Related
Hello everybody i recently got the sprint car dock and i was wondering if anyone else has seen this same kind of behavior as I have been seeing. Basically music played using the 3.35mm jack to an aux port on the car stereo just doesn't sound right. It seems like all the sound is going to my rear speakers while i play music from RDIO and my streamed music from Google play. It seems like the audio sounds much better while the phone is not docked. Has anyone else run into this issue? I remember that original Evo's dock did something where it automatically lowered the volume of the music being sent through the 3.35 jack.
When I had the photon and the dock, I had the same issue. Do you have a case on your phone?
If you do try to push down a bit harder with music playing, I bet you your other speakers will start working again.
The USB audio is picky on just how "properly" seated it is. I also noticed (again the photon) the audio is a bit quieter. Eventually I ended up using the mini jack connector and the usb for charging.
So after re-reading your post, I realized you are not talking about USB but the mini jack. What i have noticed however, I was using the 3.55mm today and the radio had to be turned up a bit more to get the normal listening levels I am currently used to (used to be 22-24, now its 30-35 for volume level on my radio) The sound did sound a bit.... off... but could not quite place it. I noticed the beats audio icon on the top when I had the music playing. It does not appear to be customizable except for an on and off?
anoying sound
As soon as I inserted my phone into the car dock with my 3.5 audio jack in it started making a buzzing sound. I double checked that the phone was seated properly and that the audio jacks were all the way secure. The sound disappeared as soon as I removed it from the dock. It is not very noticible if music is playing but if is not it is terrible. Am I the only one?
This is likely a ground loop issue. I'm seeing it with my dock too. But i also see the exact same issue while charging WITHOUT the dock and always have with every phone in my truck. Unplug the charger, issue goes away.
Eventually I'm going to re-ground my cigarette outlet to a cleaner ground in my truck and see if that solves the issue.
modplan said:
This is likely a ground loop issue. I'm seeing it with my dock too. But i also see the exact same issue while charging WITHOUT the dock and always have with every phone in my truck. Unplug the charger, issue goes away.
Eventually I'm going to re-ground my cigarette outlet to a cleaner ground in my truck and see if that solves the issue.
Click to expand...
Click to collapse
Id have to agree. I dont have the sound issue in my truck atm, using an aftermarket Pyle 7in dvd. But Ive had that same issue in other vehicles/devices (not with my LTE). Does the sound increase with the RPM at any range? If so they make a filter (I think its just a magnet idk) that can clear up that sound.
modplan said:
This is likely a ground loop issue. I'm seeing it with my dock too. But i also see the exact same issue while charging WITHOUT the dock and always have with every phone in my truck. Unplug the charger, issue goes away.
Eventually I'm going to re-ground my cigarette outlet to a cleaner ground in my truck and see if that solves the issue.
Click to expand...
Click to collapse
I do not have the issue at all when I disconnect from the dock. In fact, its minimal once I start to play something like Pandora. But as soon as I don't have something playing the buzzing kicks in and its annoying as hell. I have two 12v ports in my car and several different chargers and it does them for all of them. I think it may be something HTC knows about but hasn't confirmed yet...
modplan said:
This is likely a ground loop issue. I'm seeing it with my dock too. But i also see the exact same issue while charging WITHOUT the dock and always have with every phone in my truck. Unplug the charger, issue goes away.
Eventually I'm going to re-ground my cigarette outlet to a cleaner ground in my truck and see if that solves the issue.
Click to expand...
Click to collapse
This is pretty much spot on. I had to re ground one if my cigarette lighters that did this with my zune.
Sent from my EVO using Tapatalk 2
donatom3 said:
This is pretty much spot on. I had to re ground one if my cigarette lighters that did this with my zune.
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I'm not saying that it wasn't the case for you, because it certainly is possible. However, correct me if I am wrong, you had the problem regardless of if the phone was in the car dock correct?
I ONLY have the problem when it is in the car dock. That makes me think it's not the 12v plug.
bds369 said:
I do not have the issue at all when I disconnect from the dock. In fact, its minimal once I start to play something like Pandora. But as soon as I don't have something playing the buzzing kicks in and its annoying as hell. I have two 12v ports in my car and several different chargers and it does them for all of them. I think it may be something HTC knows about but hasn't confirmed yet...
Click to expand...
Click to collapse
Can you try something? Take the same charger and try it with the phone in another car. One thats less then 10 years old if possible. (Not that its some magic age of the car, just better/properly grounded radios are more common, imo) Report back and let us know if the sound persists in that vehicle? Thanks
*Not saying yours, or anyone with the problems vehicle is 10+ years old - just wondering if it persists elsewhere.
bds369 said:
I'm not saying that it wasn't the case for you, because it certainly is possible. However, correct me if I am wrong, you had the problem regardless of if the phone was in the car dock correct?
I ONLY have the problem when it is in the car dock. That makes me think it's not the 12v plug.
Click to expand...
Click to collapse
I've had it on multiple devices that had their power adapter plugged into the car. There is also a chance it's your power adapter.
