Just a noob sharing some thoughts, hope it can help some other noobs like me.
A no wipe in my book:
Here is how i do a no wipe.
In recovery, mount and storage and choose format system.
Go back and wipe Cache and Dalvik
Install / flash the rom.
A full wipe in my book:
Into recovery, mount and storage and format system, data and cache.
Go back, wipe/ reset data, cache and dalvik.
Install/flash rom
Format of the internal SD:
Here is what i do:
Make a app backup with TB to my external sd
Make a nandroid to my external sd
Make sure i also have a efs backup on my external sd
I only save mods, roms on my internal sd in my download map and this map i move to my external sd.
Then i reboot to recovery.
Mount and storage and format internal sd.
And to be save and have it nice a clean, also format system, data and cache and because i am not only a flashohalic but also a cleanohalic, i then wipe/reset factory reset, cache and dalvik.
Probably a big overkill, but he, done it several times it works for my and it only cause a few seconds.
Then i reboot, skip the setup/registration, move my download map back to my internal sd (don't like flashing from external sd).
Back in cwm, again a full wipe which includes the formats data, system and cache.
Then flash the rom and setting it up.
This way, you have a nice clean fresh S3, but and this is a big BUT.
Backup, backup backup and don't forget a efs backup to your external sd and pc.
Don't think lightly about those backups, when imei is broken and you don't have a backup, your a done, only thing left is a visit to Samsung.
Good luck when you are going for it.
And i know, Aroma installer is also doing some automatic wiping, but i am just a bit old fashion and like to do some stuff manually.
Bootloader.
As you all know, the new bootloader can be a pain in the ass.
But, i am still not sure that Samsung only released the new bootloader just to discourages us to flash custom stuff.
So, if you like flashing stuff and you are on the new bootloader like me, just remember when you entered recovery and you are done flashing stuff, use Triangle Away from Chainfire,
But, for some, like on my wifes phone, the latest version works without problem, but on my S3, i need to use the older version, 2.37, why, don't have a glue.
Not all S3 are the same, although have the same name and using the same chipsets.
But you can also use the old bootloaders, with does, you just have to run Triangle Away just once, when entering recovery, it will not count.
Your own choose.
About Sudden Death.
A lot of threads are open for this.
My 5 cents:
I have the "sudden Death" chips VTU00M chip with 0xf1 on both our phones.
Mine is running since 27 may 2012 without problems, still fast and smooth.
The other is up and running since 31 Augustus 2012 and also still fast and smooth.
Both have been rooted from day one, the only thing i do, is turning the devices off completely for a few minutes 4 to 5 times a week.
Old habit to clear memory, anyway, gives me time to do a good cleaning of my screen.
Here is the code to check your revision and to see from which day you are running your S3 *#12580*369#
Further more, AndreiLux found i string in the ELLA kernels released by Samsung that looks like that it solves the sudden death issue.
So, if indeed if fixes this issue, then off course the latest kernels releases from Sammy has also the fix and not just the custom kernels.
As far as i know, all the custom kernels has the fixes integrated this string by now, but i myself like the stock kernels, Indie puts in the Omega Roms.
Phil3759 has also made a repack of recovery based on CWM touch 6.0.2.7 to get it all safe.
More to come in the future, because i am learning everyday here on XDA and like to share and help others.
Edit, here is quote from AndreiLux about the new bootloader:
http://forum.xda-developers.com/showpost.php?p=37163086&postcount=1298
Do I need any particular Bootloader? No - There is no evidence to suggest this fixes anything
Apparently that's wrong, download mode on the device uses a microkernel from inside the bootloader instead of the full blown Linux kernel. When flashing something via Odin in download mode you'd be using the bootloader's MMC driver and thus be at risk.
All-day users are still safe via recovery and live kernel, but are not advised to flash things in download mode with an older bootloader. This also explains why they updated the bootloader in LLA. The security checks are a mere update to bring it up with what the 9305 and Note 2 users already have in terms of not able to get rid of the exclamation mark.
