I am releasing today a updated version of TWRP for the Samsung Galaxy J700P. This project was rebuilt by me using the 6.01 Stock Kernel instead of the 5.1 kernel that is used in the first release. I also noticed that in the original TWRP the partitions were not setup correctly for backup. If you did a backup in the first copy it had EFS as a option in the backup list and when you select that and do a restore it will cause the phone to soft brick to the point even the stock rom couldn't fix it. The EFS partition wasn't restoring correctly due the configuration in the recovery.FSTAB it was erasing the modemst1 and modemst2 partitions so i reconfigured the FSTAB to support all partitions on the phone itself enabling you to make the correct backups/restores of the phone. I renamed the assert to it's default name which is j7ltespr so it makes it even easier to make custom roms flash correctly without error. Remember this is still in BETA i will be releasing a FINAL build very very soon.
REQUIREMENTS:
Odin 3.10/3.11(For Flashing TWRP)
Install Instructions:
1.Download TAR file from forum (LINK BELOW)
2. Put Phone in Download Mode(When phone is off press buttons:VOLUME DOWN+HOME+POWER Press VOLUME UP to continue)
3.Open Odin up and select AP Then select the file where ever you downloaded the Twrp Tar file from this forum
4. ENJOY!
________________________________________________
Fix for Soft Brick:
NOTES: Use this only if you used the first TWRP and did a backup and restore and it soft bricked your J700P phone! You may need to do a factory reset to get things working right again or even use the stock firmware TAR file for your J700P phone variant (BOOST,SPRINT,VIRGIN MOBILE)
REQUIREMENTS:
1. twrp from this forum (LINK BELOW)
2. External SD (If you decide you want to use the Internal SD instead of the External SD, in step 5. type cd /sdcard instead of cd /external_sd then continue on with step 6)
Install Instructions:
1. Download modem files.zip (LINK BELOW)
2. Extract modem files to external SD
3. Enter Recovery Mode (When Phone is off press and hold buttons VOLUME UP+HOME+POWER until TWRP loads)
4. Click Advanced then click on Terminal
5. Type cd /external_sd and press ENTER
6. Type flash_image /dev/block/mmcblk0p14 modemst1.img and press ENTER
7. Type flash_image /dev/block/mmcblk0p15 modemst2.img and press ENTER
8. DONE!
DOWNLOAD LINKS:
modem.zip:
https://drive.google.com/file/d/0B6_i7gSz4xn3S3VLaWlNY3JjQmM/view?usp=drivesdk
twrp-3.0.2.0-j7ltespr.tar:
https://drive.google.com/file/d/0B6_i7gSz4xn3VlZUTjNOR182dTg/view?usp=drivesdk
-----------------AS ALWAYS USE CAUTION!!!---------------
Bugs: MTP not working already know the problem and it will be fixed in the next build!
Like What I do? Hit the :good:!
Credits: messi2050 for the help with most of the files needed for making this possible!
oh ****, that's what broke my j7, then. nice work!
Ur quite welcome!
Starchild2k said:
Ur quite welcome!
Click to expand...
Click to collapse
HOLY CRAP IT WORKS AGAIN! You're a genius! You need any help for anything (like testing), talk to me. Have you restored the IMEI at all?
minz1 said:
HOLY CRAP IT WORKS AGAIN! You're a genius! You need any help, talk to me. Have you restored the IMEI at all?
Click to expand...
Click to collapse
yes I have! I am currently using this as my main phone. Anyways if your having problems getting the IMEI to register to the phone then you may have to contact your carrier and get your MSL code from them they will know what number to give you! After getting the MSL code write it down for safe keeping and then go to the dialer and press ##786# The RTN menu will come up and click on reset and put in your MSL code for your phone and it will wipe the phone completely and then ur good to go for re-activation.
Starchild2k said:
yes I have! I am currently using this as my main phone. Anyways if your having problems getting the IMEI to register to the phone then you may have to contact your carrier and get your MSL code from them they will know what number to give you! After getting the MSL code write it down for safe keeping and then go to the dialer and press ##786# The RTN menu will come up and click on reset and put in your MSL code for your phone and it will wipe the phone completely and then ur good to go for re-activation.
Click to expand...
Click to collapse
okay, i've sent an email out to boost for this. i'm so happy
minz1 said:
okay, i've sent an email out to boost for this. i'm so happy
Click to expand...
Click to collapse
Just call the 1800 number and speak to a representative and ask them for it they will give it to you.
Starchild2k said:
Just call the 1800 number and speak to a representative and ask them for it they will give it to you.
Click to expand...
Click to collapse
wow, i have my imei back, even after wiping efs. thanks a ton, man! you're stupid awesome.
minz1 said:
wow, i have my imei back, even after wiping efs. thanks a ton, man! you're stupid awesome.
Click to expand...
Click to collapse
Awesome im so glad u got it up and running smoothly. Just to let u know besides of my cm13 project i am going to go ahead a create a deodexed and debloated firmware based off the latest stock firmware should have it ready by later on today if not by tomorrow
Starchild2k said:
Awesome im so glad u got it up and running smoothly. Just to let u know besides of my cm13 project i am going to go ahead a create a deodexed and debloated firmware based off the latest stock firmware should have it ready by later on today if not by tomorrow
Click to expand...
Click to collapse
sounds great man. send me a link when you're done
holy ****balls you are awesome!!!!!! My phone works again thanks to this helpful thread! Now i am no longer stuck with the lg stylo 2 I had to buy to use until i fixed this. I w as actually going to send this back to samsung and have them fix it then i thought let me check the forums one last time bfore i ship it out/. Dude you rule thank you so much.
Wow! So other than MTP, this is a fully functional TWRP for the J700P? Also when an MTP update is available we'll be able to flash it from this one?
I've never used MTP from a recovery myself so I'll just use this one when I'm next home.
Thanks so much.
How does one add Aroma File Manager to this?
Starchild2k said:
I am releasing today a updated version of TWRP for the Samsung Galaxy J700P. This project was rebuilt by me using the 6.01 Stock Kernel instead of the 5.1 kernel that is used in the first release. I also noticed that in the original TWRP the partitions were not setup correctly for backup. If you did a backup in the first copy it had EFS as a option in the backup list and when you select that and do a restore it will cause the phone to soft brick to the point even the stock rom couldn't fix it. The EFS partition wasn't restoring correctly due the configuration in the recovery.FSTAB it was erasing the modemst1 and modemst2 partitions so i reconfigured the FSTAB to support all partitions on the phone itself enabling you to make the correct backups/restores of the phone. I renamed the assert to it's default name which is j7ltespr so it makes it even easier to make custom roms flash correctly without error. Remember this is still in BETA i will be releasing a FINAL build very very soon.
