[DEV][ROM] Wetek play 2 firmware in K1 Plus DVB-S2/T2 - Android Stick & Console AMLogic based Computers

projet stoped !!!!!
hi
we managed to run the firmware android wetek play 2 in k1 plus and kii pro
work:
dtv from k1
remote
App
lan
update
not work:
just problem app dvb wetek (wetv) and wifi
Can you help?
https://www.youtube.com/watch?v=LuKfzAS6bLc
new
wetek ota v1.4 for k1 plus with DTV from k1
wifi not working
lan ok
tuner ok in dtv
cannot use color keys with the remote, cannot scan dvb-s channels at dtv app
kI PLUS
https://mega.nz/#!e9kBnabR!W4qfiFaCpjvWPj9VZvpcPrtIRLLTozCqCeYuT7FBi4E
or
http://www.mediafire.com/file/4f152...masterv1.4-ota-k1-plus-by-belaid38-signed.zip
for KII PRO
https://mega.nz/#!LlFAULZJ!54_eK_KM-SlnLEGFPmt5gVLjt8kUUufdi-wBJaE9KNM
link sdk driver AVL6862
https://github.com/avlogic/avl6862
If you have installation errors
Use an old official firmware example month 9
Installed and then reinstall this firmware
Because wetek firmware detects if you have a recent installation
latest firmware original of wetek play 2
https://mega.nz/#!PRgWmZrB!CjGEOqi0KJISKBzl-U2XTcgPg408zTycDfR8Q6VZnKk
and modified and futur and app ..is here
https://mega.nz/#F!GsEwiKKD!ccQsgD5SfbPDtkHkKtbouA
methode upgrade in pdf
http://myreader.toile-libre.org/uploads/My_581cacba6af59.pdf
driver tuner not work?
app Dtv k1 plus, work in this firmware but not the app wetektv
I think the problem is in the app because it does not recognize the tuner.
launcher of wetek only
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://mega.nz/#!YtgghZxJ!8xvdAtkZKL9AkzYU17qAiBxO1rsGlP2Z_VCWlmtcj1k
This firmware is to develop and not fully operational

need same update for KII Pro please
original dtv app not good at all no permanent timeshift, No unlimited time shift, there is some lag in FHD channel

fasho said:
need same update for KII Pro please
original dtv app not good at all no permanent timeshift, No unlimited time shift, there is some lag in FHD channel
Click to expand...
Click to collapse
we will do so once the problem tuner and wireless set
it will not work twice for nothing
thank you for your understanding

https://mega.nz/#!o4QhGbAK!3CjqxPW803-qRLZdSZdJ8Omt9tsoXvFNgqHTdXnmo7Y
Good friend can provide the rest of apks
Launcher, You Tube etc.
the same NETFLIX of this apk with audio 5.1
I would like to test it

dts and ac3 working same like in wetek play 2 ?

joaolevi said:
https://mega.nz/#!o4QhGbAK!3CjqxPW803-qRLZdSZdJ8Omt9tsoXvFNgqHTdXnmo7Y
Good friend can provide the rest of apks
Launcher, You Tube etc.
the same NETFLIX of this apk with audio 5.1
I would like to test it
Click to expand...
Click to collapse
https://mega.nz/#F!p4BVwbyK!FoUKEHL7lnpRr4KKpoCE9A

https://mega.nz/#!o4QhGbAK!3CjqxPW80...vFNgqHTdXnmo7Y
apk live tv does not open the same with the wetek2

joaolevi said:
https://mega.nz/#!o4QhGbAK!3CjqxPW80...vFNgqHTdXnmo7Y
apk live tv does not open the same with the wetek2
Click to expand...
Click to collapse
ok thnks
i update other app in links
https://mega.nz/#F!p4BVwbyK!FoUKEHL7lnpRr4KKpoCE9A

I tested V1.3 Firmware. It looks very promising. Keymapping of the remote control seams to be not complete. Especially the non working Exit button is very annoying.
There are 2 advantages of this fimrware compared to the original firmware:
HD Audio Paththrough is supported by the Wetek Media Player (Kodi 16.1) and
Automatic framerate adaption is supported.

wetek ota v1.4 for k1 plus with DTV from k1
wifi not working
lan ok
tuner ok in dtv
https://mega.nz/#!e9kBnabR!W4qfiFaCpjvWPj9VZvpcPrtIRLLTozCqCeYuT7FBi4E
for KII PRO
https://mega.nz/#!G8FxgIjL!2zd2J5FmLvLXSOESiF8gw1RqhFpjZb_lvgPGlInRfKU

Just a few questions incase anyones already tried and would be kind enough to confirm or clarify one or more of these, working with this rom
Note: im more intrested in getting these things working on android rather then resorting to other firmwares such as openelec, and im quite new to the the satelite side of things, so forgive my ignorance and any misconseptions of mine
1)Is the official k1 plus DTV app the only app that can access the dvb conections, as in, scan/view channels through the dvb-t/s physical connections?Can we also use third party apps for this function such as kodi?
2) Has anyone succesfully managed to install tvheadend (backend)?Working ok?
(Someones managed to to do it in a custom rom for wetek play 2, 1.1 firmware here : http://wetekforums.com/v/index.php?p=/discussion/28822/rom-weos-1-3-based-android-tv-v1-1 )
3) Has anyone managed to get ostool (oscam) working : http://linuxsat-support.com/showthread.php/77591-OSCam-for-WeTek-Play-Android with an external USB card reader such as omni 3121, to read and decrypt channels using a legitamately bought satelite subscription card?
BONUS QUESTIONS
4)Is this rom already rooted, if not, is there already a method todo so?
5)Assuming root, has anyone succesfully intalled xposed?
No expectation of answers, as i regretfully suspect this is not a widely purchased device, but, just incase......im putting it out there
Anyway
This would be a very nice budget android/dvb device if the support and interest gained momentum, assuming theres no deal breakers with hardware/software implementation i.e. poor/locked up driver support
Im imagining replacing my sat box with an android alternative(been eyeing the wetek p2 after my k1 purchase), watching live tv without using the internet and using up bandwidth, testing androidDVB specific apps, apps that may perhaps improve the channel surfing/gui/epg/integration/recording/timeshifting over time, and, one thing that intrigues me, being able to cast those channels over the local network to other devices (which i was surprised to find out about), minus the internet bandwidth
One can dream........right
On the final note, thanks guys for the work you've done with this device

1)in libreelec yes with vdr
2 yes tvheadend in libreelec,
i have contact Someones, his not interesed for k1 plus
3 and other im sory i dont know
thanks
acced to streamin in
Ipofk1plus:8008
exemple 192.168.1.5:8008

algdu83 said:
wetek ota v1.4 for k1 plus with DTV from k1
wifi not working
lan ok
tuner ok in dtv
https://mega.nz/#!e9kBnabR!W4qfiFaCpjvWPj9VZvpcPrtIRLLTozCqCeYuT7FBi4E
for KII PRO
https://mega.nz/#!G8FxgIjL!2zd2J5FmLvLXSOESiF8gw1RqhFpjZb_lvgPGlInRfKU
Click to expand...
Click to collapse
k1
Do not install error
Following your PDF method !!