This is not an uncommon problem in car audio, it's so common that many manufacturers make devices to try to reduce the noise. http://www.radioshack.com/product/index.jsp?productId=2062214
Try adding a ground loop isolator into the audio cable. They can't be bought just about anywhere (Amazon, Radio Shack, etc.) for about $15 and should eliminate and ground loop noise. Ground loop noise is why it is so hard to find a car dock that includes audio out. Companies understand consumers want a car dock with 3.5mm audio out but wouldn't be able to design a dock that would eliminate noise in every case.
Filtering the audio line with a ground loop isolator is not a solution for me. They often dramatically reduce high tones and degrade audio quality overall. A real solution is to solve the issue on the electrical side, not the audio side.
OK, I think I understand what you are saying now. I get the normal ground loop whine that I have always gotten in my truck, that changes pitch with RPMs. Known issue with all phones in my truck, whatever.
But today I also noticed a Static (1 second) Static (1 second) Static (1 second) Static (1 second) that was only noticable when my phone was in the dock, plugged in, no music playing (in between songs) AND the beats audio logo was visible (beats was off, I do not use it). Beats logo goes away (when there is more than a second or two of silence) and the static stops. I'm not sure if the static is stopping then because the beats signal processor is turning off, or because the phone is turning off power to the headphone jack. If it is the beats processor turning off, I could try to make a mod to always keep it off (I don't use it anyway).
Is anyone seeing this static (static, not whine) while plugged in but NOT in the dock?
Is this what the OP is seeing? How about the rest of you?
modplan said:
OK, I think I understand what you are saying now. I get the normal ground loop whine that I have always gotten in my truck, that changes pitch with RPMs. Known issue with all phones in my truck, whatever.
But today I also noticed a Static (1 second) Static (1 second) Static (1 second) Static (1 second) that was only noticable when my phone was in the dock, plugged in, no music playing (in between songs) AND the beats audio logo was visible (beats was off, I do not use it). Beats logo goes away (when there is more than a second or two of silence) and the static stops. I'm not sure if the static is stopping then because the beats signal processor is turning off, or because the phone is turning off power to the headphone jack. If it is the beats processor turning off, I could try to make a mod to always keep it off (I don't use it anyway).
Is anyone seeing this static (static, not whine) while plugged in but NOT in the dock?
Is this what the OP is seeing? How about the rest of you?
Click to expand...
Click to collapse
I am not the OP but I am getting the exact same results that you are. It sounds perfect when not in the dock. When in the dock it makes a terrible buzzing noise until I start to play something. I have tried multiple chargers including OEM HTC ones in multiple vehicles and the problem still persists. How can ground loop be non existent when I'm charging my phone with just the cable (outside of the dock)? It has to be something else. I ordered the HTC Stereoclip yesterday and should have it be the end of this week to test wireless play.
willyam111 said:
Try adding a ground loop isolator into the audio cable.
Click to expand...
Click to collapse
I already had one installed for my Epic, and still get the noise on my EVO....
Just out of interest, is the 3.5mm jack going into the Phone, or is it tied into the charger cable. I currently have a MOTO Atrix and the Car Dock USB Cable splits off with an Aux Jack connection. That way you don't need to keep plugging the Aux Cable into the phone everytime you dock. I've never had any interference with this approach.
I'm getting the EVOLTE as soon as possible, so I'm interested in this answer. Plus, how it's being connected may be part of the problem?
csyrell said:
Just out of interest, is the 3.5mm jack going into the Phone, or is it tied into the charger cable. I currently have a MOTO Atrix and the Car Dock USB Cable splits off with an Aux Jack connection. That way you don't need to keep plugging the Aux Cable into the phone everytime you dock. I've never had any interference with this approach.
I'm getting the EVOLTE as soon as possible, so I'm interested in this answer. Plus, how it's being connected may be part of the problem?
Click to expand...
Click to collapse
There is no audio jack coming out of the dock. You still have to use the one on the phone itself.
So I took apart the dock and there is one small chip inside. Seems like a lot for what should just be usb passthrough. I tried removing the blue led hoping that that was the cause of the interference but it did not help.
There are lots of resistors and capacitors on this board. Does anyone know of we remove them all it will be straight usb passthrough? I get MUCH less interference in my truck with just charging and NOT the dock using the same cable. I good way to test this is to turn the Media volume all the way down on your phone and up high in ur vehicle and you will get tons of static and popping.
Any electrical engineers in the crowd? I if not I guess I have to buy a stereo clip :-(
Sent from my EVO using XDA
Those electronics are probably what activate Car Mode.
ahecht said:
Those electronics are probably what activate Car Mode.
Click to expand...
Click to collapse
Activating car mode is done my simply shorting pins 4 and 5 on the USB connector, no electronics required and is why the dock will still put your phone into car mode when not even plugged in.
Full description of the problem:
I just got my EVO 4G LTE the other day, as a replacement to my original EVO 4G. However, I noticed when it was plugged into my car's AUX port, it puts out a high-pitch (like a teapot) noise. This noise happens as long as the headphone jack is powered up (something playing). Even if I turn the phone's volume down all the way, the high pitch is still heard. Otherwise, the audio from the phone can also be heard normally.
Things I've tried:
1. Different cables known to work. All act identically.
2. Headphones. They work fine.
3. Another car's AUX port. Worked fine.
4. Jiggling the jack on either end causes the pitch to change momentarily, but does not go away.
5. Slightly unplugging it from the car side (so one of the channels is not connected) makes it go away, leaving me to believe the high pitch noise is only coming from one channel (I believe the right channel, hard to tell).