REQUIREMENTS:
Odin 3.10/3.11(For Flashing TWRP)
Install Instructions:
1.Download TAR file from forum (LINK BELOW)
2. Put Phone in Download Mode(When phone is off press buttons:VOLUME DOWN+HOME+POWER Press VOLUME UP to continue)
3.Open Odin up and select AP Then select the file where ever you downloaded the Twrp Tar file from this forum
4. ENJOY!
________________________________________________
Fix for Soft Brick:
NOTES: Use this only if you used the first TWRP and did a backup and restore and it soft bricked your J700P phone! You may need to do a factory reset to get things working right again or even use the stock firmware TAR file for your J700P phone variant (BOOST,SPRINT,VIRGIN MOBILE)
REQUIREMENTS:
1. twrp from this forum (LINK BELOW)
2. External SD (If you decide you want to use the Internal SD instead of the External SD, in step 5. type cd /sdcard instead of cd /external_sd then continue on with step 6)
Install Instructions:
1. Download modem files.zip (LINK BELOW)
2. Extract modem files to external SD
3. Enter Recovery Mode (When Phone is off press and hold buttons VOLUME UP+HOME+POWER until TWRP loads)
4. Click Advanced then click on Terminal
5. Type cd /external_sd and press ENTER
6. Type flash_image /dev/block/mmcblk0p14 modemst1.img and press ENTER
7. Type flash_image /dev/block/mmcblk0p15 modemst2.img and press ENTER
8. DONE!
DOWNLOAD LINKS:
modem.zip:
https://drive.google.com/file/d/0B6_i7gSz4xn3S3VLaWlNY3JjQmM/view?usp=drivesdk
twrp-3.0.2.0-j7ltespr.tar:
https://drive.google.com/file/d/0B6_i7gSz4xn3VlZUTjNOR182dTg/view?usp=drivesdk
-----------------AS ALWAYS USE CAUTION!!!---------------
Bugs: MTP not working already know the problem and it will be fixed in the next build!
Like What I do? Hit the :good:!
Credits: messi2050 for the help with most of the files needed for making this possible!
Click to expand...
Click to collapse
Can you develop a TWRP for galaxy j7 sm-j7109, it will be a huge relief for the owners of these devices.
Thanks
androgeek2010 said:
Can you develop a TWRP for galaxy j7 sm-j7109, it will be a huge relief for the owners of these devices.
Thanks
Click to expand...
Click to collapse
dump boot.img recovery.img and the build.prop for your device please.
minz1 said:
dump boot.img recovery.img and the build.prop for your device please.
Click to expand...
Click to collapse
I have tried my best to extract these files correctly, however you can ask me if these are incorrect.
Thanks
minz1 said:
dump boot.img recovery.img and the build.prop for your device please.
Click to expand...
Click to collapse
Recovery galaxy j7109
minz1 said:
dump boot.img recovery.img and the build.prop for your device please.
Click to expand...
Click to collapse
build.prop galaxy j7109.
Wasn't able to upload them at once, so I have to upload them in three different posts.
androgeek2010 said:
build.prop galaxy j7109.
Wasn't able to upload them at once, so I have to upload them in three different posts.
Click to expand...
Click to collapse
I need the .img , not a binary.
---------- Post added at 08:21 PM ---------- Previous post was at 08:12 PM ----------
androgeek2010 said:
build.prop galaxy j7109.
Wasn't able to upload them at once, so I have to upload them in three different posts.
Click to expand...
Click to collapse
try "adb pull dev/block/bootdevice/by-name/boot.img"
minz1 said:
I need the .img , not a binary.
---------- Post added at 08:21 PM ---------- Previous post was at 08:12 PM ----------
try "adb pull dev/block/bootdevice/by-name/boot.img"
Click to expand...
Click to collapse
Here is the boot.img
I hope this will be the right one.
Related
This Update Provides power improvements and security enhancement for your device
Heating and Battery issues are seems to be fixed
Before you proceed:
Updating to this update doesn’t wipe your data. Still, you should back up all your important data, just in case.
This is an official bug fix update. Installing this, even manually using the method we are providing, doesn’t void your manufacturer warranty in any way.
Make sure that your phone isn’t low on battery. Anything above 35% should be good enough to go ahead with. (Any guide on the internet that asks you to charge your phone above 80% before following a guide, is simply taking unrequired precaution.)
Update Yu Yureka
1.Download the Update file from below (official link).
2.Transfer this zip file as it is (don’t extract it) to the internal storage of your Yureka.
3.Once you’ve done so, reboot your Yureka in recovery mode. To do that, do either of the following steps:
Go to Settings > About phone and tap on the Build Number field seven times. This would unlock Developer Options. Now go to Settings > Developer Options and tick the Advanced Reboot option. Now long press the power button, and then 4.
select the reboot option to get the reboot to recovery option. Select it to boot into the recovery option.
Otherwise, power off your Yureka. Once it shuts down completely, press and hold the Volume Up, Volume Down and 5.
4.Power buttons together till the phone boots up into the recovery mode.
When you enter the recovery mode, select the Apply update option, then the Choose from internal storage option, then the 0/ option, and finally select the cm-tomato-56deeca328-to-00b2e333e8-signed.zip file that you copied to your phone in step 2.
5.Once you select the file in the last step, the recovery will start flashing the update. When the flashing completes, you will be back on the main screen in the Recovery mode.
6.Select the Reboot system now option and wait for the reboot process to complete
Download link
great!
We desperately needed this!
how to flash this update, you provided
Rakesh251 said:
how to flash this update, you provided
Click to expand...
Click to collapse
Thread updated with Procedure
Sangeet007 said:
This Update Provides power improvements and security enhancement for your device
Heating and Battery issues are seems to be fixed
Before you proceed:
Updating to this update doesn’t wipe your data. Still, you should back up all your important data, just in case.
This is an official bug fix update. Installing this, even manually using the method we are providing, doesn’t void your manufacturer warranty in any way.
Make sure that your phone isn’t low on battery. Anything above 35% should be good enough to go ahead with. (Any guide on the internet that asks you to charge your phone above 80% before following a guide, is simply taking unrequired precaution.)
Update Yu Yureka
1.Download the Update file from below (official link).
2.Transfer this zip file as it is (don’t extract it) to the internal storage of your Yureka.
3.Once you’ve done so, reboot your Yureka in recovery mode. To do that, do either of the following steps:
Go to Settings > About phone and tap on the Build Number field seven times. This would unlock Developer Options. Now go to Settings > Developer Options and tick the Advanced Reboot option. Now long press the power button, and then 4.
select the reboot option to get the reboot to recovery option. Select it to boot into the recovery option.
