Hi.
I have a Feiteng H7189 with MTK 6589 and Android 4.2.1
I have rooted it
I have taken the scatter file with MTKDroid
I have taken the Recovery.IMG with ADB
I want to compite a new recovery with CWM or TWRP
I have tried but all the file I create do not work
If I put again the original recovery.img all fine
Anyone can compile a recovery form me ? Thanks
here the scatter and the recovery original:
www ddlstorage com/jtav2acevcnn/recovery_H7189.rar.htm
Here some info to compile:
[email protected]:/ $ cat /proc/cpuinfo
cat /proc/cpuinfo
Processor : ARMv7 Processor rev 2 (v7l)
processor : 0
BogoMIPS : 2439.94
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xc07
CPU revision : 2
Hardware : MT6589
Revision : 0000
Serial : 0000000000000000
[email protected]:/ $
[email protected]:/ $ cat /proc/dumchar_info
cat /proc/dumchar_info
Part_Name Size StartAddr Type MapTo
preloader 0x0000000000600000 0x0000000000000000 2 /dev/misc-sd
mbr 0x0000000000080000 0x0000000000000000 2 /dev/block/mmcblk0
ebr1 0x0000000000080000 0x0000000000080000 2 /dev/block/mmcblk0p1
pmt 0x0000000000400000 0x0000000000100000 2 /dev/block/mmcblk0
pro_info 0x0000000000300000 0x0000000000500000 2 /dev/block/mmcblk0
nvram 0x0000000000500000 0x0000000000800000 2 /dev/block/mmcblk0
protect_f 0x0000000000a00000 0x0000000000d00000 2 /dev/block/mmcblk0p2
protect_s 0x0000000000a00000 0x0000000001700000 2 /dev/block/mmcblk0p3
seccfg 0x0000000000020000 0x0000000002100000 2 /dev/block/mmcblk0
uboot 0x0000000000060000 0x0000000002120000 2 /dev/block/mmcblk0
bootimg 0x0000000000600000 0x0000000002180000 2 /dev/block/mmcblk0
recovery 0x0000000000600000 0x0000000002780000 2 /dev/block/mmcblk0
sec_ro 0x0000000000600000 0x0000000002d80000 2 /dev/block/mmcblk0p4
misc 0x0000000000080000 0x0000000003380000 2 /dev/block/mmcblk0
logo 0x0000000000300000 0x0000000003400000 2 /dev/block/mmcblk0
ebr2 0x0000000000080000 0x0000000003700000 2 /dev/block/mmcblk0
expdb 0x0000000000a00000 0x0000000003780000 2 /dev/block/mmcblk0
android 0x0000000028a00000 0x0000000004180000 2 /dev/block/mmcblk0p5
cache 0x0000000007e00000 0x000000002cb80000 2 /dev/block/mmcblk0p6
usrdata 0x0000000040000000 0x0000000034980000 2 /dev/block/mmcblk0p7
fat 0x0000000071180000 0x0000000074980000 2 /dev/block/mmcblk0p8
bmtpool 0x0000000001500000 0x00000000ff9f00a8 2 /dev/block/mmcblk0
Part_Nameartition name you should open;
Size:size of partition
StartAddr:Start Address of partition;
Type:Type of partition(MTD=1,EMMC=2)
MapTo:actual device you operate
[email protected]:/ $
Use this to easily make and flash your own cwm for mtk6589 devices...http://forum.xda-developers.com/showthread.php?t=2379412
I'm new to XDA developer and I registered because I would like to share my findings to the MTKDroidTool developers.
