Bro's how uninstall Dolby I want flash Project APOLLO please reply if you know
How uninstall Dolby please tell me
Uninstallation and Removal:
The best and easiest way to remove this and any other /system mod from your device is to dirty flash your rom after wiping System in TWRP. Before you begin, make sure you have a compatible rom zip on your internal storage as an OS will need to be installed. As long as you do not Factory Reset or check Data or Internal Storage, your data will be left intact but with a fresh /system partition.
Verify compatible rom zip is on device
Boot to recovery
Wipe > Advanced > System, Dalvik Cache, Cache
Mount > uncheck System
Install > current/compatible rom zip
Reboot
This will help you- http://forum.xda-developers.com/android/apps-games/mod-dolby-atmos-t3109446
Any other way
[email protected] said:
Any other way
Click to expand...
Click to collapse
Dirty flash your current ROM according to the devs instruction.
dweh said:
Dirty flash your current ROM according to the devs instruction.
Click to expand...
Click to collapse
Bro I'm using Resurrection remix rom
[email protected] said:
Bro I'm using Resurrection remix rom
Click to expand...
Click to collapse
Flash the current build with current gapps and then wipe cache and dalvik cache and reboot.
dweh said:
Flash the current build with current gapps and then wipe cache and dalvik cache and reboot.
Click to expand...
Click to collapse
This method will reset my device or not ?
[email protected] said:
This method will reset my device or not ?
Click to expand...
Click to collapse
No it won't. For safer side take a backup.
Related
help plz
when i finished the installation i did the wipe data and wipe dalvik cashe then i click on rebbot now
it reebots and shows android then it gets back to recovery
ppllllllzzzz help
hey jay can u tell me which file do you flashed and which cwm u used
xdaboy122 said:
hey jay can u tell me which file do you flashed and which cwm u used
Click to expand...
Click to collapse
cwm recovery 5 and cwm kang rc1 then rc1 fixes
i did the wipe data and the wipe dalvik but nothing
and when i click power off phone after 10secs it starts by it self
any one???
wipe data/partition/dalvik then mount system and try to flash it again.
U can try to install original HTC rom.it may work
Sent from my Liberty using XDA App
droidtwoseven said:
wipe data/partition/dalvik then mount system and try to flash it again.
Click to expand...
Click to collapse
how do i mount system
jey129 said:
how do i mount system
Click to expand...
Click to collapse
boot CWM then goto mounts and storage then you can see mount /system .select that then flash.
droidtwoseven said:
boot CWM then goto mounts and storage then you can see mount /system .select that then flash.
Click to expand...
Click to collapse
didn't work
maybe the file is corupt i will download it again
jey129 said:
didn't work
maybe the file is corupt i will download it again
Click to expand...
Click to collapse
Basic troubleshooting
Have a feedback afterwards.
droidtwoseven said:
Basic troubleshooting
Have a feedback afterwards.
Click to expand...
Click to collapse
i fixed the problem
thx for the help
Fellow Users,
I wiped:
- Factory/Wipe data
- Dalvik
- Cache
- Every storage
did a fixed permission
- Switched different roms Stock and Custom
- Switched different kernels stock and custom
- Flashed with Odin and with CWM Recovery.
How can i get rid of the nasty scripts or mods that are stuck ??
Is there a way to clean everything harder and deeper than what i did ?
How about init file or something?? i dont have ADB
I think this is how. follow these.
1. Factory reset / Wipe data
2. Wipe Cache partition
3. Wipe Dalvik
4. Go to mount & storage
5. Fix Permissions
6. format /cache
7. format /system
8. format /data
9. format /preload
10. format /sdcard
Try these. But make sure you have a rom to flash on external sdcard. because formatting these will remove system and you will not start phone without flashing a rom.
dimi22 said:
Fellow Users,
I wiped:
- Factory/Wipe data
- Dalvik
- Cache
- Every storage
did a fixed permission
- Switched different roms Stock and Custom
- Switched different kernels stock and custom
- Flashed with Odin and with CWM Recovery.
How can i get rid of the nasty scripts or mods that are stuck ??
Is there a way to clean everything harder and deeper than what i did ?
How about init file or something?? i dont have ADB
Click to expand...
Click to collapse
To fully format the phone you could also use megawipe. It is a flashable zip for cwm which will remove anything, also your sd card. Hence better have a flashable rom on your external sd. You can find it in the dev section or search for mega wipe.