I managed to install !! ok installation:fingers-crossed:
1- I'm with root access problems
removing some apk root?
2- APK DTV works ok extract a list of channels and it worked!
some more control keys do not work!
epg, info, subt, audio these keys are not working.
3- It would be possible to put this version APK DTV latest firmware,
Without putting the apks the Malaysk bothers whenever I turn on the device you are asking to use the apk Malaysk as launcher.
4- leaving only the TV apk KI plus original and correcting the control buttons
already and ultilizavel is possible?
or simple root access to exclude others would importance
KI_PLUS_DTV-ota-20161025.104046.V1031P3
https://yadi.sk/d/aiE8YnFQxv4qy

joaolevi said:
I managed to install !! ok installation:fingers-crossed:
1- I'm with root access problems
removing some apk root?
2- APK DTV works ok extract a list of channels and it worked!
some more control keys do not work!
epg, info, subt, audio these keys are not working.
3- It would be possible to put this version APK DTV latest firmware,
Without putting the apks the Malaysk bothers whenever I turn on the device you are asking to use the apk Malaysk as launcher.
4- leaving only the TV apk KI plus original and correcting the control buttons
already and ultilizavel is possible?
or simple root access to exclude others would importance
KI_PLUS_DTV-ota-20161025.104046.V1031P3
https://yadi.sk/d/aiE8YnFQxv4qy
Click to expand...
Click to collapse
for root
the same method
http://www.cnx-software.com/2015/12...-based-minix-neo-u1-box-in-windows-and-linux/
app k1 original from firmware 25/10
https://mega.nz/#F!Sp1zEK6R!d2qzG4wkThtPLpXDz-R9tA!GkFgzCQB
test th_dtv.apk

algdu83 said:
for root
the same method
http://www.cnx-software.com/2015/12...-based-minix-neo-u1-box-in-windows-and-linux/
app k1 original from firmware 25/10
https://mega.nz/#F!Sp1zEK6R!d2qzG4wkThtPLpXDz-R9tA!GkFgzCQB
test th_dtv.apk
Click to expand...
Click to collapse
thank you
some more control keys do not work!
epg, info, subt, audio these keys are not working.
or this problem happens only here?
I'll try again

joaolevi said:
thank you
some more control keys do not work!
epg, info, subt, audio these keys are not working.
or this problem happens only here?
I'll try again
Click to expand...
Click to collapse
yes known problem
sory
are you routed a k1 plus?

algdu83 said:
yes known problem
sory
are you routed a k1 plus?
Click to expand...
Click to collapse
Yes KI plus
Good friend what to say and with original firmware KI plus audio can change the DTV and using wetek2 software some functions do not work in the same apk DTV?

joaolevi said:
Yes KI plus
Good friend what to say and with original firmware KI plus audio can change the DTV and using wetek2 software some functions do not work in the same apk DTV?
Click to expand...
Click to collapse
non the app not working in original firmware..
when you put the original firmware and rooter, it is possible to extract a folder with ES File Explorer File Manager?
enable the root mode and file display mode hide
you go to a /dev folder in the root that contains drivers etc.
it is possible to retrieve a /dev folder and send it to me?
because the file of the original firmware will help me progress
thank you

the solution for things ahead here is to ask the support of the KI PLUS tuner
I count on you to get the message and lobby
https://plus.google.com/u/0/communi...7/stream/95c51532-4db9-4fbe-a91e-3a621cab42bd

Related

[OLD VERSION] [ROM] Aidan's ROM [v7.5] [Netflix TV] [Prime Video TV] [S905X] [ATV 7.1.2] [OLD VERSION]

