huawei ascend g610-u20 bootloop - Android Q&A, Help & Troubleshooting

Dears,
plz help if somebody can...!
i tried to flash cwm recovery .image file with flashify without knowing of boot-loader unlocking initially, didn't backup also. and after restart its in bootloop until now.
tiried to flash the stock rom with sp flash tool and even with the box too but no success as i'm unable to start flashing because it restarts.
the thing is it doesn't go into recovery mode. from fast-mode, computer or magic box it disconnects automatically due to its bootloop/restarting.
any professionals pls help, i'll be thankful greatly....

dskpoison said:
Dears,
plz help if somebody can...!
i tried to flash cwm recovery .image file with flashify without knowing of boot-loader unlocking initially, didn't backup also. and after restart its in bootloop until now.
tiried to flash the stock rom with sp flash tool and even with the box too but no success as i'm unable to start flashing because it restarts.
the thing is it doesn't go into recovery mode. from fast-mode, computer or magic box it disconnects automatically due to its bootloop/restarting.
any professionals pls help, i'll be thankful greatly....
Click to expand...
Click to collapse
you try soft Erase Tool , link ;https://drive.google.com/file/d/0B3CCjqbTuz5RUTY2ckJKWWp5LTg/view

Related

[Q] Help needed urgently Please

Hi guyz im new 2 xda
I have a serius prob actualy i have karbonn a1(clone of zte n721and also have same hardware and software of huawei pulse mini and huawei u8150) problem is that my device is stucked on boot logo and nothing is working like i tried to go into recovery mode and also in bootloader mode but no luck. also tried from pc with adb and fastboot but it also not worked (whenever i connect my phone to pc it automaticaly detected as adb interface)i also installed usb drivers correctly n still no luck
This happend when i tried to flash recovery n boot image via terminal emulater... when it giving me out of space error i rebooted my cell n this happend.... plz plz plz help me guyz
what exactly did u do ???u tried to flash cwm ?
No i mean i already succesfuly flashed cwm but still i could not go into recovery mode so i thought flashing custom recovery and boot image can solve this problem n then i tried to flash these 2 images via terminal emulater but then i got out of space error while flashing so i rebooted my cell n stucked on boot logo
did u try flashing othr custom rom ?
How can i flash other rom even i cant go into recovery mode

[Q] Huawei G610 Full Factory Reset

Following up a guide to install CWM, I bricked my Huawei G610. It is on bootloop now. No Fastboot access too.
Any hardware key combination to re-install stock firmware including Recovery?
I recall few phones had a process to put ROM on SDcard and with special hardware key combinations, it used to re-flash fron SDcard.
Help will be appreciated.
sadnblueish said:
Following up a guide to install CWM, I bricked my Huawei G610. It is on bootloop now. No Fastboot access too.
Any hardware key combination to re-install stock firmware including Recovery?
I recall few phones had a process to put ROM on SDcard and with special hardware key combinations, it used to re-flash fron SDcard.
Help will be appreciated.
Click to expand...
Click to collapse
Check on need Rom G610 U20, Download ROM, unzip, theres a doc. file guide attached how to install..
Joe_Live said:
Check on need Rom G610 U20, Download ROM, unzip, theres a doc. file guide attached how to install..
Click to expand...
Click to collapse
Already followed that but it doesn't go to upgrade mode. Tried 2 SDcards so shouldn't be a bad SDcard issue.
If I plug the computer with Laptop, it detects phone but phone keeps rebooting hence I can't control the phone through SP Flash or ADB or other tools. Even in Fastboot mode, it restarts.
Same issue here
Any Luck with your device?
stuck in Bootloop
I faced the same problem after trying to flash TWRP recovery img. I used MobileUncle Tools to flash it. It asked Reboot in recovery, I pressed OK. and it never ran into recovery mode. Its stuck in bootloop now. Any way out? Have tried through ADB but fastboot doesn't work...
My problem was solved by Huawei. I claimed my warranty!
To solve this issue use sp flash tool without batry
Sent from my HUAWEI G610-U20 using Tapatalk
Help
thesumanthapa said:
I faced the same problem after trying to flash TWRP recovery img. I used MobileUncle Tools to flash it. It asked Reboot in recovery, I pressed OK. and it never ran into recovery mode. Its stuck in bootloop now. Any way out? Have tried through ADB but fastboot doesn't work...
Click to expand...
Click to collapse
I have encountered the same problem Is there any solution
sadnblueish said:
Already followed that but it doesn't go to upgrade mode. Tried 2 SDcards so shouldn't be a bad SDcard issue.
If I plug the computer with Laptop, it detects phone but phone keeps rebooting hence I can't control the phone through SP Flash or ADB or other tools. Even in Fastboot mode, it restarts.
Click to expand...
Click to collapse
hi I got the same problem today. can you tell me how did you resolve your issue long time ago.
thanks
Abbas
mobdanish said:
hi I got the same problem today. can you tell me how did you resolve your issue long time ago.
thanks
Abbas
Click to expand...
Click to collapse
Over 2 years now and I probably have changed 4 phones. Don't remember. But to help you. you may try this:
http://forum.gsmhosting.com/vbb/f810/huawei-g610-u20-bootloop-problem-1776731/
my phone isn't working, every time i open my phone it says "unfortunately, dev stopped working". and there are too many viruses that keeps on downloading. any idea how to fix this? huawei-g610-U20

