I'm trying to retrieve the IMEI using Z3X Samsung Tool Pro, but whenever I go in reparation him from this error, have not tried the reset EFS because I'm afraid of a problem, and yes, I have done backup EFS, my device is the Galaxy S6 Edge G925I
Operation: Repair
Selected model: SM-G925I
Software version: 24.3
If you are looking for 'Repair Network' function then you should use 'Patch Certificate'
Waiting ADB device... OK
Reading phone info...
Model: SM-G925I
Android version: 6.0.1
Product code:
Phone version: G925IDVU3EPC3
PDA version: G925FXXU4DPIL
CSC version:
CSC country code: UK & IRE
CSC sales code: BTU
HW version:
Phone S/N: 00000000000
Modem board: SHANNON333
RF cal date:
IMEI:
Checking Super user right... true
Initialization AT RIL...
Exception: Access violation at address 004074E0 in module 'SamsungToolPRO.exe'. Read of address 00000000
Hi, I honestly have no clue, what the error means, but did you try to start the program as administrator? Rightclick it and select start as admin. Maybe it's just that it requires more permissions and due to the lack of it, it can't read or write something. Also do you have usb debugging enabled? And did you confirm the: Do you want to allow access from this device prompt on your phone?
Sent from my SM-G925F using XDA Free mobile app
Related
Hi Guys, new to this so please indulge me a little!
Purchased two GT-P5100 Samsung Galaxy Tab 2s for the kids, checked the software version using *#1234# and received this:
AP: P5100UBALD4
CP: P5100UBLD4
CSC: P5100UUBALD4
Connect them to kies and it displays: latest firmware version: PDA:LD4 / PHONE:LD4 / CSC:LD4 (TTT)
Checked these at SamMobile:
GT-P5100 - Trinidad and Tobago
PDA: P5100UBALD4
CSC: P5100UUBALD4
Version: 4.0.3
Modified: 2012-04-17
Checked in firmware and files for Australian version (XSA) and found that here sammobile. com/firmware/?page=3&model=GT-P5100&pcode=XSA&os=1&type=3#firmware
Downloaded the firmware and flash programs files. Flash programs contained odin3 V1.87 and signed_espresso_20120220_16G.pit Firmware file contained: P5100XWALE3_P5100XSAALE1_P5100XXLD7_HOME.tar.md5
Put the tab into download mode after shutting down using power+volume right then volume left to enter odin mode.
Connected the tab with the usb cable, attached the pit file using PIT button then attached the md5 file using the PDA button. Re-partition deselected, auto-reboot & f.reset time were both selected, flash lock not selected. Pressed the start button. Process completed and the tab rebooted as normal.
Tried using *#1234# and received this:
AP: P5100XWALE3
CP: P5100XXLD7
CSC: P5100XSAALE1
When I connected to Kies I now see this:
"Your devices current firmware version is not supported to update firmware via Kies.
Current firmware version: PDA:LE3 / PHONE:LD7 / CSC:LE1 (TTT)
I assumed rightly or wrongly that the country designator should have changed to XSA. Does anyone have any idea if I have missed something in the process?
I checked Setting > About Device:
Model Number:
GT-P5100
Android version:
4.0.3
Baseband version:
P5100XXLD7
Kernel version:
3.0.8-546364-user
[email protected]#1
Build Number:
IML74K.P5100XWALE3
Within status, device status is normal
Appreciate any advice you can offer.
Cheers Paul
PaulCsyd said:
Hi Guys, new to this so please indulge me a little!
Purchased two GT-P5100 Samsung Galaxy Tab 2s for the kids, checked the software version using *#1234# and received this:
AP: P5100UBALD4
CP: P5100UBLD4
CSC: P5100UUBALD4
Connect them to kies and it displays: latest firmware version: PDA:LD4 / PHONE:LD4 / CSC:LD4 (TTT)
Checked these at SamMobile:
GT-P5100 - Trinidad and Tobago
PDA: P5100UBALD4
CSC: P5100UUBALD4
Version: 4.0.3
Modified: 2012-04-17
Checked in firmware and files for Australian version (XSA) and found that here sammobile. com/firmware/?page=3&model=GT-P5100&pcode=XSA&os=1&type=3#firmware
Downloaded the firmware and flash programs files. Flash programs contained odin3 V1.87 and signed_espresso_20120220_16G.pit Firmware file contained: P5100XWALE3_P5100XSAALE1_P5100XXLD7_HOME.tar.md5
Put the tab into download mode after shutting down using power+volume right then volume left to enter odin mode.