Personal note:
Maybe i am seeing this wrong, to much thinking in terms of home computers, but here is some thoughts regarding above.
From cold, turned off device,.
Turning the device on, micro kernel inside the bootloader kicks in to send information how to start the device correctly.
If it works this way and you are on the old bootloader, then every time you start the device with the old bootloader, you are at risk?
Some useful links:
My struggle with TA
Omega roms S3
Chris_84 Faq
Triangle Away
http://www.chainfire.eu/articles/118/Triangle_Away_vs_Samsung/
Old bootloader
Philz recovery
https://www.google.nl/search?q=andr...s=org.mozilla:en-US:official&client=firefox-a
https://play.google.com/store/apps/details?id=com.electricsheep.asi&hl=nl
https://play.google.com/store/apps/...sIm5ldC52aW5hZ3JlLmFuZHJvaWQuZW1tY19jaGVjayJd
Here i will post stuff that comes along the road like question about batterystats at recovery.
We used to have a option to wipe the battery stats at recovery, also there are some tools at Play store that claims to give a better battery life by just wiping those stats.
But after reading this excellent article, it comes clear that wiping those stats are bull.
So i am glad that option isn't available anymore and perhaps in time, the questions about those stats will faint away in oblivion
And another one i like to share.
Fast Dormancy.
Here is a great article about it, made by Erica.
For me, my provider is saying it's not supporting FD, but when use the method to check, it is supported.
So i tested it for a few days on and off and found that when it's off, i do get some better battery life, but it's just minor.
Instead of losing 5% battery at 8 hours standby, i lost 6%.
Also, i didn't see any benefits in speeds, so i turn it off every time after a flash of a new rom using gokhanmoral tool.
Another thing i like to add.
Wifi.
I have seen many posts about wifi problems.
Here what always works for me.
Sometimes just a reboot of the router will help.
Also, i find changing from dynamic (default) to static that my connection is faster connecting to my router (always use the never setting at wifi advanced to save battery).
Here is how to do it the easy way.
First set it up using it with the default dynamic settings, this way all will be filled in for you.
To change it to static.
Long press your connection and choose modify network config and check show advanced options.
Scroll down a bit and tap on IP settings and choose Static.
And that is all, now you have changed it to static and there is no more need for ip adress to negotiation any more.
https://www.google.nl/search?q=wifi...s=org.mozilla:en-US:official&client=firefox-a
Also if still having problems, adding some more permissions can solve it.
I use root explorer for this
ETC > Long press wifi folder and choose permissions (remember to change Mount R/W to Mount R/O) and check all nine boxes.
Hit back and go to Data > Misc and again long press wifi folder and again, check all nine boxes.
Space
I know, i am a control freak and i hate it when i see space just vanish.
So did some search and found a thumbnail map with more then 1gb size.
Looked at some submaps and i only saw some old stuff.
So, selected all the submaps and just deleted it without problems and gain more then a gb free space.
Here is where you can find it using root explorer:
storage > sdcard0 > .thumbnails.
Edit:
As bigmo7 pointed out, the thumbnails will be rebuild, but off course not off stuff that isn't present on the S3 anymore.
So, if you are someone that is just making pictures or making / creating movies and never delete then from your S3, there is no point off deleting the thumbnails.
But if you like me, moving, creating copying and deleting this kind off stuff, then you can gain space.
Battery life
Always a hot item.
First all, the S3 is a mini computer and computers need juice, just remember this.
Here are some stuff i always do after flashing a new rom.
If the rom comes with a aroma installer which let you select stuff to install or not install, look careful to the list.
Stuff you don't use, can just eat resources and i myself, just find it a waste.
Next, after flashing and setting up the new rom, you will be presented with the option to use wifi.
I always go to advanced when making a wifi connection to choose Never when phone is in standby.
For me, but this can be different for you, wifi is a bit off a drainer so do some testing, let it run overnight with Always selected and another night with Never and see the difference.
