Hi all,
so i have an issue with my p9000. There is a "dead" zone on my screen, it's about 1.5cm wide and covers the screen from left to right.
This part of the screen stopped working a few days ago, it's not responding to touch. Rest of the phone is fine, everything works as it should.
Can this be because of some wrong settings in screen size in rom or any other settings, or is the screen most likely dead ?
Seems like there is a faulty batch
I got that problem too.
Mine is on Eragon ROM and part of the screen is unresponsive in applications other than the Nova Luancer.
My device has the same issue. Try to zap repeatedly the dead part of the screen with a piezoelectric tool, such as a mosquito bite relief device or a lighter. Works form me, but it's only a temporary solution. The issue comes out again from time to time.
So it looks like a device issue then. Was hoping for software error.
i have the same problem. It is not software error unfortunately. Looks like a faulty batch to me too.
I use Eragon and was dealing with the same issue. Then suddenly it disappeared. After flashing an update it came back and then it disappeared again. Since then everything is fine
Ok, now this problem is permanent. I talked with Banggood and will send it back to the service.
So I've sent one email to elephone support department. They were offering me a 15$ discount. Was very surprised. Anyhow during further conversation they have agreed to fix the device. I will send it as soon as I get another device I can use daily.
Related
Hi,
My HTC is giving me problems. The screen has become yellowish.
Earlier the screen used to become yellowish for 5-10 mins and it used to occur in two weeks or so. But now the phone has permanently become yellowish. I am also attaching a picture along with this thread. As you can see, the areas in the pic which are bluish is showing the true color of the background. Rest of the screen is all yellowish.
Can someone help me with this problem.
Best regards,
MOhit Goyal
Looks like a faulty contact from your Motherboard to your screen (bad connector, bad flex-strip or something like that)
IMO you need to send it in for repairs.
I have had the same with my p3300, but was able to fix it myself (connector was not completely pressed down, had come loose)
Hardware problem?
Do you think this is a hardware problem?
Why I doubt that is because:-
1. Whenever I touch any place on the screen for opening an application, the area shows the actual color, but if I just touch the screen the colours doesn't change.
2. Usually the phone starts displaying the correct colours after a restart
Should I take chances and reset my phone or something?
I'm having the exact same problem every now & then (often occurs when I keep the phone in my jeanspocket) A light tap on the screen often helps. Had it in for repairs earlier, but they only re-flashed it (!) So the problem is not solved
What to do now?
I am not able to play any game. I hate looking at my phone. It makes me so angry.
How do I get it fixed. Its the fourth consecutive day with the wrong colours.
Someone please help.
Performed a hard reset but still not working properly
This is not happening. I performed a hard reset thinking that it might just work but it did not.
Can someone please help me here.
Of course it is a hardware fault. Send it in for repair - or repair it yourself
I think is a virus or something else, because has happened to many people lately.
I also had the issue as pictured above.....and exactly as described in the first post.
It began to occur about three weeks....and gradually was getting worse.
Its getting worse
Again I am doubtful that its a hardware problem.
Now, I am not even able to open anything on my phone. I keep getting thrown back to the main screen. No matter what I open, what application I am using, it just keeps throwing me back to the main menu.
In addition to that, even when I am not using the phone, it just keeps flashing. I lock it and the screen turns on again. Its like the phone is getting used every second.
I think its a virus. Does anyone know any anti virus solutions for HTC HD2?
Thanks,
Mohit Goyal
i got exactly the same problem - check my photos here http://forum.xda-developers.com/showthread.php?t=716002&page=2
i donth think it is a virus - why? - becase if it so the virus should go when you reflash the rom or flash a new rom - i douubt also about the virus but when install new rom the color issue still existig.
i sent my device to the dealer for repair and i will apdate you about the real reason when i got the answer from the dealer.
however, the same issue happened before to one of my friends and the device was out of warantee - he took it to a repair shop and they told him it is a kind of default in the mother board.
this time we will get dealer answer so lets wait.
thanks
a member in other forum advised me to use the attached cab which solve a similar issue in Blackstone.
but it is too late for me because i returned the device to the dealer
however- other member faced a similar issue and the dealer told him it a default in the motherboard.
Send in for repair......
accessmohit said:
Again I am doubtful that its a hardware problem.
Now, I am not even able to open anything on my phone. I keep getting thrown back to the main screen. No matter what I open, what application I am using, it just keeps throwing me back to the main menu.
In addition to that, even when I am not using the phone, it just keeps flashing. I lock it and the screen turns on again. Its like the phone is getting used every second.
I think its a virus. Does anyone know any anti virus solutions for HTC HD2?
Thanks,
Mohit Goyal
Click to expand...
