Hello! Some day i want to downgrade my Marshmallow to Lollipop. I installed stock ROM to my Honor 5X but in older android - Lollipop 5.1. And I get bricked it. On start on screen i can see first-step logo honor after it i can see second-step honor's logo and here i wait 30 minutes and nothing 45 minutes and nothing. Worse is this I can't back to my stock Marshmallow, when I'm installing my previous ROM - MM i get the same brick on second-step logo. I installed a few more ROMs and nothing. My bootloader is unlocked but when i try to flash cust/system by fastboot appear an error. FAILED (remote: Command not allowed). I think i tried everything, thank for help me.
PS. Sorry for bad English :/
EDIT.1 I tried to use this method from Thread: http://forum.xda-developers.com/honor-5x/help/ive-bricked-honor-5x-t3324225. But the same problem at fastboot.
cust and system won't get flashed on 5X, try force updating it with an UPDATE.APP package for your device.
Put it inside dload folder in root of the Sdcard, and press all three buttons (Vol UP + Vol DOWN + Power) after switching off your phone, to start updating.
Sent from my PLK-L01 using Tapatalk
Thank you. But i tried to get ROM back by UPDATE.APP and when i want to go back to Marshmallow i get second-step honor logo and nothing after it. When i want to get Lollipop i have error "Software can't be installed" - something like that. I heard something about "Transition package" or "Downgrade Package" ? Maybe it can be work. But i can't find those packages for honor 5x KIW-L21.
Bayont said:
Thank you. But i tried to get ROM back by UPDATE.APP and when i want to go back to Marshmallow i get second-step honor logo and nothing after it. When i want to get Lollipop i have error "Software can't be installed" - something like that. I heard something about "Transition package" or "Downgrade Package" ? Maybe it can be work. But i can't find those packages for honor 5x KIW-L21.
Click to expand...
Click to collapse
If the Marshmallow update went through a bit, then you'll need transition package, so take on some pain to find it. It should be out there somewhere.
Sent from my PLK-L01 using Tapatalk
That's maybe becouse i don't remove ROOT and Xposed before installing ROM, how to unroot by TWRP?
Bayont said:
That's maybe becouse i don't remove ROOT and Xposed before installing ROM, how to unroot by TWRP?
Click to expand...
Click to collapse
If you use the this version of TWRP > https://www.androidfilehost.com/?fid=24588212152305793
you can flash system.img and cust.img extracted from your Update.APP with HuaweiUpdateExtractor
fastboot boot twrp.img
then copy the files to the phone
then choose Install / Install Image / system.img or cust.img or recovery.img boot.img ..you choose
Also just saying your have a L21 does not help
is it KIW-L21 C432 or KIW-L21 C185
Now i backed to B130 and i have loop with message Optimizing system... this process going to 100% and phone reboot. And it looping.
Bayont said:
Now i backed to B130 and i have loop with message Optimizing system... this process going to 100% and phone reboot. And it looping.
Click to expand...
Click to collapse
your post tells us nothing about what you did, are we suppose to guess ?
if you successfully flashed System.img - boot .img - cust.img and recovery.img you can now use the dload / Update.app
clsA said:
if you successfully flashed System.img - boot .img - cust.img and recovery.img you can now use the dload / Update.app
Click to expand...
Click to collapse
Done but without any effect, the same problem, stuck at second-step honor logo ;/
Any ideas?
Bayont said:
Any ideas?
Click to expand...
Click to collapse
Well considering I still don't know what you have done. Its hard to guess the next step
Sent from my SM-N920T using Tapatalk
Ok, one more time. When i'm installing any ROM B130 or B330, stock or official doesn't matter, the same problem. After installing rom by UPDATE.APP my phone booting and booting and booting and nothing. When i'm installing rom images by TWRP - boot, cust, system It's the same problem Booting, booting and nothing. When i tried to flash rom by fastboot i have error: FAILED (remote: Command not allowed). I would like to try this: http://forum.xda-developers.com/honor-5x/help/how-restore-cust-partition-t3356769 But i don't know how to access to adb shell: when i type "adb shell" in cmd where i have adb it say to me: error: device '(null)' not found. I don't know what to do more.
How much time honor 5x system is installing?
How i can check my honor is KIW-L21 C432 or KIW-L21 C185?
Bayont said:
How i can check my honor is KIW-L21 C432 or KIW-L21 C185?
Click to expand...
Click to collapse
If you tried to install the wrong Update.app the updater would get to 5% and stop and eventually just reboot. Did you actually watch the update go to 100% and reboot ?
I think i found source of my problem. When i want to downgrade my system was B340.
I read something about downgrade. Without Transition Package I can't downgrade my system I can install only the same (B340) or higher.
This making brick when i'm installing B330 or B140.
Now i'm trying to install OTA B340 and i have another problem,
when i have B330 and installing B340 by small OTA 124MB I have stuck on 5% of installing. It becouse:
EDIT 2 : If you come from B330, don't try to flash the small B340 update as local update has simply been disabled by theHuawei/Honor devs !
Worse, with B340 you won't be able to downgrade to any lower version : at least not easily... INFO FROM: HERE
Click to expand...
Click to collapse
But when i'm installing B130 by TWRP and upgrading to B340 by big upgrade (1,36GB) it's stucking on 0% and i get info: DO NOT UNPLUG....
I think that becouse my version isn't B130 only B140. I'm checking it by DC-UNLOCKER. Output from it:
Code:
Found Phone : KIW-L21
Model : Huawei phone in fastboot mode
Serial NR. : My Serial
Firmware : KIW-L21C432B140
FB LockState: LOCKED
widevine LockState: UNLOCKED
Bootloader Lock State: UNLOCKED
Root State: ROOT
Bootloader WidevineKey: WidevineKey_VALID
System State: Bootloader in UNLOCKED state
Bootloader Version: 001.001.000
Battery state: battery is present
Maybe I should Restore backup from diffrent KIW-L21 by TWRP?
Bayont said:
I think i found source of my problem. When i want to downgrade my system was B340.
I read something about downgrade. Without Transition Package I can't downgrade my system I can install only the same (B340) or higher.
This making brick when i'm installing B330 or B140.
Now i'm trying to install OTA B340 and i have another problem,
when i have B330 and installing B340 by small OTA 124MB I have stuck on 5% of installing. It becouse:
But when i'm installing B130 by TWRP and upgrading to B340 by big upgrade (1,36GB) it's stucking on 0% and i get info: DO NOT UNPLUG....
