i Have Lenovo S60-a when i upgrade it to 5.0 then it cause some problem
it load nothing i tried all combinition of button then i tried it through test point and it work it load Qualcomm HS-USB QDLoader 9008 and connected to my pc now when i try to flash it through QFil it give me error
Sahara Version:0
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
And some time it give
Unable to send FireHose NOP, Device is not in Firehose mode !
Download Fail:System.Exception: Failed to send Firehose NOP to the phone.
at QC.QMSLPhone.Phone.QPHONEMS_FireHoseNOP()
at QC.SwDownloadDLL.SwDownload.FireHoseDownloadImage(Boolean bResetPhone, List`1 rawprogramFilesList, List`1 patchFilesList, Single& fImageSizeInMB, Single& fThroughput)
Download Fail:FireHose Fail FireHose Fail
Finish Download
I bricked my Lenovo Vibe K5 while trying to install TWRP.
Now it's stuck at boot and will only enter download mode.
I've tried to flash it with QFIL but I only get Sahara error.
Here is the QFIL log:
Validating Application Configuration
Load APP Configuration
COM:3
SAHARA:True
SAHARA:C:\Users\sondre\Documents\A6020a40_S022_160423_ROW_qpst\SW\SW\prog_emmc_firehose_8929.mbn
SEARCHPATH:C:\Users\sondre\Documents\A6020a40_S022_160423_ROW_qpst\SW\SW
RAWPROGRAM:
rawprogram0.xml
PATCH:
patch0.xml
ACKRAWDATAEVERYNUMPACKETS:False
ACKRAWDATAEVERYNUMPACKETS:100
MAXPAYLOADSIZETOTARGETINBYTES:False
MAXPAYLOADSIZETOTARGETINBYTES:49152
DEVICETYPE:eMMC
PLATFORM:8x26
READBACKMODE:0
RESETAFTERDOWNLOAD:False
MAXDIGESTTABLESIZE:8192
SWITCHTOFIREHOSETIMEOUT:30
RESETTIMEOUT:200
RESETDELAYTIME:2
FLATBUILDPATH:C:\
FLATBUILDFORCEOVERRIDE:True
QCNPATH:C:\Temp\00000000.qcn
QCNAUTOBACKUPRESTORE:False
SPCCODE:000000
Load ARG Configuration
Process Index:0
Validating Download Configuration
Image Search Path: C:\Users\sondre\Documents\A6020a40_S022_160423_ROW_qpst\SW\SW
RAWPROGRAM file path: C:\Users\sondre\Documents\A6020a40_S022_160423_ROW_qpst\SW\SW\rawprogram0.xml
PATCH file path:C:\Users\sondre\Documents\A6020a40_S022_160423_ROW_qpst\SW\SW\patch0.xml
Programmer Path:C:\Users\sondre\Documents\A6020a40_S022_160423_ROW_qpst\SW\SW\prog_emmc_firehose_8929.mbn
Start Download
Program Path:C:\Users\sondre\Documents\A6020a40_S022_160423_ROW_qpst\SW\SW\prog_emmc_firehose_8929.mbn
COM Port number:3
Sahara Connecting ...
Sahara Version:0
Start Sending Programmer
Download Fail:Unable to download Flash Programmer using Sahara Protocol
Download Fail:Sahara FailSahara Fail
Finish Download
Click to expand...
Click to collapse
Start Download
Program Path:E:\WIN\Lenovo_S90-A_S239_151126_ROW\Firmware\prog_emmc_firehose_8916.mbn
COM Port number:5
Sahara Connecting ...
Sahara Version:0
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
Try to reinstall your drivers and do like in the video . https://www.youtube.com/watch?v=J7Hf_eMICTs
Hello,
I own Nubia M2 play (NX907J).I recently kinda bricked it, but I have QFIL files for it. I have installed all the necessary drivers for Qualcomm, changed the port to QDloader 9008. After I press download I have a problem with Sahara. Here it is:
2020-03-22 12:38:35.981 12:38:35: ERROR: function: is_ack_successful:1121 SAHARA_NAK_MEMORY_DEBUG_NOT_SUPPORTED
2020-03-22 12:38:35.982
2020-03-22 12:38:35.983 12:38:35: ERROR: function: sahara_start:895 Exiting abruptly
2020-03-22 12:38:35.984
2020-03-22 12:38:35.985 12:38:35: ERROR: function: sahara_main:924 Sahara protocol error
2020-03-22 12:38:35.986
2020-03-22 12:38:35.986 12:38:35: ERROR: function: main:303 Uploading Image using Sahara protocol failed
2020-03-22 12:38:35.988
2020-03-22 12:38:35.989
2020-03-22 12:38:35.991 Download Fail:Sahara Fail:QSaharaServer Failrocess fail
2020-03-22 12:38:35.992 Finish Download
I have searched all over the internet for solutions but haven't found any. I have also tried switcing to DMSS ,but it didn't help ether. Is it a software problem or a hardware problem? I also added whole log to attachments.