Things I don't want to do:
1. Get a new car stereo.
2. Use a Bluetooth adapter. I already have the Stereoclip, and it doesn't do phone calls. Anything else sounds awful with music.
Does anyone have any solutions? I think its some sort of strange feedback/grounding issue, but I have no idea how I would fix this.
I don't have a solution, but I am experiencing the same issue with the phone plugged into my car's AUX. As long as music is playing I can't really hear the whine, but between songs it's pretty annoying.
I haven't tried playing around with the different EQ settings. By default it's been going to Beats. I may switch to a different setting or try a different player like Winamp. I'm currently using the HTC media player.
jasonkc25 said:
I don't have a solution, but I am experiencing the same issue with the phone plugged into my car's AUX. As long as music is playing I can't really hear the whine, but between songs it's pretty annoying.
I haven't tried playing around with the different EQ settings. By default it's been going to Beats. I may switch to a different setting or try a different player like Winamp. I'm currently using the HTC media player.
Click to expand...
Click to collapse
In my experience it has absolutely nothing to do with what app is being used, nor the EQ. It's nothing software as far as I can tell.
This fixes it:
http://www.amazon.com/Kensington-Reducing-SmartPhone-including-iPhone/dp/B0031U1ATQ
if your phone is plugged into the car charger and your audio jack is plugged in to listen to music. what our hearing is a ground loop from the cars alternator. try unplugging the power supply and see if that helps..
papadunit said:
if your phone is plugged into the car charger and your audio jack is plugged in to listen to music. what our hearing is a ground loop from the cars alternator. try unplugging the power supply and see if that helps..
Click to expand...
Click to collapse
The car charger makes no difference. I have tried using nothing but the audio cable in the phone and still had the static.
I was under the impression that a normal ground loop would require a charger, but...
Modplan: are you sure this will fix it if the noise occurs even without the charger plugged in? The noise is high-pitch, not really a hum, so I'm wary as to whether it will help here.
Its not a simple ground loop problem. I wired my power to the phone using a separate ground from the car's common ground and the issue still persisted.
Try cranking the volume up then when you hear the noise, start playing with the touchscreen. When i did this the noise started changing according to the movement of my fingers. I concluded that there is something going on with the grounding of the capacitive display thats causing another grounding issue, but its not an issue with the car, but an issue with the phone.
I didn't want to go through the vicious cycle of returning my phone over and over until i get one that didn't have this fault so i just went with a samsung hs3000 hardwired in to my car.
lacrossev said:
Its not a simple ground loop problem. I wired my power to the phone using a separate ground from the car's common ground and the issue still persisted.
Try cranking the volume up then when you hear the noise, start playing with the touchscreen. When i did this the noise started changing according to the movement of my fingers. I concluded that there is something going on with the grounding of the capacitive display thats causing another grounding issue, but its not an issue with the car, but an issue with the phone.
Click to expand...
Click to collapse
I wasn't able to replicate this.
I've had the same issue, but it's only when charging. I figured it had something to do with the aluminum body and, as papadunit said, a problem with grounding and your car's alternator and blah blah blah science.
modplan said:
This fixes it:
http://www.amazon.com/Kensington-Reducing-SmartPhone-including-iPhone/dp/B0031U1ATQ
Click to expand...
Click to collapse
I'm happy to report that this actually did solve the problem, amazingly. Thanks!
Actually had same issues this passed weekend but with my asus transformer. Was using it for navigation tethering from evo with both charging from my 400w inverter. Plugged transformer into aux and had same high pitching noise only when inverter was plugged in. Even tried different audio cables, same chit.
Sent from my EVO LTE
Headset Jack's other issues
I can confirm the same behavior with my EVO 4g LTE. My HTC Touch Pro 2 or Iphone 4s never had any of these issues with my vehicle's AUX jack. I also verified that if I turn the volume on the phone all the way down that the noise is audible on the vehicle's sound system. It also doesn't matter what player I use or if I add any equalizer settings to the audio. Finally, the noise is present whether the car is running or not.
Can you guys confirm: If you pause the audio on your player does the whine end about 4 seconds after and startup again if you press play? Or if you shut the player down does the noise go away shortly after?
I did some research and some said it has to do with the AUDIO DAC in the phone turning on and off as audio is played, paused, etc. If the output device has high sensitivity these sounds appear.
I had another issue with my Plantronics wired headset distoring when making phone calls. It did not present the whine but it distorted the callers voice as if the treble or bass was too high. I tried various audio settings but nothing changed. With other headsets the issue does not present itself. I think that the audio DAC is also sending higher/lower frequencies that are greater than some headsets can handle.
That Kensington thing that was posted can easily be made with common household parts. Basically all you need to do is take the big bulgy thing from any cable that would have it and attach it to your audio cable. It works best if you have one near each end of the cable. it's called a clamp-on ferrite bead and is just a clip with iron ferrite in the middle. Since i'm new I can't post a link buuuut what I can do is tell you the keywords to look up on google for the ehow link: cable magnets eliminate emi . enjoy!
lacrossev said:
Its not a simple ground loop problem. I wired my power to the phone using a separate ground from the car's common ground and the issue still persisted.
