I was playing around with the Ubislate 7ci tablet, which is basically a generic Android tablet with stock ICS. Since it is not supported well, I went thru multiple documents and rooted it, After a lot of tries installed ClockWorkMod 4 too and took a backup. But after that I went one too far and installed ClockWorkMod touch 6, which pushed my system in to a bootloop. I am not able to go to recovery, adb / fastboot is not recognizing my tablet.
I tried writing the boot.img and recovery.img to SD card using win32diskimager, but the tablet is not booting from the SD card.
I have the backup files from ClockWorkMod and a tablet which bootloops (not able to go in to recovery or adb/fastboot). Is there a chance of reviving the tablet?
Ubislate 7ci soft bricked
I read a lot of threads (inside and outside of XDA) and all of them suggest using fastboot / recovery, which is not working for me or suggest to flash a firmware. I don't have the correct firmware, so I have downloaded a img file for another China tablet with ICS, just searching more before trying that, since that could hard brick my tablet.
I have also analyzed what I did wrong and I could see that the clockworkmod touch img file is moved to /dev/block/nandg, which should only affect recovery and should not affect normal boot-up. I have left my tablet to discharge to see whether rebooting after discharge goes directly to nanda.
If you have any suggestions to try out, it is much appreciated.
need help got ubislate 7ci in dec12 with bootloop problem pl advice how to flash/bric
need help got ubislate 7ci in dec12 with bootloop problem pl advice how to flash/brick whatever applicable my friend got a working 7ci how can i copy his rom &load in my 7ci using flash/brick
on long pressing power+vol up a green android logo comes up& no key works& system hangs.
can i reset android using key board if so pl help.
vinweb said:
need help got ubislate 7ci in dec12 with bootloop problem pl advice how to flash/brick whatever applicable my friend got a working 7ci how can i copy his rom &load in my 7ci using flash/brick
on long pressing power+vol up a green android logo comes up& no key works& system hangs.
can i reset android using key board if so pl help.
Click to expand...
Click to collapse
I have a Ubislate 7C+ - Have you tried doing a factory reset? There's a tiny hole on the back of the tablet for it.
Are you able to get in to fastboot
vinweb said:
need help got ubislate 7ci in dec12 with bootloop problem pl advice how to flash/brick whatever applicable my friend got a working 7ci how can i copy his rom &load in my 7ci using flash/brick
on long pressing power+vol up a green android logo comes up& no key works& system hangs.
can i reset android using key board if so pl help.
Click to expand...
Click to collapse
My 7ci did not go in to a fastboot mode :crying:. If you can get in to fastboot mode, you can try flashing CWM recovery and restore a CWM backup taken from your friend's machine. I have attached the version of CWM which worked for me and as always NO GUARANTEES. USE IT AT YOUR OWN DISCRETION.
FYI - Fastboot was NOT working in my Ubislate, I was able to get adb working ROOTING your Ubislate 7ci
If it is not too much trouble send it back to datawind ([email protected])
Cyber-Logic said:
I have a Ubislate 7C+ - Have you tried doing a factory reset? There's a tiny hole on the back of the tablet for it.
Click to expand...
Click to collapse
I don't think there is a reset button in Ubislate 7ci. All I see is a hole for the mic.
Success
srinivask82 said:
If it is not too much trouble send it back to datawind ([email protected])
Click to expand...
Click to collapse
I sent the TAB back and they fixed the tab and sent it back :victory:
ROM
Found this ROM
havent tried myself yet
http://forum.gsmhosting.com/vbb/f606/ubislate-7ci-working-rom-found-1682115/
asrinivask82 said:
I read a lot of threads (inside and outside of XDA) and all of them suggest using fastboot / recovery, which is not working for me or suggest to flash a firmware. I don't have the correct firmware, so I have downloaded a img file for another China tablet with ICS, just searching more before trying that, since that could hard brick my tablet.
I have also analyzed what I did wrong and I could see that the clockworkmod touch img file is moved to /dev/block/nandg, which should only affect recovery and should not affect normal boot-up. I have left my tablet to discharge to see whether rebooting after discharge goes directly to nanda.
If you have any suggestions to try out, it is much appreciated.
Click to expand...
Click to collapse
Hope your issues are solved, can I have your CWM backup.img, my Ubislate 7ci is softbricked. Please help.
Try this
chirag.here said:
Hope your issues are solved, can I have your CWM backup.img, my Ubislate 7ci is softbricked. Please help.
Click to expand...