I am using MTKDroidTool 2.4.3 and SP_Flash_Tool_v3.1252.1.104 to root a CAT B15 and these tools work fine. While looking in the MTKDroidTool log files, I noticed a difference in start addresses between the log and scatter files. The MTKDroidTool gives the following start addresses in the logfile:
Part_Name Size StartAddr Type MapTo
preloader 0x0000000000040000 0x0000000000000000 2 /dev/misc-sd
dsp_bl 0x00000000005c0000 0x0000000000040000 2 /dev/misc-sd
mbr 0x0000000000080000 0x0000000000000000 2 /dev/block/mmcblk0
ebr1 0x0000000000004000 0x0000000000080000 2 /dev/block/mmcblk0p1
pmt 0x0000000000400000 0x0000000000084000 2 /dev/block/mmcblk0
nvram 0x0000000000500000 0x0000000000484000 2 /dev/block/mmcblk0
seccfg 0x0000000000080000 0x0000000000984000 2 /dev/block/mmcblk0
uboot 0x0000000000080000 0x0000000000a04000 2 /dev/block/mmcblk0
bootimg 0x0000000000600000 0x0000000000a84000 2 /dev/block/mmcblk0
recovery 0x0000000000600000 0x0000000001084000 2 /dev/block/mmcblk0
sec_ro 0x0000000000600000 0x0000000001684000 2 /dev/block/mmcblk0p2
misc 0x0000000000080000 0x0000000001c84000 2 /dev/block/mmcblk0
ogo 0x0000000000300000 0x0000000001d04000 2 /dev/block/mmcblk0
expdb 0x0000000000200000 0x0000000002004000 2 /dev/block/mmcblk0
android 0x0000000020100000 0x0000000002204000 2 /dev/block/mmcblk0p3
cache 0x0000000020100000 0x0000000022304000 2 /dev/block/mmcblk0p4
usrdata 0x0000000040000000 0x0000000042404000 2 /dev/block/mmcblk0p5
The Scatter files shows:
PRELOADER 0x0
DSP_BL 0x40000
MBR 0x600000
EBR1 0x680000
__NODL_PMT 0x684000
__NODL_NVRAM 0xa84000
__NODL_SECCFG 0xf84000
UBOOT 0x1004000
BOOTIMG 0x1084000
RECOVERY 0x1684000
SEC_RO 0x1c84000
__NODL_MISC 0x2284000
LOGO 0x2304000
__NODL_EXPDB 0x2604000
ANDROID 0x2804000
CACHE 0x22904000
USRDATA 0x42a04000
__NODL_FAT 0x82a04000
__NODL_BMTPOOL 0xffff00a8
The mismatches seems to start at EBR1, the scatter files says that the start address equals 0x680000 but the logfile states 0x080000. It seems that the values in the logfile at the following mask 0xff00000 are not correct. The scatter file is correct because I rooted my phone successfully but the logfile appears to be off. The logfile states '10' while the scatter file says 'a' and so on.
Are my findings correct and is the information above enough to help the MTKDroidTool developers?
Hello everyone. Today I tried to flash Clockworkmod Recovery following the instructions in this video: youtube[DOT]com/watch?v=e5oWt_mpNpw ...Since I cant access downloading mode on my device (a chinese factory menu comes up) I instead went into fastboot mode and tried to flash the recovery image in the video, but when I do I get this error: "partition recovery not support flash". I did some research and found out that my recovery is in a combined partition called mmcblk0. How do I flash it? I used
Code:
dd if=/dev/block/mmcblk0 of=mnt/sdcard/recovery.img bs=1 skip=6291456 count=37224448
and got (what i think) is my recovery image. Also, these are py partitions
Code:
[email protected]:/ # cat /cache/recovery/last_log cat /cache/recovery/last_log Starting recovery on Thu Apr 10 02:26:23 2014 Partition Information: preloader 0x0000000000600000 0x0000000000000000 2 /dev/misc-sd mbr 0x0000000000080000 0x0000000000000000 2 /dev/block/mmcblk0 ebr1 0x0000000000080000 0x0000000000080000 2 /dev/block/mmcblk0p1pro_info 0x0000000000300000 0x0000000000100000 2 /dev/block/mmcblk0 nvram 0x0000000000500000 0x0000000000400000 2 /dev/block/mmcblk0 protect_f 0x0000000000a00000 0x0000000000900000 2 /dev/block/mmcblk0p2protect_s 0x0000000000a00000 0x0000000001300000 2 /dev/block/mmcblk0p3seccfg 0x0000000000020000 0x0000000001d00000 2 /dev/block/mmcblk0 uboot 0x0000000000060000 0x0000000001d20000 2 /dev/block/mmcblk0 bootimg 0x0000000000600000 0x0000000001d80000 2 /dev/block/mmcblk0 recovery 0x0000000000600000 0x0000000002380000 2 /dev/block/mmcblk0 sec_ro 0x0000000000040000 0x0000000002980000 2 /dev/block/mmcblk0 misc 0x0000000000080000 0x00000000029c0000 2 /dev/block/mmcblk0 logo 0x0000000000300000 0x0000000002a40000 2 /dev/block/mmcblk0 expdb 0x0000000000a00000 0x0000000002d40000 2 /dev/block/mmcblk0 android 0x0000000028a00000 0x0000000003740000 2 /dev/block/mmcblk0p4cache 0x0000000017800000 0x000000002c140000 2 /dev/block/mmcblk0p5usrdata 0x0000000052c00000 0x0000000043940000 2 /dev/block/mmcblk0p6fat 0x00000000513e0000 0x0000000096540000 2 /dev/block/mmcblk0p7bmtpool 0x0000000001500000 0x00000000ff9f00a8 2 /dev/block/mmcblk0 recovery filesystem table ========================= 0 /tmp ramdisk (null) (null) 0 1 /boot emmc boot (null) 0 2 /cache ext4 /dev/block/mmcblk0p5 (null) 0 3 /data ext4 /dev/block/mmcblk0p6 (null) 0 4 /misc emmc misc (null) 0 5 /recovery emmc recovery (null) 0 6 /sdcard vfat /dev/block/mmcblk1p1 /dev/block/mmcblk0p7 0
please help
i have a kazam trooper x4.5 i tried to do system update over ota but it fails but don't no why i have found this log file
Starting recovery on Thu Aug 28 10:05:19 2014
Partition Information:
preloader 0x0000000000600000 0x0000000000000000 2 /dev/misc-sd
mbr 0x0000000000080000 0x0000000000000000 2 /dev/block/mmcblk0
ebr1 0x0000000000080000 0x0000000000080000 2 /dev/block/mmcblk0p1
pro_info 0x0000000000300000 0x0000000000100000 2 /dev/block/mmcblk0
nvram 0x0000000000500000 0x0000000000400000 2 /dev/block/mmcblk0
protect_f 0x0000000000a00000 0x0000000000900000 2 /dev/block/mmcblk0p2
protect_s 0x0000000000a00000 0x0000000001300000 2 /dev/block/mmcblk0p3
seccfg 0x0000000000020000 0x0000000001d00000 2 /dev/block/mmcblk0
uboot 0x0000000000060000 0x0000000001d20000 2 /dev/block/mmcblk0
bootimg 0x0000000000600000 0x0000000001d80000 2 /dev/block/mmcblk0
recovery 0x0000000000600000 0x0000000002380000 2 /dev/block/mmcblk0
sec_ro 0x0000000000040000 0x0000000002980000 2 /dev/block/mmcblk0
misc 0x0000000000080000 0x00000000029c0000 2 /dev/block/mmcblk0
logo 0x0000000000300000 0x0000000002a40000 2 /dev/block/mmcblk0
expdb 0x0000000000a00000 0x0000000002d40000 2 /dev/block/mmcblk0
android 0x0000000028a00000 0x0000000003740000 2 /dev/block/mmcblk0p4
cache 0x0000000017800000 0x000000002c140000 2 /dev/block/mmcblk0p5
usrdata 0x0000000052c00000 0x0000000043940000 2 /dev/block/mmcblk0p6
fat 0x0000000051440000 0x0000000096540000 2 /dev/block/mmcblk0p7
bmtpool 0x0000000001500000 0x00000000ff9f00a8 2 /dev/block/mmcblk0
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /boot emmc boot (null) 0
2 /cache ext4 /dev/block/mmcblk0p5 (null) 0
3 /data ext4 /dev/block/mmcblk0p6 (null) 0
4 /misc emmc misc (null) 0
5 /recovery emmc recovery (null) 0
6 /sdcard vfat /dev/block/mmcblk1p1 /dev/block/mmcblk0p7 0
7 /system ext4 /dev/block/mmcblk0p4 (null) 0
I:no boot messages
locale is [(null)]
can't open /dev/tty0: No such file or directory
framebuffer: fd 3 (480 x 854)
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
installing_text: (1 x 1 @ 1896)
erasing_text: (1 x 1 @ 1599)
no_command_text: (1 x 1 @ 1599)
error_text: (1 x 1 @ 1599)
Ielta package path name: /data/data/com.redbend.dmClient/files/vdm_update
I:Setting recovery boot...