Next you will be present if you want to restore and let google backup your phone.
I always deselect backup my phone, first reason, i am a control freak and i decide when and what i want to backup.
And second it can give you wakelocks and this will cost you battery life.
Next step i do is going into settings and to sounds, i don't like the clicking sounds and i deselect all the system sounds.
Next, location services and deselect GPS and Location and Google search.
I want GPS active only when i need it, some apps like Facebook will activate GPS when running and i don't like this.
And i don't want Google to know where i am all the time.
Some weather apps needs Location and Google search to determine your location, but i use Weather pro and it don't need it.
Next step is going into accounts and look what you have selected for syncing.
I always deselect Google photos, Internet and Picasa web albums.
Stuff i don't need .
Location settings at accounts is also off.
Next step is using the Fast Dormancy toggle to disable Fast Dormancy, although my provider is supporting it, enabled costs me a little more juice. Although it's minor, but a lot off minors things makes it bigger .
Then starting Playstore and at settings, deselect Notifications.
And finally freeze stuff i don't use with Titanium Backup pro.
http://forum.xda-developers.com/showpost.php?p=31576747&postcount=105
All this, is giving me a great battery life, with screen on time between 4 1/2 to 6 1/2 hours, depends what i am doing.
And with the latest JB roms, 1 to 2% battery los in 7 hours standby.
No need for me to toggle Airplane mode, mobiledata or some other powersaving setting or app.
I am also always running the stock insecure kernel that comes with the rom, for me no need for a custom one.
Reserved
KeesStolk said:
I only save mods, roms on my internal sd in my download map and this map i move to my external sd.
Click to expand...
Click to collapse
Hello, when we flash a rom that already has mods ... do you know a way to save them ? (where to find them)
I mean. For example, my rom has a mod (and theme) on the toggles (pandoriam i9305). How can I save that mod ? Do you know a good tutorial to learn (safe) modding ?
thorcyar said:
Hello, when we flash a rom that already has mods ... do you know a way to save them ? (where to find them)
I mean. For example, my rom has a mod (and theme) on the toggles (pandoriam i9305). How can I save that mod ? Do you know a good tutorial to learn (safe) modding ?
Click to expand...
Click to collapse
I never save mods because most of the time when flashing a new rom, it's based on a new build and not every time mods are compatible, just like some themes by the way.
I just safe the mod files and thems, when i am sure they are compatible, i just flash them again.
Indie's Omega roms has already a lot of mods in it by default by the way, but i don't think he was for a 9305.
Good work Kees! Now I'm learning from you.
Chris_84 said:
Good work Kees! Now I'm learning from you.
Click to expand...
Click to collapse
Thank you for your kind words, but it is l who is learning from you every day .
Sent from my GT-I9300 using Tapatalk 2
and why dint i see this , brilliant my friend .... one of the best posts , well explained and really good stuff all at one place
thanks my friend
vegeta1 said:
and why dint i see this , brilliant my friend .... one of the best posts , well explained and really good stuff all at one place
thanks my friend
Click to expand...
Click to collapse
Thank you very much, but from you, Chris, Indie and the rest of the omega team are the ones I learn all this great stuff every day.
Sent from my GT-I9300 using Tapatalk 2
i always feel like a noob when ever i read here
big big thanks my friend for pointing out all this so nicely
Very nice posts KeesStolk. Maybe you should write a manual for us?
I'm about to post this in Q&A (searching for an answer brought me here )
I just (3 days ago) upgraded my Omega ROM to v40. All seemed fine - I did as normal but in v35, my last Omega there wasn't a Full Wipe option. I chose not to wipe and everything went as per usual with Omega. I reinstalled my extras (6 x 5 icons, Loud phone hack, Increasing ring phone, Note2 Keybd) and was back to normal.
Except, now my apps will not update.
