Hy i not English sorry bad English.
My problem:
Viper4Android---> SElinux Permissive mode enable, and installed BusyBox. 1. Open V4A 2. Enable Master Power two options (FX and Force enable V4A) Result: Music on Spotify and any music player Crackling, grating and very loud bad sound quality. What is the problem?
I did:
- Reflash the ROM
- Uninstall BusyBox and try stericcson, jrummy
- Uninstall V4A driver
- Factory Reset / Wipe Dalvik Cache
- BusyBox Clean mode, Replace all, Smart install and Uninstall Smart with Normal mode
- SElinux Mode Changer app uninstall
- Disable and uninstall MusicFX
- Check troubleshooting? Running other audio app: AlsaMixer, Headphones Volume Booster results: not troubleshooting.
░▒▄█▀▄░ █▀▄ █▀▀▄ █▀▀ █▄░█ ▄▀▄ █░░ ▀ █▄░█ █▀▀░░▒▐█▀▀▄ ▄▀▄ █▄░▄█
▒▐█▄▄▐█ █░█ █▐█▀ █▀▀ █░▀█ █▀█ █░▄ █ █░▀█ █▀▀░░▒▐█▒▐█ █░█ █░█░█
▒▐█░▒▐█ ▀▀░ ▀░▀▀ ▀▀▀ ▀░░▀ ▀░▀ ▀▀▀ ▀ ▀░░▀ ▀▀▀░░▒▐█▀▄▄ ░▀░ ▀░░░▀
Key Features
Based on @foobar66 GoogleWiz ROM
NX Kernel
Samsung SoundAlive Dolby Atmos
Shell Script Advanced Features (SSAF) *See post #2
Updates will come in small service packs instead of a complete ROM update unless necessary
Samsung Gear might work out of the box
Removed some tweaks that I deemed useless.
Removed a few Google apps (Drive, Map, YouTube, etc) from the ROM, you can install them from Play Store instead
Emergency Launcher, UltraPowerSavingMode, SmartCapture, SmartSwitch, LiveWallpaper
Removed GoogleWiz's customizing script
Installation
Backup is always recommended
You should be able to dirty flash from stock/GoogleWiz ROM
You might not be able to boot, which is why 1. is important
Install any patch or cumulative update zip.
Adrenaline Experience
Some apps that I personally use and recommend:
SolidExplorer
SwiftBlack
Fluid Navigation Gestures
Download
*Feel free to mirror, however, monetizing the download link in any way is strictly prohibited.
Google Drive
Patches & Cumulative Update
Bootloader
Source
GITHUB: Shell Script Advanced Features
Credit
@foobar66
@SoLdieR9312
@Noxxxious
@xpirt
amirzaidi for Pixel Launcher
Shell Script Advanced Features
Everything that can be done in shell script shall be done in shell script.
You will need to install a terminal emulator from PlayStore to use this function.
Current functions:
Remap Bixby Key
Change Device Name
Max Volume Warning Toggle
Enable Stereo Speaker
Navigation Bar Toggle
Immersive Mode
Set DNS
Powercfg by yc9559 @ CoolApk [EXY8895]
Host File Based Adblock
Service Disabler
Set big Cluster Max Freq
Set LITTLE Cluster Max Freq
Script OTA Self Update
Reboot Device
Reboot into Recovery
To use, type the following in a terminal emulator
Code:
su
cfg
Code
Issues
TODO/Progress
Wiki
Credits
Changelog
v1.0 - The Late Santa [26 Dec 2018]
Initial Release.
v2.0 - WorstJet [13 Jan 2019]
Reverted Samsung Camera to stock
Samsung Gallery is back to the party
Added quite a lot of files that are related to VOLTE/VOWIFI (credit), you will need to flash CSC installer to install your CSC files
NX Kernel R19
Magisk v18.0
Almost up-to-date SSAF
Flashable Update Zip
[Patch] - Smaller fix, you need to install all patches according to the number, you do not need to reboot in between patches. (Flash 1.0 first, then 2.0, 3.0 ...)