My Lenovo S930 - Broken Cache Partition (Pls Help !!)

My Lenovo phone S930..I tried to flash MysticOS Ver3.0 custom rom using CWM..The Recovery Said That I Succesfully installed/flased the rom..then i reboot the system .. It Just Keep Showing The Lenovo logo then go back to the cwm recovery back..and have a error
Can't open E/cache/recovery/log
Can't open E/cache/recovery/log
Can't open E/cache/recovery/last_log
Can't open E/cache/recovery/last_log
So i tried to find at google for the solution to fix this problem..but everything showed that i have to flash stock rom..i tried to use sp flash tool to flash stock..but my phone is not detect on my computer..but i already installed the driver but still doesn't work..so my phone just stuck at recovery .. Nothing i can do..
any solution for this?? :crying:

UMI Z stuck in BOOTLOOP! NEED HELP

Hi i bought a umi z not long ago and today i wanted to install twrp thanks to this link
Then i wanted to root it thanks to super su.
So I install SPFlash tool on my computer and downloaded the recovery twrp on my phone. It worked great until I wanted to reboot into android. And than !!!! problem. I'm in bootloop. Nothing to do. The people who did it also said they were all satisfied. I need help pleease. After several unsuccessful tries I find myself without Custom Recovery and without system.
HELP ME:crying::crying::crying::crying:
You can flash stock ROM again with SP flashtool.
Shut down phone. DL stock Rom. Extract this and flash whit SP tool. Works. Great.
First switch off your phone, staying the power button more than 10 seconds (release as soon as the bootanimation deseappears).
Then on your PC launch SP flash tool and use the scatter file of the last version ( https://forum.xda-developers.com/umi-z/development/compilation-original-roms-t3549971 ), start download, connect phone to PC and all is ok ! But factory reset...

Please please help! The current image have been destroyed error in real me narzo 20 pro . Unable to fast boot also.

I have recently root my phone by using recovery.img and twrp. But after patched magisk.img I am getting error "The current image (Boot/recovery) have been destroyed and can not boot. I am unable fastboot my phone as when i pressed any combination of keys its wither just restart to same message or restart to same message with recovery mode text.
Guys please please help if anyone have any solution.
Since it's a mediatek phone, download Sp flash tool on your pc, get the required files and flash the stock realme firmware/rom using sp flash tool. After that, the device will return to normal with its original rom.
Look for a tutorial on how to do this, it's really simple and quite easy.
If my post helped you out, please mark it as the solution so that anyone else with this problem will know what to do.

Categories

Resources