While in a call the screen, doesnt turn off properly and some keys get pressed most of the time calls get disconnected for me..
any one else facing this issue.
I have tried on wolfreaks rom as well as MIUI by trip and i face the above issue.
however it works fine with the stock ROM.
most of the custom roms use sensor libs compiled from source. You can still have the proximity sensor in custom roms. You have to just replace the libs with SE's but they are slow and buggy because of the compatibility layer.
Hi
I ordered Le Max 2 few days ago from Aliexpress(Trendresources LTD). However, I got concerned, after I read on xda and le forum about it problems with fp sensor. Could you tell me, is fingerprint sensor a software issue or unfortunately hardware and it can be fixed only by replacing dead sensor?
First of all, wait until your phone arrives and then we can talk.
Mine came with the fp sensor not working. I managed to make it work by flashing stock rom. First receive it and see how it is. Already the latest firmware 016s has huge improvements in fp recognition, so I believe it will improve even more.
When I first got my phone, I was so disappointed by the fp senor and not having Ota, but after updating to 5.8, all was solved.
Can't really complain. The phone is so fast and responsive.
Ok, thanks for help guys. I really appreciate that.
Fingerprint not working
I too receive the phone yesterday unable to register fingerprint, in the FP setup page it is not taking any input after touching the sensor. iam too confused requested for a replacement from the vendor, whether flashing stock rom (iam on 16s) will solve the issue.
please reply iam going nuts.
youtube link of mine trying to register FP setup is here
https://www.youtube.com/watch?v=qIFSvz9qSU4
ashok20205 said:
I too receive the phone yesterday unable to register fingerprint, in the FP setup page it is not taking any input after touching the sensor. iam too confused requested for a replacement from the vendor, whether flashing stock rom (iam on 16s) will solve the issue.
please reply iam going nuts.
youtube link of mine trying to register FP setup is here
Click to expand...
Click to collapse
As I have mentioned above, flash the stock ROM and you will see it will work.
Sent from my Le Max2 using XDA Labs
Thanks for the reply
valy_cta said:
As I have mentioned above, flash the stock ROM and you will see it will work.
Sent from my Le Max2 using XDA Labs
Click to expand...
Click to collapse
Thanks for the reply
Iam downloading 16S this now, i will flash after download.
after download, i have to rename the file to update.zip and goto recovery, select update right. please Correct me if iam wrong
i dont have anything to backup as it is a new mobile.
thank you.
ashok20205 said:
Thanks for the reply
Iam downloading 16S this now, i will flash after download.
after download, i have to rename the file to update.zip and goto recovery, select update right. please Correct me if iam wrong
i dont have anything to backup as it is a new mobile.
thank you.
Click to expand...
Click to collapse
you are correct.
flashed the stock rom. I have clicked the update.zip in file manager and selected update option, it took around 20 minutes and after that I tried to add FP but no use, same thing repeated, I think its a hardware issue. any way to diagnose the FP using any software or app?
ashok20205 said:
flashed the stock rom. I have clicked the update.zip in file manager and selected update option, it took around 20 minutes and after that I tried to add FP but no use, same thing repeated, I think its a hardware issue. any way to diagnose the FP using any software or app?
Click to expand...
Click to collapse
Reboot into recovery, select also clear data... and press Update and reflash. When you boot into system, before you put any fingerprints, select "Calibrate fingerprint sensor".
I tried to update from recovery but I got a weird error saying 'unable to update, cause: apk not found' I searched google but nothing found. Is the update.zip file case sensitive. I renamed it to 'update.zip' not 'Update.zip'. is it OK.
One more thing after update I tried to skip the WiFi connection but this popped up
image
and I am not able to skip the WiFi connection. Letv is going in apple way
I also calibrated before touching the FPScanner but no use.
same for me.
the sensor does not work or more.
I have a 2 lemax x822.
the sensor works two days with the Roma CM13 19s, and then the third day nothing.
I returned to stock rom 17s, but it still did not work.
I passed the fourth day in the 19s CM13 ROM, and miracle, it works.
but alas today he no longer works again. impossible to calibrate and add a fingerprint.
I try Roma umbrella corps 18s / 19s, but the sensor does not work either.
it gets annoying.
problem of software or hardware?
meuhmeuh51 said:
same for me.
the sensor does not work or more.
I have a 2 lemax x822.
the sensor works two days with the Roma CM13 19s, and then the third day nothing.
I returned to stock rom 17s, but it still did not work.
I passed the fourth day in the 19s CM13 ROM, and miracle, it works.
but alas today he no longer works again. impossible to calibrate and add a fingerprint.
I try Roma umbrella corps 18s / 19s, but the sensor does not work either.
it gets annoying.
problem of software or hardware?
Click to expand...
Click to collapse
I have the same problem. This problem of hardware.