[Cumulative Update] - Bigger update containing all the previous small patches.
WorstJet
-Nothing available as of now
Previous Version(s)
The Late Santa
[Patch 1.0] 26122018
Enabled navigation bar
Added Project WIPE by yc9559 @ CoolApk, default setting is set to [Balance]
Changed config to cfg for easier access
[Patch 2.0] 27122018
Added GearManagerStub.apk
Added Launcher from amirzaidi
[Patch 3.0] 27122018.2
Updated custom menu to include adblock and service disabler
[Patch 4.0] 30122018
Fixed permissions
Minor update to SSAF
Service disabler in SSAF will now run in complete silence
Enabled UHQ tile in csc
[Patch 5.0] 31122018
SSAF now able to set DNS properly
SSAF now able to change big cluster max freq
[Patch 6.0] 03012019
SSAF now able to grab dependencies from GitHub if any is missing
SSAF now able to change LITTLE cluster max freq
Minor fixes to powercfg
[Patch 7.0] 05012019
SSAF now able to enable stereo speaker
Thanks! Haven't been able to download the ROM you're basing yours as it always hangs for me with megaupload, will try yours as I have better luck with gdrive. Slds.
well stuck on android is starting
Android is starting and no navbar,even going for settings and reenable it
pbls said:
Android is starting and no navbar,even going for settings and reenable it
Click to expand...
Click to collapse
I left the navigation bar disabled in build.prop accidentally
Edit the last line in build.prop:
Code:
qemu.hw.mainkeys=1
to
Code:
qemu.hw.mainkeys=0
and reboot.
or use the custom menu to re-enable it then reboot
or edit the build.prop and reflash ROM
EDIT:
or flash the attached flashable patch zip
how do i install the rom?
well the navbar is back and still stuck at android is starting
ps: this rom doesnt have a launcher thats why i keep stuck at android is running
Is Volte vorking? Foos original rom hasn't.
Good job ! I will test the rom i i will give u a feedback !
You will planning to add some more mods ?
Thanks.
the ROM doesn't have a launcher,you must go to the Google play to install one
pbls said:
the ROM doesn't have a launcher,you must go to the Google play to install one
Click to expand...
Click to collapse
Ah.. now I know why it doesn't boot.
navaskp said:
Is Volte vorking? Foos original rom hasn't.
Click to expand...
Click to collapse
It isn't working either
xtmzone said:
Good job ! I will test the rom i i will give u a feedback !
You will planning to add some more mods ?
Thanks.
Click to expand...
Click to collapse
I'd refrain from adding 'mod' myself that requires to be redone every security update as it wastes time.
Feature will be added to the custom menu instead as that is portable, work across updates and even devices.
Everything that's doable in shell script shall be done in shell script.
ImbaWind said:
AdrenalineROM Custom Menu
You will need to install a terminal emulator from PlayStore to use this function.
Current functions:
Remap Bixby Key
Change Device Name
Max Volume Warning Toggle
Navigation Bar Toggle
Immersive Mode
Set DNS
Powercfg by yc9559 @ CoolApk [EXY8895]
Host File Based Adblock
Service Disabler
Reboot Device
Reboot into Recovery
To use, type the following in a terminal emulator
Code:
su
cfg
Click to expand...
Click to collapse
I always get the result "permission denied"
Su rights granted to terminal emulator. Used the commands su "enter" cfg "enter". What am I doing wrong?
xxxPLETTIxxx said:
I always get the result "permission denied"
Su rights granted to terminal emulator. Used the commands su "enter" cfg "enter". What am I doing wrong?
Click to expand...
Click to collapse
Sounds like you are doing everything right, but I'm not sure why.
Can you attach a screenshot?
keyboard is not working for me
ImbaWind said:
Sounds like you are doing everything right, but I'm not sure why.
Can you attach a screenshot?
Click to expand...
Click to collapse
Sure. Hope you can help.