Try cranking the volume up then when you hear the noise, start playing with the touchscreen. When i did this the noise started changing according to the movement of my fingers. I concluded that there is something going on with the grounding of the capacitive display thats causing another grounding issue, but its not an issue with the car, but an issue with the phone.
I didn't want to go through the vicious cycle of returning my phone over and over until i get one that didn't have this fault so i just went with a samsung hs3000 hardwired in to my car.
Click to expand...
Click to collapse
Mine changes pitch according to my cars rpms
Sent from my EVO
I am getting this with headphones, i have used multiple brands and its hit or miss but more hit than miss :laugh:, anyone getting it in there headphone?
I was getting this issue until I installed a custom ROM. Running MeanROM right now with no background noise. Seems counterintuitive to me...but whatever.
J
Sent from my EVO using xda app-developers app
dankorzon said:
That Kensington thing that was posted can easily be made with common household parts. Basically all you need to do is take the big bulgy thing from any cable that would have it and attach it to your audio cable. It works best if you have one near each end of the cable. it's called a clamp-on ferrite bead and is just a clip with iron ferrite in the middle. Since i'm new I can't post a link buuuut what I can do is tell you the keywords to look up on google for the ehow link: cable magnets eliminate emi . enjoy!
Click to expand...
Click to collapse
http://www.radioshack.com/product/index.jsp?productId=3012599
Dankorzon, is this what you're talking about? If so I'm going to go get some tomorrow. I'm having this feedback issue too, but it is only when the car charger is plugged in. But I'd love to get rid of that sound. Drives me crazy.
SOLVED: I used a ground loop isolator
I posted earlier that I had the whining noise in my car even with the engine off. So it wasn't related to an alternator issue. I use a Blitzsafe (blitzsafe.com) device to add a line level input jack to my Honda Accord's stock radio interface. It works well with all my other devices except the Evo 4g LTE. This past weekend I did a little tinkering and noticed that if I pulled the RCA jack on one channel (left or right) every so slightly so the ground tabs weren't touching the noise disappeared. With only one channel connected the noise is not present. I'm not sure why the noise is present with both channels connected but it definitely pointed to a ground loop problem. I did some research in audio forums and some said that a wire could be jumpered so the RCA ground touches the receiver chassis and that would solve the problem. Unfortunately that did not do anything. I touched several different grounding points near the receiver but the sound was always present.
I went to Best Buy and purchased this: http://www.bestbuy.com/site/Fierce+...36.p?id=1218186610567&skuId=9855136&st=ground loop&cp=1&lp=1 It works great. For whatever reason the EVO 4g LTE's DAC must be sensitive or not have the right filter to block the ground signal. This explains why the Kensington product also works.
I also solved my headset issue. I can confirm that older corded Plantronic headsets will not work well with the EVO. The EVO distorts the speaker in the headset. I'm pretty sure it's because it sends lower bass frequencies than the speaker can handle. Only solution was to use a newer headset.
Thanks all for your help.
phiphiJR said:
http://www.radioshack.com/product/index.jsp?productId=3012599
Dankorzon, is this what you're talking about? If so I'm going to go get some tomorrow. I'm having this feedback issue too, but it is only when the car charger is plugged in. But I'd love to get rid of that sound. Drives me crazy.
Click to expand...
Click to collapse
That is what he is talking about, but that is NOT what the kennsington device is. Google "ground loop isolator" for info on what the kennsington is, it is NOT simply an aux cord with ferrite beads on it.
I've got the same problem in my car. This only happens when plugged into the charger. I'm going to try a ground loop isolation device which will arrive sometime next week.
I guess I don't understand why the phone would only do this when no music is playing though. It makes me think maybe a patch could solve the issue if HTC knew what the issue was.
I've got an aux input in my car, and today when I tried plugging in my GSIII, I got met with a faint but annoying whistling sound underneath my music.
It stops if there's no sound being sent over the wire, but the moment a notification (or music) starts playing, it comes up.
Car worked fine with my DX, and still works fine with my friends' iPhones, but I get the stupid sound with my brand new galaxy siii. Oddly enough, it works fine with headphones.
any ideas guys? I'm kinda stumped.
Search ground loop isolation. You are getting dirty power to your phone.
Sent from my SPH-L710 using xda premium
none
Do you have the phone charging through the cigarette lighter? You can get ground noise from there, and it will be transmitted through the phone to your stereo.
Hm. Let me try again without it charging, but that's strange. Why did my old DX not experience this?
Assuming that's the issue - will a different cable solve the problem?
edit: So I checked the phone without plugging it into the charger. Still get a whistling noise. It's really more like a high pitched hum. I notice that if I don't plug the plug in all the way it doesn't happen (but I think I only get one channel).
I'm getting the same thing, and it's driving me crazy. At first I thought my brakes were going bad in my car!
I've tried different audio players and apps, but it still always get the noise. The phone is not charging, and I did not get this with my old captivate either.
Any ideas?
Doesnt happen in my Porsche. I'm using Bluetooth audio though.