Connected the tab with the usb cable, attached the pit file using PIT button then attached the md5 file using the PDA button. Re-partition deselected, auto-reboot & f.reset time were both selected, flash lock not selected. Pressed the start button. Process completed and the tab rebooted as normal.
Tried using *#1234# and received this:
AP: P5100XWALE3
CP: P5100XXLD7
CSC: P5100XSAALE1
When I connected to Kies I now see this:
"Your devices current firmware version is not supported to update firmware via Kies.
Current firmware version: PDA:LE3 / PHONE:LD7 / CSC:LE1 (TTT)
I assumed rightly or wrongly that the country designator should have changed to XSA. Does anyone have any idea if I have missed something in the process?
I checked Setting > About Device:
Model Number:
GT-P5100
Android version:
4.0.3
Baseband version:
P5100XXLD7
Kernel version:
3.0.8-546364-user
[email protected]#1
Build Number:
IML74K.P5100XWALE3
Within status, device status is normal
Appreciate any advice you can offer.
Cheers Paul
Click to expand...
Click to collapse
all that you do its correct, you dont miss enything.
Maybe your tab was imported from another region, and that's happened when you try to update with kies(not supported)
Don't worry, i'll be waiting for kies(or OTA) to update my tab from last year...and nothing.
Last week i get my tab updated with odin and fw from samfirmware.
As log as you use official rom you are in warranty .
Note that you're posting this in the Galaxy Tab forum when your device is a Galaxy Tab 2. Posting your question in the appropriate forum will more likely find other Australian users.
Thanks
k1mu said:
Note that you're posting this in the Galaxy Tab forum when your device is a Galaxy Tab 2. Posting your question in the appropriate forum will more likely find other Australian users.
Click to expand...
Click to collapse
Thanks for your input, I managed to solve the problem myself by performing a factory reset. Device now displays XSA in Kies.
Hello, im trying to repair i9300 imei with z3x box and during the process im supposed to connect to UART Cable...and im advised to type
*#9090# and select speed 115000 but i only get following menus:
END
BACK
KEY INPUT
SELECT HELP, and
WIFI
What to do? help
Are you following an i9300 guide? Not qualcomm?
Sent from my GT-I9300 using Tapatalk 4 Beta
rootSU said:
Are you following an i9300 guide? Not qualcomm?
Sent from my GT-I9300 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I dont understand...just trying to repair imei with z3x box...any tutorial to that?
you're already following a guide according to your post. is it a guide for the i9300?
Glebun said:
you're already following a guide according to your post. is it a guide for the i9300?
Click to expand...
Click to collapse
Yes, im stuck at this point:
Selected model: I9300
Selected port: COM4 Z3X BOX Serial Port
Selected port speed: 115200
Searching Samsung modem... detected COM445
Reading phone info...
Software version: I9300XXDLJ1/NONE/I9300OJVDLJ1
IMEI:
Product code: XXXXXXXXXXXXXX
Done with Samsung Tool v.15.0
Selected model: I9300
Selected port: COM4 Z3X BOX Serial Port
Selected port speed: 115200
Searching ADB device... OK
Reading phone info...
Model: GT-I9300
Android version: 4.1.1
Product code: Unknown
Phone version: Unknown
PDA version: I9300XXDLJ1
CSC version: I9300OJVDLJ1
IMEI: Unknown
Checking Super user right... true
Reading data from phone... OK
Repairing network settings... OK
Writing data to phone... OK
Rebooting phone... OK
Now connect phone to UART cable
Checking phone at COM4
Port open fail COM4
Done with Samsung Tool v.15.0
WHat to do when it says "connect to UART cable". I connect cable from box to phone still says error!!
I have a S2 phone, out of warranty was bought from Spain under the Vodafone carrier. So is not stolen/imei blacklisted or other stuff i saw around.
