[MOD] Flashable Custom Bootup charging & Splash screens for A5 (A510F) - Galaxy A3, A5, A7, A8, A9 Themes and Apps

Custom Bootup Charging & Splashscreens for Samsung A5 2016
Credits for the original mod go to moluntic for creating this mod for Samsung J7 and nhlalukoG for pointing me in the correct direction
- This mod will change the first image you see when turning ON the phone.
- If you want to have your Charging startup screen changed the same way, check POST 3
- If you want your device to look like s6 or s7, check post 10
- Please be warned this mod is created for A510F and only tested on this device! It will probably not work on other Samsung A models and might soft brick your device if you try anyway !
- This will not go away if you do a facory reset or delete data etc., you will need to flash the stock splashscreen to go back to stock
How to install ?
- Flash desired zipfile in TWRP recovery
- Reboot
- done
Previews :
anon1 & anon2 & anon3
colorwater & colorstrips & colorearth
Android1 Android2 Android3
Stock image for restoring to Official
Check next reply and post 10 for more

More :
Msport
DeborahDL
AllinOne

Modded Startup Charging screens
Now also comes with battery charge changed
(This changes the screen that first shows up when your device is OFF and you connect a charger)
I also added a 'restore to stock' flashable zipfile (only for A510F !!)
* f you want startup screen to be different you should first flash battery charging mod first ( it changes both battery & startup screen) and one with startup screen only after that.
Previews :
android 1,2 & 3 startup charging screen
Anon1 2 & 3 startup charging screen
colorwater & stripes & earth startup charging screen
Msports startup charging screen
DeborahDL

Good Work, can u make Anon1 for Galaxy A3 (2015 version) ?

[GS] said:
Good Work, can u make Anon1 for Galaxy A3 (2015 version) ?
Click to expand...
Click to collapse
Hi, i don't know, i don't have the device so i cannot test but i think your PARAM file (that has the logo.jpg in it, must be somewhere in \dev\block\..) will be different & at another place for your device. so this script in zip file would need a change to the correct place to work.
I will have a look but i can not promise that i can find it

contrinsan said:
Hi, i don't know, i don't have the device so i cannot test but i think your PARAM file (that has the logo.jpg in it, must be somewhere in \dev\block\..) will be different & at another place for your device. so this script in zip file would need a change to the correct place to work.
I will have a look but i can not promise that i can find it
Click to expand...
Click to collapse
I think its the same with A5. look attachment photo.

[GS] said:
I think its the same with A5. look attachment photo.
Click to expand...
Click to collapse
Hi, when you copy that param file to your pc and install 7zip, you can UNTAR that file to a directory and it will have logo.jpg in it, (you can also untar it directly on your device with linux commands in Terminal from google playstore but i am not familiar with these commands)
If you upload that file in here i can edit it and add it to the flashable zip file but i can not promise it will work, (i've tested other mods like this and they didn't work for my phone but i was lucky to find out samsung J7 has the same chipset and param file so this worked with minimal modding on A5 2016 version)
remember if it doesn't work, you will probably only have option for download mode and will need to flash a firmware with odin that has original param with bootup screens to get your device back to work so make a full backup in twrp just in case so you can restore that after flashing original firmware when something goes wrong.

[GS] said:
I think its the same with A5. look attachment photo.
Click to expand...
Click to collapse
I'm sorry i need to edit my first reply
PARAM is indeed also in dev\block\ ( ididn't notice till now)
that one can be used for getting the logo.jpg but not for flashing to the device.
So i will need a little more info.
There should also be (in the case of J7 & A5 2016) :
/dev/block/platform/13540000.dwmmc0/by-name/PARAM
-> 13540000.dwmmc0 will be different for you, please search where your other PARAM is in your device write the exact names of folder like i just did so i can (try to) change the script for installing the flashable zip to the location for your device.
if you are abl to extract the logo.jpg from the param you can offcourse also edit as you want and add it over here. (you can change completely the looks but it must stay same dimensions (for example 1080*1920) and stay below 400kb and must stay same as logo.jpg (as mentioned in the original J7 topic)

Please make S6 or S7 splashscreen

Frankestein™ said:
Please make S6 or S7 splashscreen
Click to expand...
Click to collapse
Hi, i hope this is what you mean ?
20/10/2016
Credits to Frankestein for delivery of S7 black & white logo

So good thanks.

contrinsan said:
Hi, i hope this is what you mean ?
I only have original from s7 edge, so s6 & s7 is selfmade, hope you like it.
Click to expand...
Click to collapse
I think you will be edit s6 or s7 splashscreen because they are not same.