THIS HAS BEEN REPLACED WITH V7.4 (27/10/2020) FIND HERE
https://forum.xda-developers.com/an...m-aidans-android-tv-custom-rom-7-1-2-t4104869
THIS HAS BEEN REPLACED WITH V7 (26/05/2020)
https://forum.xda-developers.com/an...m-aidans-android-tv-custom-rom-7-1-2-t4104869
This is my version 6 Rom (Second shared), i use this as a daily driver and it is stable
Improvements Made
No longer based on atvXperience
User Interface renders at full 1080p
Fixed bug where remote power button would turn box off/standby but not wake it up again
Added Miracast (scren mirroring)
Removed Chromecast and other bloat (wont work in uncertified devices and would fill storage in 24 hours)
New bootlogo and boot animation (No longer will bootanimation appear frozen during 1st boot)
Bluetooth disabled Version (now optional there is a bluetooth enabled version too)
Misc tweaks & adjustments
Im very happy with how this turned out, please install and let me know if it works for you have any suggestion
Bug: Issue with root, if anyone knows about pre rooted images advice would be good
Bug: Miracast no longer works for me(will probably remove)
Tested on
MXQ Pro 4K (1/8GB P212)
rasse-001 (unknown Ram/rom)
Install using amlogic burn tool
Download NEW V7.4 From [October 2020] (XDA LINK)
https://forum.xda-developers.com/an...m-aidans-android-tv-custom-rom-7-1-2-t4104869
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What it looks like with apps installed:
aidanmacgregor said:
This is my version 6 Rom (Second shared), i use this as a daily driver and it is stable
Improvements Made
No longer based on atvXperience
User Interface renders at full 1080p
Fixed bug where remote power button would turn box off/standby but not wake it up again
Added Miracast (scren mirroring)
Removed Chromecast and other bloat (wont work in uncertified devices and would fill storage in 24 hours)
New bootlogo and boot animation (No longer will bootanimation appear frozen during 1st boot)
Bluetooth disabled (I can re add bluetooth functonality if someone needs it)
Misc tweaks & adjustments
Im very happy with how this turned out, please install and let me know if it works for you have any suggestions
Install using amlogic burn tool
Download From Google Drive (Fast)
https://drive.google.com/open?id=1kM-yE3sHxSAntWvpSjxeeP3nbqIa536V
What it looks like with apps installed:
Click to expand...
Click to collapse
Installed today and really impressed, no lags nice interface. Just can't find how to edit home screen.
Aliux said:
Installed today and really impressed, no lags nice interface. Just can't find how to edit home screen.
Click to expand...
Click to collapse
Thanks
Edit how?, move the icons around, add custom shortcuts to non TV apps or change the wallpaper? ect...
Also What hardware did you install on?
Hello. I really liked your custom firmware. Everything works well. There is no bluetooth in the settings, you can install it or give firmware with working bluetooth. Loved but lacks bluetooth.:good:
KaShey31 said:
Hello. I really liked your custom firmware. Everything works well. There is no bluetooth in the settings, you can install it or give firmware with working bluetooth. Loved but lacks bluetooth.:good:
Click to expand...
Click to collapse
Thanks
Yes i can look at adding bluetooth, a few hours maybe
my box has no bluetooth so i cant test that functionality specifically so you would need to test it and let me know
also what box did you install on?
Bluetooth Version Now Added!!!
Hi, will this work on Mecool M8S Pro+ 2GB/16GB ?
Krappa420 said:
Hi, will this work on Mecool M8S Pro+ 2GB/16GB ?
Click to expand...
Click to collapse
Yes, i havent tested it but this rom is intended for most boxes with s905x (Universal), if you install let me know if it works well and any issues, thanks
Great custom Rom, I tried flash to HG680-P which using Armlogic S950x, 2GB/8GB, unfortunately I got error on 7% with error message "[0x32030201]Uboot/Get result/DiskInitial error
Any advice regarding case above?
Ps: After that error, I tried flash HG680-P stock rom, and success, i mean i think there is no related with software version of flashing tool or usb to usb cable.
Any feedback will really appreciated
ariey said:
Great custom Rom, I tried flash to HG680-P which using Armlogic S950x, 2GB/8GB, unfortunately I got error on 7% with error message "[0x32030201]Uboot/Get result/DiskInitial error
Any advice regarding case above?
Ps: After that error, I tried flash HG680-P stock rom, and success, i mean i think there is no related with software version of flashing tool or usb to usb cable.
Any feedback will really appreciated
Click to expand...
Click to collapse
hi Try this version of USB Burning Tool its the one ive been using for 6 months
https://drive.google.com/open?id=1oS0WAjJ-u9IaKb4GSd8zqHL4VbCHjhiW
Also when connecting the box to flash click START before you connect the box
but sounds like it dont like the uboot if you have a working ROM it may be possible to take thew uboot out of it and insert it this ROM
Hi,
I am very new to this, but this looks great. I was wondering whether you could tell me if this would also work for a S905 chipset device? I have a Trongle S2 on 5.1.1 so would like to upgrade, but cannot find any official firmware for it. Thanks!
Slash2010 said:
Hi,
I am very new to this, but this looks great. I was wondering whether you could tell me if this would also work for a S905 chipset device? I have a Trongle S2 on 5.1.1 so would like to upgrade, but cannot find any official firmware for it. Thanks!
Click to expand...
Click to collapse
Im not sure, i dont think it would work though
Could try this https://forum.atvxperience.com/viewtopic.php?f=18&t=545
it may get you booted into somthing and could take it from there
Hello, it works on MXQ S905X 64 Bits first generation WIFI ok.Just that disney + no sound I'm looking if there is not a way to modify in buid.prop so that the sound works, the sound works on youtube and others without disney +.
THANK
meric57 said:
Hello, it works on MXQ S905X 64 Bits first generation WIFI ok.Just that disney + no sound I'm looking if there is not a way to modify in buid.prop so that the sound works, the sound works on youtube and others without disney +.
THANK
Click to expand...
Click to collapse
Hi, i dont think it has anything to do with the build prop, more lightly either its a drm issue or it could be a codec issue, Android tv seems to have issues with D+ alot of the time
You could maybe try the settings and turning off any audio processing, i dont have Disney plus so i cant really test that specifically
aldo read somwhere if you start downloading what you want to watch then play it that maight work as a workaround, Good luck
will it work on dvbs2 and t2 device?????
george-cgs said:
will it work on dvbs2 and t2 device?????
Click to expand...
Click to collapse
As in a device with a tuner built in? If so then it will work probably work but the tuner might not, as long as the SOC is a S905X this should run
New update soon
Got new box, (Trongle X1) wifi not working, fix soon will add a couple wifi drivers
Hi All,
this image is working great for my NPET s905x 2G Box, as Wifi and Bluetooth are now working again!
Great work, man!
One question remain: How do I get Amazon prime working on this box, as I cant get any movie to load. it says : "Something is wrong here!"?
Cheers,
Cromatic
Cromatic said:
Hi All,
this image is working great for my NPET s905x 2G Box, as Wifi and Bluetooth are now working again!
Great work, man!
One question remain: How do I get Amazon prime working on this box, as I cant get any movie to load. it says : "Something is wrong here!"?
Cheers,
Cromatic
Click to expand...
Click to collapse
Hi ,Thanks, i think it has to do with the device not having Widevine L1 certifacation, its the reason netflix wont work either, you could try the mobile version of the app as that (as far as i know) only needs Widevine L3 (wich this rom supports) the prime and netflix (TV Verions) wont work due to this, i dont have a prime or netflix account to test the mobile versoins, if it works let me know please
https://apkpure.com/amazon-prime-video/com.amazon.avod.thirdpartyclient/download?from=details
That works fine! Thanks...you made my day!
Cromatic said:
That works fine! Thanks...you made my day!
Click to expand...
Click to collapse
Awesome thats good news

[ROM] Aidan's ROM [v7.5] [Netflix TV] [Prime Video TV] [S905X] [ATV 7.1.2] (Lag & Bloat Free, Pre Rooted, Samba & Miracast) 2021 Update!