Otherwise, power off your Yureka. Once it shuts down completely, press and hold the Volume Up, Volume Down and 5.
4.Power buttons together till the phone boots up into the recovery mode.
When you enter the recovery mode, select the Apply update option, then the Choose from internal storage option, then the 0/ option, and finally select the cm-tomato-56deeca328-to-00b2e333e8-signed.zip file that you copied to your phone in step 2.
5.Once you select the file in the last step, the recovery will start flashing the update. When the flashing completes, you will be back on the main screen in the Recovery mode.
6.Select the Reboot system now option and wait for the reboot process to complete
Download link
Click to expand...
Click to collapse
OTA or manual update, both have to be flashed using stock recovery, right?
Plz give me the link for stock recovery compatible with CM12S
i am using ThunderZap 4.1 kernel, i am on official lollipop rom,and using twrp recovery. so can i direct flash this.zip via twrp?
Mohammed Raza said:
OTA or manual update, both have to be flashed using stock recovery, right?
Plz give me the link for stock recovery compatible with CM12S
Click to expand...
Click to collapse
Rakesh251 said:
i am using ThunderZap 4.1 kernel, i am on official lollipop rom,and using twrp recovery. so can i direct flash this.zip via twrp?
Click to expand...
Click to collapse
Stock recovery :- http://d-h.st/oYvV
and maybe if youre on stock rom you can flash it using thunderzap's kernel (But im not sure)
Better to use Stock recovery thou
Mohammed Raza said:
OTA or manual update, both have to be flashed using stock recovery, right?
Plz give me the link for stock recovery compatible with CM12S
Click to expand...
Click to collapse
Rakesh251 said:
i am using ThunderZap 4.1 kernel, i am on official lollipop rom,and using twrp recovery. so can i direct flash this.zip via twrp?
Click to expand...
Click to collapse
@Rakesh: no you can not flash it with twrp. ammm may be you will get "installation aborted" error
here is link for stock Recovey.
Stock kernel and recovery
Following error
sal_rc said:
Stock kernel and recovery
Following error
Click to expand...
Click to collapse
amitroutray said:
I am rooted With stock recovery by temporary method.. I am purely on Stock only. When I am manually updating through my stock recovery.. It is showing me the errors...
I have checked the md5 also it is correct.
Thank I advance.
Triggered from YU
Click to expand...
Click to collapse
donwload this whole rom which is included update.
LINK
this should be flash by CM stock recovery only.
I don't feel any change specifically can anyone suggest me why
---------- Post added at 10:01 AM ---------- Previous post was at 09:54 AM ----------
Getiing same error
And can I know the size of the ROM u have given link
#akadroid said:
I don't feel any change specifically can anyone suggest me why
---------- Post added at 10:01 AM ---------- Previous post was at 09:54 AM ----------
Getiing same error
And can I know the size of the ROM u have given link
Click to expand...
Click to collapse
the size of the rom is 643.767MB
i am downloading it.
I can't afford downloading it dude please send me a CD
Lol
But plzzz tell surely if u feel any change
I am rooted With stock recovery by temporary method.. I am purely on Stock only. When I am manually updating through my stock recovery.. It is showing me the errors...
I have checked the md5 also it is correct.
Thank I advance.
Triggered from YU
I think we have to relock the boot loader..
The zip is too large. If I download the OTA on phone, is it the same size or is it a smaller file size?
And if I manually flash from recovery, don't I need to clear cache?
sal_rc said:
Stock kernel and recovery
Following error
Click to expand...
Click to collapse
Hi
The message is very clear:
Your /system partition is RW (read write)
Thats becouse you rooted the device and enabled RW on /system.
Put the /system partition back to his stock state (Read only) and you should be good to go
Cheers
superdragonpt said:
Hi
The message is very clear:
Your /system partition is RW (read write)
Thats becouse you rooted the device and enabled RW on /system.
Put the /system partition back to his stock state (Read only) and you should be good to go
Cheers
Click to expand...
Click to collapse
Mine also same error how to put it back to read only
Worked For ME!!!
I'm on Stock Kernel+Stock Recovery+Non-Rooted+Bootloader Locked :silly:
That Means I have not tinkered with my Device in any means, It is as it was when It was Delivered .
I flashed this update and it was successful. :good: Thanks Pressed.
Faizal Mhate said:
I'm on Stock Kernel+Stock Recovery+Non-Rooted+Bootloader Locked :silly:
That Means I have not tinkered with my Device in any means, It is as it was when It was Delivered .
I flashed this update and it was successful. :good: Thanks Pressed.
Click to expand...
Click to collapse
You flashed the one which is 120MB or so or the 600MB one?
This guide will help you to convert your device to OEM totally and permanently. After this procedure you will be able to flash firmware and recieve OTA updates for non CC devices.
Don't be afraid to brick your phone, if something will go wrong, you'll be able to revert back changes without any consequences.
Follow these steps exactly, one after other:
Make backup of all your personal data because they all will be erased. But do not use twrp for backup!
Download full B148 firmware. You can get it from here: https://drive.google.com/folderview?...00&usp=sharing
Extract package with firmware to your sdcard. You should get dload\UPDATE.APP in root directory of your sdcard. If there was update to Lolipop previously, delete it first!
Copy this repacked TWRP in your adb/fastboot directory https://yadi.sk/d/xWXOpG_3hf4iu
Copy this zip-archive to your sdcard https://yadi.sk/d/gw45fwwfhfKU2
Open command shell in your adb/fastboot directory and execute:
Code:
adb reboot-bootloader
your device will reboot in fastboot mode.
Flash TWRP that you downloaded in step #4:
Code:
fastboot flash recovery twrp.img
Disconnect device from PC and power it off by holding power button untill screen off.
Boot into TWRP: press and hold vol+ and power buttons simultaneously untill you'll see boot logo.
In TWRP make backup of oeminfo partition - press "Backup" and mark "OEMinfo". Save backup to sdcard.
Return to main menu, press "Install" and select OEM.zip which was copied to your sdcard in step #5. Swipe to confirm to install package.
This package will patch your oeminfo partition and flash stock recovery. Don't press "Reboot" button after completion.
Disconnect your device from PC or charger if it was connected, power off device by pressing and holding power button untill screen off.
Power on device by three buttons method: press and hold power, vol+, vol- simultaneously untill you'll see boot logo.
Update process should be start.
After successful update to B148 you are good to go to Lollipop.
How to revert back in case if update to B148 will fail:
Switch your device in fastboot mode: power off device, then press and hold vol- and connect device to PC.
