flash cm13 without rooting.. can i ????.. - LeEco Le Max 2 Questions & Answers

hellow everyone i have le max 2 x821 indian version, thats highly encrypted,..
i tried to root and unlocked the bootloader..
installed twrp successfully, but the encryptions not allowing to twrp to mount internal storage data,
i tried installing supersu through sideload but didnt worked the rooting is being prevented by encryptions as it shows there..
so , i cant root but i badly want to inatall cm13 on my device can i do that by using sideload without rooting as bootloader is opened.... will it affect my device if i try doing that.... please people help...:crying::crying::crying:

You need to erase the internal storage to have it decrypted. After installation of indian ROM, the phone's internal storage becomes encrypted. In order to decrypt it back, make sure you save everything from your phone inside a computer, then in TWRP, erase/format the internal storage, copy the new ROM that you want to flash via TWRP (you won't have any system installed so you can't reboot otherwise you'll endup in some bootloop). You can Enable MTP to see the device in computer. After you have copied the new ROM, flash it and enjoy. This is my experience on X820 after flashing indian ROM, so I'm not very sure if all described above will work on X821 but you can give it a try. If you brick your device, there is a fix for hard brick as well, so, no worries.

problem decrypting..
I tried it by doing format system.. but it didn't got decrypted... N everything remained same...

nikeshcfri said:
I tried it by doing format system.. but it didn't got decrypted... N everything remained same...
Click to expand...
Click to collapse
In TWRP you need to press "Wipe", then "Advanced Wipe" and select "Inernal Storage", then swipe to wipe. Do note that everything on your phone will be erased, contacts, photos, music, etc. Wiping only system won't decrypt anything.

not working..
valy_cta said:
In TWRP you need to press "Wipe", then "Advanced Wipe" and select "Inernal Storage", then swipe to wipe. Do note that everything on your phone will be erased, contacts, photos, music, etc. Wiping only system won't decrypt anything.
Click to expand...
Click to collapse
i booted into twrp then selected wipe->advanse wipe-> internal storage and then swiped to wipe,..
then it showed wipe failed unable to mount something...

Try to check in Mount and see if you can change something that can help.
Also someone with X821 maybe can help in this matter.

i tried that didn't help..
Can anyone give me link to stock recovery, this twrp is not functioning n hindering my upgrade to 19s also... I want to have my stock recovery back anyone please give me img file of that...

nikeshcfri said:
i booted into twrp then selected wipe->advanse wipe-> internal storage and then swiped to wipe,..
then it showed wipe failed unable to mount something...
Click to expand...
Click to collapse
Try this command in fastboot
Fastboot format user data
Then
Fastboot reboot
Sent from my Nexus 6P using XDA-Developers mobile app

valy_cta said:
If you brick your device, there is a fix for hard brick as well, so, no worries.
Click to expand...
Click to collapse
Hello,
Wolud you be so kind and share some link/info about this solution?
regards Filozof71

boot loop??
If u got into bootloop with a blue dot and phone restarting again and again, simply go into twrp and flash any of the official eui 15s 16s 19s Roms by wipe and install zip.