I think that becouse my version isn't B130 only B140. I'm checking it by DC-UNLOCKER. Output from it:
Code:
Found Phone : KIW-L21
Model : Huawei phone in fastboot mode
Serial NR. : My Serial
Firmware : KIW-L21C432B140
FB LockState: LOCKED
widevine LockState: UNLOCKED
Bootloader Lock State: UNLOCKED
Root State: ROOT
Bootloader WidevineKey: WidevineKey_VALID
System State: Bootloader in UNLOCKED state
Bootloader Version: 001.001.000
Battery state: battery is present
Maybe I should Restore backup from diffrent KIW-L21 by TWRP?
Click to expand...
Click to collapse
Normally restoring a TWRP backup is no different than flashing System.img and boot.img
your bootloop is firmware related ... you need the full B340 package
Yes, you written in Honor 5x Repo:
Waiting for full B340 to appear on Honor support site.
Click to expand...
Click to collapse
At the moment there isn't any full B340 ROM for download. And any OTA B340 doesn't work for me, yes? For example:
B140 -> B340
http://update.hicloud.com:8180/TDS/d...ull/update.zip
changelog
http://update.hicloud.com:8180/TDS/d.../changelog.xml
Click to expand...
Click to collapse
Bayont said:
Yes, you written in Honor 5x Repo:
At the moment there isn't any full B340 ROM for download. And any OTA B340 doesn't work for me, yes? For example:
Click to expand...
Click to collapse
Then you just have to wait
I don't publish the updates I just post them
Sent from my SM-N920T using Tapatalk
I can't back to Stock Lolipop by editing some files or install B340 from B140 by OTA
Related
So i need to flash a cust.img through recovery because fastboot doenst work gives me "remote:command not allowed fastboot" but if i want to flash it through the recovery it says "Error: File larger then target device" i basicly only need to flash the cust.img to fix my phone.
What i tried:
Use fastboot, tried new version of android SDK
flashed diffrent recoverys, same results.
Please help i really need my phone ;/
Demian3112 said:
So i need to flash a cust.img through recovery because fastboot doenst work gives me "remote:command not allowed fastboot" but if i want to flash it through the recovery it says "Error: File larger then target device" i basicly only need to flash the cust.img to fix my phone.
What i tried:
Use fastboot, tried new version of android SDK
flashed diffrent recoverys, same results.
Please help i really need my phone ;/
Click to expand...
Click to collapse
Are you on stock rom? if so you have to enable oem for fastboot to work, it should be somewhere in the developer settings. otherwise i wouldn't know
jimandroidnerd said:
Are you on stock rom? if so you have to enable oem for fastboot to work, it should be somewhere in the developer settings. otherwise i wouldn't know
Click to expand...
Click to collapse
Im on b130 kiw l21 my phone shows wrong data under about phone and i cant apply a update to go back to stock from the dload file it simply instant says syatem update failed. I just want to revert back to stock then update to b140 and then to B330 emui 4.0 but i cant because the dload keeps failing
Demian3112 said:
Im on b130 kiw l21 my phone shows wrong data under about phone and i cant apply a update to go back to stock from the dload file it simply instant says syatem update failed. I just want to revert back to stock then update to b140 and then to B330 emui 4.0 but i cant because the dload keeps failing
Click to expand...
Click to collapse
you say you are on b130 but than you say you wanna go to stock rom? I dont really understand what you are telling me here
jimandroidnerd said:
you say you are on b130 but than you say you wanna go to stock rom? I dont really understand what you are telling me here
Click to expand...
Click to collapse
My device got bricked B330. So i had to reflash some stuff and ended up with false info under the section About Phone i had the same issue as him So i followed that instructions but i couldnt flash the Cust.img in the recovery (twrp) it gives me the error that i have as title. Without flashing the cust.img i cant use a revert package through dload since my Phone shows other information then the update package (denies to do the update instant) . My question how can i fix the error "File bigger then target device" so i can flash the Cust.img since fast boot doesnt work (error remote: command not allowed recovery) and twrp is my only option..
Instructions i followed to get back to stock.
Flash Boot.img, system.img, cust.img through twrp > flash stock recovery > Apply UK back to stock through dload
I cant flash cust.img so step 1 fails and i cant do the rest.
Anyone a idea why i cant flash this file through TWRP and fastboot? This is littery my last hope to get back to stock ;/
Demian3112 said:
Anyone a idea why i cant flash this file through TWRP and fastboot? This is littery my last hope to get back to stock ;/
Click to expand...
Click to collapse
I could give you my twrp backup? Maybe that will help
jimandroidnerd said:
I could give you my twrp backup? Maybe that will help
Click to expand...
Click to collapse
I mean i should be able to flash cust.img through fastboot right?
Demian3112 said:
I mean i should be able to flash cust.img through fastboot right?
Click to expand...
Click to collapse
No, i meant i can give u my twrp backup so you van restore it from twrp. Do you want it or not?
jimandroidnerd said:
No, i meant i can give u my twrp backup so you van restore it from twrp. Do you want it or not?
Click to expand...
Click to collapse
Nvm thanx! Fixed it im an idiot.
I was so bussy almost 2 days with this. I have no experience (14old) and i simply went bussy so much with it that i started looking over the simple things. I fixed it now it left me with a damm headache thnx anyways, i learned something again!
jimandroidnerd said:
No, i meant i can give u my twrp backup so you van restore it from twrp. Do you want it or not?
Click to expand...
Click to collapse
Oke i got a bit too excited. The fingerprint option is gone like it never has been there. Honor boot logo has a red H, i get the b140 update but cant apply it same issue with dload. Would you mind sharig your TWRP update? If it is possible for B330 and B130 Thx!
Demian3112 said:
Oke i got a bit too excited. The fingerprint option is gone like it never has been there. Honor boot logo has a red H, i get the b140 update but cant apply it same issue with dload. Would you mind sharig your TWRP update? If it is possible for B330 and B130 Thx!
Click to expand...