I found out the hard way. I had a problem with Play Store - open it and it would flash briefly then close. Tried all I knew of but nothing worked so, logic said, Omega v40 is different enough I need a wipe and that why they put it in there as a choice this time. (I checked the Omega thread and couldn't see anything relevant but I was in the pub at the time and may not have been as thorough as I should have been)
I had a TB backup and Nandroid on my ExtSD from 2 days back and an EFS so I ran the install again and chose Full Wipe - again everything went well... until I tried to download TB so I could restore all my apps and data. Play Store opened and stayed Open (yaaaay!) and TB acts like it is downloading but nothing comes through - it just sits until it times out on an error.
I tried several apps and none would DL but then AuWeather DL'd just fine. I went back to TB - no go.
After much frustration I Restored my Nandroid and got back to where I was (Omega v35) but still I can't DL and update for TB. At least Play Store stays open though. I tried running the v40 update again, installing the Default, just in case, (& I have just finished DL'ing v41) but the DL/Update problem persists.
I'm now on:
AP – I9300XXEMA2
CP – I9300BUELK1
CSC – I9300LBEMA1
RF cal – 2012.6.28
HW Rev – MP 1.100
Any ideas? If I can't DL TB once I have flashed, I can't get my data back so a wipe isn't really an option until I fix the DL issues.
As I said, this will also be in Q&A but you seem to have a good grasp on the basics so I thought maybe...? :fingers-crossed:
So... I tried restoring back to v35 and got the same problem. And yet that version has been running since v35 came out, at least a couple of months. So I did it again but this time used the Android Revolution Wipe zip, then a straight install of v35. I could then load TB from Play Store and restore my apps and data. Phone seems back to normal now although I have lost some logs data from the couple of days between my backup and now - no biggie... I also now can update my apps.
So it seems it is something to do with Omega v40.
I've just DL'd v41 so will give that a try. Any help with what might have gone wrong would be much appreciated.
Thank you for your kind words, just sharing what i know and hoping this info can help others.
And how is it with v41?
Did you tried it with wifi and 3g, any difference?
Also tried removing your google account, reboot and setting it up again?
Hi kees !
Nice idea you've got with this thread but ... I hope it won't turn into another omega q&a thread . I would like to direct people here but it will be quite difficult if they will see Omega issues all over. Please point them out to the correct thread as you already posted the link to it. Just a thought , correct me if I'm wrong
Thanx !
Sent from my GT-I9300 using Tapatalk 2
xanthrax said:
Hi kees !
Nice idea you've got with this thread but ... I hope it won't turn into another omega q&a thread . I would like to direct people here but it will be quite difficult if they will see Omega issues all over. Please point them out to the correct thread as you already posted the link to it. Just a thought , correct me if I'm wrong
Thanx !
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Thanks and you are right, but the main purpose for me, is just help others with the noobish knowledge i have and let people and myself learn and share.
I don't mind which rom people are running, that's everyone his or here's choice and i totally respect that.
I think this thread deserves to be in General, since you're not asking anything. Hit "report" and see what a mod thinks about it
KeesStolk said:
Thanks and you are right, but the main purpose for me, is just help others with the noobish knowledge i have and let people and myself learn and share.
I don't mind which rom people are running, that's everyone his or here's choice and i totally respect that.
Click to expand...
Click to collapse
absolutely !!!
everyone`s choice ! but people must follow proper threads , i`ve got nothing against a certain rom but against disarray when users post or open endless threads about same thing .
some users hates me for this , i know it well , in my thread i always pointed out but somehow is unfair to maintain same topic on more threads .
that`s a bad habit for new users and not only for the rule`s sake but this is the way should be in a human community .
-=-=-
i was thinking as well to open a thread as yours but due to lack of time i didn`t. as soon as i`ll find interesting things i`ll let you know .
i myself am a NOOB !
---------- Post added at 11:28 AM ---------- Previous post was at 11:24 AM ----------
Glebun said:
I think this thread deserves to be in General, since you're not asking anything. Hit "report" and see what a mod thinks about it
Click to expand...
Click to collapse
... and i must agree with you this time ...
