough from the instructions. It says we download the multidisabler...but where do we put it? Or is it already integrated within the TWRP functions?
nirogu325 said:
There's one thing not clear enough from the instructions. It says we download the multidisabler...but where do we put it? Or is it already integrated within the TWRP functions?
Click to expand...
Click to collapse
yes i'll fix
Skorpion96 said:
yes i'll fix
Click to expand...
Click to collapse
That's ok. I will wait until hopefully we get a custom kernel. Touch function didn't work on the first try and when I rebooted back into the GSI, I noticed I could not lower the notification panel as if touch was disabled for that part.
@nirogu325 post fixed
This is in too early development
Zillion said:
This is in too early development
Click to expand...
Click to collapse
added
I'll be adding releases here if SKorpion96 doesn't I don't own the device so don't expect a lot of releases from me.
Releases · DevZillion/android_device_samsung_gta7lite
Contribute to DevZillion/android_device_samsung_gta7lite development by creating an account on GitHub.
github.com
SM-T225 Samsung firmware no root .
Can't showup twrp during flash with odin and press power + volume up simultaneously.
You'll require Magisk v24 Patched AP tar to be able to boot into twrp
Edit: Add the file to AP slot and click Flash on Odin. Start Holding Volume Up + Power until the unlocked bootloader warning appears. Then press Power to remove it and wait for twrp to boot.
tom.android said:
SM-T225 Samsung firmware no root .
Can't showup twrp during flash with odin and press power + volume up simultaneously.
Click to expand...
Click to collapse
patch firmware with magisk
Skorpion96 said:
patch firmware with magisk
Click to expand...
Click to collapse
Magisk v25 or higher will not work.
Booted into recovery but no touch
Difficul said:
Booted into recovery but no touch
Click to expand...
Click to collapse
touch bug, reflash twrp and boot into it again
Difficul said:
Booted into recovery but no touch
Click to expand...
Click to collapse
Maybe we need a t225 specific kernel, the actual kernel is from t220
Zillion said:
Maybe we need a t225 specific kernel, the actual kernel is fro t220
Click to expand...
Click to collapse
but difference between two tablets is sim support, touch shouldn't be an issue. anyway let's see if lapchong would compile kernel of t225
Zillion said:
Maybe we need a t225 specific kernel, the actual kernel is fro t220
Click to expand...
Click to collapse
Of T225 is MT8768T
But in line 3 of system prop is mt6765
Difficul said:
Of T225 is MT8768T
But in line 3 of system prop is mt6765
Click to expand...
Click to collapse
I'll check later. I need t225 and t220 stock recoveries
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download: https://downloads.projectelixiros.com/thirteen/gsi/
Now it's Android 13 PQR2.
-No data lost.
-Google Assistant can make a phone call from your contact.
( This is a special option for Sam Tab, my locked bootloader T875 can't do this.)
Oh ..sorry QPR-2 Google update Can't make a phone call.
-No AOD on charging.
-We can't make R/W system cause its size will bigger than our SM-T22X dynamic partition.
*(If project Elixir is made R/W the image size exceeds 4.6 GB, this unable to flash the GSI into our tab device.)
* The trick --》If you want to mod system, you must flash Stock firmware then all partition will be R/W again. Such as I mod for auto screen brightness before flashing any GSI.
* Offline charging only break error " Warrant bit" and works in the background but ok.
》》Every things good except "Permissive SELINUX".
》》Supported DSU Sideloading App.
》》Download: Attachment
FastbootD for T225XXS3CWC2
Howto
Code:
adb devices
adb reboot fastboot
fastboot flash system ProjectElixir_3.8_arm64_bgN-13.0-20230526-1530-OFFICIAL.img
reboot
New Floating Navigation Menu. ( Works well when Locked Layout mode)
Re-enable themed icons if you have a problem with Icons.
Elixir 3.8 Camera
Bluetooth & Headphone PHH Treble Setting
Next " VAAP "
Use "RO" variant only (not excess dynamic partition size.)
RESERVED: VAAP A13 GSI
NOW WE CAN'T PATCH RECOVERY FOR FASTBOOTD, CAUSE TRANSFER.SH SCRIPT BREAKDOWN.
tom.android said:
RESERVED: VAAP A13 GSI
NOW WE CAN'T PATCH RECOVERY FOR FASTBOOTD, CAUSE TRANSFER.SH SCRIPT BREAKDOWN.
Click to expand...
Click to collapse
so thats why it wasnt working for me today
Xardly said:
so thats why it wasnt working for me today
Click to expand...
Click to collapse
try to used another file hosting but its fail.
tom.android said:
try to used another file hosting but its fail.
Click to expand...
Click to collapse
yeah same, thankfully I could still download the file I made a while back for the sm-t220
Hello First Of All Thank You For Your Work Actually I Got SM T225 From My College So Unlocking Bootloader Is Necessary To Install This ? I Mean There Are Too Many Threads Which Made Me Confused
thetanmaygupta said:
Hello First Of All Thank You For Your Work Actually I Got SM T225 From My College So Unlocking Bootloader Is Necessary To Install This ? I Mean There Are Too Many Threads Which Made Me Confused
Click to expand...
Click to collapse
yes, you would need to unlock the bootloader to install a custom rom
Xardly said:
yes, you would need to unlock the bootloader to install a custom rom
Click to expand...
Click to collapse
I mean it's gsi wait lmao it doesn't have a/b support omg I haven't opened box saw specs lmao by the way any tutorial for unlocking bootloader or going in to download mode using samfw can unlock bootloader
thetanmaygupta said:
I mean it's gsi wait lmao it doesn't have a/b support omg I haven't opened box saw specs lmao by the way any tutorial for unlocking bootloader or going in to download mode using samfw can unlock bootloader
Click to expand...
Click to collapse
the simplest way to unlock the bootloader is going into developer options and enabling OEM unlock. after that shut the tablet off and put it into download mode by connecting it to a PC and holding down both volume buttons. then you will get a blue screen that will tell you to press and hold volume up button to unlock the bootloader and that it will reset your device data. once your device reboots your bootloader is unlocked.
Xardly said:
the simplest way to unlock the bootloader is going into developer options and enabling OEM unlock. after that shut the tablet off and put it into download mode by connecting it to a PC and holding down both volume buttons. then you will get a blue screen that will tell you to press and hold volume up button to unlock the bootloader and that it will reset your device data. once your device reboots your bootloader is unlocked.
Click to expand...
Click to collapse
Ok I Found OEM Unlocking Is Disabled Now Thing's Are Actually Getting Complicated