Frankestein™ said:
I think you will be edit s6 or s7 splashscreen because they are not same.
Click to expand...
Click to collapse
If you can provide them because Google doesn' t have it

contrinsan said:
If you can provide them because Google doesn' t have it
Click to expand...
Click to collapse
I think you will do it

Frankestein™ said:
I think you will do it
Click to expand...
Click to collapse
Thanks, i updated the zipfile in post 10 with the correct image, i meanwhile was able to extract the original S6 logo from S6 firmware also

Where is it DeborahDL ?

Dreamer62 said:
Where is it DeborahDL ?
Click to expand...
Click to collapse
Oops, looks like i forgot to upload the battery charging deborah de luca. Thanks for pointing that to me. I will add it when i get home from work

Logo's S6 & S7 with inverted colors
Dowloads check post 10

i test in a3 2016
hi man.
i flash this in my a3 2016. but this not work in my phone.
i want stock splashscreen for my a3 2016.
can u help me?

Mehranzolghadr666 said:
hi man.
i flash this in my a3 2016. but this not work in my phone.
i want stock splashscreen for my a3 2016.
can u help me?
Click to expand...
Click to collapse
If don't get the original splash, only install the same boot.img with Odin

Related

[Q] How To Change The Boot Logo?

Right now when the phone boots up, the first screen has the b/w image that says : Samsung GT I5800. This is followed by the custom boot animation that I've set. Now how do I change this boot logo?
djsvish said:
Right now when the phone boots up, the first screen has the b/w image that says : Samsung GT I5800. This is followed by the custom boot animation that I've set. Now how do I change this boot logo?
Click to expand...
Click to collapse
The boot logo is a part of the bootloader...
Dont even try changing it..You will hardbrick your phone...
But I saw this post on Samdroid forums, a how-to for creating custom bootlogos for Samsung Spica
[Link : forum.samdroid. net/ f55/tutorial-how-create-custom-bootlogo-bootanimation-863/ ]
There should be a way to do the same in Galaxy 3, right?
djsvish said:
But I saw this post on Samdroid forums, a how-to for creating custom bootlogos for Samsung Spica
[Link : forum.samdroid. net/ f55/tutorial-how-create-custom-bootlogo-bootanimation-863/ ]
There should be a way to do the same in Galaxy 3, right?
Click to expand...
Click to collapse
Looks like it should work...but who is willing to take the risk of bricking the phone??
Edit - I am not completely sure about bricking, maybe some more experienced developer can help you out..
Humpff... Kyrillos keeps attaching this "logos.png" file to all his releases. Unfortunately, they never show up. I wish someone could help me out here.
BUMP!
Sent from my GT-I5800 running on Kyrillos 5.6 ROM | Bleeding Edge Fugumod 2.2 | Overclocked 1.3GHz | 8GB SD
To flash a custom logo you have to include bootloader in the package. Before flashing anything CHECK THE LOGO SIZE and properties. Then you could flash the bootloader.
djsvish said:
But I saw this post on Samdroid forums, a how-to for creating custom bootlogos for Samsung Spica
[Link : forum.samdroid. net/ f55/tutorial-how-create-custom-bootlogo-bootanimation-863/ ]
There should be a way to do the same in Galaxy 3, right?
Click to expand...
Click to collapse
AFAIK this method wont work straightway on g3
The image is included in the bootloader and improper modding could lead to serious damaga(hard brick-can be saved only by warranty)
so better be satisfied with what it is and use/make a custom bootanimation instead with a custom boot sound to enjoy it more
djsvish said:
Humpff... Kyrillos keeps attaching this "logos.png" file to all his releases. Unfortunately, they never show up. I wish someone could help me out here.
Click to expand...
Click to collapse
logo.png is present in all stock roms
some roms makers remove some keep
EDIT: if someone properly mods the logo,png(size as of original/like in that tutorial) and if we use a modded bootloader then maybe we can use custom splash screens
@Senoir Devs:tell what you think about this
word
sorry guys i move this to the right thread.. my apologies.

