Hello,
I super hard bricked the Phone from my Brother and he need it for work. I flashed the wrong Stock-Rom.
No when I connect the Phone to the Computer it appears as Qualcomm HS-USB QDLoader 9008.
Is there anywhere an Option to repair it?
Thank you for your attention.
RingeHD said:
Hello,
I super hard bricked the Phone from my Brother and he need it for work. I flashed the wrong Stock-Rom.
No when I connect the Phone to the Computer it appears as Qualcomm HS-USB QDLoader 9008.
Is there anywhere an Option to repair it?
Thank you for your attention.
Click to expand...
Click to collapse
Not sure with LG maybe lgup or 1 of their tools, I saved xiaomi device as long as pc recognises it should be a way, update Qualcomm HS-USB QDLoader from device manager and restart pc disabling driver signature varification. I had to put the phone in download mode.Thats best I can do someone with more knowledge will better explain. When PC doesn't find the phone that's the end without special cable, remove any sharp objects near your brother ��
---------- Post added at 06:41 PM ---------- Previous post was at 06:03 PM ----------
Have you not got a recovery installed anymore?
I Can do nothing. It wont Turn on. The only thing is to plug it into the pc
have it powered off
hold powerup and connect it to the pc
does it start in download mode?
if yes you should be able to upload the stock rom with lgup
Keep us posted how or if you can resurrect the phone.
Can't Go to Download Mode still recognised as Qualcomm 9008
RingeHD said:
Hello,
I super hard bricked the Phone from my Brother and he need it for work. I flashed the wrong Stock-Rom.
No when I connect the Phone to the Computer it appears as Qualcomm HS-USB QDLoader 9008.
Is there anywhere an Option to repair it?
Thank you for your attention.
Click to expand...
Click to collapse
If you can't re-flash a stock ROM with LG UP, perhaps you can take matters in your own hand. But you have to viod the warranty for this. Also, you have to be able to enter fastboot mode.
Since you are from GB, I assume that you have the European H850, which can be bootloader-unlocked.
If so, you can try the following:
- Unlock bootloader
- Flash TWRP
- Flash the complete 10E ZIP file
I don't know if this works, but if your phone is messed up anyways, you can as well try this before throwing it away.
I can't do anything no charging, no turning on. Nothing. The only thing is that it is recognised as Qualcomm
Fix guide for xiaomi
If it's possible for xiaomi can't see why there isn't a way for lg.
http://en.miui.com/thread-226426-1-1.html
Did you try this
http://www.androidbrick.com/ultimat...agons-are-unbrickable-qhsusb_dload_qpst_qfil/
Sounds like you can use miflash/xiaomi tool for any qualcomm snapdragon device.
jazz452 said:
If it's possible for xiaomi can't see why there isn't a way for lg.
http://en.miui.com/thread-226426-1-1.html
Did you try this
http://www.androidbrick.com/ultimat...agons-are-unbrickable-qhsusb_dload_qpst_qfil/
Sounds like you can use miflash/xiaomi tool for any qualcomm snapdragon device.
Click to expand...
Click to collapse
Bumping
Yes, but the tool are not for the phone and won't recognise it
you didnt specify what happens when you plug in usb. the only thing you said was that you can do it instead of turning on or anything else.
When i plug in the phone the phone is still dead only the processor will be recognised. I need a tool to flash the software through QHUSB. I found boarddiag but no systemimage.tot File for the phone
Follow these steps:
1. Remove the battery
2. Put back the battery
3. Hold the volume Up and connect the USB
What happens after that? Do you have the "firmware update" screen on your phone or is still death?
Still death
RingeHD said:
Yes, but the tool are not for the phone and won't recognise it
Click to expand...
Click to collapse
The second link says for any Qualcomm processor.
Did you disable driver signature? Damn only for g3
It's looking like service centre I'm afraid.
http://forum.xda-developers.com/tmobile-lg-g5/help/qualcomm-t-mobile-hs-usb-hs-qdloader-t3391520
if you still have phone inhand conntact me for check phone...