Related

help! i am running out of storage space after messing up with twrp partitions

helo buddies!!
i am using RN3 snapdragon version.
i unlocked bootloader and installed TWRP and flashed CM13
after rebooting , i observed it was unstable, so i did "factory reset in twrp".
thats what created everything..then there was no OS to reboot!! somehow
i installed AOSP ROM and rebooted it, But soon after rebooting within minutes storage space is going to kilobytes!!!
i rebooted many times and there was no change.
everytime after wiping cache and data in twrp, storage space is reaching to 25gb and in minutes it is falling to kilobytes.
should i repair system storage to FAT ?
help me
kiranbalumuri said:
helo buddies!!
i am using RN3 snapdragon version.
i unlocked bootloader and installed TWRP and flashed CM13
after rebooting , i observed it was unstable, so i did "factory reset in twrp".
thats what created everything..then there was no OS to reboot!! somehow
i installed AOSP ROM and rebooted it, But soon after rebooting within minutes storage space is going to kilobytes!!!
i rebooted many times and there was no change.
everytime after wiping cache and data in twrp, storage space is reaching to 25gb and in minutes it is falling to kilobytes.
should i repair system storage to FAT ?
help me
Click to expand...
Click to collapse
Some images would be very nice. Plus give some more detailed description as to what is happening. What do you see in twrp, device etc.
First of all, clean flash a miui rom via miflash and select format data and storage....
After you're done, check if the problem persist and unlock your bootloader again....
archit.bajpai.ab said:
Some images would be very nice. Plus give some more detailed description as to what is happening. What do you see in twrp, device etc.
Click to expand...
Click to collapse
before wiping cache =>
https://picasaweb.google.com/110214557234116688113/6301271067847757489?authkey=Gv1sRgCP6UtIKs0rOMvQE#6301271066136491330
afeter wiping cache=>
https://picasaweb.google.com/110214557234116688113/6301271067847757489?authkey=Gv1sRgCP6UtIKs0rOMvQE#6301271971483040738
kiranbalumuri said:
before wiping cache =>
https://picasaweb.google.com/110214557234116688113/6301271067847757489?authkey=Gv1sRgCP6UtIKs0rOMvQE#6301271066136491330
afeter wiping cache=>
https://picasaweb.google.com/110214557234116688113/6301271067847757489?authkey=Gv1sRgCP6UtIKs0rOMvQE#6301271971483040738
Click to expand...
Click to collapse
Alright. First install and flash twrp from official site.
Then go to wipe, advance wipe, and then click on repair file system. Give me snapshot of data cache and system from it.
archit.bajpai.ab said:
Alright. First install and flash twrp from official site.
Then go to wipe, advance wipe, and then click on repair file system. Give me snapshot of data cache and system from it.
Click to expand...
Click to collapse
here on,
i flashed official TWRP ,
and repaired data, cache,system but nothing changed
kiranbalumuri said:
here on,
i flashed official TWRP ,
and repaired data, cache,system but nothing changed
Click to expand...
Click to collapse
Your data partition seems to be fine in twrp. Try some partition info apps to check whether its system problem or something else.
But i can tell you, your partition table is fine. If you can try flashing a fastboot rom via miflash in edl mode.
I have encountered this problem last week, what I did was by formatting /data via TWRP (the one which including internal storage) and it gets fixed!
Sent from my Redmi Note 3 using XDA Labs

Hard Bricked s9+ (NEED HELP)

Hey,
I hard bricked my phone.