Flash repacked TWRP as was mentioned in step #7.
Boot into TWRP, press "Restore" and restore your backup of oeminfo partition made in step #10.
Reboot in system.
If you are brave and desperate enough, you can go much shorter way:
Install TWRP if you had not yet.
Install OEM.zip from step #5.
Update to Lollipop.
Note that in this way you will not have backup and ability to revert back changes and it's not a fact that Lolliip update will proceed, it was not tested, but I presume it will.
I'm not taking any responsibility if you brick your phone, all you will do with your device is on your own risk.
Requirements:
Unlocked bootloader.
I want say thanks to:
@ArkAngel06 for testing, providing me oeminfo and his patience.
@xordos for providing me his oeminfo.
@tdamocles for testing and his responsiveness.
P.S. Sorry for my poor english, it's not my native language.
I have successfully installed Lollipop, the new TWRP and rerooted. A huge thanks to Kostyan_nsk for making this possible for us, CC users and to SHM for providing TWRP for Lollipop. You guys are awesome !! We couldn't thank you enough !
Edit:
I forgot to thank xordos too . . . who has always been a huge help to HAM2 users !
Great, finally, this is another milestone. Dont know how to say in words. and Lollipop... ** Cheeeeeers **
Man, now I am thinking to get a backup phone, after one year, I still not find any other phone at this price level. I mean battery and screen size.
Hat off and Thanks all the hard work.
xordos said:
Great, finally, this is another milestone. Dont know how to say in words. and Lollipop... ** Cheeeeeers **
Man, now I am thinking to get a backup phone, after one year, I still not find any other phone at this price level. I mean battery and screen size.
Hat off and Thanks all the hard work.
Click to expand...
Click to collapse
This is all a little off track, but..
Yeah, I bought mine(CC) off ebay-used-$150/ no charger. Not in bad shape with a small nick on one corner.
This phone runs tons better than my wifes Galaxy s4 with the SD600 on lollipop. The s4 lags like hell. I tried using the s4 with the touchsquid remote app and it was unusable/laggy. The Huawei works great with touchsquid remote app.
where is all CC users?
Anyone think that this will also work for the Wind Mobile version?
Sent from my MT2L03 using Tapatalk
jscrimshaw said:
Anyone think that this will also work for the Wind Mobile version?
Sent from my MT2L03 using Tapatalk
Click to expand...
Click to collapse
Yes it works, I did it with my WIND Mobile HAM 2
Each time I try to flash the oem.zip file in TWRP I get:
E: Unable to open zip file
Error flashing zip 'sdcard/OEM.zip'
Updating partition details...
Any ideas please?
johndubs said:
Each time I try to flash the oem.zip file in TWRP I get:
E: Unable to open zip file
Error flashing zip 'sdcard/OEM.zip'
Updating partition details...
Any ideas please?
Click to expand...
Click to collapse
Trying to open your zip file on your PC to make sure it's not corrupt.
medwatt said:
Trying to open your zip file on your PC to make sure it's not corrupt.
Click to expand...
Click to collapse
Thanks Medwatt. I tried thatand all seems to be fine. Is it possible to upload each file individually and flash each of the files in turn?
johndubs said:
Each time I try to flash the oem.zip file in TWRP I get:
E: Unable to open zip file
Error flashing zip 'sdcard/OEM.zip'
Updating partition details...
Any ideas please?
Click to expand...
Click to collapse
Check file permissions and make sure zip file signature verification disabled.
Thanks! This works!
Worked the first time. I have a stock "CC" Ascend mate running L now! Thanks again!
johndubs said:
Thanks Medwatt. I tried thatand all seems to be fine. Is it possible to upload each file individually and flash each of the files in turn?
Click to expand...
Click to collapse
in es file explorer (or you can use other tools in pc), select oem.zip, property, and calc the md5 checksum, it should be
27fed6aca60059671a0208e6f190d3cb
also, you can try different sdcard
xordos said:
in es file explorer (or you can use other tools in pc), select oem.zip, property, and calc the md5 checksum, it should be
27fed6aca60059671a0208e6f190d3cb
also, you can try different sdcard
Click to expand...
Click to collapse
Thanks for your help. MD5 checksum revealed faulty SD card!
when i try to fastboot flash recovery twrp.img I get an error: cannot open 'twrp.img' .... what can be the problem? I downloaded the one in the guide and moved it to my ADB folder and overwrited my old one that was there.
Nevermind, I got it to work on my MT2-L03 SAMPLE. I ended up following the shortcut at the bottom of the guide and used my old TWRP to flash. Thanks for the help dude you're awesome!
GadgetStrutter said:
when i try to fastboot flash recovery twrp.img I get an error: cannot open 'twrp.img' .... what can be the problem? I downloaded the one in the guide and moved it to my ADB folder and overwrited my old one that was there.
Click to expand...
Click to collapse
Sounds like your typing the name of the file wrong....Download again, before moving it into your ADB folder rename it twrp2.img, then move it, then
Code:
fastboot flash recovery twrp2.img[/img]
For those new to convertion (just did it today),
1. Remember to enable USB debugging in Settings
2. Install Adb installer (to use with adb and fastboot commands)
xordos said:
where is all CC users?
Click to expand...
Click to collapse
Worked perfectly on my HAM2 and my wife's. Thanks for all your work on this!!!
OptimusPrimous said:
Worked perfectly on my HAM2 and my wife's. Thanks for all your work on this!!!
Click to expand...
Click to collapse
Thats all @Kostyan_nsk great work that successfully patched CC to OEM, every CC user should press the thanks button in the 1st post if not done that yet.
Went about installing adb and fastboot. Successfully boot unlocked and now when I am trying to flash the update package for B148 the update seems to be going no where.
It did change my CC logos to Huawei one so OEM partitions may have been correctly flashed.
The screen is now stuck at usb update starting...
What can be wrong? Is it safe to reboot at this screen. I suspect the update didnt initialize properly.
I have the update.app copied to the root folder of my microsd and thats what i selected.
Please help. Thanks
Never mind folks, rookie mistake i didnt have the update.app in a dload folder just copied the file itself.
The update is now in progress.
Hi,
i had B00 with root and chinese recovery
after updating to b121 i goot bootloop
than i changed recovery back to stock
tried to delete cache and system etc. nothing worked
B100 Upgrade via dload/update.app not working cause version mismatch i think
what can i do now. I don't need 349 euro trash.
please help me
Same problem here
Try updating with the full B121 ROM. I have uploaded it here https://mega.nz/#!dgZwAQpb!XcZSZJOWvG1DIDoJRr_EYSehtqTU1ciPE53bNhII8JQ
Follow the instructions in the included documents.
flibblesan said:
Try updating with the full B121 ROM. I have uploaded it here https://mega.nz/#!dgZwAQpb!XcZSZJOWvG1DIDoJRr_EYSehtqTU1ciPE53bNhII8JQ
Follow the instructions in the included documents.
