Dear Users,
To increase the jio simcard speed for internet i changed my LTE band to "Band 40" by following this link (https://www.youtube.com/watch?v=0mRP3N3lLTo).
Problem is now that other company sim cards are not working in same slot. Only jio sim card work.
I have changed the band value to default but still my sim card is not detecting.
Can anyone help me please? @war_machine, @Umang96, @GuneetAtwal
Related
The preferred SIM is able to pick anything from 2G to 4G, but that causes the standby SIM to have only 2G as a "Preferred Network Type" option.
Is this normal behavior? I made sure the documentation didn't limit the radios on the standby SIM before getting this phone because my one of my carrier does not support 2G, only GSM and LTE.
The SIM works great if I select it as the preferred SIM since it then goes on 3G, but goes back to "Emergency Only" when not preferred.
Is this a hardware limitation on the chipset? I know some other phones are like that (ZenFone 2 for example) but it clearly specifies that limitation on the box. I was expecting both sim cards to be on 3G.
That's dual sim dual stand by on 4g you mean? Forget about it is only marketing on this phone and much other. I have 2 sim from same provider and both 4g or 3g but only one work at same time another has no service same on my LeTv x600. ?
Sent from my x600 using Tapatalk 2
It seems there is much confusion about the DUAL SIM. Maybe I can help... If you insert 2 SIM Cards the following happens, you must choose which card SIM1 or SIM2 will be used for Data Services. Both slots support LTE but only one can be active at the time. Otherwise, both SIM Cards are indeed active (means they support calls and SMS) however the SIM that is not used for Data Service will be "only" shown as GSM (G) while the other will show LTE (4G) in the status bar. Since most providers use GSM for phone calls anyway (regardless of the data connection) your SIM should work both as active and second. Having said all the above, yes, the option for the standby SIM is only 2G - which is really GSM for that matter (or G in the status bar).
GGranello I am not agree with you. In my case provider is not over 2G service only 3G and 4G and have only 2100 band so one of two SIM is with NO SERVICE (of course I can choose The active SIM) but both doesn't work in same time. And for video calls 3G is needed am I wrong? I want to say that on GSM you can't make video calls.
Sent from my x600 using Tapatalk 2
mr.claude said:
GGranello I am not agree with you. In my case provider is not over 2G service only 3G and 4G and have only 2100 band so one of two SIM is with NO SERVICE (of course I can choose The active SIM) but both doesn't work in same time. And for video calls 3G is needed am I wrong? I want to say that on GSM you can't make video calls.
Sent from my x600 using Tapatalk 2
Click to expand...
Click to collapse
Mr. Claude, my description was meant to explain the way the Phone seem to handle the dual SIM. If Your provider supports ONLY calls over 3G and 4G than you will be out of luck using that SIM as secondary. My (I agree limited) understanding is that GSM providers must support GSM calling in any case but that may be no longer the case. I have used the Phone with 2 SIM cards for quite some time now, one with LTE for Data and the other for Calls and SMS and I had no issues. I have not tried any Video Calls as the prices are quite high here, it is my understanding that you need a 3G (or better) connection for those. And even with Android 6, the P9000 does not seem to support VoLTE calling either.
Yes I am agree with you that this phone does not support VoLTE but neither two 4G or 3G SIM from same Network Provider working together or "DUAL STANDBY"
I have owned a number of dual SIM phones and all of them supported 2G/3G/(4G) on one SIM but only 2G on the other. Before the latest MTK SOCs, it was generally the case that SIM slot 1 would support 2G and 3G (and maybe 4G) and slot 2 only 2G. Now it is possible to swap the SIM functions via the settings menu, but one of the SIMs will still be restricted to 2G.
If your SIMs are both from a provider which doesn't support 2G, like Hutchison Three in the UK, then I'm afraid you will only be able to use one of them at a time. There may be dual SIM phones that support 2G/3G/4G on both SIMs at the same time, but I haven't come across one.
Yep me don't even knowing or heard about one phone that's working with both SIM cards on 4G in same time and actually have 3 phones in my hands all 4G and dual SIM and not work either with 2 SIM on 4G in same network.
Sent from my x600 using Tapatalk 2
Hello my everybody, Happy July 4th to you all.
Please does any V10 H962 owner experience this same issue?