Click to collapse
You need to use kiwi_twrp_5-14_recovery.img
and the backup needs to contain all these partitions
boot.emmc.win
cust.ext4.win"
erecovery.emmc.win"
firmware.info"
firmware.vfat.win"
misc.emmc.win"
persist.ext4.win
system.ext4.win000
system.ext4.win001
restore those and you'll be back in business
This rom also contains the /cust partition for b130
http://forum.xda-developers.com/honor-5x/development/custom-rom-starter-template-honor-5x-t3328809
clsA said:
You need to use kiwi_twrp_5-14_recovery.img
and the backup needs to contain all these partitions
boot.emmc.win
cust.ext4.win"
erecovery.emmc.win"
firmware.info"
firmware.vfat.win"
misc.emmc.win"
persist.ext4.win
system.ext4.win000
system.ext4.win001
restore those and you'll be back in business
This rom also contains the /cust partition for b130
http://forum.xda-developers.com/honor-5x/development/custom-rom-starter-template-honor-5x-t3328809
Click to expand...
Click to collapse
This is what i got.. http://prntscr.com/brv0ay the Repository doesnt contain this files aswell any idea? Is it possible to flash for example a full Kiw L22 rom and then use a revert package for L21 through Dload?
Oke what i did:
Wipe
Apply Cust partition with terminal
Apply backup/restore
flash stock recovery
Boots same issue, I just need the dload to get to work so i can flash the recovery pack. But it stays at 0 percent even after 15 mins.
What i found out is that i dont have the stock firmware (Dont have fingerprint and stuff, device doenst show as KIW L21), so i doenst do a ota update and local update ofcourse. I need a TWRP backup with firmware included. What im trying now is installing L21 MIDDLE-EAST firmware and then try to use a revert package for L21 through OTA.
Arobase40 said:
Well, I'm not sure this is a good idea as it took me 11 days to upgrade from B140 (Lollipop) to B330 (Marshmallow) and only a few minutes to brick my Honor 5x L21 using a backup from kiwi_twrp_5-14_recovery.img when I wanted to revert back to B140... ^^
At boot time after the restore, I have an animated red H letter from the Honor Logo and impossible to get back to the welcome screen nor to any other screen so I don't have access to TWRP anymore...
We really need to have access to the official downgrade firmware from Honor !!!
Click to expand...
Click to collapse
Same issue.. I get red H honor logo.. cant apply a single update through ota/dload and finger print is gone.. I can do everything, installing apps and stuff but i cant revert back to full stock.
clsA said:
You need to use kiwi_twrp_5-14_recovery.img
and the backup needs to contain all these partitions
boot.emmc.win
cust.ext4.win"
erecovery.emmc.win"
firmware.info"
firmware.vfat.win"
misc.emmc.win"
persist.ext4.win
system.ext4.win000
system.ext4.win001
restore those and you'll be back in business
This rom also contains the /cust partition for b130
http://forum.xda-developers.com/honor-5x/development/custom-rom-starter-template-honor-5x-t3328809
Click to expand...
Click to collapse
Could you link me the firmware.vfat and misc.emmc and persist.ext. Is there a way to make the update.app a flashable zip? Anyways any idea what i still could do?
Anyways what would you recommend me to go back to stock right now? Is it cuz my system partition is messed up? How to fix? thx anyways!
Arobase40 said:
As I said it is NOT really a good idea to use a TWRP backup to revert back from Marshmallow to Lollipop as it will brick your device !
I also said : ask your local Honor technical support for an official revert back firmware as your whole system is obviously messed up.
I don't know how you upgraded your smartphone but better downgrade to Lollipop first and try to upgrade again to MM a "proper way"...
Click to expand...
Click to collapse
]
Thats the point.. I simply cant. Phone doenst accept dload updates instant says "System Failed", most near honor technical support is 98 km out.
Ok anyways does anyone have a B330 full stock backup?
Arobase40 said:
I didn't say you had to move yourself to a technical support but place a phone call or mail them. You should find their phone number or their email address from your the Honor Website.
I'll do it myself by tomorrow...
Click to expand...
Click to collapse
I fixed it. Go to hi honor and search for honor 5x firmware, download it unpack it put the update.app on dload on microsd make sure you flashed stock recovery through fastboot hold power + volume down + volume up until it vibrates and done. I couldnt install any dload file on XDA the error "system failed" means the update is not for your device. The one on hihonor was the only one that worked for me ive been bussy 3 days its worth trying. I can link/upload you the download and instructions if you want to but ill do it tomorrow.
jimandroidnerd said:
No, i meant i can give u my twrp backup so you van restore it from twrp. Do you want it or not?
Click to expand...
Click to collapse
Hello i have the same problem could you please give me your backup so i can try it?
Same issue
So i got my Honor 5x yesterday and thought i would install a custom rom on it since people are recommending it.
Its my first time so i followed guids. I installed adb and fastboot and managed to get TWRP 3.1.1-0- on it.
Btw, i have a Honor 5x
Model KIW-L21
I am able to get into the recovery TWRP. I made a backup and saved the folder "BACKUPS" on my PC.
I then downloaded LineageOS from their Homepage: download (DOT) lineageos (DOT) org/kiwi
I downloaded the latest version. I also downloaded Gapps from Opengapps.org. I downloaded ARM64 version 7.1
I wiped my phone completely and copied the two zip files on the phone. I went to "install", selected LineageOS zip and added Gapps. i swiped right to install and the installation stopped with ERROR 7
I tried to download older versions of LineageOS but the same thing happens. ERROR 7
I then downloaded an olderversion of CM13 with GAPPS 6.0. Again, Error 7
I downloaded XENON HD ZIP from here: mirrors (DOT) c0urier (DOT) net/android/teamhorizon/N/Official/kiwi/
Error 7
I downloaded ASOP from here: downloads (DOT) aospextended (DOT) com/kiwi/
Error 7
I looked up Error 7 and its says it is a security check that figures out, that the ROM is not compatible with the Phone. Some guy told me that this happens a lot and that i should use another rom.
I looked for a solution on youtube and found a guy who said that i can do the following:
Unzip the ROM on your pc, go into \META-INF\com\google\android and open the updater script with Notepad++. Delete the first two lines that says asserts, save, close it again and zip the whole package again.
I copied the new, modifiled rom on the phone with the GAPPS and installed it. This time ERROR 7 didnt appear. GAPPS were also installed. When i boot my device i get in the loading screen from Lineage for about 5-10 minutes. After that, it just restarts and restarts and restarts. I can't get out of the boot loop since I can't remove my battery. when I press VOL UP I come back the TWRP and can wipe the phone again.
I tried that with 3 different LineageOS ROMS and one XENON HD ROM.
I also get into a boot loop where my phone just restarts and restarts and restarts.
I tried to get my backup working so I copied the folder "BACKUPS" on my phone and went to restore in TWRP. but... i found nothing there?
I am super frustrated since my phone is basically dead and I have no idea what I can do.