I had installed magisk and xposed. I uninstalled xposed because of snapchat. Now magisk is unistall, too. I don't know why..
Oem is locked. Twrp is not able to mount system. What can i do now? Need help!!!!
I was trying to restore but doesn't work. I made a factory reset. Now, is no OS installed..
Hope you have a nice day
CloudOneX said:
Hey,
I hard bricked my phone.
I had installed magisk and xposed. I uninstalled xposed because of snapchat. Now magisk is unistall, too. I don't know why..
Oem is locked. Twrp is not able to mount system. What can i do now? Need help!!!!
I was trying to restore but doesn't work. I made a factory reset. Now, is no OS installed..
Hope you have a nice day
Click to expand...
Click to collapse
Its not a hard brick, its a soft brick.
You need to download the original firmware file and flashed with Odin.
Try this
Download the correct firmware for your phone
Go to sammoble for firware
Download Odin for Samsung
Make sure phone is at least 50 percent charged
Put phone into download mode
But is it normal that oem unlock not blue? So there stands only that its already unlocked..
So THANKS to you!!!
CloudOneX said:
But is it normal that oem unlock not blue? So there stands only that its already unlocked..
Click to expand...
Click to collapse
yes, Its normal.
When you unlock it ( became blue ) then your boot loader is unlock and you can flash custom recover and custom rom as well.
But why i had the problem that twrp can't mount system? Do i have to unlock oem after flash, too? But at the first time, twrp was able to mount it... ?
CloudOneX said:
But why i had the problem that twrp can't mount system? Do i have to unlock oem after flash, too? But at the first time, twrp was able to mount it... ?
Click to expand...
Click to collapse
unlock OEM then boot into download mode
Flash recovery.
Wipe data and internal storage
Then flash custom rom
So now whe n i flash twrp, twrp isn't abel to mount all data (system, data, and so on)
Tough luck my friend, shouldn't have rooted your phone and why did you, root isn't needed anymore, 2 or 3 years ago maybe but not now. Maybe contact Samsung and tell them what's happened lol.
CloudOneX said:
So now whe n i flash twrp, twrp isn't abel to mount all data (system, data, and so on)
Click to expand...
Click to collapse
because twrp cannot decrypt Samsung's data, the only way it can is doing a format data, that means deleting everything to be able to write and mount data afterwards because the new data will be uncrypted, reason why before playing with root and twrp you need to backup all your stuff, once it is gone, there is no way back. So read a lot before playing with phones and their OS
Sent from my SM-G930F using XDA-Developers Legacy app
wegiwegi said:
because twrp cannot decrypt Samsung's data, the only way it can is doing a format data, that means deleting everything to be able to write and mount data afterwards because the new data will be uncrypted, reason why before playing with root and twrp you need to backup all your stuff, once it is gone, there is no way back. So read a lot before playing with phones and their OS
Sent from my SM-G930F using XDA-Developers Legacy app
Click to expand...
Click to collapse
I had a backup.. but before that all.. twrp was not able to restore it.. so after flash oruginal firmware via odin, my phone was reseted..
well, now you mention you had a backup, did you check the day the backup was made, that it was successfull? I guess, maybe the data partition is still good? so you could get your stuff back
I had once a twrp back that fail to restore 3 times, but at the 4th it went through ok.
Sent from my SM-G930F using XDA-Developers Legacy app