Sent from my SGH-T999 using Tapatalk 2
Thats strange. I will get that when charging, but only while nothing is playing.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
I am having the same issue. First time experiencing it though; never heard it with the iPhone, HOX, or NS
I'm using a line in cable, and when i jiggle it, i can hear the noise change tone at the same time. I have a feeling it might be because it's a regular stereo cable and the microphone combo jack on the phone is not working right with it. But that's just a guess.
It's pretty annoying and its making the phone unusable as a music player.
Happens in my Lamborghini (Dodge Caravan) when using a MP3 player. Usually, if I run my hand down the cable it clears as though it's some kind of static build up in the cable.
Sent from my Transformer TF101 using xda premium
try flipping the cable (putting the aux in side into the phone and the phone side in the aux in) it happens to me sometimes and if I flip the cable it clears it out I couldn't tell you why though. also make sure there isn't any dust in the ports or on the cable ends.
That noise you hear is most likely due to the electrical system in the car. I rent cars all the time for work and never know the shape the electrical sys is in so to resolve the issue I bought a Kensington Cable from amazon and now have CD quality sound from any music app including pandora & spotify.
Hope this helps.:cyclops:
rmelendez3 said:
try flipping the cable (putting the aux in side into the phone and the phone side in the aux in) it happens to me sometimes and if I flip the cable it clears it out I couldn't tell you why though. also make sure there isn't any dust in the ports or on the cable ends.
Click to expand...
Click to collapse
Unfortunately, my cable is RCA on one side (L+R channels split) and regular 3.5mm on other.
nyciz said:
That noise you hear is most likely due to the electrical system in the car. I rent cars all the time for work and never know the shape the electrical sys is in so to resolve the issue I bought a Kensington Cable from amazon and now have CD quality sound from any music app including pandora & spotify.
Hope this helps.:cyclops:
Click to expand...
Click to collapse
Not sure what you mean by "the electrical system" and the "shape" of it. Could you clarify? As I said, I have no problems with other devices in this car.
I would usually suspect something wrong with the car, or maybe a ground loop, but I can plug in my Galaxy S (Captivate) or iPod with the same cable, same everything, just switching out the phone, and the noise goes away.
The way the noise cuts in and out between songs, and when I close the music app, it seems to only happen when the audio chip is getting a signal or is being energized. This is making me think that it may just be a noisy chip :crying:
I was on conf call with SGS3 plugged to AUX, no power charging was going on. And either noise canceling didn't work, or noise was getting in thru AUX line to receiving end. I didn't have problems listening, but ppl on the other end complained, and I had to mute the mic.
:crying:
cashyftw said:
doesnt happen in my porsche. I'm using bluetooth audio though.
Sent from my sgh-t999 using tapatalk 2
Click to expand...
Click to collapse
sorry! Could you speak up please? I couldn"t hear you over the sound of your e-penis
I am having the same problem. My HTC Thunderbolt never had this problem. Same car and cables, I get the hissing and popping until I play something. Then it goes away until I stop the music and then it comes back again. Weird and disappointing.
The problem comes from the 4-pin (TRRS) audio jack in the GSIII combined with presumably bad grounding in my 2007 Honda Accord, or the Aux adapter.
I fixed it with a simple DIY solution. I cannibalized a TRRS headphone jack and bought a TRS (3-pin) port from radioshack. I clipped off the jack with a generous portion of wire, then stripped them and cleaned them from their insulation (they are covered in insulating dye).
I connected 3 of the wires to the TRS connector, and taped the whole thing up. No more hum.
Also known as Road Noise. Where the power cable and audio input are too close to each other. Electrical current emits a small magnetic field which will hinder audio quality and promote road noise from the alternator.
This is a very typical senario in car audio install, when you run the power cable and rca right next to each other.
this buzzing noise happens to me every time i drive my car for the past 3 years:
solution: turn down the car volume. if you keep your car volume half-way, then you wont hear it as much, or you wont hear it at all.... you can make the phone volume as loud as you want though. also, as you accelerate faster, the noise gets louder. watch, try it.
To who ever can help...I'm experiencing an ongoing problem with headphones on my m8. Trying to listen to music is either one sided (left bud) or none at all. If I plug into my stereo, the Jack works and music is played normal. Coming from headphones to stereo, it goes one sided (even playing through the stereo).
I've changed ROMs with full wipe & clean install, the problem still occurs. Various headphones all do the same. I'm almost positive it's a software glitch somewhere but can't find a setting for it. I've tried freezing music apps with TB, I've also installed HK to see if that would tweak something. No clue what else to do.
To clarify, are you saying that using a line cable to connect the phone to your stereo receiver/amp plays both sides. But all headphones, it only plays on one side?
Correct...I CAN play music via aux cord but CAN"T play through headphones of any kind (I've tried three different ones).
Bump
Different headphones use different rubber moldings around the wires, especially near the plug. Some can be thicker and some have little plastic protrusions which prevent the cable from being fully plugged in. If the cable isn't fully inserted, you will sometimes receive no audio in the right ear or no audio at all. I have this problem with a pair of Sony earbuds on my S4 and my M8, and as a result, they're dedicated strictly to my laptop.
Try this...get a male to female aux cord and plug one end to the phone, then plug your headphones into that.
Also, you can try pulling back the plastic sheath around the plug and see if that helps.
slapdaddy said:
Try this...get a male to female aux cord and plug one end to the phone, then plug your headphones into that.