Hi everyone!
Just wanted to share some steps in case you brick your Realme.
DISCLAIMER: I AM NOT RESPONSIBLE FOR ANY DAMAGES
Some prerequisites you will need:
mtkclient + python
spft (sp flash tool)
ofp extractor
Your stock rom in OFP format.
Step 1. Download all of the things mentioned above.
Step 1a. Make sure your device is turned off. DO NOT PLUG IT IN.
Step 2. Install mtkclient using the guide on GitHub.
Step 3. Run
Bash:
$ py mtk payload
in your terminal.
Step 3a. When it says ***waiting for device*** hold both volume buttons and plug in your device.
This will enter BROM mode.
Step 4. Extract and open ofp extractor and extract your ofp.
Step 5. Open SPFT and click DOWNLOAD ONLY (do not I MEAN DO NOT PRESS FORMAT ALL.)
Step 6. In scatter, look for your scatter file. It should be (MTxxxxScatter.txt etc) Then select it.
Step 7. Select your auth file if you have one.
Step 8. Press Download and if the progress bar starts going the flash is going. DO NOT UNPLUG.
Step 9. Reboot after it says 'Download Ok'
Step 10. Enjoy your unbricked device!
NOTE In most cases the rom will be for android 10. Update if required through OZIP.
I cannot download with SPFlash. Error 0xC0060001. I'm sure that I have done all steps correctly including this tutorial:
Realme 7 Unbrick
Of corse I'm doing everything with Realme 7 5G RMX2111EU.
I had problems with disabling protection as follows but I think it finally succeeded.
1. bypass_utility-v.1.4.2 gives error
Code:
[2022-05-10 22:53:51.684562] Waiting for device
[2022-05-10 22:53:59.780976] Found port = COM4
[2022-05-10 22:53:59.921376] Device hw code: 0x996
[2022-05-10 22:53:59.921376] Device hw sub code: 0x8a00
[2022-05-10 22:53:59.921376] Device hw version: 0xca00
[2022-05-10 22:53:59.921376] Device sw version: 0x0
[2022-05-10 22:53:59.921376] Device secure boot: True
[2022-05-10 22:53:59.921376] Device serial link authorization: False
[2022-05-10 22:53:59.921376] Device download agent authorization: True
[2022-05-10 22:53:59.921376] Disabling watchdog timer
[2022-05-10 22:53:59.936976] Disabling protection
[Errno None] b'libusb0-dll:err [control_msg] sending control message failed, win
error: A device attached to the system is not functioning.\r\n\n'
[2022-05-10 22:54:01.028978] Payload did not reply
Press any key to continue . . .
2. mtk-client gives error:
Code:
....Preloader
Preloader - [LIB]: ←[31mStatus: Handshake failed, retrying...←[0m
Preloader
3. MTK Meta Utility v37 success
Code:
Waiting for mtk usb device... ok
BootMode : BootRom[COM4]
DriverName : MediaTek USB Port_V1633
DriverPath : usb\vid_0e8d&pid_0003\5&278a3c80&0&2
DriverID : wdm_usb
DriverVersion : 3.0.1504.0
DriverDate : 1-22-2015
InfPath : oem28.inf
ProviderName : MediaTek Inc.
Connecting to BootROM......
● Chipset MT6853
● Identifier Dimensity 720/800U 5G
● Info 8A00_CA00_0000_Mouton
● MEID:3EFFEA531AB22A57AB0240D8421E92B4
● SecCFG SBC+SDA
Disable BRom protection...
MTK Auth Disable(SLA/DAA) success!
now you can use SP Flash Tool or any MTK Tool
4. MTK Auth Byoass Tool v6.0.0.1 success
Code:
Waiting for mtk usb device... ok
BootMode : BootRom[COM4]
Sync with bootrom started...