BTW, every site calls my phone "KIWI" but my model number is "KIW-L21"
As mentioned in Los 14.1 thread (& should be mentioned in all threads), "ROM Firmware Required: No VoLTE firmware! (B360, B370, ...)". You must downgrade your stock rom to B350 at least, before try playing with custom roms (only for kiwi, of course).
Non VoLTE Marshmallow firmware is required. As said by @mauam get in there and have the same process repeated
Thank you for your replies.
The only thing i could find was this thread: https://forum.xda-developers.com/ho...-lineageos-14-1-pre-official-kiw-l24-t3528488
It said there:
Important note:
Stock Firmware B360 and B370 are known to cause bootloops!
(Generally: if your stock ROM supports VoLTE it is likely that it is also affected!)
All others might work, please do not ask in here how to up- or downgrade!
It doesnt mentioned what that mean and even said "dont ask in here how to downgrade"
I have no idea what all that means. I dont know what stock firmware is, what version i have or how i could downgrade it. I can access TWRP, but still have no OS on it.
edit: this is the full log:
Updateing partition details...
... done
Full SElinux support is present.
MTP Enabled
Installing zip file '/sdcard/lineage-14.1-20170816-nightly-kiwi-signed.zip'
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
Comparing TZ version TZ.BF.3.0.C3-00025 to TZ.BF.3.0.C3-00022") =="1"
assert failed: kiwi.verify_trustzone("TZ.BF.3.0.C3-00025") == "1"
Updater process ended with ERROR: 7
Error installing zip file '/sdcard/lineage-14.1-20170816-nightly-kiwi-signed.zip'
Updating parition details...
...done
Click to expand...
Click to collapse
When i edit the zip file and delete the first two line of the updater scripter with notepad++ as i mentioned above, i can install these ROMS, but they wont boot / are in an infinite Bootloop
So on which firmware you were before flashing Los
PalakMi said:
So on which firmware you were before flashing Los
Click to expand...
Click to collapse
how do i check that?
I was able to get the backup running. So I am back to EMUI 3.1 / Android 5.1.1. Here is a screenshot from my phones status: i.imgur (DOT) com/rCnuOpX.png
Activehannes said:
how do i check that?
I was able to get the backup running. So I am back to EMUI 3.1 / Android 5.1.1. Here is a screenshot from my phones status: i.imgur (DOT) com/rCnuOpX.png
Click to expand...
Click to collapse
Just go to about phone
PalakMi said:
Just go to about phone
Click to expand...
Click to collapse
I did and posted a screenshot above
is it Build number "KIW-L21C432B160"
so... B160?
update:
I just downloaded this:
NEW KIW-L21 C432B350 - D003
from this thread: https://forum.xda-developers.com/honor-5x/how-to/repository-honor-5x-file-depot-t3328288
I was going to unzip it, copy the "dload" folder on my device, go the the updater and run the "local update package".
And then my phone will be on android 6.0 with b350, right?
The next step would be to start the phone in the recovery TWRP, go to wipe --> advance wipe and select everything (system, data, cache etc). after that i copy the latest Kiwi lineage OS zip rom on my device with the GAPPS 7.1 and try to install them again via TWRP 3.1.1?
Is this right?
I just wanna ask because my phone doesnt work for 2 days now and i dont want to brick it completely. cant afford a new one
Update to marshmallow first (any update before b360, like b320)
Update to marshmallow first (any update before b360, like b320)
Click to expand...
Click to collapse
when i go to the "updater" and and search for a new update it says that there is none. My phone is still on EMUI 3.1/android 5.1.1/b160. Do i need to manually download another firmware? so a B320 patch first (with the dload folder and local upgrade package) and after that the B350 upgrade?
Try manual ota here or search here. If no luck use XDA search bar &/or Google. Good luck.
Activehannes said:
when i go to the "updater" and and search for a new update it says that there is none. My phone is still on EMUI 3.1/android 5.1.1/b160. Do i need to manually download another firmware? so a B320 patch first (with the dload folder and local upgrade package) and after that the B350 upgrade?
Click to expand...
Click to collapse
Try any marshmallow update before b360.
If it didn't work, try the above post.
so i followed this guide: https://forum.xda-developers.com/honor-5x/how-to/manual-ota-update-guide-update-app-t3445976
he describes 2 methods.
I wasnt able to find a B320 update for KIW L21, only for KIW L22 which is the Indian device I think. so I downloaded KIW L21 B330 Denmark. I unzipped the file and copied the dload folder on my device,
i went to update --> menu --> local update --> UPDATE.APP
my phone restarts into TWRP and does nothing. I know that I need the EMUI stock recovery, not TWRP, but no matter how many times I do this, it always restarts into TWRP.
i also tried the other method.
I shut down my phone, press VOLUP and VOLDOWN and Power. The phone goes into the the "honor" loading screen and restats after a few seconds. and restart again and again. If i release the power button before it restarts, it just boots into the system. If I shut it down and hold VOLUP and Power it boots into TWRP. I tried so many different compinations, but i cant get my phone into the EMUI Stock recovery. I read in the other XDA thread, that i need to unlock my phone. So i tried that. i went adb reboot bootloader --> fastboot oem relock CODE. the console did its magic but my phone is still unlocked. And now i cant repeat that command. when i go again into the bootloader and type fastboot oem relock it says:
PS C:\adb> adb devices
List of devices attached
W6HDU17610003396 device
PS C:\adb> adb reboot bootloader
PS C:\adb> fastboot oem relock 1524319619165116
...
FAILED (remote: Image verify failed,relock fail)
finished. total time: 1.810s
PS C:\adb> adb devices
List of devices attached
PS C:\adb>
Click to expand...
Click to collapse
So, i still have b160 / android 5.1 on my phone :/ can anyone figure out what went wrong?
Activehannes said:
so i followed this guide: https://forum.xda-developers.com/honor-5x/how-to/manual-ota-update-guide-update-app-t3445976
he describes 2 methods.
I wasnt able to find a B320 update for KIW L21, only for KIW L22 which is the Indian device I think. so I downloaded KIW L21 B330 Denmark. I unzipped the file and copied the dload folder on my device,
i went to update --> menu --> local update --> UPDATE.APP
my phone restarts into TWRP and does nothing. I know that I need the EMUI stock recovery, not TWRP, but no matter how many times I do this, it always restarts into TWRP.
i also tried the other method.