Lens Flare Lockscreen Effect is Back with 18 styles installed with Aroma 11/1/14

I just wrote this this morning and finished testing in my phone. All is working fantastic!
This mod is to bring back the Lens Flare Effect.
Here are just a few previews and the rest are viewed from the installer in the update coming soon.
AURORA
FIRESTORM
LIGHTNING
METEOR
STARGATE
SOLAR SYSTEM
I have included 11 different choices all installed via Aroma Installer from custom recovery of your choice (I used TWRP). This mod does require that your rom has "init.d" support as this does need a script called at every boot to work. AGAIN CALLS SCRIPT UPON EVERY REBOOT. The script depending on each phone should take longer than 30-45 seconds. Basically flash the mod reboot and the next time you turn on the phone the effect will be active.
DOWNLOAD FLARE_LOCKSCREENv1.1a
DOWNLOAD FLARE_LOCKSCREEN_v1
Instructions for installation -
*Make a NANDROID ALWAYS AND OFTEN when modding your system!
*ROM that supports init.d script
*download and check md5 is good
*reboot to recovery and flash the zip file
*pick the effect you want (sorry I don't have the previews for the installer set up yet)
*reboot and let the script work it's magic and by time you turn your phone back on a surprise will be waving at you.
*hit the thanks button
Changelog:
v1.1a
*added the files I forgot to put in to make this work for more people (sorry for anyone who tried the last version and failed)
v1.1
*now has preview option while in recovery
*attempt to make more compatible with variety of ROMs by adding sqlite3 to xbin. (hope this helps) needs testing, mine were successful
*now has 18 options
v1
*Initial release includes 11 choices
Any feedback? Just really want to know if this is working for people? Its hard for me to tell sometimes because I am always testing various mods! I get back as close to stock as I could remember, so I could get this to be compatible with all S5 variants. So please let me know. Remember unless your rom has init.d compatibility, this won't work!
screenshot please !!!!!
Screen shots or a video will be very helpful.
naudmick said:
screenshot please !!!!!
Click to expand...
Click to collapse
Posted previews in the first post
Masum56k said:
Screen shots or a video will be very helpful.
Click to expand...
Click to collapse
The update will include previews viewed from inside the installer
Did not work for me I'm on exsexstrolite Rom other Amora installers themes and options work this did not for me
kungzila said:
Did not work for me I'm on exsexstrolite Rom other Amora installers themes and options work this did not for me
Click to expand...
Click to collapse
Thank you for the input. I am finding that only 75% of the various roms options available are reading and executing the script properly. Some are failing because of no sqlite3 in xbin. I'm looking further into the this.
It can be manually set using a sqlite editor and changing the value for "lockscreen ripple effect=2" in the data/data/com.android.providers.settings/databases/settings.db
@stangdriver44 can you make it Mobile Odin Pro OTA/update flashable??? That way it wont trip knox and wont require custom recovery
wajiman said:
@stangdriver44 can you make it Mobile Odin Pro OTA/update flashable??? That way it wont trip knox and wont require custom recovery
