Hello everyone,
So I got a phone from a friend, he said the phone just stopped working. The power button just vibrates the phone and nothing happens, I cant get into the recovery, and when I connect it on a charger it just displays it's alcatel logo and does not move any further.
I assume that the memory got wiped, but maybe I'm wrong. Anyways, it's running on MTK6580 and I tried to flash a new recovery with system and everthing else. It didn't work out. And now I need your help... I can't find a stock ROM for this phone, and I need you guys to send me one if you can. The thing is, I need to install it through the SP Flash tool, so I will need all the information in the scatter file. Like I need the recovery, system, boot and all of that stuff....
If I posted in the wrong section, I'm sorry and if something is not clear, ask me.
Thanks in advance guys!
Related
Hi guys, new to the forum, but been reading for a while now.
I need some help with my gf's device which i got messed.. So here is the problem:
Device: Alcatel One Touch S'Pop (4030x)
Carrier: Globul(Bulgarian)
Root: YES
SU Status: Installed SuperSU
Stock firmware: latest ver of Android JB 4030x modded for globul
Recovery: Selfmade CWM.
So the problem is that the device was stock and sim locked by carrier globul, what i was trying to do is root inastall cust recovery and install new rom, hoping that this will debloat the device and eventualy sim unlock it, now i am stuck with a white screen every time i try to boot it, juat after the first boot animation. Tried to go to recovery - work flawlessly. Tried re-installing the custom ROM several times with no luck.. Here is what i done:
Rooted with VRoot, then installed CWM recovery via MTK Droid Root & Tools, all worked fine, the stock (rooted) ROM booted with no problems at all (restarted couple o times)
Then i downloaded to my SD the last version of GE-Rom from MXDevelopers blog and tried to flash it via recovery, following their guide(only difference that i used CWM instead of TWRP) everything went well and nice, then i pressed "Reboot device now" option in the recovery and it rebooted, shown the 1st bootlogo and than that white screen (ofdeath) and it doesn't do anything except when i press volume down and hold it, it vibrates as when you switch silent mode on with the vol keys, also i noticed that the power button works as supposed (locks unlocks).
What i need to do is getting a custom rom working on the device, or at least a stock (non globul) rom working on it..
I tried to flash thru recovery the X9 ROM in hope it will do the job but null... I tried several times to install and re install the rom with no succes so far. What i am thinking is that i somehow damaged the boot image ( i havent touched it but i dont know if the custom rom had tried to modify it. )
Please help!!
Will click the thanks button, i promise
If anything in the given information is unclear, just ask and i will clear it for you, or in case i haven't given enough info on something..
C'mon guys.. Why nobody posting ? I followed the help request guide, i made clear what the problem is and i've given all the information that is avail. ...
I mean.. Please help, any help, advice or whatever will be highly apreciated.. You see, i'm new here but if there is something i can help with - then i will do it.. I know that some devs here do have got that model of alcatel..
I had a very similar problem to yours and
Only resolved it today. Go into XDA and search
Bricked Alcatel 4030. Wergi1 has the solution
Well it worked for me good luck.
Hello im wondering if someone could help me with the stock firmware of a gigaset qv830. Mine is bricked but can boot into recovery altought wont fully boot thanks to someone who tryed chainfire 3d on it .i dont have debugging turned on so cant uninstall file trough abd ....
Did you ever get the stock firmware? Did you figure this out?
New here
I am new here and dont know how to start a new thread, so I will start here and see what happens. Lol. I have a gigaset qv 830 tablet. I got it rooted with no problem. I then tried flashing twrp. It says flash complete and to restart, i did and now its stuck in a bootloop. Dont know the button combo to get it to do anything. Please help.
Hi Folks,
The Phone is stuck at Nubia Logo, and just stays there. TWRP was successfully installed and phone was rooted. Before actually loading the update package, i performed a wipe (delvik, system, data) and flashed a Stock Recovery. It prompted for Reboot which i did and the bad luck started.
Now, Vol-Up+Power boots into stock Recovery but unfortunately i do not have a backup nor an official Nubia ROM for the handset & hence can't do anything. Vol-Down+Power boots into Bootloader in which all the options pretty much take me back to Stock Recovery.
I know i made a stupid mistake but it would be really really helpful if anyone could please help put an end to my misery and undo this error. I have already tried discharging completely and then trying to power it back on again but to no avail.
Thanks in advance
Guys, a little help here please!!
My laptop does not recognize the device, it doesn't even appear when connected via USB Cable, although it charges alright.
I tried installing Nubia Recovery Tool but unfortunately it was in Chinese and I could not understand one word of it.
Please HELP!!
Hi Goraya,
I get a lot of answers from Pesa1234, hi is from Italy so his English is not that good.
I use the ComboRom 4.2 and in principle it is good, although I don't have fast charging.
Hello, my Alcatel Pop Up (6044D) it turns on but doesn't work at all, it stays in the Alcatel Logo.
This happened when I installed a Miui Room, when I wanted to go back to the STOCK with a backup from TWRP. The room was working, but it wasn't fast enough, that's why i tried to reverse, however in the reverse something happened in the process and it gave me an error and now I can't access to the recovery aswell, is there something I can do?
Thanks for the help!
If I can figure out a recovery for you then Ill instruct you on how to install it. goodluck!
goodmorning everybody . i am sorry about my bed english also i am sorry because i am writing this post while going to university so will check it later since my phone is broken
first of all my phone is lenovo k6 power i've rooted the phone and it works fine but sadly some apps detect root so i decided to remove it by installing other costum rom called lineages i guess like that
i was sure that the rom will work so i didn t do a buck up and i i did the wipe data system and i delet everything . when i tried to install the rom it didn t work it gives me error 225 which i search through the net and i discover that i need to change something in the rom i tried but it gives me same error
in that moment the phone stucked in boot it won t shut down either go trwp or fastboot i tried to install the official rom by Qfil but i can not since the phone did not shut down i've said i will let it to the point where the phone goes down of charge and try
i let it and now in the morning i tried but the programm didn t detect the phone also when i plug the phone to the charger it doesn t work please help guys i beg you all help and i promise i will not touch it again :crying::crying::crying::crying:
Shouldnt have been that bad
If the lineage os zip gave an error it means that it didnt install. TWRP should still be there and you should be able to bolt up back into recovery. Try doing the right button combination to power up and enter into recovery. I doubt that after installing a zip and rebooting your phone broke.
brother i installed trwp i am using the one that i did on rooting and installing superuser
any idea how can i shut down the phone to install the official rom