Sent from my GT-I9300 using xda app-developers app
Thanks for help,
I try the method rl421403 says but it didnt help, i also flashed the mega wipe zip file and did the wipe but that also didn't work.
Maybe it is hardware related? is there a way to test this?
dimi22 said:
Thanks for help,
I try the method rl421403 says but it didnt help, i also flashed the mega wipe zip file and did the wipe but that also didn't work.
Maybe it is hardware related? is there a way to test this?
Click to expand...
Click to collapse
Maybe let us now what you want to delete exactly.
Usually the mega wipe well erase any file and leave a blank slate.
Sent from my GT-I9300 using xda app-developers app
chrismast said:
Maybe let us now what you want to delete exactly.
Usually the mega wipe well erase any file and leave a blank slate.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
i dont know but some file must be conflicting, the problem is that the phone keeps rebooting after the screen is of ... i have no other problem ....
dimi22 said:
i dont know but some file must be conflicting, the problem is that the phone keeps rebooting after the screen is of ... i have no other problem ....
Click to expand...
Click to collapse
did you maybe flash a custom kernel? if so try a stock rom with stock kernel
i did i did not working :crying::crying::crying::crying::crying:
Hey guys,
I have had some issues with my current ROM. I want to change the ROM. I am looking to switch to OMEGA.
How would I do this, I currently have AROMA rom. Should I do a factory reset the just reboot into recovery mode and install that way? Or will just installing the ROM from zip work? Or if I do a factory reset do I need to root it again with Odin, or will I not need to root it?
Also for wiping the phone should I wipe my SD card? Or no?
Thank you I searched and found half answers for most of this.
You have to format /system partition and /data partition in order to get a clean ROM, otherwise you may run into some unforeseeable problems.
Don't have to wipe sdcard
Most ROM except stock are pre-rooted.
Sent from my GT-I9300 using xda premium
qtwrk said:
You have to format /system partition and /data partition in order to get a clean ROM, otherwise you may run into some unforeseeable problems.
Don't have to wipe sdcard
Most ROM except stock are pre-rooted.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Ok just to double check what your saying.
I should do a wipe using the built in android factory reset.
Then just install the ROM using the recovery boot.
I will not have to use ODIN or any other soft ware. Just factory reset and install rom.
AW: [Q] Switching ROM and wiping
I'd factory reset in recovery, wipe cache and dalvik, format system and then flash the new ROM from your external sdcard
Please report if that way worked for you
But be sure to backup your apps with titanium backup
|| Typed with my S4 Octa-Beast or my Note 10.1 ||
ch0ka said:
I'd factory reset in recovery, wipe cache and dalvik, format system and then flash the new ROM from your external sdcard
Please report if that way worked for you
But be sure to backup your apps with titanium backup
|| Typed with my S4 Octa-Beast or my Note 10.1 ||
Click to expand...
Click to collapse
Not to sound like a noob... but how do i wipe Cache and Dalvik? also what is dalvik?
Thank you, I will do it today hopefully.
Not sure which ROM I want to switch to. Any recommendations? I am thinking OMEGA.
morinr said:
Not to sound like a noob... but how do i wipe Cache and Dalvik? also what is dalvik?
Thank you, I will do it today hopefully.
Not sure which ROM I want to switch to. Any recommendations? I am thinking OMEGA.
Click to expand...
Click to collapse
He's talking about wiping in recovery.
Dalvik, is kinda Java virtual machine on android, it does concerns you...
About ROM, I suggest you try them out all, and then you will find your Mr.Right, or Ms.Right
Sent from my GT-I9300 using xda premium
morinr said:
Not to sound like a noob... but how do i wipe Cache and Dalvik? also what is dalvik?
Thank you, I will do it today hopefully.
Not sure which ROM I want to switch to. Any recommendations? I am thinking OMEGA.
Click to expand...
Click to collapse
1.boot into recovery, (make a backup , always be safe)
2.wipe data/factory rest
3.wipe cache partition
4.use volume rockers go into advanced , wipe dalvik cache , go back
5.go into mounts and storage , format/system (BE SURE YOU HAVE A ROM ON YOUR SD CARD), go back
6.Install zip from sd card , Choose zip from sd card , Choose rom and Click yes!
7
Nobody can tell you which rom is better .. All roms are amazing because of the work put into them try them out one by one.. you're not going to lose anything..
Ok cool. I installed OMEGA and I like that rom. I did a factory reset and wiped the Dalvik cache and cache. Will look around a bit more but so far so good....
however same issue with the phone. But now when the call ends it says process com.android.phone has stopped. Then i hit ok and phone is ok. It doesn't automatically restart then go really slow.