RingeHD said:
Yes, but the tool are not for the phone and won't recognise it
Click to expand...
Click to collapse
Hey check Windows Certificate Manager (certmgr.msc). Remove ANY Certifications with "USB [something] TEST003" from "Trusted Publishers and Trusted basic certificate something (sorry I have to translate it but it is the 2nd from Current User Directory.
If you have ANY Quallcom drivers (uninstall it).
Find Qualcomm HS-USB QDLoader 9008 device under Ports (COM & LPT) and note the COMxy port (in my case it is COM3).
the same happened to me, you could solve it if you were telling me how please ...
the same happened to me, you could solve it if you were telling me how please ...
I think is possible to recover the LG G5 with this tool, but require a full compatible rom in that format, impossible to find.
Here another LG G5 bricked without the "Download" mode screen, only recognizer in USB with "Qualcomm HS-USB QDLoader 9008".
Related
Hello i have bricked my k910.
i flashed a new firmware with twrp and while flashing phone restart.
now im stuck on lenovo logo..
fastboot detect the phone but locked bootloader.
I test with qpst but Qualcomm HS-USB QDLoader 9008 is loaded 2-3 seconds and then the phone goes back to fastboot mode.
no blue LED.
now i disconnect the battery from the phone and only connect with usb+ "volume +, same problem... only detect the Qualcomm HS-USB QDLoader 9008 for few seconds.
what can i do now?
i tested already to click fast as possible to download in emmc software.. dont work.
i flashed before it brick twrp
and the system folder is empty :cyclops:
what can i do now?
gekkorist said:
Hello i have bricked my k910.
i flashed a new firmware with twrp and while flashing phone restart.
now im stuck on lenovo logo..
fastboot detect the phone but locked bootloader.
I test with qpst but Qualcomm HS-USB QDLoader 9008 is loaded 2-3 seconds and then the phone goes back to fastboot mode.
no blue LED.
now i disconnect the battery from the phone and only connect with usb+ "volume +, same problem... only detect the Qualcomm HS-USB QDLoader 9008 for few seconds.
what can i do now?
i tested already to click fast as possible to download in emmc software.. dont work.
i flashed before it brick twrp
and the system folder is empty :cyclops:
what can i do now?
Click to expand...
Click to collapse
did you see my solution for the COM/USB port problem here?
Unfortunately i'm facing a bigger isue atm :crying:
Crowds said:
did you see my solution for the COM/USB port problem here?
Unfortunately i'm facing a bigger isue atm :crying:
Click to expand...
Click to collapse
Hey, test with USB Extansion but dont work... or is 1 Meter to short?
gekkorist said:
Hey, test with USB Extansion but dont work... or is 1 Meter to short?
Click to expand...
Click to collapse
humm...not sure, mine has 4mts and it worked on 1st try
usefull tool in one place
Feel free to link your ideas :good:
http://forum.xda-developers.com/and...-tools-one-t2887839/post55673946#post55673946
Thank you
Crowds
i have the same issue, do you have a solution??
i try using a usb expansion of 10 Mts and i have the same issue, not boot no nothing.
luis0n said:
i have the same issue, do you have a solution??
i try using a usb expansion of 10 Mts and i have the same issue, not boot no nothing.
Click to expand...
Click to collapse
Sorry but that's the only solution. The one I've wrote on xda.
In fact its quite easy, the problem is when we ended up without it we stressed
For the first time it took me 1 month but then, after that experience, I've manage to make it work after 5 min. And believe me, since the first time, I've broken mine more than 20 times
Sent from my Lenovo K910 using Tapatalk
gekkorist said:
Hello i have bricked my k910.
i flashed a new firmware with twrp and while flashing phone restart.
now im stuck on lenovo logo..
fastboot detect the phone but locked bootloader.