Click to expand...
Click to collapse
Thanks mate, I'll give it a try.
pappapishu said:
Thanks mate, I'll give it a try.
Click to expand...
Click to collapse
any chance?
Fixed it with honor 6 multi-tool, huwaeiupdateextractor and fw b100.
Now i'm installing the b121 right away.
@evilmumi: hope you fixed it as well.
---------- Post added at 04:26 PM ---------- Previous post was at 04:24 PM ----------
evilmumi said:
any chance?
Click to expand...
Click to collapse
sorry, i didn't see your previous post.
yes, i figured out:
- downlaod the fw b100 version
- download honor 6 multi-tool (yes, even if it's made for the 6, it worked for 7 as well) and follow the "unbrick" procedure
if you have any question please ask
flibblesan said:
Try updating with the full B121 ROM. I have uploaded it here ...
Follow the instructions in the included documents.
Click to expand...
Click to collapse
thanks
you are my hero.
back in business
i hope i can use titanium backup to restore my old data w/o root
i am in trouble! i have erased all (cache dalvick data and system) by twrp! Now obviously the phone is on bootloop...i need desperately a system rom to flash
flibblesan said:
Try updating with the full B121 ROM. I have uploaded it here https://mega.nz/#!dgZwAQpb!XcZSZJOWvG1DIDoJRr_EYSehtqTU1ciPE53bNhII8JQ
Follow the instructions in the included documents.
Click to expand...
Click to collapse
Alphasampei said:
i am in trouble! i have erased all (cache dalvick data and system) by twrp! Now obviously the phone is on bootloop...i need desperately a system rom to flash
Click to expand...
Click to collapse
just read the thread
short:
0.)download from mega
1.) copy update.app on micro sd card /dload
2.)boot with volume up down and power than you can work!
evilmumi said:
just read the thread
short:
0.)download from mega
1.) copy update.app on micro sd card /dload
2.)boot with volume up down and power than you can work!
Click to expand...
Click to collapse
nope! still boot in twrp, i have no system inside the phone
sometimes we have this problem in our german forum too! More on rooted devices!
reflashing the full B100 or B121 rom help
we do it like your user described it here:http://forum.xda-developers.com/showpost.php?p=63070827&postcount=9
BTW: Where we can find the "updateextractor"? All versions of it that i have found, doesn’t work for H7 Roms!:crying:
Back to System boot
evilmumi said:
Hi,
i had B00 with root and chinese recovery
after updating to b121 i goot bootloop
than i changed recovery back to stock
tried to delete cache and system etc. nothing worked
B100 Upgrade via dload/update.app not working cause version mismatch i think
what can i do now. I don't need 349 euro trash.
please help me
Click to expand...
Click to collapse
When the phone is in RecoveryMode try a long press vol-up/vol-down/special-key and power all together for a few seconds until the phone reboots ... after that, the phone will start in SystemMode ... for me it worked.
stalfst said:
When the phone is in RecoveryMode try a long press vol-up/vol-down/special-key and power all together for a few seconds until the phone reboots ... after that, the phone will start in SystemMode ... for me it worked.
Click to expand...
Click to collapse
I realized that when I plugged the charger to phone and then powered it, it went off the TWRP boot loop. I fdon't know if any others have same issue.
When I updated my phone I had same kind of problem so I flashed stock recovery and then made the force upgrade following the rom's intructions.
Now eveything works again.
Alphasampei said:
nope! still boot in twrp, i have no system inside the phone
Click to expand...
Click to collapse
Twrp has a bootloop bug.. I also got this after rooting. What you need to do is to get it out of the bootloop by getting the phone in fastboot/download mode. I have no clue on how I finally got it to boot in fastboot mode, but I tried and tried until it finally booted in fastboot. Then I flashed stock recovery and everything was good after that. Lesson learned was that twrp and especially Chinese twrp is buggy as hell!
kjettern said:
Twrp has a bootloop bug.. I also got this after rooting. What you need to do is to get it out of the bootloop by getting the phone in fastboot/download mode. I have no clue on how I finally got it to boot in fastboot mode, but I tried and tried until it finally booted in fastboot. Then I flashed stock recovery and everything was good after that. Lesson learned was that twrp and especially Chinese twrp is buggy as hell!
Click to expand...
Click to collapse
I had no problems at all, no bootloops or any other weird stuff. Perhaps because I wiped cache + dalvik after supersu installation?
have the same problem, what should i do?
sugarray21 said:
have the same problem, what should i do?
Click to expand...
Click to collapse
Read instruction HERE
Fix Bootloops
Breaking out of bootloops depends on your device state and what kind of problem you are having. In this section, we are going to focus on the popular case where you can’t access neither the system nor the recovery partitions.
• Step 1: Turn off the phone.
• Step 2: Press Volume UP + Power Button For 10 seconds while connecting the USB cable from your device to your computer. That must make you boot into the bootloader mode.
(Update: A user has reported that holding the power button is optional on some models. Thanks to @sminki for pointing that out).
• Step 3: Head to your computer and download and install the following tool:
http://forum.xda-developers.com/show....php?t=2433454
• Step 4: Download the latest complete update file (B121) from:
http://www.modaco.com/forums/topic/3...s-121115-b140/
Then, extract it and get its UPDATE.app file.
• Step 5: Use the Huawei Update Extractor to extract the (BOOT.img), (SYSTEM.img), (RECOVERY.img), (CACHE.img), (CUST.img), and (USERDATA.img) from the UPDATE.app file that you have extracted from Step 4.
• Step 6: Open your command prompt, and navigate to the right directory where you have extracted the image files. Use the “cd” and “..” commands to do so.
• Step 7: Type the following commands and execute them one by one >
Code:
fastboot flash boot BOOT.img
fastboot flash system SYSTEM.img
fastboot flash recovery RECOVERY.img
fastboot flash cache CACHE.img
fastboot flash cust CUST.img
• Step 8: You can also erase the user data if you like by typing and executing the following >
Code:
fastboot flash userdata USERDATA.img
• Step 9: Reboot your device using the following command >
Code:
fastboot reboot
• Step 10: You must be able to boot successfully into the system.
(Noten this model, the "fastboot erase [Partition]" command has been reported by two users that it is not working. Thus, flash the image files directly and if it did not work, then check with the Huawei support center to fix your device. Thanks to @sminki for reporting this).
http://forum.xda-developers.com/honor-7/general/guide-beginners-how-to-root-update-fix-t3255452
TWRP Terminal Emulator command method.