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Aidan's Custom Android TV 7.1.2 ROM
UPDATED: 10/02/2021
Netflix For Android TV!
This is version 7.5 of my Rom, i use this as a daily driver and it is stable, it is CLEAN & NO BLOAT (any included apps are removable), this replaces my previous version (v6, v7 & v7.1 ect...)
UPDATE: Aidan's Android TV 9 Pie Xiaomi Mi Box Firmware Port To S905X Now Also Available!
XDA Post Clock Here
NEW Website! Check it out & Downloads
https://aidansrom.wordpress.com/
Improvements Made [V6]
●NOT pre-rooted (Flash Magisk via TWRP for root)
●User Interface renders at full 1080p
●Fixed bug where remote power button would turn box off/standby but not wake it up again
●Added Miracast (scren mirroring) [BROKEN] FIXED IN V7
●Removed Chromecast and other bloat (wont work in uncertified devices and would fill storage in 24 hours)
●New bootlogo and boot animation (No longer will boot animation appear frozen during 1st boot)
●Added New App Drawer (And modified APK) THIS WILL SHOW NON TV APPS
●Misc tweaks & adjustments
Improvements [V7]
●Added More Wi-Fi Drivers
●WIFI & LAN SPEED fixed (Was maxing about 6Mbps, now sucsesfully got 40Mbps)
●DPI Changed to 320 (Android TV Stock DPI)
●More tweaks
●Now comes with Filelinked Pre-installed (You can uninstall if you dont need)
Improvements [V7.1]
●TWRP replaced as was rendered at 720p in the top left on corner some devices
●More WiFi & Bluetooth improvements
●Updated boot animation android tv 11 (Thanks khurramrizvi for extracting)
●Added more keylayout files (USB)
●More visual tweaks
●More Performance tweaks
Improvements [V7.2] (19/09/2020)
●Fixed Disney+ No sound issue fixed (Thanks to DiogoSilva48)
●More visual tweaks
●More Performance tweaks
Improvements [V7.3] (06/10/2020)
●PRE ROOTED! (Root switch does not work, Always ON)
●Disney+ now has working sound (v7.2 but worth mentioning again)
●All preinstalled apps can be Un installed (exept system apps)
●Samba Windows File Server [NAS] (Usb HDD, SD, Internal)
●Google Documents UI added (fixes bugs in some apps opening files)
●Stock Downloads File Explorer Added (Related to documentsUI)
●Google Assistant Text Search Navigation Bug
●Phone Settings crash fixed
●Wi-Fi Tethering now works (Ethernet to Wi-Fi)
●Changed Mouse cursor
●Certificate installer fixed
●GlobalKeyInterceptor added
●OneTimeInitaliser added
●GooglePartnerSetup added
●Updated Backdrop (no longer claims chromecast built in)
●Alternative Screensaver Included (Can uninstall)
●Reboot to recovery option in all apps section
●More visual tweaks
●More Performance tweaks
Improvements [V7.4] (06/10/2020)
●Added missing Files for WiFi Chip AW-NH665 (Thanks Erick)
●Special Build for devices that fail to flash Universal ONLY (MXQ Special Build) (Testing Need Feedback)
Improvements [V7.5] (10/02/2021)
● Added Netflix Android TV Version
Im very happy with how this turned out, please install and let me know if it works for you what device you installed on & if you have any suggestion
Facebook Page
https://bit.ly/facebookaidansrom
Tested on
●MXQ Pro 4K (1GB RAM)
●Trongle X1 (2GB RAM)
●NPET A95X( 2Gb RAM)
●rasse-001 (unknown Ram/rom)
●Leelbox q2 (unknown RAM/ROM)
●X96 (1GB Ram 8GB Rom)
●Beelink MXIII-II (Unknown RAM/ROM)
●T95X
●Nexbox A95X [SPECIAL BUILD FOR REMOTE AVIAILIBLE]
●Sammix R95
●M9C PRO
●X96 Max
●Buzz TV XPL 3000 (Needs my Buzz TV 3000 Remote. patch)
●Trongle S3 (Report that needs super su to root)
●T95N
●TX3 PRO
●KM5 OTT 1GB/8GB (No reset button 1 user reported using "Reboot Update" worked)
●Alfawise A12 Plus Projector (AW-NH665 WiFi fixed in v7.4, Also Needs my Remote patch)
●T6 S905X 1/8GB
●KM5 (This Version only Worked With Alternative Special Build AKA: MXQ Special Build) [No Reset Button, Connect the box to PC with USB & Connect AC Power WHILE also pressing the Power Button, the device should then connect to the software and Flash]
●Many More...
Known Issues
Wifi chip HS2734A
ZTE B860H (2 reports didn't work)
MXQ boxes have hundreds of clones, should work on 90% of boxes if no Roms work at all for you I have some last resot ROMs at bottom of this post
V7 Download From Google Drive (Fast Download)
Replaced with v7.1
V7.1 Download From Google Drive (Fast Download)
Replaced with v7.2
V7.2Download From Google Drive (Fast Download)
Replaced with v7.3
V7.3 Download From Google Drive (Fast Download) (06/Oct/2020)
Replaced with v7.4
[V7.4] Universal Download (Fast Download) (24/Oct/2020)
Special Builds (Fast Download) (06/Oct/2020)
[v7.4] Nexbox A95X Remote WITH POWER ON BUX FIX (07/07/2020) (Updated 24/Oct/2020)
This Version Has Nexbox_Remote.zip pre installed in case can't access recovery to flash the patch (Added 22/06/2020)
^ Thanks to klo33 (freaktab) for testing these changes
[v7.4]Alternative Special Build [ONLY Use IF Universal Fails!] (07/07/2020) (Updated 24/Oct/2020)
This Version has additional DTB files (Alternative P212 + p214 & p242)
Drawback is the UI is rendered at 720p with 210 DPI, The UI wont look as Sharp as universal 1080p with 320 DPI
FEEDBACK NEEDED!!
MY Patches (Flash with TWRP)
https://drive.google.com/drive/folders/1DwgIHPeV4RB5eMeAG_Pf8H0oMMPJBWq5?usp=sharing
●Mygica atv 495x REMOTE (Thanks to nicko450 for supplying the remote.conf file)
●Buzz TV XPL 3000 Remote patch (You need to use ADB or terminal to enter recovery on these Devices)
●Xview R7 Remote Patch
●Mini M8S II Remote Patch (Thanks to Kishore12 for finding and fixing a .conf file)
●Sunvell T95k Pro Remote Patch
●Alfawise A12 Plus Projector Remote Patch
Patches (Flash with TWRP) [BY MINIXFREAK]
Nextbox, sunvell, Mecool, Zoomtak Remote Patches
a95X, l8, Magicsee, T95U, T95Z, Tanix, x92, Zoomtak, Youndoo Clock Patches
QC9377 & 4.1 Bluetooth patches
https://mega.nz/folder/5o5B0SII#p-W0crI8UbegQNA80vKSzQ/folder/x9YXRIxD
Install using amlogic burn tool
DOWNLOAD AND HOW TO:
https://bit.ly/aidanscustrom
Donate & Support Me & Buy me an IRN-BRU
Paypal: http://paypal.me/aidanmacgregor92
Bitcoin: 1GhSiPf2ZURa9HiVMVh5KXmmB8nXr6nCVZ
FAQ (WIP)
Q. Netflix wont work from play store
A The TV Version of Netflix needs Widevine Level 1 DRM, This cannot be added to your device with a firmware, FIXED IN LATEST VERSION PATCHED NETFLIX PREINSTALLED
Q. Amazon Prime Wont Work
A. Like Netflix Install the mobile app, the TV version needs Widevine Level 1
Q. Disney+ No Sound
A. Fixed in v7.2
Q. Root Switch Wont Work
A. Unfortunately v7.3 is always rooted and the switch doesn't work (I may offer unrooted versions if there is demand)
Screenshots On The Website
https://aidansrom.wordpress.com/
NONE OF MY ROMS AND NO OTHER ROMS WORK?
If you have one of these devices that really struggle taking any custom ROM, sometimes these are MXQ devices (there are so many clones of these devices) and they may have a locked bootloader or it needs a DTB that isn't common or known, there are some ROMs that have saved some people before, these are only if no other custom ROMs will work for you and are a last resort
See this post:
[ROM] Aidan's ROM [v7.5] [Netflix TV] [Prime Video TV] [S905X] [ATV 7.1.2] (Lag & Bloat Free, Pre Rooted, Samba & Miracast) 2021 Update!
Aidan's Custom Android TV 7.1.2 ROM UPDATED: 10/02/2021 Netflix For Android TV! This is version 7.5 of my Rom, i use this as a daily driver and it is stable, it is CLEAN & NO BLOAT (any included apps are removable), this replaces my previous...
forum.xda-developers.com
can it be install on mibox 3c (mdz 16 aa) that use s905 chip??
g2mantap said:
can it be install on mibox 3c (mdz 16 aa) that use s905 chip??
Click to expand...
Click to collapse
I'm not sure, I would say no but from what I saw s905 just lacks hardware vp9 decoding so if your feeling brave