No idea about this, I searched however couldn't find a answer. Lots of phones and versions of android had this issue.
Any ideas would be great guys.
morinr said:
Ok cool. I installed OMEGA and I like that rom. I did a factory reset and wiped the Dalvik cache and cache. Will look around a bit more but so far so good....
however same issue with the phone. But now when the call ends it says process com.android.phone has stopped. Then i hit ok and phone is ok. It doesn't automatically restart then go really slow.
No idea about this, I searched however couldn't find a answer. Lots of phones and versions of android had this issue.
Any ideas would be great guys.
Click to expand...
Click to collapse
You need to go into mounts and storage in recovery and format system and data before you flash, as already explained
slaphead20 said:
You need to go into mounts and storage in recovery and format system and data before you flash, as already explained
Click to expand...
Click to collapse
Is that different from what I did?
I booted into recovery. Did a factory reset. Wiped Cache and the Dalvik Cache. Then I installed the rom, did I do this wrong?
morinr said:
Is that different from what I did?
I booted into recovery. Did a factory reset. Wiped Cache and the Dalvik Cache. Then I installed the rom, did I do this wrong?
Click to expand...
Click to collapse
Factory reset wipe data, but not system, you need to format system and data
slaphead20 said:
Factory reset wipe data, but not system, you need to format system and data
Click to expand...
Click to collapse
I just booted into recover did system format and data. However I still have the same issue. After phone call freezes for a second, vibrates then says com.android.phone has stopped working.
Follow exactly what I ve typed in the previous post... exactly that.. and which version of omega have you Downloaded
??
Hit thanks if I've helped
Sent from my GT-I9300 using xda app-developers app
why not you backup your current rom first then try to flash a new rom without wipe data. if you not facing any issue on the new rom, then it's ok.
if you facing any issue, you must flash again the new rom with wipe all data. if you not happy with both, then you restore back what you are backup before.:fingers-crossed:
galaxys3lover said:
Follow exactly what I ve typed in the previous post... exactly that.. and which version of omega have you Downloaded
??
Hit thanks if I've helped
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Yes I did. I factory reset. wiped cache and dalvik as well as formatting in the advanced options. I currently have Omega 44.2 installed. But I had the iphone app crashing with AROMA 30.1 and 30.4
Is there away to uninstall the phone app and then re install that cleanly?
I did this and still have the phone crashing issue.
Settings/apps/all/phone/wipe app data, likewise do same with contacts, reboot, see if that solves it
slaphead20 said:
Settings/apps/all/phone/wipe app data, likewise do same with contacts, reboot, see if that solves it
Click to expand...
Click to collapse
I clearned the cache, should I clear the whole app? If it uninstalls how do i re install the phone app?
morinr said:
I clearned the cache, should I clear the whole app? If it uninstalls how do i re install the phone app?
Click to expand...
Click to collapse
Lol....I didn't say wipe the cache,I didn't say uninstall it.....I said wipe data
slaphead20 said:
Lol....I didn't say wipe the cache,I didn't say uninstall it.....I said wipe data
Click to expand...
Click to collapse
There is no white data. only buttons available are force stop and clear data. If I press clear data it says all data will be deleted permanently including all files, settings accounts, databases. I assumed the files were the actual app.
I went to settings. Applciation manager and chose Phone.
......hit clear data then, do that for phone and contacts storage, the data bases get rebuilt the only thing you will have to set up again is which contacts to display and any ringtone options etc you may have chosen
---------- Post added at 08:05 AM ---------- Previous post was at 08:04 AM ----------
slaphead20 said:
......hit clear data then, do that for phone and contacts storage, the data bases get rebuilt the only thing you will have to set up again is which contacts to display and any ringtone options etc you may have chosen
Click to expand...
Click to collapse
Data is just that.....Data.....it is not the apk
I am getting a fc in setup wizard after installing the Infamous ROM 4.3 "pac_p4_4.3-Infamous_20131017.zip".
Followed below steps:
1. using CWM 6.0.2.7, wipe data/factory reset
2. wipe cache partition
3. wipe delvik cache
4. Flashed Infamous ROM
5. Flashed gaps "gapps-jb-20130813-signed"
6. Reboot
after getting the fc on setup wizard i tried, 1) wiping cache and rebooting 2) reflashing the infamous rom on top again.
both solutions did not work.