I:boot.command=boot-recovery
I:boot.recovery=recovery
I:chilid return code:62I:Resetting recovery boot...
I:boot.command=
I:boot.recovery=
I:local update package not exist /sdcard/update-gmobi.zip
I:android_reboot(ANDROID_RB_RESTART)
Rebooting...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is the eSTAR X45 STOCK KITKAT FIRMWARE
Flash via Sp flash tools( da with all checksums).
I have tested.It is working fine.
WHATEVER YOU DO AT THIS AT YOUR OWN RISK. NEITHER ME NOR XDA WILL BE RESPONBILE IN CASE OF ANY HARDWARE/ SOFWARE DAMAGES CAUSED BY YOU TRYING THESE METHODS. YOU WILL BE SOLELY RESPONSIBLE.
---------------------------------------------------------------------------
HOST 24/7
Stock Rom + Flash tool + TWRP Magic Recovery
PASWORD : stockrom
DOWNLOAD LINK(kitkat mt6572): [Mediafire Link]
>>Rooted Kingroot<<
If need more mirrors i will add it just write. . .
---------------------------------------------------------------------------
~4Developers Firmware.Info
Code:
preloader 0x0000000000880000 0x0000000000000000 2 /dev/misc-sd
mbr 0x0000000000080000 0x0000000000000000 2 /dev/block/mmcblk0
ebr1 0x0000000000080000 0x0000000000080000 2 /dev/block/mmcblk0p1
pro_info 0x0000000000300000 0x0000000000100000 2 /dev/block/mmcblk0
nvram 0x0000000000500000 0x0000000000400000 2 /dev/block/mmcblk0
protect_f 0x0000000000a00000 0x0000000000900000 2 /dev/block/mmcblk0p2
protect_s 0x0000000000a00000 0x0000000001300000 2 /dev/block/mmcblk0p3
seccfg 0x0000000000020000 0x0000000001d00000 2 /dev/block/mmcblk0
uboot 0x0000000000060000 0x0000000001d20000 2 /dev/block/mmcblk0
bootimg 0x0000000000600000 0x0000000001d80000 2 /dev/block/mmcblk0
recovery 0x0000000000600000 0x0000000002380000 2 /dev/block/mmcblk0
sec_ro 0x0000000000040000 0x0000000002980000 2 /dev/block/mmcblk0
misc 0x0000000000080000 0x00000000029c0000 2 /dev/block/mmcblk0
logo 0x0000000000300000 0x0000000002a40000 2 /dev/block/mmcblk0
expdb 0x0000000000a00000 0x0000000002d40000 2 /dev/block/mmcblk0
android 0x0000000040000000 0x0000000003740000 2 /dev/block/mmcblk0p4
cache 0x000000000e200000 0x0000000043740000 2 /dev/block/mmcblk0p5
usrdata 0x0000000052c00000 0x0000000051940000 2 /dev/block/mmcblk0p6
fat 0x00000000435c0000 0x00000000a4540000 2 /dev/block/mmcblk0p7
bmtpool 0x0000000000000000 0x00000000ff7700a8 2 /dev/block/mmcblk0
~4Developers Mount
Code:
/[email protected] /system ext4 (ro,seclabel,relatime,noauto_da_alloc,commit=1,data=ordered)
/[email protected] /data ext4 (rw,seclabel,nosuid,nodev,noatime,discard,noauto_da_alloc,data=ordered)
/[email protected]_f /protect_f ext4 (rw,seclabel,nosuid,nodev,noatime,nodelalloc,noauto_da_alloc,commit=1,data=ordered)
/[email protected]_s /protect_s ext4 (rw,seclabel,nosuid,nodev,noatime,nodelalloc,noauto_da_alloc,commit=1,data=ordered)
AFTER FLASH YOU NEED TO USE "SIMPLE-ADB" ENTER TO FASTBOOT AND USE COMMAND FASTBOOT -W Wait some time and unplug usb cable
Have Fun
---------------------------------------------------------------------------
By Code : Swarmachine
estar Mercury
I have 7" estar Mercury tablet with 5.1.1 android is posible to flash this rom?I want to downgraded
will this work on clone Sony e4i with mt6572 kitkat. I've bricked it and desperately need a compatible firmware. any help will be very much appreciated