Click to expand...
Click to collapse
it's not possible with the use of Aroma Installer due the fact of the User Interface during installation in recovery. If you know which option you want I can take a look at getting something for you. You will have to decide which Style as you will be updating the system with only one option.
stangdriver44 said:
it's not possible with the use of Aroma Installer due the fact of the User Interface during installation in recovery. If you know which option you want I can take a look at getting something for you. You will have to decide which Style as you will be updating the system with only one option.
Click to expand...
Click to collapse
Alendr's custom room uses aroma installer and it installs fine using mobile odin pro. Nvm I'll look and let you know which style. It's hard to choose atm
DHL from Heavenly made S5
wajiman said:
Alendr's custom room uses aroma installer and it installs fine using mobile odin pro. Nvm I'll look and let you know which style. It's hard to choose atm
DHL from Heavenly made S5
Click to expand...
Click to collapse
I wasn't aware of that. Do you have a link? I would like to check that out. Have you tried flashing this with mobile odin pro? I can't say that I've ever tried so I wouldn't know. I will probably just do that now. I'll let you know. Thanks
stangdriver44 said:
I wasn't aware of that. Do you have a link? I would like to check that out. Have you tried flashing this with mobile odin pro? I can't say that I've ever tried so I wouldn't know. I will probably just do that now. I'll let you know. Thanks
Click to expand...
Click to collapse
here is the link:
http://forum.xda-developers.com/galaxy-s5/development/rom-ane4-kitkat-4-4-2-multi-csc-t2813628
its under installation> point no.2
and yes i have flashed his custom rom without tripping knox
Is it possible to flash this on note 3 running ported stock rom s5
¥Sagittarius¥
Urban pendu said:
Is it possible to flash this on note 3 running ported stock rom s5
¥Sagittarius¥
Click to expand...
Click to collapse
I'm not sure since I don't own that device. This was a post mentioning note 3
http://forum.xda-developers.com/showpost.php?p=56193488&postcount=7
has this been fix for other Rom yet ? I've tried the sqlite3 option nothing still
kungzila said:
has this been fix for other Rom yet ? I've tried the sqlite3 option nothing still
Click to expand...
Click to collapse
So you tried changing the settings.db file and still no effect?
stangdriver44 said:
So you tried changing the settings.db file and still no effect?
Click to expand...
Click to collapse
Yep..it just removed the lock effect..
kungzila said:
Yep..it just removed the lock effect..
Click to expand...
Click to collapse
Check the OP. Posted an update with an attempt to make this work for more people. Let me know. FYI the size has grown so a lot because it now has preview option in recovery.
Let me know if it works for you. My tests on different ROMs were successful
hello
hello mate can you tell me what font you are using on lockscreen screenshots???
thanks
I've got a verizon retail s5 and was wondering if you had any flashables zips of them separately. It just freezes in safestrap when attempting it says starting aroma