I have messed up my Kenzo pretty bad and now i dont have any recovery or fastboot.

So i was happy using a kenzo with unlocked (unofficially) bootloader.
i had followed this guidehttps://forum.xda-developers.com/redmi-note-3/how-to/unlock-unofficially-install-zcx-twrp-t3586778
So i had not rooted the device but just unlocked to use lineage os 14.1
i wanted to record internal audio and so tried to root with magisk. i took a backup using TWRP ZCX on an OTG USB.
successful!
now i installed iFont and installed a font.
this font made some problem in my status bar. there was some extra space above the clock, battery and all.
so whenever an app issued a notification, it crashed. even the system crashed continously.
so i decided to restore my backup.
i wiped my existing data in twrp
but the back up was successfully restored and upon system boot i saw "unsuccessful decryption." upon clicking restart, my phone would flash the TWRP ZCX logo and restart itself landing me again on "unsuccessful decryption."
so i went back to recovery and saw that could not mount /data.
so i did this:
My solution is simples. but you will LOSE EVERY FILE on userdata.
Step 1: Install TWRP
Step 2: Go to Wipe box
Step 3: Select Advanced Wipe
Step 4: Check "DATA" and tap on "Repair or Change File System".
Step 5: Tap Change File System
Step 6: See original format on file system (In my S6 is EXT4). So turn to other and switch back to original
Now /data is mounted back.
from https://forums.androidcentral.com/t...y-e-failed-mount-data-invalid-argument-2.html
It helped and i could mount /data
but then upon another restore i saw the same "unsuccessful decryption."
i read somewhere that a format will wipe all encryption and i thought it might help.
i formatted all the boxes (including data, internal storage and system)
then did a system restart from TWRP
now im stuck with mi logo and i am unable to enter fastboot and recovery.
HELP ME!
h8ed1 said:
So i was happy using a kenzo with unlocked (unofficially) bootloader.
i had followed this guidehttps://forum.xda-developers.com/redmi-note-3/how-to/unlock-unofficially-install-zcx-twrp-t3586778
So i had not rooted the device but just unlocked to use lineage os 14.1
i wanted to record internal audio and so tried to root with magisk. i took a backup using TWRP ZCX on an OTG USB.
successful!
now i installed iFont and installed a font.
this font made some problem in my status bar. there was some extra space above the clock, battery and all.
so whenever an app issued a notification, it crashed. even the system crashed continously.
so i decided to restore my backup.
i wiped my existing data in twrp
but the back up was successfully restored and upon system boot i saw "unsuccessful decryption." upon clicking restart, my phone would flash the TWRP ZCX logo and restart itself landing me again on "unsuccessful decryption."
so i went back to recovery and saw that could not mount /data.
so i did this:
My solution is simples. but you will LOSE EVERY FILE on userdata.
Step 1: Install TWRP
Step 2: Go to Wipe box
Step 3: Select Advanced Wipe
Step 4: Check "DATA" and tap on "Repair or Change File System".
Step 5: Tap Change File System
Step 6: See original format on file system (In my S6 is EXT4). So turn to other and switch back to original
Now /data is mounted back.
from https://forums.androidcentral.com/t...y-e-failed-mount-data-invalid-argument-2.html
It helped and i could mount /data
but then upon another restore i saw the same "unsuccessful decryption."
i read somewhere that a format will wipe all encryption and i thought it might help.
i formatted all the boxes (including data, internal storage and system)
then did a system restart from TWRP
now im stuck with mi logo and i am unable to enter fastboot and recovery.
HELP ME!
Click to expand...
Click to collapse
Don't go to advanced wipe. Selecting parttions doesnt format it. It only wipes.
Wipe and format are 2 diiffrent commands.
There is an option called format data in twrp. Click format data and type " yes " to format data. It will decrypt the data and internal storage.
First format data (must do)
Then wipe data reset
Flash rom
Flash gapps
Reboot
naik2902 said:
Don't go to advanced wipe. Selecting parttions doesnt format it. It only wipes.
Wipe and format are 2 diiffrent commands.
There is an option called format data in twrp. Click format data and type " yes " to format data. It will decrypt the data and internal storage.
First format data (must do)
Then wipe data reset
Flash rom
Flash gapps
Reboot
Click to expand...
Click to collapse
But i cant go to recovery or fastboot!
so im stuck with MI logo!
h8ed1 said:
But i cant go to recovery or fastboot!
so im stuck with MI logo!
Click to expand...
Click to collapse
Fastboot mode
press volume down + power
release the both button immediatelely with the vibration.
Get to FastBoot
Now use the following commands.
" fastboot format system "
" fastboot format userdata "
" fastboot erase recovery " (optional)
Now...
Install TWRP & Flash Stock Rom.
naik2902 said:
Fastboot mode
press volume down + power
release the both button immediatelely with the vibration.
Click to expand...
Click to collapse
Thanks i have successfully installed TWRP ZCX.
now how should i flash lineage?
Should i follow my same method i used the first time?
h8ed1 said:
Thanks i have successfully installed TWRP ZCX.
now how should i flash lineage?
Should i follow my same method i used the first time?
Click to expand...
Click to collapse
I dont know zcx is updated or not
Install latest twrp 3.2.3 coz of some bug fixes for oreo.
I prefer aosp extended official oreo
First Format data must do to decrypt
Then Wipe data reset
Flash rom
Flash latest august open gapps pico or nano
Reboot
Sent from my kenzo using XDA Labs

