hello...i hope that someone can help me....when i try to turn off the device,it shut down and after few seconds reboot?why?
also simetime the phone don't turn on and on screen i see a green battery with a thermo....someon can help me?
Did you find the answer to this? i am sending my SGS2 back for replacement. i have the same errors plus the following.
Phone selects speaker rather than earpiece as default for incoming/outgoing calls
Phone on ocasions randomly starts Kies and Voice commands even if there is no physical contact with the phone
sometimes the phone defaults back to a launcher i have never seen before (it is not touchwiz) and i have no idea how to launch it without it doing it automatically.
The faults you mentioned can be bypassed with a battery pull but they are annoying, I didn't have these problems until i upgraded my firmware through Kies to KE7.
I have an O2 branded device.
woody_2k said:
Did you find the answer to this? i am sending my SGS2 back for replacement. i have the same errors plus the following.
Phone selects speaker rather than earpiece as default for incoming/outgoing calls
Phone on ocasions randomly starts Kies and Voice commands even if there is no physical contact with the phone
sometimes the phone defaults back to a launcher i have never seen before (it is not touchwiz) and i have no idea how to launch it without it doing it automatically.
The faults you mentioned can be bypassed with a battery pull but they are annoying, I didn't have these problems until i upgraded my firmware through Kies to KE7.
I have an O2 branded device.
Click to expand...
Click to collapse
same issues to me... I'm trying to fix it flashing a stock rom without good results yet In the meantime I'm waiting for a USB jig from ebay before to send it to technical service
I have a I9100M(BELL) flashed with cognition 1.32 with same problem.
Randomly my phone will:
-go into driving mode
-answer calls in speaker phone mode
-start alarm clock
-think its charging when the cable is not plugged in
-Reboot it self/turn it self on when its off
-wont connect to computer or charge even when cable is plugged in.
I need to send it in for repairs what should i flash? there is no bell branded firmwares or roms.
jinxedsoul said:
I have a I9100M(BELL) flashed with cognition 1.32 with same problem.
Randomly my phone will:
-go into driving mode
-answer calls in speaker phone mode
-start alarm clock
-think its charging when the cable is not plugged in
-Reboot it self/turn it self on when its off
-wont connect to computer or charge even when cable is plugged in.
I need to send it in for repairs what should i flash? there is no bell branded firmwares or roms.
Click to expand...
Click to collapse
Exactly the same to me
How do you flash congnition? just over the stock rom with odin?
did you flash modem?
Absolutely same here, since coming from CM7 to VillainRom.
Never had that before.
I´m waiting and watching it and your results!
Thanks for this thread.
That's why I don't root the phone..it works fine.
---
- Sent from my iPad using Tapatalk
pachi72 said:
That's why I don't root the phone..it works fine.
---
- Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
This has nothing to do with root access.
I cannot believe that any problem related just because you have access to your system.
Back to topic, flashed back to cm but problem persists.
It's getting really bad near to flashing stock and bring it back to change device if someone knows what it is could be helpful.
I also have this problem. I think it has something to do with the usb port.
Because sometimes it just scans for media, or it thinks it is charging. Really weird! Then i just put in the charger and it stops for a while. Turning off will just reboot the device. And removing battery and plugging it back it also just reboots the phone.
I hope it is not hardware related...
I was looking for help for a problem I have but this seems to cover most of the problems I'm having.
Mine has recently started going into a strange mode after shutting it down. I get the battery charging symbol alternating with the "battery overheating" symbol.
The only way to stop it is to remove the battery for at least a couple of hours (if you put it straight back in it automaticly starts up and goes back to flashing the battery warnings) or pressing Power, Vol+ and Home and choosing Reboot.
I have also noticed its very slow to respond to plugging the charger in or out. It doesn't always wake-up and bleep when the charger is put in and it stays showing its charging for some time after the charger has been removed.
I was told that the charger should be removed as soon as charging is compleated but surely overnight is the only time we have available to charge these phones!
Depending on the custom rom or kernel you are using, it might not support off mode charging.
To avoid having a "problem" with charging the phone in off mode, some developers decided to make the phone boot up when the phone is been charged when the phone is off.
Going back to an official stock ROM fixes this problem.
cyanogen mod 7 said:
cm_galaxys2_full-23.zip (2011-08-15 08:48:18)
Enable power off charging (LPM) (android_device_samsung_galaxys2)
Click to expand...
Click to collapse
As for Cyanogen, since built 23, you can charge the phone when it is in the "off" state. Please wipe out your userdata partition before flashing. Do not restore from a previous backup.
I fixed my reboot problem (rebooting instead of turning off) by letting the battery drain all the way so it couldn't boot anymore. Tried turning it on to see if it really doesn't go on anymore. After that I plugged in the charger and I got the charging-symbol and it did not turn on so I kept it charging overnight while turned off and in the morning it was finished and turned it on.
I also cleaned the usb-port on the phone with a toothpick. It had alot of dust stuck in it which I couldn't see. After that no more problems...for now. They haven't returned for 2 days now.