I am coming from Ganbarou 4.3 ROM and before that i had Toldo's v8 ICS rom. Ganbarou ROM was working well.
Just wanted to test different JB 4.3 roms.
can someone help me out?
thanks.
Have you tried reflashing gapps?
Sent from my iPhone using Tapatalk - now Free
haven't done that yet. i will try reflashing gaps.
thanks.
ahsenz said:
haven't done that yet. i will try reflashing gaps.
thanks.
Click to expand...
Click to collapse
First you need to update your recovery to 6.0.3.6. You can get it from Droidbasement.
Secondly, before flashing you need to format system under Mounts and Storages in addition to the wipes you mentioned above.
After installation wipe cache and dalvik cache again and then reboot.
The gapps is okay as it is same as mine, and I never had any issues.
Cheers.
Sent from my GT-P7500 using xda app-developers app
John Kester said:
First you need to update your recovery to 6.0.3.6. You can get it from Droidbasement.
Secondly, before flashing you need to format system under Mounts and Storages in addition to the wipes you mentioned above.
After installation wipe cache and dalvik cache again and then reboot.
The gapps is okay as it is same as mine, and I never had any issues.
Cheers.
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
Great advice...
I also always suggest a system format...
I just wanted to add that with the older recovery...it doesn't like 4.3 gapps. You can boot after ROM flash. Then go back to recovery and flash gapps...wipe cache and dalvik before. And that will work also and I've seen gapps cause some weird issues with this device as well as my e4gt..
Or just use twrp...I've had zero issues with flashing anything since switching...
Thanks for the advice. (John and Gil81)
I followed the steps as advised i.e.
1. under Mount and Storage, format system
2. format cache
3. format data
4. flash rom, this time i flashed CM10.2/SGT7 rom.
5. reboot
everything was working smooth, so moved on to
6. flashing gaps
7. reboot and now
8. Enjoying. (restoring apps)
great work from all the developers of 4.3 roms for our device.
have not upgraded the CWM recovery yet, but please advise if it is absolutely necessary to do that. May be i would do it with any future upgrades.
also to get better understanding of the recovery, what is the difference between format data and format sdcard option?
thanks.
ahsenz said:
Thanks for the advice. (John and Gil81)
I followed the steps as advised i.e.
1. under Mount and Storage, format system
2. format cache
3. format data
4. flash rom, this time i flashed CM10.2/SGT7 rom.
5. reboot
everything was working smooth, so moved on to
6. flashing gaps
7. reboot and now
8. Enjoying. (restoring apps)
great work from all the developers of 4.3 roms for our device.
have not upgraded the CWM recovery yet, but please advise if it is absolutely necessary to do that. May be i would do it with any future upgrades.
also to get better understanding of the recovery, what is the difference between format data and format sdcard option?
thanks.
Click to expand...
Click to collapse
Formatting sdcard will wipe everything in your device including the media partition where your user generated data like pictures, videos, downloads etc and also all the files copied to the device from PC. So be careful NOT to format the sdcard.
Formatting data, on the other hand will remove your installed gapps and the associated data. This is necessary when migrating from an older ROM to a newer one that will need you to install different version of gapps that is suitable for the newer ROM. Even when crossing from one ROM to another based on the same version of android, it becomes necessary to format data to get a clean install so the data from the different ROMs do not conflict.
The recovery version, as I understand it, is necessary for the changes to the filing system of 4.3 which is different from 4.2.2. In addition it is also designed to support the multiuser feature of 4.3. I am a single user so I can't attest to how it helps there.
Cheers.
Sent from my GT-P7500 using xda app-developers app
Today I received a msg for the disponibility of an update for BlissPop-v4.0.3-i9300-NIGHTLY-20151008-0524 already installed on my I9300.
How can I flash it?
Thanks in advance
Go to recovery wipe cache & dalvik cache. Install new version. Reboot...
But clean install is best.
Sureshtuty said:
Go to recovery wipe cache & dalvik cache. Install new version. Reboot...
But clean install is best.
Click to expand...
Click to collapse
But I lose all apps, games and settings that I had installed?
umberto santulli said:
But I lose all apps, games and settings that I had installed?
Click to expand...
Click to collapse
No. Wiping cache & dalvik cache won't lose nothing. Only wiping data make u lose
Sureshtuty said:
No. Wiping cache & dalvik cache won't lose nothing. Only wiping data make u lose
Click to expand...
Click to collapse
Done !! All OK.