Hi, great looking ROM, however, can I ask why you have removed root? Is it possible to root at all?
badgerthedon said:
Hi, great looking ROM, however, can I ask why you have removed root? Is it possible to root at all?
Click to expand...
Click to collapse
Thanks
i just haven't been able to get it working correctly yet, still learning a lot about the android ROM structure ect... only started this a few months ago as a mission to make my own s905x box usable and actually bearable to use i would ideally like to have it pre rooted with the switch in settings actually working, but so far have been unsuccessful, It is possible to flash magisk with TWRP on my ROM (TWRP IS PRE INSTALLED BOOT WITH TOOTHPICK METHOD)
badgerthedon said:
Hi, great looking ROM, however, can I ask why you have removed root? Is it possible to root at all?
Click to expand...
Click to collapse
Sorry ignore my ramblings about recovery, seems my reset button n my 1GB RAM box is flaky, flashed it at least 250 times past few weeks haha,
Sorted now just have to apply extra pressure, as it worked on my 2gb box
Boot into recovery and flash Magisk.zip
Test its installed correctly by running Root checker.apk
https://drive.google.com/open?id=1rr02uqmrYqJ5vi97P06-e63Z71CfUlyL
Wow, I'll get on that and take a look. Do I just flash it with the Magisk zip when in recovery?
Thanks for the reply.
badgerthedon said:
Wow, I'll get on that and take a look. Do I just flash it with the Magisk zip when in recovery?
Thanks for the reply.
Click to expand...
Click to collapse
Yes just flash with TWRP recovery
never got as far as testing adding root with magisk but yhea seems to work, and my aim is to have it so stable that root is mostly unnesicerry and to make it as user friendly as possible ans will be using my firmware when i set up boxes for people in my area
out of curiosity what are you looking to change aor add?
H96 mini
Hello, good rom ! I installed in a H96 mini without problems. The only issue is the wifi. It is not working.
Walfilho said:
Hello, good rom ! I installed in a H96 mini without problems. The only issue is the wifi. It is not working.
Click to expand...
Click to collapse
Thanks
Do you know what wifi module your box has, you can open the device and check if your not sure OR if you have a working ROM i could attempt to extract drivers & FW
aidanmacgregor said:
Thanks
Do you know what wifi module your box has, you can open the device and check if your not sure OR if you have a working ROM i could attempt to extract drivers & FW
Click to expand...
Click to collapse
Thanks for your fast reply. I can´t post links in the forum( i am a newbie) with detailed information. In the picture below you can see the board . Perhaps you can idenfify the wifi module. The stock firmware can be found in h96tvbox site.
Walfilho said:
Thanks for your fast reply. I can´t post links in the forum( i am a newbie) with detailed information. In the picture below you can see the board . Perhaps you can idenfify the wifi module. The stock firmware can be found in h96tvbox site.
Click to expand...
Click to collapse
hi, the problem with these boxes there is so many clones, lookalikes ect you really need to look and see, i think i have worked out the what chip it might be but would be awesome if you could look, the WiFi chip always is close to where the WiFi Arial attaches to the logic board
like this notice the SCI wifi module
https://forum.libreelec.tv/core/attachment/1085-thumbnail-20170224-230244-jpg/
aidanmacgregor said:
hi, the problem with these boxes there is so many clones, lookalikes ect you really need to look and see, i think i have worked out the what chip it might be but would be awesome if you could look, the WiFi chip always is close to where the WiFi Arial attaches to the logic board
like this notice the SCI wifi module
Click to expand...
Click to collapse
The chip is a HS2734A V15628 98MA. It is close to the aerial.
hey there
i installed it and the remote control is not working ...........and i checked it it should be working .
i am stalked with the language menu,what could be wrong?????
Walfilho said:
The chip is a HS2734A V15628 98MA. It is close to the aerial.
Click to expand...
Click to collapse
ok thats what i suspected it might be, i will see about adding the drivers asap
Edit: Ok added flash this and let me know if it works
https://drive.google.com/file/d/1uIMEN_DsrYQgpZq60JlveoiIdBmC5NUJ/view?usp=sharing
george-cgs said:
hey there
i installed it and the remote control is not working ...........and i checked it it should be working .
i am stalked with the language menu,what could be wrong?????
Click to expand...
Click to collapse
hi, every box has a diffrent remote, ive included as many as possible blindly, i would need a file from a working rom, i wouls suggest flashing a few roms until your remote works and i can try to addthe remote.conf file
Also if you have a USB keyboard you can use that to get through the set up, then go to settings and enabe HDMI CEC (This allows your tv remote to control the box if your TV supports it)
Oh and game controllers, ps3 USB and Xbox one bluetooth (Maybe others untested)
Thank you ?? for ur quick response that is very kind of yoy...
I have a rom that the remote is working on it....can you tell the way to extract the remot.cinfig file from it then how to add it to ur rom or send it to u and u can gratefully add it ......thanks]
If you can upload the ROM to google drive or somewhere similar and share the link (you can PM the link if you cant post)
I'm trying to get v7 going on a TX3 Pro (may be real, may be a clone - Nanya DDR, RTL8189FTV WiFi), it's 1G/8G S905X. Aside from TX3pro-specific firmwares, nothing works on it - most do not get past the bootloader stage (red light). It's the same case for yours; however, using the AMLogic tools & overwriting a few files extracted from a working TX3pro-specific firmware (I believe I overwrote UBOOT.USB, boot.partition, bootloader.partition, DDR.USB, image.cfg, and removed _aml_dtb.PARTITION), I was able to boot yours to the boot logo - but no further.
The stock firmware in question is here.
The bottom of this thread contains a few more.
This one was also successfully tested.
Would it be possible to create an adapted firmware? A pointer to the backend steps involved in doing so would also be helpful, I'm quite motivated in experimenting with this device. I will solder up the serial header for further debug output shortly. Thank you!
aidanmacgregor said:
ok thats what i suspected it might be, i will see about adding the drivers asap
Edit: Ok added flash this and let me know if it works
https://drive.google.com/file/d/1uIMEN_DsrYQgpZq60JlveoiIdBmC5NUJ/view?usp=sharing
hi, every box has a diffrent remote, ive included as many as possible blindly, i would need a file from a working rom, i wouls suggest flashing a few roms until your remote works and i can try to addthe remote.conf file
Also if you have a USB keyboard you can use that to get through the set up, then go to settings and enabe HDMI CEC (This allows your tv remote to control the box if your TV supports it)
Oh and game controllers, ps3 USB and Xbox one bluetooth (Maybe others untested)
Click to expand...
Click to collapse
Hi, I loaded the new firmware but the wifi continues turned off.
Walfilho said:
Hi, I loaded the new firmware but the wifi continues turned off.
Click to expand...
Click to collapse
Ok i have a couple of my older roms that were were my earlier attempts at a decent ROM, they have diffrent base roms and wifi might work, I could then try again or port my ui, apps ect to that rom and it would be a specific build for your wifi chip
I will put links up soon