Please do you have an idea of what might be wrong with my phone. My dual sim is no long standby. Sim 1 usually get 4G LTE and Sim 2 Gets 3G and 2G voice. Now I can only use either Sim 1 or Sim 2 at once. When One sim on 4G LTE, the second sim will Not get signal/coverage until I switch back to other one. Pls what can I do? I have migrated from MM to Lollipop, still the same issue.
Please any help will appreciated.
In which country are you living?
Most of the mobile carriers are switching off 2g networks. So make sure they are not doing so in your country.
The Lg V10 dual sim puts one sim on 4g and the other on 2g, since the 2g Network is shut off the phone has not signal on the second sim card.
I think it's time to get a new phone that supports 4g on both sims or 4g/3g
hi folks
i picked up this phone the other day. I have a 4g sim required and verified by network. The handset supports the network bandings available in my country.If i put a sim card into sim slot 1 i get a message saying : "this is not a 4g telecom sim" and sim allows me to enter my sim security pin but nothing else. Sim card works in sim slot 2 but as 2g only. I should be getting 3g/4g and no idea why.... any ideas please?? was wondering if cyanogenmod or an alternative rom would fix this issue? thank you in advance.
Hello,
which sim you are use ? and which rom you currently use ?
Thanks for trying ti help.I'm using Meteor Mobile network 4g sim in Ireland and its stock software android 5.0 model nx512j
Is your device supports LTE. But please verify by network is band of Network is supports your device or not. May be your device is not support 4G LTE band with your sim.
Ye mate. Handset supports 4g and 3g 2100mhz which is compatible in my country and sim card has 4g in another handset I tested.
Lordspectre said:
Ye mate. Handset supports 4g and 3g 2100mhz which is compatible in my country and sim card has 4g in another handset I tested.
Click to expand...
Click to collapse
Ok friend. Please send me a error pics so i can more help you
​When we put it into sim1 we get (image attached) but in sim2 we get full gsm coverage + 2g internet.Tested sim in other phone I have an get 4g + 3g on it so sim and network is fine...Even the company I bought the phone off of says it should have no problem working in my country. My sim is a 4g sim verified by my mobile provider.Thank you.
I wonder if installing cyanogenmod would fix the issue?
As per error msg your sim is not 4G try to renew your sim if still YOU get same error then hard reset your cell if still its not works then go for cyanogen mod.
Lordspectre said:
I wonder if installing cyanogenmod would fix the issue?
Click to expand...
Click to collapse
May be your issue will be solved. Because problem is in your sim.
Hi,
I've got a question about using 2 SIM cards.
With the Redmi Note 3 Pro (Kenzo) I have read it was possible to use 2 SIM card but one would be connected to 3G/LTE while the 2nd card would only be connected to 2G. It's not possible to connect both of them on 3G/LTE at the same time. That's exactly what I experienced in the past and I was fine with it.
Right now in my phone I have 2 SIM cards :
SIM1 : Bell Canada (Voice + Data LTE) provided by work. Bell shut down their 2G network a while ago.
SIM2 : Fido (Data LTE only) for personnal use. Fido, owned by Rogers, still has Edge / 2G network.
When I was still on CM13, if I selected my Fido SIM card for my the data connection, I would instantly loose the signal on the Bell SIM card because Bell has no 2G network anymore. It was fine for me that way, it meant I wouldn't receive work related call while I'm not at work (we have a dedicated after hours service and I'm not part of it...) If I selected my Bell SIM card for data, my Fido SIM card would stay connected because Fido/Rogers still have a 2G network.
Today I installed Lineage OS 14.1. Something unexpected happens, if I enable my Fido SIM card, I can see the LTE icon for the Fido SIM but I also keep the connection to the Bell network.
Was the fact that both SIM card couldn't connect to 3G/LTE at the same time a limitation that was lifted in Lineage OS 14.1 ?
Thanks
I'm using 2 sim cards. 1st sim is jio 4g and 2nd is bsnl. When i switch data to 2nd sim bsnl, the network in 1st sim jio goes off and it shows no service. Please help how to resolve this issue, should i try switching the sim cards in both the slots???
You can have lte only on one sim slot at a time. So, if jio is lte only service and you switch to 2nd sim for data, 1st sim (jio) will loose signal, because lte is on 2nd sim.