I test with qpst but Qualcomm HS-USB QDLoader 9008 is loaded 2-3 seconds and then the phone goes back to fastboot mode.
no blue LED.
now i disconnect the battery from the phone and only connect with usb+ "volume +, same problem... only detect the Qualcomm HS-USB QDLoader 9008 for few seconds.
what can i do now?
i tested already to click fast as possible to download in emmc software.. dont work.
i flashed before it brick twrp
and the system folder is empty :cyclops:
what can i do now?
Click to expand...
Click to collapse
hi ,
I have a same problem . I can't activate download mode . It works 2-3 seconds and then the phone goes back to fastboot mode.
Did you find a solution ?
luboii said:
hi ,
I have a same problem . I can't activate download mode . It works 2-3 seconds and then the phone goes back to fastboot mode.
Did you find a solution ?
Click to expand...
Click to collapse
Hi,
no, have no solution. I try all tutorials and usw all Tricks i found in the Internet. Opst, miflash, nothing work. The 2-3 secs in donwloadmoade without a blue led is to short.
I try the tutorials on 6 different computers. Nothing.
I contact the Lenovo support in germany, usa and china, no help..
I found 2 services to unbrick the k910 with a own jtag
1 in Malaysia and 1 in romainia. But i dont trust this peoples.
I buy a new phone and put the k910 in a corner.
Sorry.
Lenovo phone... Never again
any news guy? had same problem with mine. already buy a new battery btw. sighh! when using miflash my phone didt disconnected from download mode but ended with error, while using qpst it keep connect then few second disconnected till my pc get bsod.
Send my phone I offer repair brick k910
Hi everyone.. Can someone guide me how to get my phone to be detect back as Qualcomm HS-USB qdloader 9008 instead of this Qualcomm HS-USB Diagnostics 900E.. Actually i was flashing a rom using miflash but since i didnt select flashall below.. i made the mistake of closing the miflash before the flashing was done.. Since then i cant get the mob to be detect as qdloader so it can appear in miflash. The phone right now is still in fastboot. Please is there any way to revive my phone? :crying::crying::crying:
There is already topic with 2 methods, http://forum.xda-developers.com/redmi-note-3/how-to/unbricking-redmi-note3-hardbrickhs-usb-t3351325
il183690 said:
There is already topic with 2 methods, http://forum.xda-developers.com/redmi-note-3/how-to/unbricking-redmi-note3-hardbrickhs-usb-t3351325
Click to expand...
Click to collapse
This works for people who are able to get to fastboot. I am not able to get to fastboot at all. Only EDL. Please help. Any other alternative?
Can you please check this thread.
I hope this helps.
You remind me of myself
I did the same thing in April and had to go to service center as i couldnt make it work that time, they fixed it within 24hours
But now there are lots of recovery methods that u could try
Zed4u said:
Hi everyone.. Can someone guide me how to get my phone to be detect back as Qualcomm HS-USB qdloader 9008 instead of this Qualcomm HS-USB Diagnostics 900E.. Actually i was flashing a rom using miflash but since i didnt select flashall below.. i made the mistake of closing the miflash before the flashing was done.. Since then i cant get the mob to be detect as qdloader so it can appear in miflash. The phone right now is still in fastboot. Please is there any way to revive my phone? :crying::crying::crying:
Click to expand...
Click to collapse
Try deep flash methode, just need to buy deep flash cable in market. For the guidance, please try to googling it in miui forum due to already available there.
Yesterday, one of my friend succesfull to restore her kenzo from diagnostic mode and really happy with the result.
Try the simple deep flash method mentioned here -
http://en.miui.com/thread-310325-1-1.html
I was able to recover my rn3 from 900e mode using this.
It's very simple and easy. You just need a copper wire strand to do it.
Use Deep Flash Method
I had the exact same problem so I tried deep flash method. It worked and my phone was detected by the PC as 9008. Then I could flash the fastboot rom using Miflash tool. Hope this helps.
Galaxy S3 won't turn on but is detected by PC as "relink hs-usb qdloader 9008"
Hi everyone! I was given a Galaxy s3 recently, the SC-06D variant but it doesn't turn on no matter what. It won't boot into recovery or odin mode.