Click to collapse
Listen to the others... You need to send phone in for repair... My phone use to flicker on and off to the point where I couldn't call or use.... I sent to be repaired and they replaced the mother board, but didn't fix my other problems (phone will not turn off and when u put in battery phone turns on on it's own)..... I would send in for repair.......................
htc contacted me an inform me that the reason was the motherboard
yea its the motherboard isue i droped mind and d screen has changd its colour to yelow blue and sometimes wnt wake up aftr remvng 4m poket.gave it htc repair center they said a socket or conector has a problm whch cnt be repaired and so mothrboard needs to b changed.motherboard cost 8000rupees/190dolars whch is **** expensive for repairing
I had this same problem and read on some other forum that you're supposed to "flex" the phone. So I bended my phone a little (the top and bottom backwards, be careful the screen also has glass in it) to try to get a bit of a curve in it and by god ...it worked!!!!! The screen flickered and then the yellow screen was gone!!! I'm so glad because I mailed Htc two days earlier and I still don't have a response from them. I hope it works for you
Just to confirm... The same thing happen to me its either (A) the cable from MOBO to Screen came loose usually by flexing or bending the phone which can happen in someones pocket. (B) the cable connector came loose by same methods (C) MOBO went bad usually by same methods. Either way one should it in for repairs or crack it open and see for your self.
I got same problem before, it happened when the screen is moist. it looks like there is an absorbent layer behind the screen which got damped. try drying it.....found article to contained the unit in a seal container with rice overnite for drying electronic gadgets, and see the result.remember to take off the battery. good luck.
Well I did it... Broke the screen a couple of weekends ago. Ordered and received a new one. (No problem and not too bad price-wise) Then I ordered the correct screwdriver. That came in yesterday and I followed a couple of tutorials online to take the thing apart. Not too bad despite the teeny-tiny parts. I got it back together and lo-it worked! Actually it took a couple of tries and I reflashed it but then it booted right up. All the apps seemed responsive and life was good once again...
Until I tried to make a call. Then the screen went dark and it appeared that the phone froze up. Called myself from the house phone and discovered that the Aria was dialing, connecting, and sending voice but that I couldn't hear anything on the Aria.
Disassembled, re-set the earpiece, reassembled, called myself again, and I could hear. The screen came on and stayed on, but the touchscreen would not function.
Disassembled, checked all the connections, and reassembled again. The phone appears to work correctly in all aspects until I try to make or receive calls. At that point the screen shuts down and the only way to disconnect a call (or get the screen back) is to pull the battery and reboot.
I tried reflashing the ROM and that didn't work. I'm afraid the transceiver is shorting the screen out somehow but have reached the limits of my expertise.
Any suggestions?
Thanks,
Jerry
I have never had to replace my digitizer so only speaking from what i have read but it sounds like the very small rubber piece that covers the proximity sensor. I have read that if missing or not placed correctly people have had the same problem as you. Just my thoughts
I've replaced my digitizer and I have had the exact same problem. E.Cardo is correct, it is the small rubber piece on the proximity sensor not positioned correctly or not present at all.
Thanks to both of you. The proximity sensor is supposed to be right behind the ATT logo, correct?
I can't wait to get home and try this. I really don't like the backup Cliq Xt... I'll post once I've messed with it.
gdgeorge said:
The proximity sensor is supposed to be right behind the ATT logo, correct?
Click to expand...
Click to collapse
It's hard to see them exactly so I took a picture to show exactly where they are:
http://imgur.com/a/36h8t#ayQhv
It's actually just above the & in the at&t logo, although if you have a replacement digitizer, it might not have the at&t logo on it. If you have trouble seeing it, try looking at it in the sunlight.
To add to what drumist said there as small black rubber piece that goes around the proximity sensor that prevents light seepage and allot of people discard it by mistake when disassembling the phone.
Sent From Deep Within The Rabbit-Hole
Why did you have to reflash? The new screen didn't worked?.
My aria's screen is broken too. I boutgh a new one but It doesn't work. Do you resolve this reflashing? (that's mean applying the new rom version from ATT)
Thanks for your response.
javierarenas said:
Why did you have to reflash? The new screen didn't worked?.
My aria's screen is broken too. I boutgh a new one but It doesn't work. Do you resolve this reflashing? (that's mean applying the new rom version from ATT)
Thanks for your response.
Click to expand...
Click to collapse
The screen or digitizer are hardware they should have nothing to do with the rom. The op only tried flashing the phone to illuminate it is a possible source of the problem. It sounds like you did not install the new screen or digitizer correctly you may need to disassemble and make sure everything is connected correctly and securely. Flashing your phone will most likely not correct your problem.
Sent From Deep Within The Rabbit-Hole
Maybe, just maybe, there are new drivers for the touchscreen included in the rom. I am using cyanogen 7.0.3 without problems, and it works nice with the old screen.
Or the new screen is defective.
I am pretty sure I installed correctly the new screen. Of course the old one is working fine right now.
I requested a new screen so I will wait...
Thanks again.
So I made the jump from Android (Nexus One) to the Radar and I really like it so far!
I do, however, have an issue with the phone that I am wondering if anyone else has noticed.
I have noticed that sometimes when I go to touch a tile(or other UI object)...if I quickly touch it, it seems that the screen doesn't always detect my touch. Sometimes I'll even hit it a couple of times before it responds.
The behavior is inconsistent though. After it smartens up and responds to my touch, then it seems to detect it fine. It's squirrelly and a little disconcerting.