ImbaWind said:
Sounds like you are doing everything right, but I'm not sure why.
Can you attach a screenshot?
Click to expand...
Click to collapse
Same here,but loving the ROM nonetheless and I've installed so many
xxxPLETTIxxx said:
Sure. Hope you can help.
Click to expand...
Click to collapse
pbls said:
Same here,but loving the ROM nonetheless and I've installed so many
Click to expand...
Click to collapse
Code:
su
mount -o rw,remount /system
chmod 777 /system/bin/cfg
cfg
This should help
Hi,
This guide help you to find a correct configuration and make environment for installing EdXposed and pass SafetyNet (and more) on a official Nord rom (tested on my EU 10.5.8)
All apps pass SafetyNet, Xposed and Magisk test (bank app, tv app, pogo, mario kart, ...)
Code:
ADVICE
This method need to put SELinux in permissive mode, it's no safe for your phone security..
But almost years, all my phone is in permissive mode, no problems ever for my.
Use at your risk!
Instructions :
-Install last official android 10 version for you device
-Root your devices (follow this guide)
-(Optional) Flash TWRP Recovery with fastboot in recovery partition
-Install/upgrade Magisk/Magisk Manager in the last stable version
-Reboot
-In Magisk setting tab, disable and enable "magisk hide" switch
-Install busybox app (don't open now) (my app is by Stericson, i suppose work on other busybox app)
-Go to Magisk manager and download following module :
. BusyBox for android NDK
. App Systemizer
. Magisk for recovery (mm) (only if you have flashed TWRP)
. Debloater (only if you need to debloat app per app your phone)
. Active systemless host in Magisk options (if you need AdAway)
. Flash youtube vanced with magisk if you need vanced (install root method doesn't work for me)
-Reboot
-Check if BusyBox (1.31.1. osm0sis) is installed on /system/xbin on your BusyBox app companion
-Open terminal and tip (once at once):
Code:
su
systemize
s
c
-Create a new file called "08setperm" in /data/adb/post-fs-data.d
Put this code inside:
Code:
#!/system/sh
setenforce 0
-Install latest Riru Core in magisk manager.
-Install EdXposed Manager
-Reboot
-Go to EdXposed Manager and install the latest canary Sandhook version
-In options tab, switch on "App List Mode" and "Instant Module List"
-Browse, download and install "HiddenCore Module" on Manager
-Go on module tab and active EdXposed module and HiddenCore module
-Reboot
-Go to Blacklist tab on EdXposed Manager and enable:
. Your apps (like with magisk hide feature)
. Carrier service
. Google framework
. Google game
. Google play store
. Google play service
-Go to Magisk Manager and hide:
. Your apps
. Google play service (uncheck and check again)
-Disable usb debugging in dev options (for full spoof)
-Reboot and done!
My favorites apps/module:
. Battery charge limit (example: stop night charge at 99% and wait to discharge to 90% and charge again to 99% target)
. Migrate (the new best app saver, titanium backup is.. hum..)
. adaway (block ads, add repo on this app for better work)
. Mixplorer (cool file/root explorer)
. Materiel terminal (cool terminal, no superficial tweek)
. AodNotify (the best notification light for me..)
. Wifi Key View (show yours wifi keys)
. Liveboot (watch and save a logcat in place of boot animation)
. Alltrans xposed (translate all your apps)
. Gravitybox xposed (most customisation)
. Minminguard xposed (ad block for apps)
. LuckyPatcher + xposed module
See you!
Thanks! Did exatcly everything right. And Magisk & Xposed are prefectly hidden from my banking app. But the CompleteControl App (for VISA card) is still detecting it. I don't know what I can do to prevent that. I read in an article that "There are many files and packages that MDMs look for when detecting if a device is rooted. " like
"Su Binaries. The following list of Su binaries are often looked for on rooted devices./system/bin/su
/system/xbin/su
/sbin/su
/system/su
/system/bin/.ext/.su
/system/usr/we-need-root/su-backup
/system/xbin/mu"
---> should I therefore uninstall BusyBox? When clicking on "UNINSTALL" in the app, you get a pretty big disclaimer that you might lose funcionality of many rooted apps, so I didn't. After doing all the steps in #1 post, is it safe to disable and uninstall BusyBox? Is there an alternative to hide root from CompleteControl app? THANKS! Great work with the guide btw...