Rom ATV9 Android 9.0 Cho Amlogic S912 By DaivietPDA

I have tested the rom of the friend Amlogic s912 Android Pie ATV by DaivietPDA and it is perfect to the point that all the other rooms are rubbish next to this it is functional without flickering pin problems fast Youtube vance on prog tv beta on netflix HD on
https://www.youtube.com/watch?v=l0Swj9Suy5U
https://daivietpda.com/2020/07/rom-a...-amlogic-s912/
https://drive.google.com/file/d/1l55...Vj32ykzm4/view
Rom ATV9 Android 9.0 Cho Amlogic S912 By DaivietPDA excelent good
Support the following types of infrared controls for normal use and on and off:
Tanix control, mecool control, enybox control, himedia control, fly mouse control and voice support
Download aml_upgrade_package_s912-pie-beta2.img tool to run Amlogic + USB + Burning + Tool_v2.1.7.0.exe
have tested this beta on Himedia A5, Nexbox A1, EM92, vibox v8 plus 3G ...
—————————————————————————
The following updates will be added here:
The s912 devices use LPDDR3 RAM a lot, so I don't have the equipment to test, I just built it here and you guys are the testers. (PATCH lpddr3 by HighwayStar)
S912 LPDDR3 WIFI 9377 (ltm8830) spread 100Mbps (M8S PRO L LS ....) aml_upgrade_package_s912-pie-beta2-lpddr3-3G-wifi9377-100.img
S912 LPDDR3 WIFI 9377 lan 1000Mbps (h96 pro + tx9pro 3G LAN1000… ..) aml_upgrade_package_s912-pie-beta2-lpddr3-3G-wifi9377-1000.img
S912 LPDDR3 WIFI BCM4335 (KM6335) lan 100Mbps (M8S PRO L LB) aml_upgrade_package_s912-pie-beta2-lpddr3-3G-BCM4335-100.img
………………………
————————————————————————
S912 ATV9 VERSION FOR TX9PRO 2G / TX3 MINI S912. This is a s912 main configuration which is missing with 2G 8bit ram and emmc4.5 running with lower performance than standard s912 boxes, so can not run with the above Roms, I have built for s912 This is a separate version, pay attention because the performance is not high so if google play store is updating youtube, it will be out youtube while watching, please update or turn off the automatic update, generally works ok.
DOWNLOAD aml_upgrade_package_s912-pie-beta2-ddr3-2g-100-tx9pro.im
Any chance this might work on a minx u9h? it also has the s912.
devo-devo said:
Any chance this might work on a minx u9h? it also has the s912.
Click to expand...
Click to collapse
yes it will work, some .IMG and update will work, even remote control
drakulaboy said:
yes it will work, some .IMG and update will work, even remote control
Click to expand...
Click to collapse
tried installing using the amlogic usb burning tool 2.1.7.1 yesterday and the stock remote no longer worked. Also, the usb mouse wouldn't work so I had to try an atvx rom. Would love any helping figuring out how to get this running on my minix u9-h
remote
Hi i have a Yoka tv kb2 s912 2gb ddr3/ 32gb rom.. just wondering if this remote would work for firmware?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I installed it on my TX9S, 2GB RAM, 8 ROM. It is functioning normally. But there are 2 observations:
1) the LED light on the display, which was previously red when the BOX was off, is only blue (both on and off).
2) the mouse function of the controller does not work (I believe it is because AndroidTV has a different navigation).
The only bad thing about this firmware , you cant passthrough DD Thru HD and DTS HD in kodi.
In settings it doesnt have HDMI passthrough option ,only SPDIF.
In Kodi settings DTS HD and Dolby Thru HD options cant appear.
How to change Language from Vitenamse (default) to English
I have flashed rom with aml_upgrade_package_s912-pie-beta2.img on Nexbox A1. I am unable to change its language in Nexbox A1 while using because i do not understand vitanemese. How to change it.? I would be thankful for quick response.
Regards,
awaisiqbal said:
I would be thankful for quick response.
Regards,
Click to expand...
Click to collapse
for the last step you will need a mouse to drag&drop
so, go to Settings (the Gear) and then go to Droid Settings then to More Settings, you will enter in "white settings" then go down here to the last option (He Thong) https://i.imgur.com/ygvRTQa.png
then to the second option here
https://i.imgur.com/43sCHJb.png
then click on first option in where is (Viet Nam)
https://i.imgur.com/lRCaUbT.png
add new language with +
then with mouse double click the second language and keep it pressed and drag it up
https://i.imgur.com/eB4lG9R.png
that's it
Thanks alot. I had already figured it out after taking half an hour.
I could not kept your quotes in reply due to following error
"* The following errors occurred with your submission:
To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding! "
I have the TX92 LPDDR 3/32GB device. Anyone flashed to this?
working links....
https://daivietpda.com/2020/07/rom-atv9-android-9-0-cho-amlogic-s912/
https://drive.google.com/file/d/1l55zNFE_gXSifk9xTYFAFUMVj32ykzm4/view
FerociousAndroid said:
working links....
https://daivietpda.com/2020/07/rom-atv9-android-9-0-cho-amlogic-s912/
https://drive.google.com/file/d/1l55zNFE_gXSifk9xTYFAFUMVj32ykzm4/view
Click to expand...
Click to collapse
for TX92 LPDDR3? It is BGA board hard to unbrick, thats why I am asking
No sure, I suggest translate and read the 1st link.
Soldiaz said:
for TX92 LPDDR3? It is BGA board hard to unbrick, thats why I am asking
Click to expand...
Click to collapse
This rom works great for h96 pro plus 3g 32gb, I installed it recently, the only problem I'm having is when I use ethernet connecting to VPN ethernet disconnects from the box my Solution: (1)remove ethernet cable (2)connect VPN with wifi (3)plug ethernet cable back in (4)disconnect wifi and it works on ethernet with VPN.(or you can just use the box on wifi only)
Hi guys, I have installed on my old sunvell t95z plus 2 / 16gb 9377 and everything works perfect and fast, it really looks like another device. I want to tell you that you need to download and install the ota on the daiviet pda page for the BT to work properly. There is only one small problem with the t95z the front clock dont's work.
Does anyone know any patches for this? I've tried the ones listed in atvxperience for Nougat but logically they don't work.
Thanks
vmax377 said:
Hi guys, I have installed on my old sunvell t95z plus 2 / 16gb 9377 and everything works perfect and fast, it really looks like another device. I want to tell you that you need to download and install the ota on the daiviet pda page for the BT to work properly. There is only one small problem with the t95z the front clock dont's work.
Does anyone know any patches for this? I've tried the ones listed in atvxperience for Nougat but logically they don't work.
Thanks
Click to expand...
Click to collapse
There is no patch for android 9, devs needs to integrate in kernel and rom, I don't think anyone is interested, there are already some patches available on GitHub
i managed to make it work on Pie, but it's buggy, sometimes it's turning off or it's showing some strange symbols
Ms8 pro lb
is the a way to make it work with a mecool ms8 pro lb ?