@bahuy2003 thank you for the answer.
it's a shame to have problems with such a good phone equipment rating. especially when it is new for 5 days.
I will have to assert the warranty on the spemall.com site.
hoping that not too long to repair it and well repaired.
I use my max2 without fingerprints. Many people sent their mobiles to warranty, but they were waiting for months for them.
I too having fp problem, anyone have solution please tell.
I too have same problem moreover camera continuously clicking picture.
Sent from my Le X821 using XDA-Developers mobile app
Must be at least partially software
I've tried stock ROMs and am currently running the pseudo CM based on a stock 18 kernel.
Finger print unlock isn't consistent: Sometimes the phone doesn't react for a long time (seconds), sometimes unlock is instantaneous.
Proper training is certainly important to get instantenous responses at all (don't move fingers during training, tap and wait for the vibration confirmation).
Sometimes I resort to clicking the power button and then do a finger-print to unlock, sometimes I just use the pattern to unlock, although that's very rare.
However last night I had a strange experience:
The phone was suddenly receiving fake inputs from the soft buttons, switching between applications without me touching anything and eventually all soft buttons went dead. Touch screen was still perfect, but finger print unlock was also dead, had to use the unlock pattern.
After a reboot (cold) everything was back to normal.
Whatever firmware is running to deal with the fingerprint sensor and the soft buttons (I assume this isn't running on the main cores), seems to be buggy, perhaps leaking memory and requires a restart occasionally.
My guess is that this would take automated testing to fix and I doubt Le Eco is doing that. Actually I guess the code would actually have to come from the hardware vendor for the fingerprint sensor and perhaps Le Eco doesn't have a current version.
Really professional quality is hard to get these days, even in flagship devices costing four times as much as Le Max 2.
Hi!
My phone has problem with CM13, so I tried many roms and so on.
Finally I knew that,
If I flash Radon-V2.8 with choosing FPC, Camera works but Fingerprint scanner die.
If I flash Radon-V2.8 with choosing Goodix, Fingerprint scanner works but Camera die.
Now I use cm-13.0-20160902-UNOFFICIAL-kenzo.zip and be in such situation.
Is there someone in same situation? and how can I solve this problem:crying:?
Sorry for poor English
I have a x821 after 3 years of usage yesterday suddenly my fingerprint sensors have stopped working. Please help.
Edit - In all the other threads related to fingerprint issue the device fingerprint stopped working after few days a week but I don't know how my device fingerprint stop working after 3 years.
No problem now as I was able to come over this problem by -
I firstly installed small eui and then in settings of fingerprint just callibrated fingerprint and whoa!! my fingerprint was working again
My fingerprint sensor stopped working from one day to the next about a year ago and it did not help to factory reset data or reflash the fw
With the update that arrived today (55.2.A.4.154) not only the option in the security menu reappeared but I was able to register the first fingerprint... too bad that when I registered the second one it stopped reading the fingerprint and the option in the security menu disappeared again after a reboot.
Has anything similar happened to anyone with the latest update?
My fingerprint was gone after the 110 update. And i hope it will comeback after this update. I think iy is a software problem. Because my fg sensor was perfect, until that ****ty update.
revox1 said:
My fingerprint was gone after the 110 update. And i hope it will comeback after this update. I think iy is a software problem. Because my fg sensor was perfect, until that ****ty update.
Click to expand...
Click to collapse
I think so too, I don't remember if mine stopped working after an update but it's still strange that after this update it started working again and shortly after stopped
Go to security and Google Play system updates..
Update it.
You will have the Fingerprint.
Mine was disabled earlier and did this to fix it.
Here is the last thing.
Fingerprint disappeared from Settings
Hi everyone, I noticed recently that my phone doesn't unlock with my Fingerprint (I set 3 fingers) and It doesn't show FP icon in bottom of screen before unlocking... So, I went to settings to remove all the saved fingerprints and add them...
forum.xda-developers.com
I hope this will help.
Mnope. For me it didnt help. I lost my patience and gave it to the service. I hope to a refound. I am sick of this bull****.
Fingerprint Issue on J9110 after recent update.
i had a similar issue with OTA updates on my Z2 sony regarding the camera i thought i was a hardware so it sent it in for repair a couple of times.. i found using Xperia Companion reinstall of software fix its issue and it fix my J9110 Fingerprint Reader issue as well
bigthermalboy said:
Fingerprint Issue on J9110 after recent update.
i had a similar issue with OTA updates on my Z2 sony regarding the camera i thought i was a hardware so it sent it in for repair a couple of times.. i found using Xperia Companion reinstall of software fix its issue and it fix my J9110 Fingerprint Reader issue as well
Click to expand...
Click to collapse
how to re-install using Xperia companion.?
if u meant repair then I can confirm that it's not working I tried to repair multiple times
repair is not working with Companion anymore i think