● Chipset MT6853:Dimensity 720/800U 5G
● Code Mouton
● Hw Sub 8A00
● HW Ver CA00
● SW Ver 0000
● SecCFG SBC+SDA
Disable brom protection.
Bypass Payload ACK = 0xa1a2a3a4
MTK Secure Boot Bypasss success!
now you can use SP Flash Tool or any MTK Tool
czaroslaw said:
I cannot download with SPFlash. Error 0xC0060001. I'm sure that I have done all steps correctly including this tutorial:
Realme 7 Unbrick
Of corse I'm doing everything with Realme 7 5G RMX2111EU.
I had problems with disabling protection as follows but I think it finally succeeded.
1. bypass_utility-v.1.4.2 gives error
Code:
[2022-05-10 22:53:51.684562] Waiting for device
[2022-05-10 22:53:59.780976] Found port = COM4
[2022-05-10 22:53:59.921376] Device hw code: 0x996
[2022-05-10 22:53:59.921376] Device hw sub code: 0x8a00
[2022-05-10 22:53:59.921376] Device hw version: 0xca00
[2022-05-10 22:53:59.921376] Device sw version: 0x0
[2022-05-10 22:53:59.921376] Device secure boot: True
[2022-05-10 22:53:59.921376] Device serial link authorization: False
[2022-05-10 22:53:59.921376] Device download agent authorization: True
[2022-05-10 22:53:59.921376] Disabling watchdog timer
[2022-05-10 22:53:59.936976] Disabling protection
[Errno None] b'libusb0-dll:err [control_msg] sending control message failed, win
error: A device attached to the system is not functioning.\r\n\n'
[2022-05-10 22:54:01.028978] Payload did not reply
Press any key to continue . . .
2. mtk-client gives error:
Code:
....Preloader
Preloader - [LIB]: ←[31mStatus: Handshake failed, retrying...←[0m
Preloader
3. MTK Meta Utility v37 success
Code:
Waiting for mtk usb device... ok
BootMode : BootRom[COM4]
DriverName : MediaTek USB Port_V1633
DriverPath : usb\vid_0e8d&pid_0003\5&278a3c80&0&2
DriverID : wdm_usb
DriverVersion : 3.0.1504.0
DriverDate : 1-22-2015
InfPath : oem28.inf
ProviderName : MediaTek Inc.
Connecting to BootROM......
● Chipset MT6853
● Identifier Dimensity 720/800U 5G
● Info 8A00_CA00_0000_Mouton
● MEID:3EFFEA531AB22A57AB0240D8421E92B4
● SecCFG SBC+SDA
Disable BRom protection...
MTK Auth Disable(SLA/DAA) success!
now you can use SP Flash Tool or any MTK Tool
4. MTK Auth Byoass Tool v6.0.0.1 success
Code:
Waiting for mtk usb device... ok
BootMode : BootRom[COM4]
Sync with bootrom started...
● Chipset MT6853:Dimensity 720/800U 5G
● Code Mouton
● Hw Sub 8A00
● HW Ver CA00
● SW Ver 0000
● SecCFG SBC+SDA
Disable brom protection.
Bypass Payload ACK = 0xa1a2a3a4
MTK Secure Boot Bypasss success!
now you can use SP Flash Tool or any MYKI Tool
Click to expand...
Click to collapse
What more.info about the error code do you have? Also are you on windows because spft buggy on linux
BROM ERROR : STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001)
Windows 7
SP_Flash_Tool_v5.2208_Win
czaroslaw said:
BROM ERROR : STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001)
Windows 7
SP_Flash_Tool_v5.2208_Win
Click to expand...
Click to collapse
Then you haven't bypassed brom, try mtkclient again and don't unplug your device
Mtk client gives error: Preloader - [LIB]: ←[31mStatus: Handshake failed
Install mtk drivers and Libusb, also pyserial
All above mentioned was installed. I tried different pack from droidwin and I get this:
Code:
Port - Device detected :)
Preloader - CPU: MT6853(Dimensity 720 5G)
Preloader - HW version: 0x0
Preloader - WDT: 0x10007000
Preloader - Uart: 0x11002000
Preloader - Brom payload addr: 0x100a00
Preloader - DA payload addr: 0x201000
Preloader - CQ_DMA addr: 0x10212000
Preloader - Var1: 0xa
Preloader - Disabling Watchdog...