[ROM][STOCK][4.4.2][SM-T231]Smoothz Rom T231

Hey guys today i decide to post rom that i make to make the tablet sm-t231 smoother this rom is inspired by yash92duster,secretwolf98 and AL_IRAQI's ROM i remove some stock samsung app but u can install from playstore or request
to me the stock apps
- ROM FEATURES -
- Rom size 400mb
- Stock based rom T231XXU0AQL1 (Latest 2018)
- Stock kernel
- Rooted
- Deodexed
- Zipaligned
- Remove Most Samsung Apps
- Remove Most Google Apps
- Remove other bloatware
- Tab S Launcher
- Navigation bar
- Init.d support
- Fixed sdcard permission
- REQUIREMENT -
- Samsung Galaxy Tab 4 SM-T231
- Latest TWRP Recovery
- HOW TO DOWNLOAD THE ROM -
- Simply click on the link below and then on google drive click the download button on
top right
- HOW TO INSTALL THE ROM -
DISCLAIMER - Make sure u backup all of ur files and rom before flashing this rom in case something goes wrong also this rom only works for Samsung Galaxy Tab 4 SM-T231 dont attempt to flash this rom on other device and im not responsible if ur device is broken
1 - Boot to the TWRP recovery
2 - Wipe Dalvik/ART Cache, System, Data, Cache & Preload
3 - Flash the rom zip
4 - Reboot the device
5 - Done
- CREDITS -
+ ASSAYYED KITCHEN
+ yash92duster
+ AL_IRAQI
+ secretwolf98
+ Chainfire
+ sukhman12
+ All xda member for giving me ideas.
- ROM LINK -
Android File Host
https://www.androidfilehost.com/?w=files&flid=270435
Google Drive
https://drive.google.com/file/d/1A62D2PpJqyeWEdw7xwXjAV740NI6uSVU/view?usp=sharing
- KEYBOARD APK - keyboard is removed so install this keyboard apk.. u can either install this as system app or install this as normal app
https://drive.google.com/file/d/1mhOs6XY3dWu1lmprj3su32PgewHx_i_K/view?usp=sharing
Guys, please do give some feedback of the rom and if there is a problem just tell me i'll try to fix it thank you
cant acess your google drive,it needs permission
adam neal said:
cant acess your google drive,it needs permission
Click to expand...
Click to collapse
link updated thanks
aqeelmessi10 said:
link updated thanks
Click to expand...
Click to collapse
You might want to start thinking about syncing your sources again to make a new update after I release mine soon? https://github.com/secretwolf98/cm-...mmit/1d281b6b0943e5d59133e41c5d6260cb5b88336f
secretwolf98 said:
You might want to start thinking about syncing your sources again to make a new update after I release mine soon? https://github.com/secretwolf98/cm-...mmit/1d281b6b0943e5d59133e41c5d6260cb5b88336f
Click to expand...
Click to collapse
what do u mean? im not a professional programmer so im still newbie..i dont have source
no notification bar? no keyboard
pls help.. no notification bar bro
ffitri_96 said:
pls help.. no notification bar bro
Click to expand...
Click to collapse
i already link the keyboard apk on my post and for the notification bar can u screenshot to me how it looks like?
Is this rom will work for T235(which received 5.1.1) or T235Y(Taiwan - which received 4.4.2). They have different chipset marvel and exynos.
Reshan Kariyawasam said:
Is this rom will work for T235(which received 5.1.1) or T235Y(Taiwan - which received 4.4.2). They have different chipset marvel and exynos.
Click to expand...
Click to collapse
srry bro it only works for sm-t231
Congrats guys and to you secretwolf98 i would be interested to know how you finally got the rom to accept the device tree you made.
What is the android version?
i follow every step and succeed but, why i can not use keyboard and no menu file manager?
then I checked the application manager and it turned out that none of the applications are installed.
so, how to solve the problem?
plase help me and sorry for my bad english. :crying:
k-glory said:
i follow every step and succeed but, why i can not use keyboard and no menu file manager?
then I checked the application manager and it turned out that none of the applications are installed.
so, how to solve the problem?
plase help me and sorry for my bad english. :crying:
Click to expand...
Click to collapse
THREAD CLOSED
Guys this is old rom made by me when im still new to ROM making and the rom is kinda buggy so i dont recommend you guys to use it. And actually to want to close this thread but i forgot my old account password now i'll just remove all link from this post to close this thread and use my new rom it's better than this one.. called Pixelized ROM here : https://forum.xda-developers.com/tab-4/development/rom-pixelized-rom-v1-0-t3812839
is it android 5 lolipop or what?
jojo14389 said:
is it android 5 lolipop or what?
Click to expand...
Click to collapse
The Tab 4 can't go past Android 4.4.x KitKat.
MTP
I've tried to port lineage os 14.1 from kminilte (Samsung S5mini) to degaslte (Samsung Tab4 T235Y) cause they have same chipset and gpu. But I have failed because I don't know much about porting roms. I just replaced
these following files from degaslte cm13 to kminilte cm14.1.
1.boot image
ramdisk - charger, default.prop, fastab.universal3470, init.universal3470.rc, init.universal3470.usb.rc, ueventd.rc, ueventd.universal3470.rc
split-img - boot.img-zImage
2.system.new.dat
System/Etc - Bluetooth and WiFi folder, apns-conf.xml, recovery-resource.dat
System/Lib - egl & hw & soundfx folder
System/vendor - firmware folder, lib/ hw folder
Now I facing issue with USB mtp not showing on my tab. Even in cm12.1, cm13, stock rom. Everything works except USB mtp. Twrp mtp also don't work. Please help me to solve this . Which files should I replace to work mtp USB?
Does this make the games run faster/smoother than before?