Thanks guys.
@xanthrax, i know the feeling, kind off busy family
But i like your comments, just straight forward, the way i like it.
Glebun said:
I think this thread deserves to be in General, since you're not asking anything. Hit "report" and see what a mod thinks about it
Click to expand...
Click to collapse
I think it should stay here as it "Helps" other users. General is more for discussions IMO.
But how about these?
http://forum.xda-developers.com/showthread.php?t=1749214
http://forum.xda-developers.com/showthread.php?t=1827635
http://forum.xda-developers.com/showthread.php?t=1732722
http://forum.xda-developers.com/showthread.php?t=1895737
http://forum.xda-developers.com/showthread.php?t=1946481
http://forum.xda-developers.com/showthread.php?t=2041679
and that's just the first page. all of the above are for "help"
I've recently installed AOKP(Jellybean 4.2.2) Task650 (http://forum.xda-developers.com/showthread.php?t=1808015) and the basic install seemed to go very well. I came from stock 4.0.4 (rooted) and for the record I'm using Recovery 6.0.3.0 and I did a full wipe including format system, data, cache, dalvik etc. I installed the new gapps after the ROM, and later restored apps using Titanium.
I have a few issues I can't quite sort out though, and I'm not sure if they are JB, Nova or AOKP related so I thought I'd start a new thread.
1) Lockscreen doesn't appear. At all. When I wake the tablet up, it just comes straight back on to the previously used screen. I've checked all the standard Security settings (unlock mode set to slide or pattern, lock on power button, etc) and also the fancier AOKP ones, but whatever I do the lockscreen just does not appear. I've re-cleared cache and dalvik.
2) Notifications are not showing in the Notifications area. I can see the AOKP 'Toggles' icons/tiles for wi-fi, bluetooth, GPS, etc; the clock; the battery level; the wi-fi SSID, etc - but no general Notifications at all (e.g. list of any updated apps, any download statuses, Poweramp mini controls, new emails/facebook messages, Samba active display, etc).
When these various notification are issued, I do see them appear briefly in the lower-right corner in a grey rectangular box which covers the clock/battery area of the status bar (so the notifications do appear to be triggering) but as soon as that brief message disappears, I can't see any of the notifications within the pop-up notifications area where they should be.
Does anyone familiar with JB, AOKP or this particular ROM have any suggestions, as I'm as a loss at the moment?
Andre
Ah, no-one with any ideas of where these issues might be coming from then?
I might have to try another full-wipe install, and if that fails just go back to stock 4.0.4 until (if ever) Samsung releases a JB update for the original 10.1 tab.
Andre
andrewilley said:
Ah, no-one with any ideas of where these issues might be coming from then?
I might have to try another full-wipe install, and if that fails just go back to stock 4.0.4 until (if ever) Samsung releases a JB update for the original 10.1 tab.
Andre
Click to expand...
Click to collapse
I'm not familiar with that rom, but there are a few things you can try.
1. Try posting in the development thread, it might be a known issue that has a quick fix.
2. If you really want to stick with that rom try the full wipe again. But since you already started with one I don't know if it will fix the problems.
3. If you want to stay with jb I would recommend Aopk build 6 by djmatt604. It runs smoothly and the dev is pretty active.
Hope this helps even a little.
kilometers4 said:
I'm not familiar with that rom, but there are a few things you can try.
1. Try posting in the development thread, it might be a known issue that has a quick fix.
2. If you really want to stick with that rom try the full wipe again. But since you already started with one I don't know if it will fix the problems.
3. If you want to stay with jb I would recommend Aopk build 6 by djmatt604. It runs smoothly and the dev is pretty active.
Click to expand...
Click to collapse
Many thanks for the reply. I have searched and asked in the dev's thread, but I get the very clear impression that if it works on his hardware and no one else has the same problem, his opinion is that it's 100% up to me to sort it out - which is entirely his prerogative, of course: his ROM, his thread, his rules.