I followed the steps here, http://androidforums.com/threads/twrp-bootloop-fix-after-update-ota.922585/ Thanks to the Author... hash_brown.1855790
Which is actually for LG, but slightly altering for Honor7 it works!!
for Honor 7 the commands to be run from TWRP Terminal command emulator will be
dd if=/dev/zero of=/dev/block/platform/hi_mci.0/by-name/fota
Click to expand...
Click to collapse
Hit GO/enter(return)...wait, takes a few seconds
Now input this
dd if=/dev/zero of=/dev/block/platform/hi_mci.0/by-name/misc
Click to expand...
Click to collapse
Hit enter (return)...wait again.
When its complete, reboot.
:good:
Alphasampei said:
nope! still boot in twrp, i have no system inside the phone
Click to expand...
Click to collapse
I had the same problem with twrp i can walking through how to unbrick your phone happy to help
Man every phone I get, I brick!! Im stuck in a BLU boot loop. Can't find any files out there for this model. Well did see one here
http://clangsm.com/ftpdemo/index.php?dir=Flashes/BLU/Studio%20XL%202/
They want $$ for the download :crying:
Anyone a member there that could get me this file?
Thanks for the help
Try this
Hey
https://www.ineedrom.tk/2017/04/09/blu-studio-xl-2-s0270uu-rom-stock-firmware/
I'm working on twrp. I haven't tried flashing it
edit: I've bricked and re-flashed. It's a good image
what version is this?
dougunder said:
Hey
https://www.ineedrom.tk/2017/04/09/blu-studio-xl-2-s0270uu-rom-stock-firmware/
I'm working on twrp. I haven't tried flashing it
edit: I've bricked and re-flashed. It's a good image
Click to expand...
Click to collapse
is this firmware v08? it rendered my phone inoperable. no cell, no camera and several other issues. the phone came installed with v09
Anyone ever find V09??
I am also in need of BLU_S0270UU_V09_GENERIC firmware for a Studio XL2 , 6.0. Anybody have a source for this???
Thanks ahead!
crmcc said:
I am also in need of BLU_S0270UU_V09_GENERIC firmware for a Studio XL2 , 6.0. Anybody have a source for this???
Thanks ahead!
Click to expand...
Click to collapse
I have a phone arriving tmw. First thing I will be doing is pulling the stock images. So if it has v09 I will link it for you.
I uploaded stock system and boot images to Androd File Host. If you still need them let me know.
mrmazak said:
I have a phone arriving tmw. First thing I will be doing is pulling the stock images. So if it has v09 I will link it for you.
I uploaded stock system and boot images to Androd File Host. If you still need them let me know.
Click to expand...
Click to collapse
Could you send me the links to the stock image? I recently rooted this phone using superSU and now I can't install Magisk due to the fact that superSU modified the boot image
killer13666 said:
Could you send me the links to the stock image? I recently rooted this phone using superSU and now I can't install Magisk due to the fact that superSU modified the boot image
Click to expand...
Click to collapse
here is link to my folder for the studio_XL_2
the stock images are in the zip labled
Blu-Studio_XL-2-__BLU_S0270UU_V09_GENERIC-01-03-2017.zip
the modifoed boot.img file will give root adb shell with ability to set selinux to permissive and then mount /system as rw all without needing superSU or magic installed.
The port zips are current w.i.p. of Cm/LM13 for the studio
mrmazak said:
here is link to my folder for the studio_XL_2
the stock images are in the zip labled
Blu-Studio_XL-2-__BLU_S0270UU_V09_GENERIC-01-03-2017.zip
the modifoed boot.img file will give root adb shell with ability to set selinux to permissive and then mount /system as rw all without needing superSU or magic installed.
The port zips are current w.i.p. of Cm/LM13 for the studio
Click to expand...
Click to collapse
Okay, I downloaded the files, but I'm not quite sure how to flash the images onto my phone.... Please forgive my ignorance as I've never had to do this before
killer13666 said:
Okay, I downloaded the files, but I'm not quite sure how to flash the images onto my phone.... Please forgive my ignorance as I've never had to do this before
Click to expand...
Click to collapse
I assume you already know how to get into twrp, because you were previously attempting to flash magic., So no need to cover that.
Put the boot.img to your phone (same way you put the superSu or magic zips)
To flash the boot.img, select install button in twrp. At lower corner or screen in twrp will appear button "Install Image", select that.
then browse folders same as usual but now will show you the img files available .
select the stock boot.img
next screen is "select Partiton to Flash Image"
select Boot, then "swipe"
this will return you to stock boot.img, as long as you were on V9 before.
You should also be able to flash the system.img the same way, if neede, but I have no way to know If is ok to use as upgrade from V8
must have images unzipped from main archive before putting to phone.
mrmazak said:
I assume you already know how to get into twrp, because you were previously attempting to flash magic., So no need to cover that.
Put the boot.img to your phone (same way you put the superSu or magic zips)
To flash the boot.img, select install button in twrp. At lower corner or screen in twrp will appear button "Install Image", select that.
then browse folders same as usual but now will show you the img files available .
select the stock boot.img
next screen is "select Partiton to Flash Image"
select Boot, then "swipe"
this will return you to stock boot.img, as long as you were on V9 before.
You should also be able to flash the system.img the same way, if neede, but I have no way to know If is ok to use as upgrade from V8
must have images unzipped from main archive before putting to phone.
Click to expand...
Click to collapse
Okay, so flashing the boot image in the way you suggested worked for me, but there isn't an option to flash an image to system. Do I also just do that for boot or maybe uboot...?
---------- Post added at 11:16 AM ---------- Previous post was at 11:05 AM ----------
killer13666 said:
Okay, so flashing the boot image in the way you suggested worked for me, but there isn't an option to flash an image to system. Do I also just do that for boot or maybe uboot...?
Click to expand...
Click to collapse
There isn't an option to flash it to system fyi, that's the only reason I am asking where I should flash it to.
killer13666 said:
Okay, so flashing the boot image in the way you suggested worked for me, but there isn't an option to flash an image to system. Do I also just do that for boot or maybe uboot...?
---------- Post added at 11:16 AM ---------- Previous post was at 11:05 AM ----------
There isn't an option to flash it to system fyi, that's the only reason I am asking where I should flash it to.
Click to expand...
Click to collapse
No, don't put the system image anywhere except in system.
I will need to look at the twrp on the device again tonight.
I know the same recovery before being ported to the studio( on my life Max ) allows flashing system image. That's how I usually do my full reset.
On the studio I assumed it was same. Will update when I get back to PC. ( Tethered recovery is a pain ).