{UPDATED} and now for Q too. Better Performance and battery for a20 stock Pie

#This is for android Pie..
After reading many topics abut the build.prop file and abut the VM and after many testing. finally i got somthing usefull in performance and battery friendly :fingers-crossed:.
Tested on s6 update and i think it will work with all update.the build.prop attached down here.
# how to:
- unzip the file and open the build.prop with any text editor.
- select all the text and copy.
- use mix explorer and go to system\vendor.
- open system\vendor\build.prop.
- select all text. Delete.
- now after that past what you copy before.
- press save. Then reboot to recovery.
- go to wipe..advanced wipe..and wipe both cach.
- reboot to system.
Post your results after testing:good:
Edit: some people get a problem when copy the all text in rhe bulid.prop file because the diffrent of the model and update.so i will post only the change i made in the codes then it will works with all models and updates and replace the numbers as the following:
Open system\vendor\build.prop
..and change the codes like this
dalvik.vm.heapgrowthlimit=160m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.625
Then scroll down and change like this
ro.config.dha_cached_min=2
ro.config.dha_cached_max=5
ro.config.dha_empty_min=4
ro.config.dha_empty_init=8
ro.config.dha_empty_max=15
ro.cfg.dha_cached_min=6
ro.cfg.dha_cached_max=15
ro.cfg.dha_empty_min=4
ro.cfg.dha_empty_init=17
ro.cfg.dha_empty_max=24
Thats it...now press save. Then reboot to recovery.
- go to wipe..advanced wipe..and wipe both cach.
- reboot to system.
Post the results please.good luck
#{Now for the stock Q} #
[ new update will have ## near the number ]
1_ *edit: new update .better battery life and performance. after tested :good:
open system\vendor\build.prop and replace the codes as the following:
dalvik.vm.heapgrowthlimit=160m
dalvik.vm.heaptargetutilization=0.625
ro.config.dha_cached_min=2
ro.config.dha_cached_max=5
ro.config.dha_empty_min=4
ro.config.dha_empty_init=8
ro.config.dha_empty_max=15
ro.cfg.dha_cached_min=6
ro.cfg.dha_empty_min=4
ro.cfg.dha_empty_init=16
and this
ro.cfg.freelimit_val=11 ## or 10
ro.cfg.dha_cached_max=12
ro.cfg.custom_sw_limit=200
ro.cfg.dha_empty_max=21 ## or 24
* after you replaced all these codes press save. Then reboot to recovery.
- go to wipe..advanced wipe..and wipe both cach.
- reboot to system.
thats is.. good luck for all with a good performance and a good battery life :good::fingers-crossed:
great job
Gollo99 said:
great job
Click to expand...
Click to collapse
Thank you.welcome any time:fingers-crossed:
86 download and just 2 voted?
I can only change system files using twrp
@hooooossamq I had some problems due to my phone being another model (SM-A205G), luckily I had a backup from the original file to restore. In this case I cannot vote =)
cizordj said:
@hooooossamq I had some problems due to my phone being another model (SM-A205G), luckily I had a backup from the original file to restore. In this case I cannot vote =)
Click to expand...
Click to collapse
Whats problem you have with this method? I will copy my phone software inf
৭:-A
معلومات البرنامج (
إصدار One
1.1
Android lo!
إصدار النطاق الأساسي A205FDDS6ATA1
إصدار Kernel
44111
#1 Mon Dec 16 11:44:59 EST 2019
رقم الإصدار PPR 1180610011 A205FXXS6ATA1
حالة الأمان المحسن لنظام Android
Enforcing SEPF SM-A205F_9_0011 Mon Jan 06 15:42:41 2020
إصدار Knox
Knox 3.3 Knox API level 28 TIMA 4.1.0
إصدار برنامج مزود الخدمة SAOMC_SM-A205F_OJM_MID_PP_0014 RZ8M43C7CFV MID/MID, MID/MID
älaa |lzaliudal
I even using it with Ripper kernel .there is no problem and even do better than the stock kernel.
physwizz said:
I can only change system files using twrp
Click to expand...
Click to collapse
Why you can't change els system?
I make the vote to know if its work with all galaxy a20 .and if any one have any idea and edite the numbers of this build.prop file to make it better it will be great.but must be tested by the editor before sharing it here.
good luck for all...
@hooooossamq I got a bootloop for the first time I installed and then I restored the original build.prop and that didn't solve the problem, in the end I have to flash the whole firmware again. It's not your fault though. I guess the problem was caused by our phones being different, my bootloader is 5, yours is 6, my model is SM-A205G and yours is the F variant