Was bought by a good friend of mine, now he upgraded to S3 and his old S2 went to me, i think it was rooted, had superuser and acces to /efs/.nv_data.bin. to copy them from /device to /sdcard and also had busybox installed.
Phone shows even the airplane (with ariplane mode off) or the circle with the / inside and IMEI pops with " null/null ".
I did try GSII_repair and unlock software while i had the 4.1.2 software instaled as it came (from my friend) but no use.
I did try to get the nv_data.bin file with a hexedit and search for the 181468 (if i'm not wrong) line for the FF 01 00 00 00 stuff and change the 01 to 00, ofc nothing found about that line. Also between the .bak and .bin file since i remember was no difference at all.
I did try another method to search in the nv_data.bin for the SGH thing about the serial number, again without finding anything.
I tought a stock ROM will help, so i found a tutorial and with Odin3 v1.85 i've put this rom GT-I9100_XEU_I9100XWLP7_I9100XXLPS_I9100XEULP5.tar.md5 with the pda button. Of course the phone turn on and freeze on the S2 logo, than went on MENU+VOL Up+power, and did a whipe and turned on the phone. This went to 4.0.2 with :
Build nr.: IML74k.XWLP7
PDA: I9100XWLP7
CSC: I9100XEULP5
kernel
3.0.15-I9100XWLP7-CL340913
[email protected] #3
Again *#06# and babam, IMEI nothing there.
So i did upgrade again to 4.1.2 I9100XWLSE_I9100OXELS6_I9100XXLS8_HOME.tar.md5 with oding on the pda tab and now shows:
Build nr.: JZ054K.I9100XWLSE
kernel
3.0.31-889555
[email protected] #3
SMP PREEMPT KST 2013.
PDA:I9100XWLSE
CSC:I9100XELS6
Baseband unknown, Imei unknown but now shows something for SN, this: SN: 00195ef068dfae.
Also found some codes *#7465625# -wich shows nothing and than when i try to enter service menu for debung and stuff also shows nothing.
So found another tutorial to add 3 files in Odin, the PDA option (that i used 2 times) and the PHONE and CSC options with 2 more files to upload. I will download, try and post back.
Thanks in advance for any1 wich reads/reply/helps or talks on this theard.:good:
p.s. I tried a soft called SRS with 3 free options to change null imei to 0004999 or something and it tells that phone is not rooted in this moment, and he might be right and here cames the qestion, while you change ROM you lose the root and su because if not, than means phone was not rooted, but hard to think at that because i could acces the /efs folder. Complete mind**** here....
edit: i did try that rom 4.1.2 with I9100XXLSJ_I9100OXXLS1_OXX with the 3 files below
pda: CODE_I9100XXLSJ
csc: CSC_HOME_OXX_I9100OXXLS1
modem: MODEM_I9100XXLS6 Still no baseband/imei and yeah for sure phone is not rooted now, should i root the phone and than .... try what? throw it on window / use it as ipod device ?
edit: found what is suppoused to be my original fimware Latest firmware from Spain / Vodafone carrier (ATL)... i will try to flash it with odin and see what happens.
GT-I9100 Galaxy S II
PDA: I9100XWLSD
CSC: I9100ATLLSC
MODEM: I9100BULS1
Added: 2013-02-04
You do that.
You're looking for a EFS folder back up, check out ktool to see if you can recover the IMEI.
Also call your friend and ask him how the IMEI got lost and if he backed up the EFS folder at any point.
Sent from the little guy
gastonw said:
You do that.
You're looking for a EFS folder back up, check out ktool to see if you can recover the IMEI.
Also call your friend and ask him how the IMEI got lost and if he backed up the EFS folder at any point.
Sent from the little guy
Click to expand...
Click to collapse
Thanks for your answer and support.
1. This stupid problem came out of nowhere and he did not had a backup on anything.
2. Found out the device was not rooted when that happen (4 days ago) and his bigger brother tryed to use suroot and some tools like ktool or something and another useless tool, and that was the moment when he created the backups.
3. So backups were created after, phone was not rooted when it happen, no backups at all. Now i've put the 4.1.2 baseband, rooted the device, installed jeebo kernel, did try some Dalkvin wipe from cwm but still no result, when i got the phone had no serial number at all, and i don't know how i managed by swamping from rom to rom to get a SN like 00195ef068dfae, this is not the SN but make me feel better than a empty SN field.