[S905X][9.0] atvXperience v4 - AndroidTV Pie

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Bringing you the latest release of atvXperience v4 - Pie for S905X!
atvXperience is an Android TV based ROM, with Google apps included and all exclusive atvXperience goodies (launcher, fonts, bootanimation, apps).
Our mission is to offer the maximum possible stability and security, along with essential features for the proper functioning of the device, not only that
we offer the best Android TV Experience to you, running on your Amlogic TV Box.
Based on AndroidTV 9.0
What's working?
Wi-Fi
Air mouse
Netflix
Amazon Prime
YouTube
Auto Frame-Rate
All Google TV Apps
Almost everything that doesn't need Widevine L1
Attention:
We don't force you to use our ROM. It's stable and can be used as a daily driver.
If you don't like something, please let us know.
The atvX team holds no responsibility if you brick or break your device.
KNOWN ISSUES:
idk, You tell me...
Download the Realtek/Broadcom Multi Wi-Fi version
Download the Ampak Wi-Fi version
Made by:
* bumerc
* acidice
A big thank you to the Freaktab and XDA Admin Team and the Amlogic Community for letting us share atvX with others.
and special thanks to everyone who contributed whatever they could.​
Nice ROM, Thanks Dev!
Do voice commands through G20S Air Mouse (or any other similar remote) work for anyone? For me, pressing the Mic button activates the voice command listening but my commands/speech/voice is not detected by the box (TX5-pro). I tested the remote on chromebook and the mic is detected without any problem.
thank for this rom I tink this is almost perfect. remote control app not working its pairing but noting is work just if app is open on the phone mic is working..
I wish this rom unrooted and remove some useless app more like stock android tv..
my device x96 q5x v.2.0 16293 when I was flash the rom first time its fail on %7 but when I try second time flashed perfectly..
---------- Post added at 10:39 AM ---------- Previous post was at 09:54 AM ----------
what is it for "SSH-Key-bundle.zip" and "readme_ssh_connect.md" files?
Will this rom working on a A95X Max v81 Android box .?
can this rom be installed from an SD card on a rooted BOX bqeel y8 max?
I flashed the rom to my Nexbox a95x (2/16 Gb version). It works but now I can't flash other images again because the box will not be recognized by amlogic burning tool anymore. There is no reset button with this box. The only way to get to recovery is to plug USB to pc after pressing start flashing from.
But this can't be done anymore. Now I'm stuck with this Rom.
pop4xda said:
I flashed the rom to my Nexbox a95x (2/16 Gb version). It works but now I can't flash other images again because the box will not be recognized by amlogic burning tool anymore. There is no reset button with this box. The only way to get to recovery is to plug USB to pc after pressing start flashing from.
But this can't be done anymore. Now I'm stuck with this Rom.
Click to expand...
Click to collapse
This issue was fixed in the recent releases and it shouldn't be happening.
You'll need to short circuit the NAND pins in order to flash it (it's really easy)
Read here:
https://forum.freaktab.com/forum/tv...-nand-short-reset-s905x-with-emmc-nexbox-a95x
Just touch the pins with a pen or something and insert USB, you'll then be able to flash the ROM.
mdz-22-ab?
TX5 pro chipset Qualcomm 9377, which version, pls?
Nice work !!!
Hi,
thanks for this, running well on my old M8sII box!
i am having some problems to install some of the UK catchup apps however, the only one i can get to install is 'My 5' none of the others show in the play store when searching on my device. if i locate them on my PC in the play store it suggests they are not supported on the device. is there any possibility to add support, so i can have them as channels on the homescreen with details of availabe shows, like i have on my Toshiba TV?
the apps in question are;
BBC iPlayer
ITV Hub
All4
CBS Catchup UK
UKTV Play.
Cheers!
Thanks for the ROM!
I instaled it on some noname S905x 2/16, works great!
One questions, how I can set up my own default launcher? I instaled some, then in default apps I have set it up as default Home app, but still atvX's launcher is default.
Is there a way to change to some other launcher being default?
EDIT
Just found out that the app drawer can't add all apps to favorites (youtube vanced). Another default launcher is an must have unless I am missing something?
zolee_ said:
Thanks for the ROM!
I instaled it on some noname S905x 2/16, works great!
One questions, how I can set up my own default launcher? I instaled some, then in default apps I have set it up as default Home app, but still atvX's launcher is default.
Is there a way to change to some other launcher being default?
EDIT
Just found out that the app drawer can't add all apps to favorites (youtube vanced). Another default launcher is an must have unless I am missing something?
Click to expand...
Click to collapse
Use smart youtube next beta ad free TV YouTube, to add NON TV apps to homescreen use a website to create shortcuts to non tv apps
Generator for ATV-Launcher Apps
This tool creates APK to launch sideloaded apps from the android tv leanback launcher.
atvlauncher.trekgonewild.de
Thanks, I will try this
how can I skip the gmail login or Im FORCED to login?
thanks for your work.
thecubasekid said:
Hi,
thanks for this, running well on my old M8sII box!
i am having some problems to install some of the UK catchup apps however, the only one i can get to install is 'My 5' none of the others show in the play store when searching on my device. if i locate them on my PC in the play store it suggests they are not supported on the device. is there any possibility to add support, so i can have them as channels on the homescreen with details of availabe shows, like i have on my Toshiba TV?
the apps in question are;
BBC iPlayer
ITV Hub
All4
CBS Catchup UK
UKTV Play.
Cheers!
Click to expand...
Click to collapse
Hi,
which file did you use? I flashed both aml_upgrade_package_ap6212.img and aml_upgrade_package_multiwifi.img on my Mini M8S II (2/16 GB, Wi-Fi chip AP6212), but remote and Wi-Fi are not working, had to revert to version v2FF.
P.S. I also tried Aidan's Custom ROM (V6, Ampak AP6212) and everything is working fine.
Do you plan to me your rom available on Amlogic S905 too ?
I would glady test it with a zip update (Amlogic Usb Burning Tool won't detect my device sorry)
Warrior66 said:
Hi,
which file did you use? I flashed both aml_upgrade_package_ap6212.img and aml_upgrade_package_multiwifi.img on my Mini M8S II (2/16 GB, Wi-Fi chip AP6212), but remote and Wi-Fi are not working, had to revert to version v2FF.
P.S. I also tried Aidan's Custom ROM (V6, Ampak AP6212) and everything is working fine.
Click to expand...
Click to collapse
Hi, you can try a couple of things, I have a mini m8sll and for ATVx I had to use ampak WiFi buildin (I have AP6212a chip) so you can try that one
thecubasekid said:
Hi,
thanks for this, running well on my old M8sII box!
i am having some problems to install some of the UK catchup apps however, the only one i can get to install is 'My 5' none of the others show in the play store when searching on my device. if i locate them on my PC in the play store it suggests they are not supported on the device. is there any possibility to add support, so i can have them as channels on the homescreen with details of availabe shows, like i have on my Toshiba TV?
the apps in question are;
BBC iPlayer
ITV Hub
All4
CBS Catchup UK
UKTV Play.
Cheers!
Click to expand...
Click to collapse
Thes apps are only available on Android TV devices from Nvidia, firesticks and devices with Freeview play, the apps on play store you are talking about are the phone versions not TV, bbc iPlayer I have a TV version that works of you would like a copy (I pulled the app from the new Chromecast)
aidanmacgregor said:
Hi, you can try a couple of things, I have a mini m8sll and for ATVx I had to use ampak WiFi buildin (I have AP6212a chip) so you can try that one
Click to expand...
Click to collapse
I Installed atvX-s905x_AP6XXX_buildin_v4.0.tar.xz and the WiFi now works fine, but the remote is not fully functional:
The repeat function is not enabled, so this is a problem when, for example, you have to scroll through a long list. Also, the "MOUSE" button, that should toggle between D-Pad and mouse, doesn't work.
Any suggestions on how to fix this issue?
Another question: I noticed that in several remote.conf files there is the parameter "repeat_peroid", should I rename it as "repeat_period" or it is better to leave it as is?