cizordj said:
@hooooossamq I got a bootloop for the first time I installed and then I restored the original build.prop and that didn't solve the problem, in the end I have to flash the whole firmware again. It's not your fault though. I guess the problem was caused by our phones being different, my bootloader is 5, yours is 6, my model is SM-A205G and yours is the F variant
Click to expand...
Click to collapse
Ok then.i will post only the codes of what i change.to not make a copy of all the build.prop file so i think it will be save for all model's of a20
Edit: the codes in the first post
Q codes are coming
iam testing now some codes after updating to android Q stock one .and will share the
better performance build.prop method for Q here if any one want it .
till now i got the best codes for best performance and a good battery backup :good: and still testing
edit: the stock Q was good performance fast but a little laggy some time but the battery was draining so fast.so i change the codes many time and testing till i got the best
hooooossamq said:
# {Coming soon for android Q}.
#This is for android Pie..
After reading many topics abut the build.prop file and abut the VM and after many testing. finally i got somthing usefull in performance and battery friendly :fingers-crossed:.
Tested on s6 update and i think it will work with all update.the build.prop attached down here.
# how to:
- unzip the file and open the build.prop with any text editor.
- select all the text and copy.
- use mix explorer and go to system\vendor.
- open system\vendor\build.prop.
- select all text. Delete.
- now after that past what you copy before.
- press save. Then reboot to recovery.
- go to wipe..advanced wipe..and wipe both cach.
- reboot to system.
Post your results after testing:good:
Edit: some people get a problem when copy the all text in rhe bulid.prop file because the diffrent of the model and update.so i will post only the change i made in the codes as the following:
Open system\vendor\build.prop
..and change the codes like this
dalvik.vm.heapgrowthlimit=160m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.625
Then scroll down and change like this
ro.config.dha_cached_min=2
ro.config.dha_cached_max=5
ro.config.dha_empty_min=4
ro.config.dha_empty_init=8
ro.config.dha_empty_max=15
ro.cfg.dha_cached_min=6
ro.cfg.dha_cached_max=15
ro.cfg.dha_empty_min=4
ro.cfg.dha_empty_init=17
ro.cfg.dha_empty_max=24
Thats it...now press save. Then reboot to recovery.
- go to wipe..advanced wipe..and wipe both cach.
- reboot to system.
Post the results please.good luck
Click to expand...
Click to collapse
here I leave you others that are very useful
#Knox
ro.securestorage.knox=false
#Securestorsge
ro.securestorage.support=false
#Boot & Shutdown Animation FPS Boost
boot.fps=32
shutdown.fps=32
ro.config.dmverity=false
ro.config.kap=false
Q codes added
now the Q codes is ready in the first post :highfive: good luck :good:
hooooossamq said:
now the Q codes is ready in the first post :highfive: good luck :good:
Click to expand...
Click to collapse
Just made changes to Ultimate Q
physwizz said:
Just made changes to Ultimate Q
Click to expand...
Click to collapse
you can use the same method and numbers for Ultimate Q too:good: .you can test and try
edit: or you mean that you already try it in Ultimate Q ROM? so if you try it.did you find it usefull?
hooooossamq said:
you can use the same method and numbers for Ultimate Q too:good: .you can test and try
edit: or you mean that you already try it in Ultimate Q ROM? so if you try it.did you find it usefull?
Click to expand...
Click to collapse
I added a link to your thread here
https://forum.xda-developers.com/galaxy-a20/how-to/android-10-q-guide-a20-t4095589
physwizz said:
I added a link to your thread here
https://forum.xda-developers.com/galaxy-a20/how-to/android-10-q-guide-a20-t4095589
Click to expand...
Click to collapse
oh.ok iam happy .you are free to use it
hooooossamq said:
oh.ok iam happy you are free to use it
Click to expand...
Click to collapse
Just a link to your thread
deleted