Also, you can try pulling back the plastic sheath around the plug and see if that helps.
Click to expand...
Click to collapse
I'll definitely try this out and see what happens. Its just weird because when I first got the phone the headphones worked (any and all). It wasn't untill I rooted that I started noticing an issue.
Or just cut a bit of the rubber off the edge of the headphones. With the case on my phone I had to do that for the aux jack in my car so that it would go all the way in. Of course only if they are your headphones and don't mind to do that.
Sent from my HTC One_M8 using XDA Premium 4 mobile app
How about the headset that came with the phone? This shouldn't need any jiggering to make it plug in properly.
I would also agree with the notion that if you have a case on the phone, it may interfere with the headphone plugging in. Definitely try taking the case off (if you have one on) to see if it makes any difference.
Have you tried any headphones that don't have the microphone ("normal" headsets that aren't specially intended to use with smartphones)? Its just odd that a AUX cable works, and headphones don't. The only thing I can think that can be different is the hardware and software differences that are associated with the microphone (buttons, etc.).
Are there specific lines of code I can look at in the build .prop? I've gotten half the battle covered by Uninstalling HK and fixing permissions /wiping dalvik. Again music plays perfectly through stereo, whether aux, wifi or bt. One sided when headphones are used. There has to be some funky code going on.
I know this is old but did you ever find out?
So figured I'd go ahead and add a thread about this here for us Sprint users that are experiencing the problem with the Aux cable. Its a known issue and I'd link to a couple other posts, but I'm still a "noob"
I was a little upset to find that I wasn't able to use my phone to Pandora in the car.
However....
Today I got it to work, and here is how: I had the stereo set to the CD player when i plugged the AUX cable in and the icon stayed in the notification bar. Then I launched Pandora and let it start playing. THEN I switched the stereo to AUX mode, and it played fine my entire trip to work. Still experienced the "hot plug" sound between tracks, but I think I can deal with it.
geetee360 said:
So figured I'd go ahead and add a thread about this here for us Sprint users that are experiencing the problem with the Aux cable. Its a known issue and I'd link to a couple other posts, but I'm still a "noob"
I was a little upset to find that I wasn't able to use my phone to Pandora in the car.
However....
Today I got it to work, and here is how: I had the stereo set to the CD player when i plugged the AUX cable in and the icon stayed in the notification bar. Then I launched Pandora and let it start playing. THEN I switched the stereo to AUX mode, and it played fine my entire trip to work. Still experienced the "hot plug" sound between tracks, but I think I can deal with it.
Click to expand...
Click to collapse
I recall having an issue with my samsung headphones. They didn't work at one point, I rebooted and they were fine. The phone didn't even detect them for some reason. I've had no issues with aux in my car (aside from needing a new cable), however I thought it would be worth mentioning that my Note 2 had an issue with aux when it is on any AOSP ROMs. Selecting any app, even swiping the notification window down, sometimes even just leaving the music app and going back will stop the music from playing. The only solution for this was to go to the home screen unplug the aux start music playing and plug the cable back in and touch no other app. Again, it never did this with stock. I even went back to stock briefly because of this. AOSP seems to throw a fit with the aux cables.
I had issues with AUX today as well. Thought it was my specific phone but I'm relieved to know it's common....and perhaps a software issue.
infernosoft said:
I had issues with AUX today as well. Thought it was my specific phone but I'm relieved to know it's common....and perhaps a software issue.
Click to expand...
Click to collapse
Yeah I have it as well...I've found if I start Spotify, then plug in the AUX cord from my car, it works fine.
So I think I know the answer to this one.
It seems to have to do with how cars and some other devices treat aux inputs. For the most part it appears (at least in the case of my Prius) that with the input switched to aux the phone would not consistantly stay aux mode. What it seems like was happening is that the car doesnt actually 'activate' the aux port unless it senses a completed circuit (ie: audio playing). I have to believe this has to do with preventing feedback.
Unfortunately it seems the phone does the exact same thing. The headphone or aux symbol appears on insert of the cable because the phone senses the initial connection but then finds no load on the circuit thus assuming it is not connected and disables the port. You end up with basically an electronic stalemate. Neither one engaging cause they sense nothing from the other side. No load on the circuit.
Bear in mind this is completely dependent on the device you are connecting to your phone, as to whether it does what I'm talking about. Likewise, those experiencing popping or similar during song or track changes would basically be experiencing the same issue as during the song change the phone stops playing audio and your car kills the port. When the car kills the port, the phone kills the port, or is in the process of it when the next song starts.
To counteract this I bought an audio cable with a ground loop circuit built in. It is designed to remove the buzz from car aux audio due to the phone or other device being charged through the car's power system. But the added benefit is that it creates an artificial load on the line that the phone senses. Same idea as plugging in headphones as the earphone on the headphones creates a load on the line in the same way.
This is the audio cable I bought. Works like a charm every time, although one warning. I did experience one case of very loud static when unplugging it through the speakers in my car because of the fact that the car and the phone believe the circuit constantly is active and thus do not kill the connection to save your hearing. So be careful to only plug or unplug it when the input is not active or the car is off.
http://www.amazon.com/Kensington-Reducing-SmartPhone-including-iPhone/dp/B0031U1ATQ/
It does appear that Amazon has put the item under review for now, though I'm not sure why as mine works flawlessly, but any similar car aux noise reducing cable would work, assuming its decent quality.