WoollyBully said:
I was looking for help for a problem I have but this seems to cover most of the problems I'm having.
Mine has recently started going into a strange mode after shutting it down. I get the battery charging symbol alternating with the "battery overheating" symbol.
The only way to stop it is to remove the battery for at least a couple of hours (if you put it straight back in it automaticly starts up and goes back to flashing the battery warnings) or pressing Power, Vol+ and Home and choosing Reboot.
I have also noticed its very slow to respond to plugging the charger in or out. It doesn't always wake-up and bleep when the charger is put in and it stays showing its charging for some time after the charger has been removed.
I was told that the charger should be removed as soon as charging is compleated but surely overnight is the only time we have available to charge these phones!
Click to expand...
Click to collapse
What kernel and rom are you using? I have not seen the battery overheating symbol on the sgs2.
No, there is no need to remove the phone from charger, when the phone gets to what is considered full, the battery will stop charging by itself.
Are you using the original samsung charger that came with the phone, or are you using a after market charger? Most of these USB chargers do not send a signal on the data lines. When using these chargers, the phone becomes laggy and unresponsive, there is also a delay to register anything on the touch screen. Stay away from these chargers.
For lithium batteries just charge it whenever you feel like it. Lithium batteries have a few thousand deep charge cycles, meaning if you use up all the power, then charge it,you use 1 deep charge cycle. However, if you use the micro cycles for charging, you can charge the batteries a few million times. Leaving the battery on empty for too long will damage the lithium battery.
Can any one confirm if this is a hardware or software issue as i now have the problem when i try and switch the phone off it will just reboot?
The Same issue occurs in my sgs2
hi everybody,
i just got my sgs2 ten days ago
everything seems good at first
then i realized screen standby lock lag problem, there exist a lag between 1 second to 2.5 seconds.
i ignore that due to it cannot be named as a problem, it seems like a bad characteristic
then yesterday , i have faced with another problem
after i have docked the phone to the original vehicle dock kit,
phone cannot be closed via power button , i hold it 1.5 seconds then chose turn off among list, phone looks like to be turned off then after a little while it just vibrates and reboots. That is phone cannot be turned off, it s somehow turn itself on again.
Whats the reason of this problem ?
In another forum one faced with the same problem said that it turned out to be normal when the battery is erased but the problem is occured again after docking.
micro usb connector
I droped my phone in the water, got it alive again, but with all the error(overheat battery symbol, no stable usb connection, reboot when i power off, 100% charged not going away) replaced the micro usb connector with a new one.
Some problems are gone but i still can't connect to pc (kies, debug etc), poweroff problem still happen sometime.
Conclusion: It is not only the usb part of the phone that are causing this problem.
But I do belive its a hardware problem.
Have you phone maybe got to much to drink too..
usb port???
I've recently been experiencing the same problem
When I turned off my phone it switched on again!
And removing battery and plugging it back it also just reboots the phone.
Sometimes the USB connector and charger are confused
Do solved the problem by changing the USB port?
plz help me
Thank you in advance for helping me
This is definately a hardware issue. Clean the usb connector, failing that it will need replacing
On Behalf of SamsungCarla:
"Hello,
Samsung takes all product related issues seriously. We invite the customer to contact us so that they can examine the phone to determine the cause of this incident. If you send us your name, phone number, phone IMEI, where the product was purchased, and email address to [email protected], we will contact you to see how we can help.
Sincerely,
SamsungCarla
Samsung Support"
Hi,
i have a european htc flyer with LeeDroids actual custom rom (GB).
Today I drove my car, while charging it with a special 12V - Micro USB-Car Cable.
I tried google navigation and some other features and after that I chose HIBERNATE from the power-menu.
After half an hour I wanted to reactivate the device but everything I try - it simply wont start. display stays black, i tried every button (including the combination to bring it in the recovery mode). nothing works. the red light next to the power button is on (as if it is still loading).
has anyone an idea, what i can try to start the device, is it a brick? what about garantuee in this state? what should i do??
please help, thx
You need to give it time on the proper wall charger. Red indicates a completley depleted battery. I don't think you'll get what you need from a usb charging mode at this point. It could take some time to revive if you've push the battery far enough to deep discharge becasue the initial period will be used to recondition the battery at very low current.
...has been on the wall charger for hours - no effect
Can you plug it into the PC and see if it detects anything at all and if it does what is that. The other possibility is that you've somehow ended up in download mode.
I ended up in download mode on my original incredible. Not fun. See if it boots if you plug it into the pc. If so, I know how to fix it.
Sent from my HTC Flyer
nothing detected when plugged in via usb onto my pc
tried also adb shell, sais no connected device
think its really dead...
i have a flagship store in town, bring it in tomorrow -keep you posted, what the problem was/is
Let Lee know too if you haven't already just in case there is something in the code causing problems. That way he can pull it to keep other people safe.
I'm not sure what happened. My US Galaxy Player was working fine yesterday, but this morning when I went to wake it from sleep it was acting like it had a dead battery. I plugged it into a charger and rebooted it, and the battery manager said I had 45% charge. I unplugged it and it shut down. Not a soft shutdown, like when you select the option from the power menu, but a hard shutdown, like when you pull the plug on a computer.