Pocophone F1 no os after sideloading going wrong

Hey all, so it appears that I screwed my phone, I am not sure how.
I was running LineageOS, and wanted to update to Android 10 one, so I followed the steps, and I think I screwed the sideloading part, so... long story short now when rebooting from OrangeFox RecoveryProject it says no OS detected, and when it boots it says encryption unsuccessful, I tried wiping and installing DisableForceEncryption_Treble_v17.2 and restarting, and the same thing happens.
I tried to flash through recovery both, and did not work:
https://xiaomifirmwareupdater.com/firmware/beryllium/
https://xiaomifirmwareupdater.com/archive/vendor/beryllium/
And when trying to flash through miFlash it doesn't work:
I go to fastboot in poco, hit refresh in miflash, it shows a device in the list, but the phone goes dark with 'something key to shutdown` written in the top left corner and if I hit the flash button nothing happens.
Can anyone assist with that please?
kishikaisei said:
Hey all, so it appears that I screwed my phone, I am not sure how.
I was running LineageOS, and wanted to update to Android 10 one, so I followed the steps, and I think I screwed the sideloading part, so... long story short now when rebooting from OrangeFox RecoveryProject it says no OS detected, and when it boots it says encryption unsuccessful, I tried wiping and installing DisableForceEncryption_Treble_v17.2 and restarting, and the same thing happens.
I tried to flash through recovery both, and did not work:
https://xiaomifirmwareupdater.com/firmware/beryllium/
https://xiaomifirmwareupdater.com/archive/vendor/beryllium/
And when trying to flash through miFlash it doesn't work:
I go to fastboot in poco, hit refresh in miflash, it shows a device in the list, but the phone goes dark with 'something key to shutdown` written in the top left corner and if I hit the flash button nothing happens.
Can anyone assist with that please?
Click to expand...
Click to collapse
This happened to me when I accidentally deleted the OS when flashing the latest MIUI 11 build (using TWRP). THIS IS HOW I FIXED IT.
Find a full firmware of whatever you wanted to flash, either Lineage or MIUI 11. Then flash via your recovery (you said you have orangefox). Use an external sd card, external USB or HDD since you technically wouldn't have access to your internal data. After flashing, same process as most updates, clear cache and dalkiv. Then flash a newer DFE (if you still want to decrypt, there is a page here in xda with it. Or go to miui forums Happybuddhist, the mod there, made a new one prebuilt with Magisk). Then reboot into recovery to make sure you keep your custom recovery. Once booted to recov. Boot to system. Should fix the issue.
You could check my guide here on how to unbrick your pocophone:
https://forum.xda-developers.com/poco-f1/how-to/unbrick-flashing-stable-rom-pocophone-t3901152
mecoromeo said:
This happened to me when I accidentally deleted the OS when flashing the latest MIUI 11 build (using TWRP). THIS IS HOW I FIXED IT.
Find a full firmware of whatever you wanted to flash, either Lineage or MIUI 11. Then flash via your recovery (you said you have orangefox). Use an external sd card, external USB or HDD since you technically wouldn't have access to your internal data. After flashing, same process as most updates, clear cache and dalkiv. Then flash a newer DFE (if you still want to decrypt, there is a page here in xda with it. Or go to miui forums Happybuddhist, the mod there, made a new one prebuilt with Magisk). Then reboot into recovery to make sure you keep your custom recovery. Once booted to recov. Boot to system. Should fix the issue.
Click to expand...
Click to collapse
I tried that, now I am a step forward I think, I flashed the stock firmware I found, and installed the latest stock ROM, rebooted (doesn't say no os anymore), but the only thing I see is a DELETE ALL DATA button and at the bottom 'Encryption was interrupted and can't be completed. As a result, the data on your phone is no longer accessible.
To resume using your phone, you need to perform a factory reset. When you set up your phone after the reset, you'll have an opportunity to restore any data that was backed up to your Google account.'
Darklouis said:
You could check my guide here on how to unbrick your pocophone:
https://forum.xda-developers.com/poco-f1/how-to/unbrick-flashing-stable-rom-pocophone-t3901152
Click to expand...
Click to collapse
I have an issue with the MiFlash part, it seems that it doesn't work as I mentioned...
Aight all, formatting data partition to ext4 worked, now it is booting
kishikaisei said:
Aight all, formatting data partition to ext4 worked, now it is booting
Click to expand...
Click to collapse
Works now?
mecoromeo said:
Works now?
Click to expand...
Click to collapse
So I had an OS-less phone that don't get recognised in MiFlash, and I had orangeFox recovery.
The steps to fix were:
- Flash a full stock Firmware
- Flash the stock ROM
- Flash DFE
- Format data to ext4
- Reboot and it works
So thanks all for your help