[v8] Aidan's ROM (MINIX NEO U22-XJ) [S922X] [Android TV 9] [Netflix TV] [Disney+] [Google Play Certified] [ROOT]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Home Screen With Apps
^^^NEW Home Screen, Update From Play Store ^^^
Preinstalled Apps
Initial Set Up Screen
Initial Set Up Screen 2
About
New Google Dream X Included
Google Play Protect Certified
Android TV Netflix! (Install Apk From Website)
Aidan's Custom Android TV 9 ROM For MINIX NEO U22-XJ
v8 New Features (25.July.2021)
BASED ON LATEST MI BOX Official Pie Build 3595
Security Patch 5.March.2021
Low Ram False All Roms
Forceencrypt Disabled
Default Volume MAX
New Bootanimation
More Debloating
DPI Set At 320/213
New Welcome (Thanks AcidIce18)
No Remote Pair Screen
More Cleaned & De Bloat
More Tweaks...
v7 New Features (29.April.2021)
BASED ON LATEST MI BOX Official Pie Build 3409
Security Patch 5.January.2021
NEW Mygica ATV495x (maybe more) Version Available
NEW F30UP (maybe more) Version Available
Now Includes App Drawer (Non Tv Apps)
Now Includes File Browser
Now 11 Wi-Fi Versions Available
Cleaned & De Bloat
More Tweaks...
Download
aidansrom.ml
Thanks MINIX for reaching out & sending me a box & remote to play with, as soon as i get the time i will be working on a Android TV rom for this device, Please comment if your interested in testing
Looking forward to the Android TV ROM
Update, Android TV booting, Tried with Mi Box Firmware but this has a freezing issue decoding wmv files, also tried mecool (km1) and MINIX Neo T5 ATV firmware, i will upload some testing versions soon
I did your firmware V4 but power will not turn off control will go up and down volume up and down but will not turn the box on and USB is not working s912 minix neo u9h can you fix USB on your firmware I did flash it but remote will not turn box off
antonio6o6 said:
I did your firmware V4 but power will not turn off control will go up and down volume up and down but will not turn the box on and USB is not working s912 minix neo u9h can you fix USB on your firmware I did flash it but remote will not turn box off
Click to expand...
Click to collapse
someone else reported only the usb c port worked, they used a OTG adaper to use minix USB remote
Testing Version Now Available
Aidan's ROM S922X - Google Drive
drive.google.com
will this work on Beelink GT-King?
The USB flash drive does not work, it can be recognized, but it indicates that the USB flash drive is damaged. But I don't know if it's an isolated case.
szkifen said:
The USB flash drive does not work, it can be recognized, but it indicates that the USB flash drive is damaged. But I don't know if it's an isolated case.
Click to expand...
Click to collapse
I think its broken NTFS, the same fix i tried before didnt seem to work, i still want to convert the stock firmware to android tv, this should result in far fewer bugs but not managed to get it working properly yet
Yo Aidan, I hope you're doing well. I'm considering to buy MINIX NEO U22-XJ and help you with testing. What is the current status for this device and what is the rom based on?
Cheers
p1trson said:
Yo Aidan, I hope you're doing well. I'm considering to buy MINIX NEO U22-XJ and help you with testing. What is the current status for this device and what is the rom based on?
Cheers
Click to expand...
Click to collapse
hi, it is an awesome device and stock firmware is solid and works very well with great video decoding capabilities, my rom is based on the stock firmware and mi box firmware port, means its always posible to return to stock, im learning as i go about all this
Hi Aidan. Does your version actually with on the u22? Also, is it capable of playing hd audio? (Dts-hd, dts-x) or aac 5.1/7.1 correctly?
aidanmacgregor said:
someone else reported only the usb c port worked, they used a OTG adaper to use minix USB remote
Click to expand...
Click to collapse
Yes I know OTG adaper is working I managed to maneuver firmware V7 s912 but still cannot turn on and off. Can you manage to do a little adjustment on your firmware.for The Minix Neo U9h s
sorry still some audio codec issues, but V8 is now available
There is a way to ROOT your firmware, it is only to install apps as if they were from the system, like YouTube and Google TV (or Google play movies in my region)
mekler22 said:
Hi Aidan. Does your version actually with on the u22? Also, is it capable of playing hd audio? (Dts-hd, dts-x) or aac 5.1/7.1 correctly?
Click to expand...
Click to collapse
i suspect there are going to be some audio decode issues, im still learning and is somthing im working on, i dont haveany surround sound to test on either so feedback would be needed
IoriYagami2001 said:
There is a way to ROOT your firmware, it is only to install apps as if they were from the system, like YouTube and Google TV (or Google play movies in my region)
Click to expand...
Click to collapse
i will have a rooting guide available soon
Root Guide Now Available
​
Hello Aidan;
First thank you for all your work , i successfully update an old Tanix T9( with your other rom).
I own a Odroid N2+ and i would like to test this version on it, but when i want to burn the .img with Etcher, it simply do not work and when i try the Amlogic Burning tool with OTG on the N2+, the device is not recognized.
It would be interesting for me because i currently use Voodik atv version (which works well) but without some codecs its difficult (e.g: Disney+ , 6play).
What can I do to make it testable?
Frodroid said:
Hello Aidan;
First thank you for all your work , i successfully update an old Tanix T9( with your other rom).
I own a Odroid N2+ and i would like to test this version on it, but when i want to burn the .img with Etcher, it simply do not work and when i try the Amlogic Burning tool with OTG on the N2+, the device is not recognized.
It would be interesting for me because i currently use Voodik atv version (which works well) but without some codecs its difficult (e.g: Disney+ , 6play).
What can I do to make it testable?
Click to expand...
Click to collapse
Hmm look like this device uses etcher to flash, i havent seem this before, if you can find some way to unpack the rom you have, take system.PARTITION, product.PARTITION ANd logo.PARTITION From my rom then replace in yours, rickys toolay work, not sure if odrood have a diffrent firmware format

Categories

Resources