I shut down my phone, press VOLUP and VOLDOWN and Power. The phone goes into the the "honor" loading screen and restats after a few seconds. and restart again and again. If i release the power button before it restarts, it just boots into the system. If I shut it down and hold VOLUP and Power it boots into TWRP. I tried so many different compinations, but i cant get my phone into the EMUI Stock recovery. I read in the other XDA thread, that i need to unlock my phone. So i tried that. i went adb reboot bootloader --> fastboot oem relock CODE. the console did its magic but my phone is still unlocked. And now i cant repeat that command. when i go again into the bootloader and type fastboot oem relock it says:
So, i still have b160 / android 5.1 on my phone :/ can anyone figure out what went wrong?
Click to expand...
Click to collapse
May be i can help u with this .
Hello.
My honor 9 (stf al00) cant boot. It stuck on huawei erecovery.
I've tried hard reset, wipe cache & wipe data but still stuck.
And also I dont have the driver.
Can anyone please help me.
What happened before ?
You were on nougat or oreo ? which build ?
Which region ? C00 ? or rebranded C432 or else ?
oslo83 said:
What happened before ?
You were on nougat or oreo ? which build ?
Which region ? C00 ? or rebranded C432 or else ?
Click to expand...
Click to collapse
I dont know what happend, give my brother use for awhile, suddenly he return to me with this problem.
its on nougat. sorry what build, i dont know.
Region China?. i dont know about the C00 or rebranded and c432 that you said. really have no idea.
OK.
So your Honor9 is STF-AL00 and was on nougat.
But:
-you don't know on which firmware region it was and you don't know if it was rebranded to STF-L09
-i guess your brother could also have updated it to oreo, or rebranded it before bricking it...
If you did not have any chinese app stock installed like QQ, Weibo or Tancent News then you could be probably on region C432 (or C10 or C185) ;
If so use this with an exfat external micro sdcard or usb-otg EXFAT formatted:
https://forum.xda-developers.com/honor-9/development/firmware-huawei-honor-9-stf-l09-stock-t3696892
First try with C432B130, read the instructions inside, do it, then report.
thanks.. i will try it tonight,
i've done try update with sd card before, but not with those file inside the link you give.
and also not with EXFAT fromat sd card, but it said Software Update Failed.
i will try this and update here again..
thanks
honor 9 stf-al00
phone unlocked and frp unlock
bricked the phone installing oreo.
twrp is installed but all the roms i flash i get error 9.
dload with update.app get stuck at 5% and after "system update failed"
i also extracted update.app and i can flashed boot,kernel and recovery but i get an error flashing system
At this point i just want the phone running anything but everything that i do doenst work
ruigarcia said:
honor 9 stf-al00
phone unlocked and frp unlock
bricked the phone installing oreo.
twrp is installed but all the roms i flash i get error 9.
dload with update.app get stuck at 5% and after "system update failed"
i also extracted update.app and i can flashed boot,kernel and recovery but i get an error flashing system
At this point i just want the phone running anything but everything that i do doenst work
Click to expand...
Click to collapse
Are you with nougat or oreo partitionni'g scheme ?-> are you actually booting on a nougat twrp or on a oreo twrp ?
Which region your phone were on on ?
original chinese C00 ?
or rebranded C432, C10 or else?[/QUOTE]
oslo83 said:
Are you with nougat or oreo partitionni'g scheme ?-> are you actually booting on a nougat twrp or on a oreo twrp ?
Which region your phone were on on ?
original chinese C00 ?
or rebranded C432, C10 or else?
Click to expand...
Click to collapse
[/QUOTE]
right now with oreo partitions, never rebranded the phone, and i was running update b362 so i assume im still on c00, otherwise i dont think i would have worked.
twrp is 3.1.1.1 open kirin edition
right now with oreo partitions, never rebranded the phone, and i was running update b362 so i assume im still on c00, otherwise i dont think i would have worked.
twrp is 3.1.1.1 open kirin edition[/QUOTE]
OK so, the facts :
1) B362 firmware are mostly european (C432) or russian (C10) and could be japanese (C635).
So your phone was previously rebranded from chinese to one of these region.
It's not a problem if not done wrong, maybe your case...
2)'twrp 3.1.1.1 open kirin edition' is a custom recovery for NOUGAT and not for oreo.
And then some more questions:
-Can you boot your phone to normal mode ?
-You were on nougat before brick ?
-You were one oreo B362 before brick ?
-The brick happens after it upgraded from mogat to oreo B362 ? If so, how did you update ? normal OTA ? forced OTA with android app Firmware Finder ?
i can only boot the phone in recovery mode (twrp and erecovery) and fastboot
i installed b360 through forced ota and then when i was in the system i updated again to b362 throught settings\system update
i was on oreo b362 before brick, and i remember now that my navigations buttons were not working so i flashed a custom kernel to fix it, but
that prevented me from booting to the system again. (Proto Kernel)
edit: used that tool you gave me and i managed to flash STF-L09_C432B360.
ruigarcia said:
i installed b360 through forced ota and then when i was in the system i updated again to b362 throught settings\system update
Click to expand...
Click to collapse
So your phone was correctly rebranded in the past and we can deduce you are now on region C432 or C10.
ruigarcia said:
i was on oreo b362 before brick, and i remember now that my navigations buttons were not working so i flashed a custom kernel to fix it, but
that prevented me from booting to the system again. (Proto Kernel)
Click to expand...
Click to collapse
You flashed a custom B360 kernel over your B362 : It was why your phone bootlooped just after !!
Flashing a stock B362 kernel would have solve the bootloop.
ruigarcia said:
i also extracted update.app and i can flashed boot,kernel and recovery but i get an error flashing system
Click to expand...
Click to collapse
You said you had flashed boot, kernel and recovery from an update.app.... Which build number and region this update.app was from ?
You could flash back B362 stock boot, kernel and recovery and it should boot if you did not messed something else...
So, the best for you will be to:
1) use HuRUpdater to flash C432B360 or C10B360 firmware (depending of your actual phone region)
2)then flash the B360 kernel fix
3)then update via OTA or huRUpdater.
oslo83 said:
So your phone was correctly rebranded in the past and we can deduce you are now on region C432 or C10.
You flashed a custom B360 kernel over your B362 : It was why your phone bootlooped just after !!
Flashing a stock B362 kernel would have solve the bootloop.
You said you had flashed boot, kernel and recovery from an update.app.... Which build number and region this update.app was from ?
You could flash back B362 stock boot, kernel and recovery and it should boot if you did not messed something else...