Preloader - HW code: 0x996
Preloader - Target config: 0xe5
Preloader - SBC enabled: True
Preloader - SLA enabled: False
Preloader - DAA enabled: True
Preloader - SWJTAG enabled: True
Preloader - EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: False
Preloader - Root cert required: False
Preloader - Mem read auth: True
Preloader - Mem write auth: True
Preloader - Cmd 0xC8 blocked: True
Preloader - Get Target info
Preloader - BROM mode detected.
Preloader - HW subcode: 0x8a00
Preloader - HW Ver: 0xca00
Preloader - SW Ver: 0x0
Preloader - ME_ID: 3EFFEA531AB22A57AB0240D8421E92B4
Preloader - SOC_ID: DAA82CB9D5E03916132A0BE2A479C0CC0FFD2B10
1E00173F9EA9FCB44C88FC8E
PLTools - Loading payload from mt6853_payload.bin, 0x264 bytes
PLTools - Kamakiri / DA Run
Kamakiri - Trying kamakiri2..
Kamakiri - Done sending payload...
PLTools - Successfully sent payload: D:\Apk\MTK Bypass Tools\mtkclient-main\mtkc
lient\payloads\mt6853_payload.bin
Be sure to use in SPFT, in connection check USB full speed, and in general settings, uncheck the options Check LIB DA Match and Storage Life Cycle Check.
If this doesn't work, try to flash only preloader firstly, and then flash the rest, upload some screenshot if the error persists.
That means it worked
Ok. Bootloader is unlocked but now I have dm-verity corrupted.
I cannot enter recovery mode. Some error flashes on screen and immediately reboot. I cannot even read this. I have found that it might be:
the serial is not matched
fastboot_unlock_verify failed
I cannot enter fastboot mode. It gives:
Orange state
The device is unlocked and cannot be trusted
and then restarts
Normal boot gives:
dm_varity corruption
Your device is corrupted
It won't be trusted and may not work properly
Press power button to continue
Then pressing power button boots into system correctly and the phone is working.
How to get rid of these errors? How to recover access to recovery and fastboot mode? Should I flash some partitions again from stock formware?
Should I install PBRP using mtkclient as in this guide?
Install TWRP Recovery without using Fastboot Mode [MediaTek]
And then should I root it using patched Magisk as follows?
Root MediaTek Devices without using Fastboot Mode [via MTK Client]
There is some info about patched version of Magisk for MTK devices. Should I use it?
do
Code:
fastboot flash --disable-verity --disable-verification vbmeta {your vbmeta.img}
czaroslaw said:
Ok. Bootloader is unlocked but now I have dm-verity corrupted.
I cannot enter recovery mode. Some error flashes on screen and immediately reboot. I cannot even read this. I have found that it might be:
the serial is not matched
fastboot_unlock_verify failed
I cannot enter fastboot mode. It gives:
Orange state
The device is unlocked and cannot be trusted
and then restarts
Normal boot gives:
dm_varity corruption
Your device is corrupted
It won't be trusted and may not work properly
Press power button to continue
Then pressing power button boots into system correctly and the phone is working.
How to get rid of these errors? How to recover access to recovery and fastboot mode? Should I flash some partitions again from stock formware?
Should I install PBRP using mtkclient as in this guide?
Install TWRP Recovery without using Fastboot Mode [MediaTek]
And then should I root it using patched Magisk as follows?
Root MediaTek Devices without using Fastboot Mode [via MTK Client]
There is some info about patched version of Magisk for MTK devices. Should I use it?
Click to expand...
Click to collapse
If it says DM-verity error, reflash with spft and on mtkclient, relock BL by using
Code:
Py mtk da seccfg lock
I cannot enter fastboot mode so I cannot use fastboot flash.
Second advice: I do not want to lock bootloader.
If you are able to boot to stock, do ADB reboot fastboot
Does not work. It gives the same as VolUP+PWR. Orange state message and reboot.
I cannot enter fastboot in any way.
Should I flash something in brom mode? Recovery partition? Something else to get rid of dm_varity?
Reflash firmware then try, idk this hasn't happened to me
Also send the link of the firmware U got
I have RMX2111_11_C.11. Updated via OTA. I cannot find such version firmware file.
The newest I found is:
RMX2111GDPR_11_C.09 EDL mode
czaroslaw said:
I have RMX2111_11_C.11. Updated via OTA. I cannot find such version firmware file.
The newest I found is:
RMX2111GDPR_11_C.09 EDL mode
Click to expand...
Click to collapse
Relock bootloader and try using this to reunlock bl