Thanks for the recommendation of another AOPK option (I assume you mean [ROM][P7510][4.2.2][UNOFFICIAL] AOKP Build 6 :: MR1 :: Mar 29 Nightly). I think I might go down that route since, like you, I'm rather dubious that another full-wipe will be any different to the first one.
Andre
andrewilley said:
...
Thanks for the recommendation of another AOPK option (I assume you mean [ROM][P7510][4.2.2][UNOFFICIAL] AOKP Build 6 :: MR1 :: Mar 29 Nightly). I think I might go down that route since, like you, I'm rather dubious that another full-wipe will be any different to the first one.
Andre
Click to expand...
Click to collapse
Yup that's the one. I'd recommend doing a full wipe on the first install to avoid issues. Let me know if you have any other questions.
I went with [ROM][KERNEL][RECOVERY][JB4.2]Infamous AOKP 1.4 (14-Apr-13) in the end, from the same dev you suggested. I added Nova as my launcher and it all works like a charm (well, after I recovered myself from a stupid near-brick when I decided to format the user sdcard in order to clear out any remaining junk from old installs; it cleared out a lot more than I wanted!!!)
Andre
andrewilley said:
I went with [ROM][KERNEL][RECOVERY][JB4.2]Infamous AOKP 1.4 (14-Apr-13) in the end, from the same dev you suggested. I added Nova as my launcher and it all works like a charm (well, after I recovered myself from a stupid near-brick when I decided to format the user sdcard in order to clear out any remaining junk from old installs; it cleared out a lot more than I wanted!!!)
Andre
Click to expand...
Click to collapse
Yeah, I usually just wipe data / Factory reset when doing a full wipe and then go in manually and clean out folders that I don't need to clear space. SD maid is a good app for clearing unused space too.
kilometers4 said:
Yeah, I usually just wipe data / Factory reset when doing a full wipe and then go in manually and clean out folders that I don't need to clear space. SD maid is a good app for clearing unused space too.
Click to expand...
Click to collapse
Yeah, I'm normally the same but I thought I'd be nice and thorough for once and get rid of any remaining legacy ICS stuff which some JB updates shove into hidden folders when you upgrade. In hindsight, I shouldn't have bothered.
Still, at least when I finally did get the system recovered enough to install the new ROM, the free space was amazing!
Andre
I got the same problem...how to solve it bro....
srinuchry said:
I got the same problem...how to solve it bro....
Click to expand...
Click to collapse
I think the problem may have been with something that Titanium Backup restored from my previous setup, but I never found out what. I had to do a factory reset to clear it in the end (although not a full ROM reinstall).
As I'd already gone that far though, rather than risking re-installing apps again I actually chose another ROM anyway - Infamous (see above) - which I'm very happy with, and the devs there seem much happier to talk to you in general. Just my observation anyway, your experiences could well be quite different of course.
Andre
Hi, a few days ago my phone camera fault, I get a notice saying "error connecting to camera", so I did a logcat to see what happened but I honestly don't know how to read it and thus can not understand where is the reason for the problem so that's why I put this here so that any experienced user help me and tell me what is the problem... Here is the log http://pastebin.com/print.php?i=rXU9DwAc
Thanks for your time guys!
PS: the front camera and flashlight also don't work, I try flashing another rom but didn't work (CyanogenMod 10.1)
Well at face value, e.g. taking the error literally.. a bug caused a java error keeping the camera app from loading properly. Specifically an empty string value that throws an exception.
Now you have to place that in a context. If it was a one time error.. don't worry about it. If it is repeatable, it could be a bug, conflict, corrupted install, et cetera. A logcat is just a detailed log of what the OS and drivers were doing to provide clues for troubleshooting. Do a search for the CM build you have and see if anyone else is having issues. If so, that suggests a bug. Otherwise you can try disabling other apps that may be conflicting.