So, the best for you will be to:
1) use HuRUpdater to flash C432B360 or C10B360 firmware (depending of your actual phone region)
2)then flash the B360 kernel fix
3)then update via OTA or huRUpdater.
Click to expand...
Click to collapse
i flashed many update.app, i messed up with that, cant remember the last one.
just flashed twrp for oreo now, went to terminal and i can see "ro.hw.vendor: (hw)
does this tell me my phone region?
with this twrp for oreo i also get another error when flashing a rom zip "failed to mount "\system" (permission denied)
Stop messing with random dload folder and update.app ; From what i seen only special one called 'service repair' will work.
No. It does not.
Stop messing trying to flash random zip when on twrp ; From what i heard only special one called 'FullOTA-MF-PV' will work this way with twrp.
Be bold and try HuRUpdater witj C432B360 following my latter post.
oslo83 said:
Stop messing with random dload folder and update.app ; From what i seen only special one called 'service repair' will work.
No. It does not.
Stop messing trying to flash random zip when on twrp ; From what i heard only special one called 'FullOTA-MF-PV' will work this way with twrp.
Be bold and try HuRUpdater witj C432B360 following my latter post.
Click to expand...
Click to collapse
i used HuRUpdater and worked. thank you! cant update to b362 through settings tho
C432 is maybe the wrong region if you don't get ota update notification to b362/b364 when checking for update in settings :
1) What's your build number version on Settings/System/about ?
2) What's the country shown when you dial**#*#2846579#*#**- on the dial pad, then go to 'Network Information Query' and then to 'Vendor Country Info' ?
---------- Post added at 19:44 ---------- Previous post was at 19:42 ----------
Dial**#*#2846579#*#*
---------- Post added at 19:46 ---------- Previous post was at 19:44 ----------
sorry typos.
So dial:
Code:
*#*#2846579#*#*
im so sorry, i cant access my pc right now.
i will update soon i can get access to my pc.
oslo83 said:
C432 is maybe the wrong region if you don't get ota update notification to b362/b364 when checking for update in settings :
1) What's your build number version on Settings/System/about ?
2) What's the country shown when you dial**#*#2846579#*#**- on the dial pad, then go to 'Network Information Query' and then to 'Vendor Country Info' ?
---------- Post added at 19:44 ---------- Previous post was at 19:42 ----------
Dial**#*#2846579#*#*
---------- Post added at 19:46 ---------- Previous post was at 19:44 ----------
sorry typos.
So dial:
Code:
*#*#2846579#*#*
Click to expand...
Click to collapse
vendor:hw
country:eu
build number:stf-l09 8.0.0.360(c432)~
reflashed b360 and now i get update to b364 on settings. still no capacity buttons..
So, you're fine on C432.
Just flash the B360 kernel fix while you're still on B360 https://forum.xda-developers.com/showpost.php?p=75772700 ;
This will fix your buttons.
You can then do a normal update via settings
ok so i tried to update using vol up + vol down + power button, again it said software install failed
inside those rar file got 2 file, 1 is UPDATE.APP which is 4gb++ and another one is update_STF-L09_hw_eu.app size around 1.4gb.
try update with 4gb file, appear 5% loading and then appear software install failed, same with 1.4gb file...
the only option i got is reboot system now when the error come out..
already did wipe cache & data before i do the update..
any idea? am i doing wrong step?
I have the same problem...When the installation begins, it stops at 5%
My phone is turned off. I tried to install recovery but got nothing
any idea please
I bricked my huawei mate 10. Please help. TIA
me 2
You have to give more information if you want us to provide a viable (if there are any) solution. What firmware were you on, what firmware were you trying to install?
i was trying to install xposed
bootloop
me too please help
I'd really appreciate your help
I have a Huawei Mate 10 on Android Oreo 8.0 rooted and bootloader unlocked
Lock state info:
FB LockState: LOCKED
USER LockState: UNLOCKED
Current build number:
System 8.0.0.38(0310)
Product model:
ALP-L29
I tried installing Xposed Framework ... after installation got in a bootloop
eRecovery doesn't work
I don't have TWRP
can only enter fastboot
the device has an SD card slot but I'm confused because some say upgrading or formatting it works and some say it doesn't .
I just want the device to boot ... I don't care about the data
please kindly help
thanks in advance
hero3210 said:
me too please help
I'd really appreciate your help
I have a Huawei Mate 10 on Android Oreo 8.0 rooted and bootloader unlocked
Lock state info:
FB LockState: LOCKED
USER LockState: UNLOCKED
Current build number:
System 8.0.0.38(0310)
Product model:
ALP-L29
I tried installing Xposed Framework ... after installation got in a bootloop
eRecovery doesn't work
I don't have TWRP
can only enter fastboot
the device has an SD card slot but I'm confused because some say upgrading or formatting it works and some say it doesn't .
I just want the device to boot ... I don't care about the data
please kindly help
thanks in advance
Click to expand...
Click to collapse
More info:
fastboot oem get-product-model
...
(bootloader) ALP-L29
fastboot getvar vendorcountry
vendorcountry: hw/meafnaf
fastboot oem get-build-number
...
(bootloader) :System 8.0.0.38(0310)
fastboot getvar rescue_enter_recovery
getvar:rescue_enter_recovery FAILED (remote: FAIL:need all image flashed!)
fastboot oem oeminforead-SYSTEM_VERSION
...
(bootloader) :ALP-L29 8.0.0.128(C185)
please inform me of how to flash update.zip because I get an error
or place in in SD card because UPDATE.APP is more than 4GB ..
I think for the experienced, my problems are fairly easy to fix so please help ... I appreciate any suggestion. Thank you.
royhanks3 said:
You have to give more information if you want us to provide a viable (if there are any) solution. What firmware were you on, what firmware were you trying to install?
Click to expand...
Click to collapse
ALP-L29 bootloader unlocked.
Rooted
I am just struck in bootloop.
Erecovery doest help. I have the firmware(update.app) just tell me how to flash the stock rom i.e (update.app)
Thanks in advance.
Please help
Karthik1898 said:
ALP-L29 bootloader unlocked.
Rooted
I am just struck in bootloop.
Erecovery doest help. I have the firmware(update.app) just tell me how to flash the stock rom i.e (update.app)
Thanks in advance.
Please help
Click to expand...
Click to collapse
You need to unpack the update.app with Huawei Update Extractor and get the system.img.Then flash it with fastboot and check if it boots.