Errors after flashing TWRP

Hello
After flashing TWRP (twrp-umi-3.4.0-2.img - Team Win Recovery Project) with and without Formatting Data, which anyways triggers some errors (see picture), clicking on Install I am shown /sdcard folder, and when I go up one level I see a bunch of folders but not Internal Storage. So I am unable to use TWRP.
I had identical results using twrp_umi.img also.
USB OTG is not working.
Please help. I have no idea what to do next.
Hancoz said:
Hello
After flashing TWRP (twrp-umi-3.4.0-2.img - Team Win Recovery Project) with and without Formatting Data, which anyways triggers some errors (see picture), clicking on Install I am shown /sdcard folder, and when I go up one level I see a bunch of folders but not Internal Storage. So I am unable to use TWRP.
I had identical results using twrp_umi.img also.
USB OTG is not working.
Please help. I have no idea what to do next.
Click to expand...
Click to collapse
hi
flash twrp 3.4.1b-0313
that one i use an works fine also with decrypt
Thanks for your suggestion, but the closest I can get is TWRP-3.4.1B-0218. Where did you find the twrp 3.4.1b-0313 version? And did you format data or not?
Hancoz said:
Thanks for your suggestion, but the closest I can get is TWRP-3.4.1B-0218. Where did you find the twrp 3.4.1b-0313 version? And did you format data or not?
Click to expand...
Click to collapse
i have it on my pc
i can upload it for u Tomorrow
yes i format data
I found it, and tomorrow I'll try it. Many thanks.
Sorry to disturb you again, but I read contrasting procedures on how to flash a ROM, on MI 10.
Some say:
- flash TWRP
- format data
- flash ROM.
Others say:
- flash TWRP
- flash ROM
- format data.
Some more:
- flash TWRP
- wipe dalvik and cache (no need to format data anymore)
- flash ROM.
What did you do exactly?
BTW do you know the TWRP psw?
Many thanks for your support.
Hancoz said:
Sorry to disturb you again, but I read contrasting procedures on how to flash a ROM, on MI 10.
Some say:
- flash TWRP
- format data
- flash ROM.
Others say:
- flash TWRP
- flash ROM
- format data.
Some more:
- flash TWRP
- wipe dalvik and cache (no need to format data anymore)
- flash ROM.
What did you do exactly?
BTW do you know the TWRP psw?
Many thanks for your support.
Click to expand...
Click to collapse
twrp pasw 152v
format data
reboot recovery
connect phone to pc
put zip file ro phone
wipe cache an dalvik cache
install zip
wipe again
reboot recovery
wipe again
go to reboot
power off the phone
now wen its shut down power it on
an it shut boot
it will take a litle time
I tried many version of wzsx150’s TWRP, the latest being 3.4.1b-0313, but the result is always the same (whether fastboot flash recovery twrp_umi.img or fastboot boot twrp_umi.img).
If I format data there are errors (first picture). If I go directly to install (with or without wipe dalvik and cache) I am anyway unable to see the folders of Internal Storage (second picture). So the TWRP is useless and I am stack with a China ROM device, which is not my first desire.
BTW password is incorrect (third picture), though I doubt it has something to do with the shortcomings.
Please I need a thoughtful help.:crying:
Here the forgotten pictures.
the passwd for decryption
is the one u hade to unlock ur phone before u try flashing it
Whether I use the psw for decrypting (Mount/Decrypt Data) or right at the start, it is always refused. I don’t know if this is the reason why in Install the /sdcard folder has only 0 and TWRP subfolders, or not. In any case there is no way I can flash a thing.
Hancoz said:
Whether I use the psw for decrypting (Mount/Decrypt Data) or right at the start, it is always refused. I don’t know if this is the reason why in Install the /sdcard folder has only 0 and TWRP subfolders, or not. In any case there is no way I can flash a thing.
Click to expand...
Click to collapse
if u dont incert the correct passwd u wont be able to do anything
The only password that I have is that you gave me: 152v. And it does not work.
Hancoz said:
The only password that I have is that you gave me: 152v. And it does not work.
Click to expand...
Click to collapse
didnt u have one ro unlock the lockscreen on miui11
I don't understand what you mean. Anyway I did the bare basic of setting on the stock China ROM. No fingerprint, no PIN, no Pattern, no Password or any other lock. In Developer options USB debugging is ON.
Hancoz said:
I don't understand what you mean. Anyway I did the bare basic of setting on the stock China ROM. No fingerprint, no PIN, no Pattern, no Password or any other lock. In Developer options USB debugging is ON.
Click to expand...
Click to collapse
hmm then i shutten ask for passwd
have u try not enter anything
After I reinstalled Stock ROM with MiFlash, and flashed TWRP, the psw disappeared completely and was able to flash EU ROM V12, But now I am stuck in TWRP. No way to get out of it.
And if I try to wipe I get the error: failed to mount '/data' (see pciture).
Hancoz said:
And if I try to wipe I get the error: failed to mount '/data' (see pciture).
Click to expand...
Click to collapse
now u have to do like this
format data
reboot recovery
connect phone to pc
put zip file to phone
wipe cache an dalvik cache
install zip
wipe again
reboot recovery
wipe again
go to reboot
power off the phone
now wen its shut down power it on
an it shut boot
it will take a litle time
Success! But only after I formatted data after flashing the EU ROM. I don't know how to thank you for your support. You were very helpful.

Categories

Resources