You implied that this is a recent problem.. so corruption or a conflict seem more likely. Did this happen after a recent flash or installing a new app? If you flashed a new CM build, did you wipe the cache? If not, I'd suggest that you If not, consider reflashing your ROM, ensuring that you wipe the cache data to see if that resolves the issue. It seems odd if you had a stable configuration and reflashing doesn't resolve the issue.. at least temporarily. Look for a pattern or missed step, like not wiping the cache.
HTH
fffft said:
Well at face value, e.g. taking the error literally.. a bug caused a java error keeping the camera app from loading properly. Specifically an empty string value that throws an exception.
Now you have to place that in a context. If it was a one time error.. don't worry about it. If it is repeatable, it could be a bug, conflict, corrupted install, et cetera. A logcat is just a detailed log of what the OS and drivers were doing to provide clues for troubleshooting. Do a search for the CM build you have and see if anyone else is having issues. If so, that suggests a bug. Otherwise you can try disabling other apps that may be conflicting.
You implied that this is a recent problem.. so corruption or a conflict seem more likely. Did this happen after a recent flash or installing a new app? If you flashed a new CM build, did you wipe the cache? If not, I'd suggest that you If not, consider reflashing your ROM, ensuring that you wipe the cache data to see if that resolves the issue. It seems odd if you had a stable configuration and reflashing doesn't resolve the issue.. at least temporarily. Look for a pattern or missed step, like not wiping the cache.
HTH
Click to expand...
Click to collapse
Well none of those, I was on a stock rom (I flash a few tweaks for improve the net speed and things like that) and suddenly the camera error starts so I flash a cm rom for try to solve the problem but seems to not work ( I make all the wipes correctly)
martin_carpio17 said:
Well none of those, I was on a stock rom (I flash a few tweaks for improve the net speed and things like that) and suddenly the camera error starts so I flash a cm rom for try to solve the problem but seems to not work ( I make all the wipes correctly)
Click to expand...
Click to collapse
The essence of troubleshooting is looking for patterns.. which point us towards the ultimate cause of a problem. If I had a java error, the first thing I would try is simply rebooting the phone. If it continued, I would suspect a conflict (if I had recently installed an app or changed some settings). So.. try reversing those tweaks and see if that clears that error. Less common would be corruption.. and you might test that by flashing back to the same stock ROM if it was working fine before you saw the issue.
Flashing to a different CM ROM wouldn't be a first step. It might work. But you don't gain much knowledge if it doesn't as a new ROM introduces a host of new variables as well. If the cause of the issue is unclear, you want to confront the most obvious suspects first and try to change only one variable at a time. In your place, i'd go back to the stock ROM.. confirm that the camera works properly again. Then restore your tweaks one by one watching to see when the problem recurs.
Good luck
.
Would post this question in the relevant development thread but I don't have enough posts yet.
I'm using the Infamous PAC rom compiled by kasper_h in this thread.
My problem is with the Paranoid Android "hybrid settings" included with the rom. In the UI settings I can set the interface mode to be exactly how I like (tablet UI, 140 dpi, etc.). After changing a setting and pressing Save, the system UI will restart immediately and correctly display the updates I've made. However, after a restart of the tablet it reverts back to 360p phone UI mode. As far as I can tell my color changes have held (statusbar and navbar are transparent as I wanted).
Has anybody run into a similar issue with a Paranoid ROM or have some tips to get these settings to persist after reboot? Thanks.
Edit: It is worth mentioning that I've installed Apex launcher in place of the default Trebuchet, but I've tried booting with and without the "use tablet UI" checked, and neither prevents the system UI from reverting.
JeSuisNerd said:
Would post this question in the relevant development thread but I don't have enough posts yet.
I'm using the Infamous PAC rom compiled by kasper_h in this thread.
My problem is with the Paranoid Android "hybrid settings" included with the rom. In the UI settings I can set the interface mode to be exactly how I like (tablet UI, 140 dpi, etc.). After changing a setting and pressing Save, the system UI will restart immediately and correctly display the updates I've made. However, after a restart of the tablet it reverts back to 360p phone UI mode. As far as I can tell my color changes have held (statusbar and navbar are transparent as I wanted).