[OneUI2.5 Note20 Apps Port v1.0][06/08/2020][All Devices with OneUI2.0/2.1 Supported]

Hi guys I want to share with you some apps from Note20 One UI 2.5 Apps. This zip is compatible with all devices running OneUI 2.0/2.1(Android 10). Personally tested on my S9+!
At the moment just some apps are included into my zip such as:
- Clock
- Calendar
- Messaging
- My Files
- Weather (new App style)
- Smart Manager and Digital Wellbeing
- Keyboard (new shortcuts enabled)
- TouchWiz Home (with new little animations)
- Dialer and Contacts
- My Files
- Gallery
- Smart Capture
- Always On Display
- New Samsung Notes
- More to come very soon!
HOW TO INSTALL?
Download the "FLASH_THIS_BEFORE.zip
Flash it and then reboot system
Reboot again to recovery and flash Note20_AppsPort.zip
DISCLAIMER
I will be aware of your problems caused by root like tripped knox... When you flash something like this you may know about the risks you are going to find in!
Some apps are just an upgraded version of your current one so there won't be new style but surely is an improved version
BUGS:
Let me know
IF ANYONE GOT OTHER STUFFS FROM ONEUI 2.5 FIXED IS FREE TO WRITE TO ME OR TO POST HERE!
DOWNLOAD LINK:
FLASH THIS BEFORE: https://www.androidfilehost.com/?fid=8889791610682907398
Note20 Apps Port: https://www.androidfilehost.com/?fid=8889791610682907366
IF YOU LIKE MY WORK JUST PRESS THANK BUTTON OR IF YOU WANT TO SUPPORT ME YOU CAN OFFER ME A COFFEE : [email protected]
Thanks !, waiting for stock wallpapers & live wallpapers port
Is there a reason its only for rooted device, the apk option wont work?
Work on s7 edge with floydQ v3.0 (android 10 one ui 2.1 s9 port) ?
hoss_n2 said:
Thanks !, waiting for stock wallpapers & live wallpapers port
Click to expand...
Click to collapse
Already Ported on another thread :laugh:
ryansarchan said:
Already Ported on another thread :laugh:
Click to expand...
Click to collapse
Where?
segev265 said:
Is there a reason its only for rooted device, the apk option wont work?
Click to expand...
Click to collapse
Same question
Thanks
https://r.tapatalk.com/shareLink/to...7&share_fid=3793&share_type=t&link_source=app
Sent from my SM-G988B using Tapatalk
segev265 said:
Is there a reason its only for rooted device, the apk option wont work?
Click to expand...
Click to collapse
Nope it won't work. They need to be force pushed as system apps and need some extra files.
An APK of these will not install over your previous version. Although some work.
adicken said:
Where?
Click to expand...
Click to collapse
https://forum.xda-developers.com/ga...laxy-note-20-5g-n981-wallpaper-video-t4143763
Wishing there's a way to install these apps with it rooting my phone
Sent from my SM-G988W using Tapatalk
Are 3rd party launcher gestures working on one UI 2.5?
I'm in rooted phone, but none of the apps installed.
mcgomfer said:
I'm in rooted phone, but none of the apps installed.
Click to expand...
Click to collapse
Same. Flashing it in twrp made no difference.
Mounted system
therealroyston2 said:
Same. Flashing it in twrp made no difference.
Mounted system
Click to expand...
Click to collapse
Same here flashed in twrp but cant notice any difference.
Edit. Successful for me on second attempt. Make sure you restart after flashing "Flash before" zip then reboot to twrp and flash the ported apps.
Shomz17 said:
Same here flashed in twrp but cant notice any difference.
Edit. Successful for me on second attempt. Make sure you restart after flashing "Flash before" zip then reboot to twrp and flash the ported apps.
Click to expand...
Click to collapse
Did the same, no luck
therealroyston2 said:
Did the same, no luck[/Q
Didn't work for me either.
Click to expand...
Click to collapse
The apps got installed in system/system/system/apps and priv apps lol.
It made another system folder in system
hey, I have a tab s6 lite for which there is no twrp yet. I have a rooted device, but cannot flash the zip without twrp. tried adb sideload but did not work. How do I flash the zips without twrp??
Dear Bro,
Pls intro how to flash zip file step by step @AlexisXDA

Categories

Resources