But do you actually need to reflash system though?
mrmazak said:
No, don't put the system image anywhere except in system.
I will need to look at the twrp on the device again tonight.
I know the same recovery before being ported to the studio( on my life Max ) allows flashing system image. That's how I usually do my full reset.
On the studio I assumed it was same. Will update when I get back to PC. ( Tethered recovery is a pain ).
But do you actually need to reflash system though?
Click to expand...
Click to collapse
In trying to get the google assistant to work on my phone, I tried flashing something and I think it messed up the build.prop file along with some other things. I forgot to take a backup before flashing the zip and now my phone doesn't boot. It just has a black screen.
************************EDIT************************
/system won't mount either..............
killer13666 said:
In trying to get the google assistant to work on my phone, I tried flashing something and I think it messed up the build.prop file along with some other things. I forgot to take a backup before flashing the zip and now my phone doesn't boot. It just has a black screen.
************************EDIT************************
/system won't mount either..............
Click to expand...
Click to collapse
system not mounting may be a bigger problem.
I ported different TWRP that has the flash system image option.
same as old one you must use "fastboot boot" to get into it, do not flash it to phone.
https://forum.xda-developers.com/devdb/project/dl/?id=27144
mrmazak said:
system not mounting may be a bigger problem.
I ported different TWRP that has the flash system image option.
same as old one you must use "fastboot boot" to get into it, do not flash it to phone.
https://forum.xda-developers.com/devdb/project/dl/?id=27144
Click to expand...
Click to collapse
Okay, so I figured out why /system wasn't mounting. I accidentally set the rm -rf option instead of formatting the partitions, so I fixed the system partition not mounting. And this port of TWRP fixed my phone, so thank you so much for your help!
And as a side note, why exactly can I not flash TWRP onto the phone? What will happen if I do?
killer13666 said:
Okay, so I figured out why /system wasn't mounting. I accidentally set the rm -rf option instead of formatting the partitions, so I fixed the system partition not mounting. And this port of TWRP fixed my phone, so thank you so much for your help!
And as a side note, why exactly can I not flash TWRP onto the phone? What will happen if I do?
Click to expand...
Click to collapse
When the recovery is flashed inside, the touchscreen in recovery does not work. Making using recovery impossible, unless maybe a USB mouse would work
mrmazak said:
When the recovery is flashed inside, the touchscreen in recovery does not work. Making using recovery impossible, unless maybe a USB mouse would work
Click to expand...
Click to collapse
Is there like a port of CWM that I can flash to this? I remember an old phone of mine (I think it was a Samsung Fascinate), I had CWM on it and it didn't use the touchscreen at all, but rather it used the volume keys to move the selection and used the power button to actually select a menu item.
killer13666 said:
Is there like a port of CWM that I can flash to this? I remember an old phone of mine (I think it was a Samsung Fascinate), I had CWM on it and it didn't use the touchscreen at all, but rather it used the volume keys to move the selection and used the power button to actually select a menu item.
Click to expand...
Click to collapse
there is a "carliv" one . Its a CMW with touch also. But will work without.But it does not see the /data partiton on phone. so only good for install from micro sdcard
mrmazak said:
there is a "carliv" one . Its a CMW with touch also. But will work without.But it does not see the /data partiton on phone. so only good for install from micro sdcard
Click to expand...
Click to collapse
So in other words, it won't let you flash anything that'll modify the data partition as well?
killer13666 said:
So in other words, it won't let you flash anything that'll modify the data partition as well?
Click to expand...
Click to collapse
If all goes well, I may have a custom kernel in a few days that will enable the touchscreen
mrmazak said:
If all goes well, I may have a custom kernel in a few days that will enable the touchscreen
Click to expand...
Click to collapse
Please do let me know how that goes.
Hii Guys..
I need the custom TWRP recovery for my LYF water F1S (LS -5201), so that i can root it and install custom ROMs. Developers i request you to do the needful please.
Regards
My phone also f1s.
Did you had any rom-package or recovery.img?
onkarrathee said:
Hii Guys..
I need the custom TWRP recovery for my LYF water F1S (LS -5201), so that i can root it and install custom ROMs. Developers i request you to do the needful please.
Regards
Click to expand...
Click to collapse
Try using this guide
https://forum.xda-developers.com/android/software/guide-how-to-compile-twrp-source-step-t3404024
Guys...i have found a page for the stock rom for LYF water F1s Ls-5201. You can download it from here
I also extracted the stock recovery image from device and here is the link https://drive.google.com/file/d/0BwMCGOjWJuaxY0NSemJ6ZzdNU1U/view?usp=sharing
Also tried the method to make TWRP for LYF water F1_ LS5201 by @suraj-b method.... but not successful yet. For the process i've used twrp recovery of Le 2 x526.
i'm not a developer but it would be my pleasure if whatever i tried, help somebody.
Don't forget to "Hit THANKS..."
onkarrathee said:
Guys...i have found a page for the stock rom for LYF water F1s Ls-5201. You can download them from there http://www.needrom.com/download/lyf-ls-5201/#
I also extracted the stock recovery image from device and here is the link https://drive.google.com/file/d/0BwMCGOjWJuaxY0NSemJ6ZzdNU1U/view?usp=sharing
Also tried the method to make TWRP for LYF water F1_ LS5201 by @suraj-b method.... but not successful yet. For the process i've used stock recovery of Le 2 x526.
i'm not a developer but i would be my pleasure if whatever i tried, help somebody.
Don't forget to "Hit THANKS..."
Click to expand...
Click to collapse
Good job !
How to flash stock firmware to LYF water F1s Ls-5201
Prepare your system-----
1) Install the Qualcomm usb drivers on your system. Download link
2) Check your PC device manager, your phone should be detected in "Qualcomm HS-USB QDloader 9008" mode. It must detect to start the process.
3) Download the stock firmware from here . The software version downloaded with this link is "LS-5201-S10A_LYF_L13EN_200_170124_09-55-13".
4) Extract the downloaded firmware zip to an folder and rename the "IMAGES_FOR_QMSCT" to "firmware".
5) Download & install the QPST tool. Google it you can find it easily.
6) power off your phone & Make sure your device is charged to at least 50%.
7) Run the installed QFIL from installed programmes. Browse in programmer path to the "prog_emmc_firehose_8976_ddr.mbn" file in the folder where firmware is extracted. It will load the firmware & buid will be selected automatically.
8) Click on load xml and select the "rawprogram_unsparse_without_qcn.xml" if you havn't the backup of NV partition of your device.