I followed the instructions, and although Magisk Manager itself thinks SafetyNet passes, other SafetyNet checkers still show it fails everything and e.g. I can't update Netflix or find it when searching the Play Store
Would you like this to get proofread to make this article readable by other people?
---------- Post added at 11:46 PM ---------- Previous post was at 11:45 PM ----------
NTWarrior said:
I followed the instructions, and although Magisk Manager itself thinks SafetyNet passes, other SafetyNet checkers still show it fails everything and e.g. I can't update Netflix or find it when searching the Play Store
Click to expand...
Click to collapse
Download an .apk and install it over Netflix. The latest one might not work, so try out a few different versions.
You quote magisk for recovery but to use it you need to access /data partition. How do you decrypt it?
I installed the current (26) Riru, installing edXposed failed (they don’t support it yet). After some searching, I installed LSPosed instead.
Now I’m passing safety net with just hide props config and no HiddenCore needed
Hey guys, I just wanted to share how I got dolby atmos and the Moto Equalizer working.
First up the official descriptions and telegram links of the mod developers:
- [Updates] Dolby Atmos and Viper4Android
Dolby Atmos and Viper4Android by @guitardedhero
Discussion group : https://t.me/joinchat/E-On6U9cxckhIlAnoPIYpw
Download here: https://t.me/viperatmos
- Audio Ryuki Mods Archives
https://t.me/joinchat/E-On6U9cxckhIlAnoPIYpw
&& @modsandco for audio mods discussion groups
Free for kang... May you will make it better...
Give me an ice tea to support my works: https://www.paypal.me/reiryuki
https://t.me/audioryukimods
WHAT DO YOU NEED?
Your phone must be rooted with Magisk.
If you don't know how, just search for it on Google/ here in our forum.
It's pretty easy.
INSTALLATION
STEP 0:
Check if your phone is permissive, if it's not do this:
Use a terminal app and type the following
su
setprop dolby.force.permissive 1
Make sure it's successful.
STEP 1:
You have to download the latest versions of the mentioned zips below:
-Dolby Atmos RC zip (recommended version)
Download here:
https://github.com/reiryuki/Dolby-Atmos-RC4-Ryuki-Mod/releases
- Moto Equalizer Zip
Download here: https://github.com/reiryuki/Moto-Waves-Edge-Maxx-Audio-FX/releases
- Audio Compatibility Patch Module(can be found in Magisk Manager)
- Audio Modification Library Module (can be found in Magisk Manager)
STEP 2:
Copy all files to your phone storage
STEP 3:
Open Magisk Manager and install the modules in this order
1. Dolby Atmos
2. Moto Equalizer
3. Audio Compatibility Patch
4. Audio Modification Library
Now reboot your phone.
You should have two new Apps now, Dolby Atmos and the Moto Equalizer.
Congratulations, you now have Dolby Atmos and Moto Equalizer!
Short Info:
The Moto Equalizer can disappear from your app drawer, it is still there though and can be accessed by going in your music player and choosing Equalizer.
Lockscreen Visualizer??
sush1101 said:
Lockscreen Visualizer??
Click to expand...
Click to collapse
That is a rom feature....so no.
Ok Thanks
Hi,
i cant install Dolby Atmos. Patching failed /system......./vintf/manifest.xml
Any solution?
Thank you
Hey, does anyone go through installation successfully? I have a problem with a driver installation - every time when I try to install, it ends with the same dialogue to install driver.
zainstaluj SElinux Mode Changer uruchom permissive i zainstaluj sterowniki mi 3 razy, gdy zostały zainstalowane
install Selinux Mode Changer run permissive and install mi drivers in 3 times they installed