I'm running the ROM, Kernel, and GApps found here: http://forum.xda-developers.com/showthread.php?t=2264671
(the first two downloads)
It's been a few days since I last flashed it, so I'm wondering if there might be a hardware issue.
PS: I also am noticing that when I do power it on while plugged into the wall, it skips the Samsung Galaxy S & CyanogenMod screen (and the one before that, I can't remember what it says), and goes straight to the CyanogenMod loading wheel. Every time I've tried to start it up, I've been unable to do so before it shows the Battery Charging icon (for charging when shutdown). I haven't noticed an animation for the charging icon, but my Player is now reporting that it's at 60% charge, so it seems to be working.
I've tried leaving the microUSB end of the charging cable in and unplugging the wall part, but it shut down as well (not totally unexpected, but I'm asking for help so I figure I should include as much info as possible).
Thanks in advance for any help you can give!
Fixed it (at least for now). Re-flashing the kernel was all it took.
JUST FYI
AFAIK, All of the newer kernels out there for the YP-G70 have this problem where, if you boot your device plugged in and then unplug it, it shuts off. If you boot your device not plugged in and then plug it in afterwards it's fine. I could be wrong but I think it's a problem in the kernel that everyone is using for a base (CM 10.1) . It's not really that big of a deal but it's something to keep in mind.
Boot with cable connected -> Shutdown before disconnecting cable.
Boot without cable -> Everything is normal...
hello everyone,i have updated GT-I9205 to 4.4.2 (sprint) stock, the first week was pretty good, at the second week my phone suddenly shut down and wont turn back on the battery was about 35-40%, i tried to connect to wall charger but no sign of life also tried from computer the same again under device menager no device was being added, after a day of trying i was nervous and just keept pressing the power button for about 5 minutes and than it turned on and no problems till yesterday, as usual i have putted the phone to charge when i gone to sleep and when i woke up it was 33% and not charging, when i put the charger it says usb connector connected and wont charge, ive tried to go to download mode and maybe flash with an other stock firmware but wont be recognized, i also tried to wipe data/factory reset but no luck, so i thought it was a hardware failure while trying i've found out that when i am in download mode with usb cable connected and take out the battery the phone stays turned on, than realized that if i connect the usb cable while the phone is of and than go to recovery mode then reboot, when it boots it charges the battery but keeps no notification that its charging just the regular battery icon and if i take out the cable and put it back it says usb connector connected but wont charge , does anyone know what to do with this, is this a hardware issue (i know that if i change the motherboard it will be okay because of firmware) or is this a software issue(what im thinking it is), does anyone how can i change the firmware without odin and without being rooted, or is anyway to root 4.4.2 without odin than install an other firmware or what should i do (instead of killing myself hahahahah).
Sorry for my bad English and if i was not clear please let me know than i will record a video and post it here!
Thanks for your time.
Kind regards from Prishtina DB
its closed
thanks everyone who was here, it was a hardware problem I've fixed the connector on the phone now its working fine, so it has not being a software problem.
Hello!
In advance: I've a "Cubot X9" Smartphone - but the error exists for many smartphones of nearly all brands when you Google. That is why I ask here, I hope, this is correct. Maybe someone has a solution...
As I said, I've a Cubot X9 Smartphone. Since the day before yesterday I have the problem, that it is not possible to charge the phone when it is powerd on. When I power the phone off and plug the charger in, the phone starts charging and the charging LED and Symbol on the Screen lights up.
When I switch it on, the charging immetiatly stops.
I verified the phenomenon with a USB amere meter: When the phone is switched off an I plug the charger in, the current goes up and the phone is really charging. When the phone is switched on and I plug the charger in, the current stays at 0.000A and the phone is really not charging!
I also tried charging in TWRP - there is no charging either.
Another problem is, that the phone is not recognised by the computer. No error message, nothing. It seems, as if the USB port is switched off completly!
I found out, that there are many many phone with this Problem (SGS3, Google Nexus, HTC, ...) but there is never a solution. The problem is always the same: Only charging when switched off and no Connection to the PC.
Do you have an idea?
I already tried to:
- clean the USB-Port from dust
- changing the cable and the charger - I tried about 10 different ones
- disconnecting the battery (I opened the phone for that)
- clean and whiped everything (Data, Cache, System, SD) - although in TWRP and in Android
- flashing a new OS (Cynogen 13 instead of Android 4.4.4 stock)
The Problem still exist! I already thought about changing the battery to a new one. But the phone still last longer than one day, there is no Change in running time...
Is it possible, that the USB-port is damaged? Maybe the Pins for + and - are ok and the phone is charging when powered off. And when it is powered on, the data Pins are also "checked" for a connection - and because they are defective, the connection is not recognised and the phone does not start to charge?
I really like the phone and don't want to buy a new one, because the cameras are masked for security reasons and it is really difficult to get a new one sealed...
Thanks a lot for your help!