Pretoriano80 said:
You need to unpack the update.app with Huawei Update Extractor and get the system.img.Then flash it with fastboot and check if it boots.
Click to expand...
Click to collapse
How can this be done?
Tumpster said:
How can this be done?
Click to expand...
Click to collapse
I've just told you in my previous post, lol.
Use this guide - > https://forum.xda-developers.com/mate-10/how-to/guide-extracting-stock-firmware-files-t3756733 <- to extract the system.img and then flash the image with this command : fastboot flash system system.img
Then reboot the with "fastboot reboot" command and hope that your system boots.
I bricked my Huawei Mate 10 too
Please help.. I also bricked my Huawei Mate 10 ALP-L29C636...
I installed the EMUI 9.0 on my device using the HWOTA8_Mate10 method which was successful. The EMUI 9.0 ROM was from FirmwareFinder: ROM version ALP-L29C636E2R1P8B108-log (9.0.0.108). I didn't have any issues at all but since Huawei Mate 10's EMUI 9.0 is still in Beta, I decided to switch back to the stable EMUI 8.0.
Here's where the problem started... Since I want to downgrade, I went ahead and downloaded the 3 needed files (update.zip, update_all_hw, update_data_public) from FirmwareFinder: ROM version ALP-L29C636B143 (8.0.0.143). I fired up HWOTA8_Mate10 and started the installation process. The first step was to boot to fast boot and then plug the device, after that, the software asked me to unplug the device and press volume+ and power button but the device won't boot to recovery anymore. The device is now stuck at "Your device is booting now..." I tried rebooting the device but it won't work. Tried to go to eRevovery to wipe cache/factory reset but it will go back to "Your device is booting now..." page. I tried reinstalling the recovery.img via fastboot and tried to boot to recovery mode again but it won't work anymore. I believe my device is now soft bricked . I can still boot to fastboot, I even tried fastboot flash system system.img which was successful but the device still won't boot. Please help how to recover my device. I think I went too far and now I don't know how to fix this issue.
Carnage! said:
Please help.. I also bricked my Huawei Mate 10 ALP-L29C636...
I installed the EMUI 9.0 on my device using the HWOTA8_Mate10 method which was successful. The EMUI 9.0 ROM was from FirmwareFinder: ROM version ALP-L29C636E2R1P8B108-log (9.0.0.108). I didn't have any issues at all but since Huawei Mate 10's EMUI 9.0 is still in Beta, I decided to switch back to the stable EMUI 8.0.
Here's where the problem started... Since I want to downgrade, I went ahead and downloaded the 3 needed files (update.zip, update_all_hw, update_data_public) from FirmwareFinder: ROM version ALP-L29C636B143 (8.0.0.143). I fired up HWOTA8_Mate10 and started the installation process. The first step was to boot to fast boot and then plug the device, after that, the software asked me to unplug the device and press volume+ and power button but the device won't boot to recovery anymore. The device is now stuck at "Your device is booting now..." I tried rebooting the device but it won't work. Tried to go to eRevovery to wipe cache/factory reset but it will go back to "Your device is booting now..." page. I tried reinstalling the recovery.img via fastboot and tried to boot to recovery mode again but it won't work anymore. I believe my device is now soft bricked . I can still boot to fastboot, I even tried fastboot flash system system.img which was successful but the device still won't boot. Please help how to recover my device. I think I went too far and now I don't know how to fix this issue.
Click to expand...
Click to collapse
As i know you cannot downgrade from pie to oreo try to flash back the pie files as u did before with HWOTA8 and see if the devise boot
Carnage! said:
Please help.. I also bricked my Huawei Mate 10 ALP-L29C636...
I installed the EMUI 9.0 on my device using the HWOTA8_Mate10 method which was successful. The EMUI 9.0 ROM was from FirmwareFinder: ROM version ALP-L29C636E2R1P8B108-log (9.0.0.108). I didn't have any issues at all but since Huawei Mate 10's EMUI 9.0 is still in Beta, I decided to switch back to the stable EMUI 8.0.
Here's where the problem started... Since I want to downgrade, I went ahead and downloaded the 3 needed files (update.zip, update_all_hw, update_data_public) from FirmwareFinder: ROM version ALP-L29C636B143 (8.0.0.143). I fired up HWOTA8_Mate10 and started the installation process. The first step was to boot to fast boot and then plug the device, after that, the software asked me to unplug the device and press volume+ and power button but the device won't boot to recovery anymore. The device is now stuck at "Your device is booting now..." I tried rebooting the device but it won't work. Tried to go to eRevovery to wipe cache/factory reset but it will go back to "Your device is booting now..." page. I tried reinstalling the recovery.img via fastboot and tried to boot to recovery mode again but it won't work anymore. I believe my device is now soft bricked . I can still boot to fastboot, I even tried fastboot flash system system.img which was successful but the device still won't boot. Please help how to recover my device. I think I went too far and now I don't know how to fix this issue.
Click to expand...
Click to collapse
Flash back stock pie kernel. Hwota flashes recovery and kernel (and ramdisk which fails because there is no ramdisk partition in pie). If kernel doesn't work because its corrupt or wrong (pie kernel is 4.9 while Oreo use 4.4) your device can't boot recovery or boot to system.
You can downgrade using TWRP but you'd have to do it manually.
Antidote03 said:
As i know you cannot downgrade from pie to oreo try to flash back the pie files as u did before with HWOTA8 and see if the devise boot
Click to expand...
Click to collapse
Thanks for the suggestion. I tried flashing back the pie files using HWOTA8 but the software requires you to boot to recovery in order for the installation to continue but the device won't boot to recovery, it's just stuck on device is booting now screen.
---------- Post added at 11:42 AM ---------- Previous post was at 11:39 AM ----------
ante0 said:
Flash back stock pie kernel. Hwota flashes recovery and kernel (and ramdisk which fails because there is no ramdisk partition in pie). If kernel doesn't work because its corrupt or wrong (pie kernel is 4.9 while Oreo use 4.4) your device can't boot recovery or boot to system.
You can downgrade using TWRP but you'd have to do it manually.
Click to expand...
Click to collapse
Thanks for the explanation. At least I have an idea now what caused the issue . If it's fine do you have the steps or link which provides steps how to downgrade using TWRP?
Carnage! said:
Thanks for the explanation. At least I have an idea now what caused the issue . If it's fine do you have the steps or link which provides steps how to downgrade using TWRP?
Click to expand...