I guess that Z3X box would do miracles, but in my city (Brasov, Romania) no1 has one at workshops, found one for about 120$ but at around 100$ i can get a MB to swamp...but still i can not afford that at the moment...
Did try Ktool/gsII_repair and efs repair (chinese verison smthing) without any result like the 3rd time but now with my own root and cwm and stuff. This is another backup made with ktool 5mins ago http://dl.xda-developers.com/attach...5454/2/1/3/5/1/7/5/EFS_Backup_with_K-tool.zip
Also managed to use EFS pro, did a backup, tried to repair baseband/format efs... nothing works
When i try now to repair emai /baseband-again, show an error about mounting /efs
---------- Hardware Information ----------
Connected Device SN.: 00195ef068dfae
Device Manufacturer: SAMSUNG
Device Model: GT-I9100
Product Code: Unknown
Hardware Version: Unknown
---------- Firmware Information ----------
PDA Version: I9100XWLSD
Baseband Version: Unknown
CSC Version: I9100ATLLSC
---------- Software Information ----------
Kernel Release: 3.0.31-Jeboo_Kernel_v1.2a+
Kernel Version: #26 SMP PREEMPT Mon Jan 28 22:48:56 EST 2013
ROM Build: GT-I9100-user 4.1.2 JZO54K I9100XWLSD release-keys
Android Version: 4.1.2
BusyBox Version: 1.20.2-jb
SU Binary Version: 0.97:SUPERSU
Hi, trying to fix a Samsung Galaxy s2, cant make any calls, noticed there's no IMEI, when typing in *#06# it shows: null/null tried to use the z3x box to repair the EFS and also install the correct IMEI number its showing this information:
----------------------------
Selected model: I9100
Selected port:
Selected port speed: 115200
Reading phone info...
Model: GT-I9100
Android version: 4.1.2
Product code: Unknown
Phone version: Unknown
PDA version: I9100XWLSW
CSC version: I9100CPWLS4
IMEI: Unknown
Checking Super user right... true
Reading data from phone... OK
Writing data to phone... OK
Rebooting phone... OK
Searching Samsung modem... not found
Done with Samsung Tool v.15.2
-------------------------------
But when I check the *#06# it's still showing null/null?
Just got the Z3X Box, so not really sure what I'm doing yet, any ideas on what to do would be very gratefully appreciated, I was thinking of reinstalling the firmware but not sure what to do?
Thanks
Look at you tube on how to work z3x . kids doing it on there. :thumbup:
mate looks like u dnt have modem go to general and find modem thread find right for u or ur location boot into cwm and flash should help
Sent from my GT-I9100 using xda premium
A friend asked to replace the screen on his i9300 as i've done a few before,
The phone was fine until after I fitted the screen, no signal, looked at the imei its null with baseband unknown. the phone was working before I changed the screen as he was using the phone when he come to mine to drop it of.
now ive spent three days trying to fix this phone, with no luck. being reading many threads all over the internet about upgrading
the rom etc. still the same tho.
I managed to get a cheap z3x box on line, but that cant fix this either.
here is a log from z3x
Selected model: I9300
Selected port: COM7 Z3X BOX Serial Port
Selected port speed: 115200
Searching ADB device... OK
Reading phone info...
Model: GT-I9300
Android version: 4.3
Product code: Unknown
Phone version: Unknown
PDA version: I9300XXUGMK6
CSC version: I9300OXAGMK6
IMEI: null
Phone S/N: Unknown
Checking Super user right... true
Reading nv data... OK
Checking magic... not found
any ideas will be appreciated.
Weird if just changing the screen corrupted the efs but irrespective how it happened you need a backup of the efs folder to restore. If you don't have a backup then service centre required.
If you have a box then read the dead boot thread in general forum, the later stages might work.
Sent from my GT-I9300 using Tapatalk
No efs back up.
what you mean by if I a Box? what box?
ive looked for the dead boot thread but cant find?
I've cp unknown now too.
Is they any links for i9300 firmware that is mg5 please? And mg2 modems please?
I really need to fix this i9300
Also if I post my efs backup from the phone can someone check it to see if it's missing any needed info?