I also think that the region of the screen might have something to do with it. The tile 2nd from the top on the home screen ("messaging" in my case) seems particularly susceptible to this problem.
Has anyone else noticed this? I'm a little paranoid because I bought this phone "new" from someone on CL and when I took it home I realized it was a refurbished model.
I had this problem when I had my 7 Pro. After a while it got worse, as I had to put the phone on standby and then turn it on again to be able to use the screen. I sent it in to HTC for repair, and they swapped the entire front panel with a new one.
Im having the same problem with my sprint arrive I think the problem is related to what is in this thread:
http://forum.xda-developers.com/showthread.php?t=1239238&page=7
but I still cant seem to get it to work
I just got done replacing my broken screen on my LG G3. I replaced the whole front panel and just transfered the guts. Everything checked out fine after replacement until i typed my first text message. row A-L will not goto screen unless I touch nearly inbetween the middle of the row beneath it. q-p work fine as well as z-m. What really has me boggled is that the screen accepts touches there in virtually every other app/drawing. Just the keyboards aren't allowing touch in that specfic row. any suggestion?
Found a few more bad section.. Pulled the back loudspeaker back out and tried reseating the cables and still had same issue. They're sending a replacement for free.
This was my first screen replacement, but not my first time dealing with small ribbon cables. All cameras function fine, hoping it was a defect in screen and not my screen changing abilities.. Any tips for the next one would be appreciated. Would like to have a fully functioning phone again sometime. This is nearly more frustrating than the broken screen.
I am having same Issue
steber04 said:
Found a few more bad section.. Pulled the back loudspeaker back out and tried reseating the cables and still had same issue. They're sending a replacement for free.
This was my first screen replacement, but not my first time dealing with small ribbon cables. All cameras function fine, hoping it was a defect in screen and not my screen changing abilities.. Any tips for the next one would be appreciated. Would like to have a fully functioning phone again sometime. This is nearly more frustrating than the broken screen.
Click to expand...
Click to collapse
Hey just curious if your issue has been resolved.... I am having same issue, but i took mine to a computer store i have been dealing with for years. about a year ago they started doing cell phone repairs as well. I had them replace my cracked screen on my LG G3 and that same row of text if off for me and there are a few other spots i have noticed are off as well .... very frustrating... Anyway the place I took it to has replaced 3 screens hoping they were getting defective parts.... they just called to tell me I can come get it but they were unable to repair the dead spots without going further into replacing boards or something.... I dont know... It is weird though cause you can get the dead spots to work sometimes by very lightly touching or just touching it in just the right spots like a calibration if off....
thomas020476 said:
Hey just curious if your issue has been resolved.... I am having same issue, but i took mine to a computer store i have been dealing with for years. about a year ago they started doing cell phone repairs as well. I had them replace my cracked screen on my LG G3 and that same row of text if off for me and there are a few other spots i have noticed are off as well .... very frustrating... Anyway the place I took it to has replaced 3 screens hoping they were getting defective parts.... they just called to tell me I can come get it but they were unable to repair the dead spots without going further into replacing boards or something.... I dont know... It is weird though cause you can get the dead spots to work sometimes by very lightly touching or just touching it in just the right spots like a calibration if off....
Click to expand...
Click to collapse
A review on G3 LCD's on Amazon reports the same problem "I installed the screen and immediately my wife mentioned that it seemed to have "dead spots" when she was texting / playing games. I noticed it myself when I tried texting myself as a test. Several of the letters on the keyboard just wouldn't register very well. She went into the settings and ran the "motion sensor calibration" test under general settings>gestures. This has resolved the touch screen issues. "
I don't see how that would fix it but I guess it's worth a shot.
I bought a Mate 20 Pro on preorder and noticed within a few days a seemingly non-responsive part of the screen that was an intermittent issue.
Basically every now and again (often enough it’s annoying but not every time) after I unlock the display I am unable to select any app icons in the lower half of the touchscreen. The top half is fine - the home buttons are fine but everywhere from the middle down is non responsive.
I assumed a hardware fault so amazon replaced it for me - and the new device is exactly the same!
Am I just super unlucky and have managed to get two faulty devices a month apart from Amazon or is something else causing the issue?
Thanks.
Think you've just been unlucky,nothing like that on mine
Fine here too. I assume you tested this as soon as you got the phone before installing any app / custom launcher?
Have you tried running smart diagnostic tests manual mode in hicare, there's a touchscreen display test.
Sent from my HUAWEI LYA-L09 using XDA Labs
I only noticed it in use after I used a custom launcher however I tried multiple launchers and saw the same behaviour.
I just did the HiCare test and it says normal. I did hard reset it the other day and it hasn’t happened since so I will see if anything else happens. I can’t say I am thrilled by the thought of another swap from amazon if it does happen. That’s super bad luck.
Hi how did it go after the hard reset?
I got the same issue myself but instead of being the lower half, my entire screen does not respond to touch. I've done a hard reset my self and i do run the stock launcher. Even though my screen still doesn't respond to touch now and then after unlocking the screen or receiving a phone call.
Touchscreen issue
Yup I get it annoyingly so as well! Often takes a "double tap". Pain in the ace!