Has anybody run into a similar issue with a Paranoid ROM or have some tips to get these settings to persist after reboot? Thanks.
Edit: It is worth mentioning that I've installed Apex launcher in place of the default Trebuchet, but I've tried booting with and without the "use tablet UI" checked, and neither prevents the system UI from reverting.
Click to expand...
Click to collapse
Thats a stable rom… but. I had problems with it also. Some devices just dont like certain roms.
You might try a clean flash… .wipe data, cache, dalvik. And format system. Yes this can make a difference.
Short of that… you could try a different kernel. And see if that helps. I always thought that was the issue on my device… as his kernels always cause me some kind of issue i have to fix. But ive yet to have the problem your having.
Gil81 said:
Thats a stable rom… but. I had problems with it also. Some devices just dont like certain roms.
You might try a clean flash… .wipe data, cache, dalvik. And format system. Yes this can make a difference.
Short of that… you could try a different kernel. And see if that helps. I always thought that was the issue on my device… as his kernels always cause me some kind of issue i have to fix. But ive yet to have the problem your having.
Click to expand...
Click to collapse
Hmm, that seems to have done it. I hadn't run across isntructions that suggested formatting /system, but after a clean install plus that my issue seems to be resolved, as well as some annoying homescreen jumping around. Thanks!
I don't know if others are facing the similar problem but it has turned my life into hell after the new update. I will list down the issues on ALL ROMS after the new OOS 3 update with bootloader in my device.
I had issue in accessing storage, which means gallery, file explorer or literally any app crashes when I try to access from the storage, be it internal or external sd card.
Couldn't use the latest snapchat at all, can't post in story, can't save any snap, can't upload from camera roll. It was just a dead end. However I could only post into story with a older Snapchat version, still due to storage access issue, I couldn't save or upload from Camera Roll
Facebook picture upload would ocassionally crash the app.
Couldn't take more than 1 picture in latest youcam app, storage issue would crash the app.
Gallery apps fail to generate thumbnail previews.
All these above problems caused permanent storage access unavailability until I rebooted device.
Need to charge my device twice as Battery runs faster than Usain Bolt.
So finally after a lot of tingling, I finally downgraded my device to OOS 2.1.3 with TWRP 2.8.7. Trust me it's very stable, bug free and battery friendly. Though I miss the new security patches features and snappy feel from Android 6 & 7.
The above problems are not happening in 2.1.3. I can use latest snapchat, youcam & facebook without any issue at all. Is there any way to prevent these issues on new Android OS in my device ? I believe it's not a device issue as 2.1.3 is running very stable and bug less.
Never had any of those issues on OOS 3 update. Think you might of gone wrong somewhere maybe.
Exodusche said:
Never had any of those issues on OOS 3 update. Think you might of gone wrong somewhere maybe.
Click to expand...
Click to collapse
I am really eager to find that out. I have almost tried every ROM on the new bootloader. Except MOOS 2.0 or something, each and every ROM had this bug, even official OOS 3.1.4. Any idea what might went wrong ? The bugs are not reproducing in OOS 2.1.3 though. Which makes me believe that my device is ok.
arafat_mw said:
I am really eager to find that out. I have almost tried every ROM on the new bootloader. Except MOOS 2.0 or something, each and every ROM had this bug, even official OOS 3.1.4. Any idea what might went wrong ? The bugs are not reproducing in OOS 2.1.3 though. Which makes me believe that my device is ok.
Click to expand...
Click to collapse
Think I figured it out for you. You are on really old OOS2 build you need to flash 2.2.3 before you update to OOS3. It was made for the update to MM.
Are you sure you gave the good permission. On MM, when you first launch an app, it should ask you for it. Maybe a bug appear at one point.
You should go to menu settings / app / 3 dots menu at the top right an reset app prefs.
Then re open app one by one.
You can try first without your SD inside to see if it happens again.