An aux cable with an in-line volume control should peform similarly due to the load created by the potentiometer, although it wouldnt remove the charger buzz.
Something like this:
http://www.amazon.com/Apollo23-3-3-Volume-Control-Samsung-Smartphones/dp/B00COXA8Y4
wolfhelm said:
So I think I know the answer to this one.
It seems to have to do with how cars and some other devices treat aux inputs. For the most part it appears (at least in the case of my Prius) that with the input switched to aux the phone would not consistantly stay aux mode. What it seems like was happening is that the car doesnt actually 'activate' the aux port unless it senses a completed circuit (ie: audio playing). I have to believe this has to do with preventing feedback.
Unfortunately it seems the phone does the exact same thing. The headphone or aux symbol appears on insert of the cable because the phone senses the initial connection but then finds no load on the circuit thus assuming it is not connected and disables the port. You end up with basically an electronic stalemate. Neither one engaging cause they sense nothing from the other side. No load on the circuit.
Bear in mind this is completely dependent on the device you are connecting to your phone, as to whether it does what I'm talking about. Likewise, those experiencing popping or similar during song or track changes would basically be experiencing the same issue as during the song change the phone stops playing audio and your car kills the port. When the car kills the port, the phone kills the port, or is in the process of it when the next song starts.
To counteract this I bought an audio cable with a ground loop circuit built in. It is designed to remove the buzz from car aux audio due to the phone or other device being charged through the car's power system. But the added benefit is that it creates an artificial load on the line that the phone senses. Same idea as plugging in headphones as the earphone on the headphones creates a load on the line in the same way.
This is the audio cable I bought. Works like a charm every time, although one warning. I did experience one case of very loud static when unplugging it through the speakers in my car because of the fact that the car and the phone believe the circuit constantly is active and thus do not kill the connection to save your hearing. So be careful to only plug or unplug it when the input is not active or the car is off.
http://www.amazon.com/Kensington-Reducing-SmartPhone-including-iPhone/dp/B0031U1ATQ/
It does appear that Amazon has put the item under review for now, though I'm not sure why as mine works flawlessly, but any similar car aux noise reducing cable would work, assuming its decent quality.
An aux cable with an in-line volume control should peform similarly due to the load created by the potentiometer, although it wouldnt remove the charger buzz.
Click to expand...
Click to collapse
I just want my G3 to work as it should for such a simple function as the headphone jack/aux port.
I want to listen to music in my car without fannying around with different cables etc etc.
I had a Galaxy Note and S4, both played fine in the same car with the same cabling.
Shame on LG for releasing us a substandard product that cannot perform the most basic of tasks correctly.
I will say, i was extremely dissapointed when i plugged my shinny new phone into my stereo and the audio continued to come through the phone speakers. All other phones/devices work just fine in my car and there is no reason why my G3 shouldn't either.
R2DeeTard said:
I will say, i was extremely dissapointed when i plugged my shinny new phone into my stereo and the audio continued to come through the phone speakers. All other phones/devices work just fine in my car and there is no reason why my G3 shouldn't either.
Click to expand...
Click to collapse
My first feeling was confusion. I was also worried my headphones wouldn't work. But I was able to watch a beautiful high def video on my phone last night with my headphones on
Sent from my LGLS990
I just got this phone too, and although I love it, I was very sad to have this issue! I haven't had it on any other phone I have owned, so I certainly hope it is fixed in a future update. That and the video force close bug, but that is for another thread!
Guys, there is nothing wrong with the AUX port on your cars -- and they don't trigger via sound. They trigger via either conductive circuitry or via ohm load. Can you test if you are still seeing these problems when *not* charging? This issue is typically related to bad grounds. This happens to me at work when my phone is charging and I plug my headphones directly into my G3. If I pass the audio to my PC first (to the line-in,) and THEN to my headphones, the static is mostly gone.
So try unplugging the power source, and using different aux cables. Another factor is try plugging the power source into the same feed as the stereo. Sometimes this isn't that easy though.
What's happening on the back end with the sound changing between songs, etc, is that the audio codec, (the chipset,) is turning off to conserve battery. For me, when the chip turns on, it grounds the 3.5mm port just fine, and when it's off, AND I have power connected with headphones, I can get that whine -- depending on the scenario. So basically, this is by design -- an energy conservation tactic. I would be okay with them leaving the audio chip on the entire time headphones are connected.
Had this problem too and found that as long as I was charging the phone it would play like it should.
Yep, grounding issue. At work, routing the aux signal through my PC works just fine WHILE charging -- if I unplug, then I get all the machine noise.
In general, though, the headphone output is pretty crappy on this device. Even when it's "working great," there is still a faint amount of white noise that can be heard. Much higher than my HTC M7. The S5 had similar performance as the G3 though.
I just bought:
http://www.amazon.com/gp/product/B00ANDHBNS/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
And plugged it into:
http://www.amazon.com/gp/product/B00F474DVG/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
So when I get in my car, it connects to the dongle for music and the car's blue tooth for phone.
It's not perfect, but gets the job done.
wolfhelm said:
So I think I know the answer to this one.