Click to collapse
The clockworkmod image which worked for my 7Ci and few 7C+ (based on the reply to this thread), can be found in the following thread in the second post. Best of luck... :fingers-crossed:
Successfully Rooted Ubislate 7ci and installed ClockWorkMod
srinivask82 said:
The clockworkmod image which worked for my 7Ci and few 7C+ (based on the reply to this thread), can be found in the following thread in the second post. Best of luck... :fingers-crossed:
Successfully Rooted Ubislate 7ci and installed ClockWorkMod
Click to expand...
Click to collapse
cwm that I have works well with my 7ci. I need a system backup of your ubislate which u did with your cwm.. Plz help if u can..
srinivask82 said:
I was playing around with the Ubislate 7ci tablet, which is basically a generic Android tablet with stock ICS. Since it is not supported well, I went thru multiple documents and rooted it, After a lot of tries installed ClockWorkMod 4 too and took a backup. But after that I went one too far and installed ClockWorkMod touch 6, which pushed my system in to a bootloop. I am not able to go to recovery, adb / fastboot is not recognizing my tablet.
I tried writing the boot.img and recovery.img to SD card using win32diskimager, but the tablet is not booting from the SD card.
I have the backup files from ClockWorkMod and a tablet which bootloops (not able to go in to recovery or adb/fastboot). Is there a chance of reviving the tablet?
Click to expand...
Click to collapse
Hey could you please upload your backup files here for others?
want rom for the ubislate 7cz im helpless
plz help me in gettng rom for my ubislate 7cz its an earnest rrquest plz help!
Sorry if this is in the wrong thread, not sure where to put it,
I own a NATPC M009s x2.
I rooted it today and was hoping to install the cwm.
I had to install the driver manually so i tried to install it through the recovery mode
However after I did this the device wouldnt boot up past the boot logo and im not too sure what to do.
Unfortunately this is a soft bricked device now. You can either try to use ADB to attempt rebooting into recovery.
EDIT: If you do not have cwm successfully flashed, (this is based off of previous experience) there is no way to fix this. Please correct me if I am wrong, I rooted my first phone and factory reset it through the stock rom without a recovery. Sent the phone into a boot loop. I did write a program (Mango Tools) to help fix this however, it can be found on mellowdev.net It is being updated atm but wouldnt mind emailing it to you if you PM me.
Sent from my Nexus 4 using xda premium
Help!! my Dell venue Got Bricked. i installed a custom rom and it run successfully. I changed my font then rebooted my phone then suddenly i got stuck in boot logo. I tried to reformat it and nothing happened. Please help me how to unbrick my phone. I havent unbrick any phone this is my first time. Im begging guys my phone is rooted.
Try to reflash the rom by booting into recovery.
Sent from my Dell Venue using xda premium
dell venue custom ROM installation
I want to Flash my Dell venue with CM9 custom ROM . I downloaded the ROM and tried to flash it, But i`m getting a error the Encrypting failed. Can anybody help me with the complete flashing guide.
Thanks in Advance
Even I bricked my Dell Venue, Now I am stuck on SW Upgrade from update.pkg screen it doenst go beyond this. I tried flashing custom recovery, dell recovery using fastboot.
I have installed custom CM9 from following link
http://forum.xda-developers.com/showthread.php?t=2002361
It was working fine but I wanted to update libs.zip so I can able to use internet over this phone. Now not able to flash it.
Any help?
Hello Guruj,
Any help? please :crying::crying::crying:
Hi guys, a long time browser, first time poster!
Star N9500, MTK6589
After an age trying to find a rooting solution that actually worked (vroot), for recovery I was advise to flash CRT 2.1 using MobileUncle Tools. It said it installed then rebooted my phone.
Alas now I am unable to boot into any recovery at all, Stock or CRT. I can only boot into Factory Mode, which doesn't seem too useful or user friendly and I can still boot my phone into Android.
If anyone can point my in the right direction to sorting this out I'd be very grateful. I'm pretty new to this flashing thing, but managed to unlock, root and flash my Nexus 7 without any issues!
Many thanks
No worries guys I sorted it.
Used this guide to flash CWM recovery automatically using MTKDroid Tools
Thanks anyway!!
Hi, I have a rooted Dell Venue 10 7040. I accidentally deleted the system data in TWRP and now it cannot boot up due to no OS. Anyone can help me fix this? Thanks!
Anyone with a rooted Dell 7040? Could you go into TWRP, backup your system image file and send me please? My dell cannot boot now, the TWRP menu said "No OS Install! Are you sure you wish to reboot?"