Click to collapse
Look here - > https://forum.xda-developers.com/mate-10/how-to/how-people-bricked-phone-rebranding-ota-t3797555 <- use the Huawei Update Extractor tool to get the image files than flash with fastboot.
kernel = fastboot flash kernel kernel.img
system = fastboot flash system system.img
recovery = fastboot flash recovery_ramdisk recovery.img
Obviously, replace image name with the ones you are using.
For downgrading, download this tool - > https://mega.nz/#!oxkQWApD!-PtLtrekX3DS-iglnr7xpdB1285dF1nZSiOSHyZsqKA <- unpack it on your PC, launch Flash.bat and follow the On Screen instructions .
Now you got it why you shouldn't spam threads? You get answers all over the forum, which is not nice.
Pretoriano80 said:
Look here - > https://forum.xda-developers.com/mate-10/how-to/how-people-bricked-phone-rebranding-ota-t3797555 <- use the Huawei Update Extractor tool to get the image files than flash with fastboot.
kernel = fastboot flash kernel kernel.img
system = fastboot flash system system.img
recovery = fastboot flash recovery_ramdisk recovery.img
Obviously, replace image name with the ones you are using.
For downgrading, download this tool - > https://mega.nz/#!oxkQWApD!-PtLtrekX3DS-iglnr7xpdB1285dF1nZSiOSHyZsqKA <- unpack it on your PC, launch Flash.bat and follow the On Screen instructions .
Now you got it why you shouldn't spam threads? You get answers all over the forum, which is not nice.
Click to expand...
Click to collapse
Thanks for the steps. I will try it later and will let you know. I really apologize for spamming since I panicked and I don't know where to get help. I will continue and reply to this thread only moving forward.
Carnage! said:
Thanks for the steps. I will try it later and will let you know. I really apologize for spamming since I panicked and I don't know where to get help. I will continue and reply to this thread only moving forward.
Click to expand...
Click to collapse
I would start with just flashing kernel. Flashing system can disable Oem unlock, which will result in frp lock in fastboot.
@Pretoriano80
Thx this has Fixed my Phone
In Huawei Service Center they are not able to fix the Firmwarefail *rofl*
ante0 said:
I would start with just flashing kernel. Flashing system can disable Oem unlock, which will result in frp lock in fastboot.
Click to expand...
Click to collapse
I think he already flashed system once! ?
ante0 said:
I would start with just flashing kernel. Flashing system can disable Oem unlock, which will result in frp lock in fastboot.
Click to expand...
Click to collapse
Got it. Thanks again for all the help!
Mate 10. So, I tried to install the latest EMUI version using HuRUpdater - bad idea. Now, my phone will not boot. I can enter EMUI Recovery Mode but when I try to receive download package, it says it can't be retrieved. I can also enter Fastboot Mode but the problem with that is that under Device Manager, it only gets recognized as, "Android Bootloader Interface."
Please, any help would be greatly appreciated.
edit: So, fastboot DOES work. What files from what version do I flash to return to stock recovery? I don't even know if Pie was actually written to the device or not before the device rebooted and wouldn't boot.
edit again: I have just successfully installed TWRP via fastboot but it hangs at startup screen - is this because it's not compatible with Pi?
So I've tried flashing ramdisk_recovery.img, kernel.img and system.img from the Pi version but I still can't factory reset the phone. It boots back to the white screen with the android dude and says, "Please update system again."
Any help would be appreciated...
Using Multi-Tool, it detects my device in Fastboot mode as still 8.0.0.143. So, I'm trying to flash System, Ramdisk, Cust, Recovery_Ramdisk and Userdata......all succeed, except one - Ramdisk.img. When I manually try to flash Ramdisk.img in command prompt, it also fails, "FAILED (remote: partition length get error)". In Multi-tool, the error is, "the size or path does not match the file system markup."
Please, does anyone have any other suggestions? I've been at this for nearly 12 hours straight.
I assume u have unlocked bootloader and frb unlocked too if both yes u can search in xda for zip file beta downy 0.4
It will help you to downgrade emui 9 to. Emui 8
If u have unlocked bootloader only I guess u need funky huawei to restore ur devise
I hope I did helped u
Thanks for the reply.
My bootloader is unlocked but how do I know if I have unlocked FRP?
And downy tool requires ADB but I can only access Fastboot.
edit: I just checked and my FRP is also unlocked. What now?
Tried Funky Huawei just now, no go. Still get package can't be received error in ERecovery after following all of the instructions. Have emailed them as that's what they suggest doing if it didn't work.
Not sure what else to try to be honest. How the hell does updating my phone from 8.0.0.143 to 9.0.0.159 with HuRUpdate brick my phone? Ffs.
essen212 said:
Tried Funky Huawei just now, no go. Still get package can't be received error in ERecovery after following all of the instructions. Have emailed them as that's what they suggest doing if it didn't work.
Not sure what else to try to be honest. How the hell does updating my phone from 8.0.0.143 to 9.0.0.159 with HuRUpdate brick my phone? Ffs.
Click to expand...
Click to collapse
Well, it happened because HuRUpdater it's not supported on EMUI 9.0.
Ramdisk fails to flash because even if in fastboot your device is showing as 8.0.0.143, it has EMUI 9's partition layout, so no more ramdisk partition.
Try flashing a firmware with the DLOAD method (search on androidhost.ru for a firmware designed for your device/cust).
Pretoriano80 said:
Well, it happened because HuRUpdater it's not supported on EMUI 9.0.
Ramdisk fails to flash because even if in fastboot your device is showing as 8.0.0.143, it has EMUI 9's partition layout, so no more ramdisk partition.
Try flashing a firmware with the DLOAD method (search on androidhost.ru for a firmware designed for your device/cust).
Click to expand...
Click to collapse
Damn. Well, that makes perfect sense. A question - do I flash the 9.0.0 version or 8.0.0.143 version?
essen212 said:
Damn. Well, that makes perfect sense. A question - do I flash the 9.0.0 version or 8.0.0.143 version?
Click to expand...
Click to collapse
Try with EMUI 9 first, then, if it fails, try Oreo. The most important part is finding a DLOAD firmware for your cust/region.
I've fixed it!
Funky emailed me back and I ended up using a different method on their site which worked like a charm. I couldn't recommend them enough.
Hi, good to hear you got it sorted! Would you mind sharing the details on what you had to do differently with FHC? I'm in the same boat here with a mate 10 pro that died on emui9 and I'm not sure if I should go the FHC way or not...
Thx - David