It seems to have to do with how cars and some other devices treat aux inputs. For the most part it appears (at least in the case of my Prius) that with the input switched to aux the phone would not consistantly stay aux mode. What it seems like was happening is that the car doesnt actually 'activate' the aux port unless it senses a completed circuit (ie: audio playing). I have to believe this has to do with preventing feedback.
Unfortunately it seems the phone does the exact same thing. The headphone or aux symbol appears on insert of the cable because the phone senses the initial connection but then finds no load on the circuit thus assuming it is not connected and disables the port. You end up with basically an electronic stalemate. Neither one engaging cause they sense nothing from the other side. No load on the circuit.
Bear in mind this is completely dependent on the device you are connecting to your phone, as to whether it does what I'm talking about. Likewise, those experiencing popping or similar during song or track changes would basically be experiencing the same issue as during the song change the phone stops playing audio and your car kills the port. When the car kills the port, the phone kills the port, or is in the process of it when the next song starts.
To counteract this I bought an audio cable with a ground loop circuit built in. It is designed to remove the buzz from car aux audio due to the phone or other device being charged through the car's power system. But the added benefit is that it creates an artificial load on the line that the phone senses. Same idea as plugging in headphones as the earphone on the headphones creates a load on the line in the same way.
This is the audio cable I bought. Works like a charm every time, although one warning. I did experience one case of very loud static when unplugging it through the speakers in my car because of the fact that the car and the phone believe the circuit constantly is active and thus do not kill the connection to save your hearing. So be careful to only plug or unplug it when the input is not active or the car is off.
http://www.amazon.com/Kensington-Reducing-SmartPhone-including-iPhone/dp/B0031U1ATQ/
It does appear that Amazon has put the item under review for now, though I'm not sure why as mine works flawlessly, but any similar car aux noise reducing cable would work, assuming its decent quality.
An aux cable with an in-line volume control should peform similarly due to the load created by the potentiometer, although it wouldnt remove the charger buzz.
Something like this:
http://www.amazon.com/Apollo23-3-3-Volume-Control-Samsung-Smartphones/dp/B00COXA8Y4
Click to expand...
Click to collapse
I just purchased this:
http://www.amazon.com/Kensington-Reducing-SmartPhone-including-iPhone/dp/B0031U1ATQ/ref=sr_1_1?ie=UTF8&qid=1406313911&sr=8-1&keywords=kensington+noise+reducing+car+audio+aux+cable
Working pretty well. Mainly solves the connectivity issues.
Still have the pop between tracks but it's much better.
Still have the "computer talk" garbage noise related to the display coming through the left channel.
I can live with this until LG or Android comes up with a fix.
aux problem
I guess I lucked out with my phone but then again maybe not. First off I will describe my setup, I have a 05 Subaru WRX with stock 6cd changer head unit ( no aux port ) I installed a Harmon Kardon Drive + Play iPod dock. This allows me to remote control my iPod and comes with a display that shows tracks and such. It works by FM transmitter but has an optional wire which I have that connects directly between the antenna and the stereo so you get little to no loss of signal. Between the AUX and my phone I connected a PAC SNI-1/3.5 3.5-mm Ground Loop Noise device. My previous phone was an LG Optimus G which I loved, when I hooked this phone up I could listen to Pandora/TuneinRadio through my car speakers and upon making/receiving a call I would hear the call through the car speakers and when I talked the phone mic. would pick up my voice. When I attempt this with the G3 I get no popping between tracks but the phone mutes the mic and when I say mute I don't mean the mute button comes on I mean the other person can't hear me. I found if I unplug and plug the phone in during the call eventually the mic works again, but to do this while driving defeats the purpose of hands free calling. Does anyone else have this problem? (or a solution).
Click to open expanded view
gorillaz1 said:
Yeah I have it as well...I've found if I start Spotify, then plug in the AUX cord from my car, it works fine.
Click to expand...
Click to collapse
Works for me, thank you.
Mines does not work at all, with headphones or aux Jack, now I have to get Bluetooth headphones and bluetooth radio for car
Sent from my LGLS990 using XDA Free mobile app
Do we know if LG is working on this issue? Or if it is something that can even be fixed with an update? I'm getting tired of messing with the cable just to play music in my car, and I don't want to have to buy extra accessories to get the job done.
Sent from my LGLS990 using XDA Free mobile app
Bumping this thread because I just started having issues. Last night I was listen to music with headphones and my device kept turning itself down. I thought it was Tasker at first but it kept happening. Today at work I wanted to listen to music on headphones again and the sound would only come through my device. I'm going to try an aux and other headphones when I get off work, but does anyone know if a system restore will fix this? I'm rooted with TWRP, I just don't want to wipe it for nothing.
Srambo217 said:
Bumping this thread because I just started having issues. Last night I was listen to music with headphones and my device kept turning itself down. I thought it was Tasker at first but it kept happening. Today at work I wanted to listen to music on headphones again and the sound would only come through my device. I'm going to try an aux and other headphones when I get off work, but does anyone know if a system restore will fix this? I'm rooted with TWRP, I just don't want to wipe it for nothing.
Click to expand...
Click to collapse
They fixed it with ZV6. If you're already on ZV6 then I have no idea.
Sent from my LGLS990 using XDA Free mobile app