If you have the backup NV partition of your device than you can select "rawprogram_unsparse.xml" because this will erase your RF Calibration data, IMEI and WiFi/Bluetooth Address etc. and you will have to restore the NV partition after installing the ROM.
I would suggest you to select "rawprogram_unsparse_without_qcn.xml" & keep it simple.
9) Choose the "patch0.xml" after that.
10) Hold the vol+ & vol- key together and plug usb cable to phone to enter into download mode. As you plug in the QPST tool would recognise your device in QDLoader 9008 mode with com port no. and download button will get activated.
11) Click the download button and sit back, it will take some time.
12) "finish dowload" appear, when process got completed and phone will reboot automatically.
13) Disconnect the device from PC one "android screen" appears (usually it takes 5 min. to appear LYF logo screen from android boot screen)
14) If doesn't reboots, there is some problem & get ready for real hard work .
You might have bricked. In this case just press the power button so than it can power ON. If android screen appears you are lucky enough
-----If android screen remains more than 6-8 minute, you are in bootloop. (It useually takes 5 min for LYF logo to appear after android logo)
-----To switch off your device in case of bootloop, press vol+, vol- & power key together for some time. It will switch off.
-----try to flash the firmware again by above process.
I have tested this method on my device and successfully flashed the stock firmware.
Don't forget to "HIT thanks"...!!!
Credit:
@[email protected] for providing the stock firmware
Me: for testing the procedure
Le2 not support MicroSd.
I will try use recovery of oppo R9plus.
Okey.
It works and rooted by supersu system less package.
I shared recovery.img on https://drive.google.com/open?id=0BwVjewgp3fvLbmtxZ21fSUZhOW8
Or download full package with flash tools and supersu.zip [URL="https://drive.google.com/open?id=0BwVjewgp3fvLUnRHS3NGRjlIRTQ]TWRP-OneKeyFlash-supersu-lyf-water-f1s.rar[/URL]
TWRP recovery LYF_LS-5201
Guys... here is the unofficial twrp recovery for LS-5201. Download it here .
Let me know that you suceed..
This is twrp_unofficial_3.1.0.0 ported from Leeco Le2's TWRP recovery using @suraj-b method and if anythong goes wrong on your device download the stock recovery from the thread and flash it from bootloader.
Try on your own risk..!! :fingers-crossed:
Don't forget to HIT "Thnanks" down there
Please share the adb & fastboot files you used for unloacking bootloader and flashing recovery for the noobs. It would help.
keep it up. :good:
zjsss said:
Okey.
It works and rooted by supersu system less package.
I shared recovery.img on https://drive.google.com/file/d/0BwVjewgp3fvLRm9IM0FOcTF1aGc/view?usp=sharing
Click to expand...
Click to collapse
zjsss said:
Okey.
It works and rooted by supersu system less package.
I shared recovery.img on https://drive.google.com/file/d/0BwVjewgp3fvLRm9IM0FOcTF1aGc/view?usp=sharing
Click to expand...
Click to collapse
How to flash it bro...plzzz give us step by step help
---------- Post added at 06:22 PM ---------- Previous post was at 06:14 PM ----------
zjsss said:
Okey.
It works and rooted by supersu system less package.
I shared recovery.img on https://drive.google.com/file/d/0BwVjewgp3fvLRm9IM0FOcTF1aGc/view?usp=sharing
Click to expand...
Click to collapse
If i flash it via fastboot...den can i root it through twrp...
prashant.palange said:
How to flash it bro...plzzz give us step by step help
---------- Post added at 06:22 PM ---------- Previous post was at 06:14 PM ----------
If i flash it via fastboot...den can i root it through twrp...
Click to expand...
Click to collapse
You can download full package and use "OneKeyFlash(LYF-f1s).bat" to flash easier TWRP-OneKeyFlash-supersu-lyf-water-f1s.rar
zjsss said:
You can download full package and use "OneKeyFlash(LYF-f1s).bat" to flash easier TWRP-OneKeyFlash-supersu-lyf-water-f1s.rar
Click to expand...
Click to collapse
Bro but is it proper twrp for f1s...hv u try it
prashant.palange said:
Bro but is it proper twrp for f1s...hv u try it
Click to expand...
Click to collapse
It works well on my phone.
zjsss said:
It works well on my phone.
Click to expand...
Click to collapse
Thnk u soo much to bring us such wonderfull recovery....but bro...i found 2 issue....1 internal storage is showing empty 0mb and 2 der is no option for root like supersu.zip..plzz help me for dat...m i done wrong anything..plzzz help thank u sooo much brother...it doesn't mount internal storage..i tried mound system and data....but data doesn't mount...plzz help..hope u will understand
prashant.palange said:
Thnk u soo much to bring us such wonderfull recovery....but bro...i found 2 issue....1 internal storage is showing empty 0mb and 2 der is no option for root like supersu.zip..plzz help me for dat...m i done wrong anything..plzzz help thank u sooo much brother...it doesn't mount internal storage..i tried mound system and data....but data doesn't mount...plzz help..hope u will understand
Click to expand...
Click to collapse
It's my bad. This img had bugs.I well try to fix it.
You can copy supersu.zip to MircoSD and install it in TWRP rigtht now.
I checked by adb shell root is success.
Very sorry about that.
zjsss said:
It's my bad. This img had bugs.I well try to fix it.
You can copy supersu.zip to MircoSD and install it in TWRP rigtht now.
I checked by adb shell root is success.
Very sorry about that.
Click to expand...
Click to collapse
U r simply genius brother..root works properly.....god bless u ..love u ....:laugh::good:
Just try to make bugless twrp....thnk u in advance....
prashant.palange said:
U r simply genius brother..root works properly.....god bless u ..love u ....:laugh::good:
Just try to make bugless twrp....thnk u in advance....
Click to expand...
Click to collapse
Thx,i found this not a bug.
/data was locked by system.
Into twrp and keep /system read only,
And wipe /data will be ok .
but it will lost all your data in the phone!!!
So backup everything before you do it.
and install supersu .zip again to root.
zjsss said:
Thx,i found this not a bug.
/data was locked by system.
Into twrp and keep /system read only,
And wipe /data will be ok .
but it will lost all your data in the phone!!!
So backup everything before you do it.
and install supersu .zip again to root.
Click to expand...
Click to collapse
So what should i wipe...dalvik, cache, and data dats it..okay....not system...m i right? But data is not mounting den how can i wipe it?
prashant.palange said:
So what should i wipe...dalvik, cache, and data dats it..okay....not system...m i right? But data is not mounting den how can i wipe it?
Click to expand...
Click to collapse
It doesn't matter of wipe /date or wipe 3.
I guess because the phone kernel was rooted.TWRP had right of wipe.
But not so sure that.