However, when I plug it in the PC its detected as "relink hs-usb qdloader 9008". Is there any way to fix my phone? If so what should I do?
Any help would be appreciated
Looks like the phone is hard bricked. You could try to revive the phone by booting with a boot image from an SD card and then try to flash a stock ROM.
Alternatively, you could try a cell shop that can force flash the stock firmware.
No power at all means only jtag can recover it. Dead phone. Time to upgrade.
However, if your pc is detecting it then the board is alive but may not be in a recognisable state. You might be best looking for a bootloader for that particular board (the same as the factory would use to get the firmware on it in the first place). See this: https://goo.gl/qFcdsF
Beamed in by telepathy.
shivadow said:
No power at all means only jtag can recover it. Dead phone. Time to upgrade.
However, if your pc is detecting it then the board is alive but may not be in a recognisable state. You might be best looking for a bootloader for that particular board (the same as the factory would use to get the firmware on it in the first place).
Beamed in by telepathy.
Click to expand...
Click to collapse
Will try this method right now. Thanks a lot
I have a bricked LG v10 in Qualcomm 9008 mode. The only thing that appears on the PC is the qualcomm 9008 device in device manager. No lights on phone, nothing. I tried using Qfil to flash the phone, but i keep getting an error: 'device took 10.000 seconds to respond which is more than 3.000, this indicates your target is unstable. '
i am wondering if anybody knows what may be causing this. I bought this phone in craigslist for $25 and the owner said that it just died on him but he didnt know what was wrong. The phone is mint condition it just doesnt show any sign of life besides the recognition of it by the computer as Qualcomm HS-USB QDloader 9008
AlexCano said:
I have a bricked LG v10 in Qualcomm 9008 mode. The only thing that appears on the PC is the qualcomm 9008 device in device manager. No lights on phone, nothing. I tried using Qfil to flash the phone, but i keep getting an error: 'device took 10.000 seconds to respond which is more than 3.000, this indicates your target is unstable. '
i am wondering if anybody knows what may be causing this. I bought this phone in craigslist for $25 and the owner said that it just died on him but he didnt know what was wrong. The phone is mint condition it just doesnt show any sign of life besides the recognition of it by the computer as Qualcomm HS-USB QDloader 9008
Click to expand...
Click to collapse
May be the phone remains in the 9008 mode for a short period of time. Try by loading files in the software beforehand so that u just have to press the download button as soon as the device is detected in 9008 mode.
Secondly kindly share qfil recovery files for v10 h901 model. Let me also try this by shortening the pins to boot phone in 9008 mode.
Hello, I will describe my problem as follows
After using my cool1 for a month with no problems i decided to flash JUI 7.0.1 (with gapps etc...) on my Cool1 via TWRP but after doing it i realized it has many bugs and apps doesn't work properly. So i decided to return to EUI. After flashing the original stock firmware and rebooting the phone automatically switches off.
Power button not working, i cannot get into recovery and i tried all combinations of buttons without success.
When i connect it to the computer the red led start blinking and my computer recognizes it ONLY in Device Manager as QUALCOMM HS-USB Diagnostic 900E (COM3).
i have all the latest drivers installed.
i tried QFIL and it also recognizes it as QUALCOMM HS-USB Diagnostic 900E (COM3) and after setting everything when i click "Download" i get this error:
Start Download
COM Port number:3
Switch To EDL
Download Fail:Switch To EDL FailFailed to Switch to Emergency Download mode
Finish Download
Click to expand...
Click to collapse
MiFlash doesn't recognize the phone so nothing to do
Coolpad Download Assistant doesn't recognize the phone.
Any suggestion that would help, please... I think it's hard bricked because it cannot get into recovery nor the fastboot mode. completely dead only Red led blinking and QUALCOMM HS-USB Diagnostic 900E (COM3).
Thank you
*Let's all be nice. If you won't write for me, show me the right places, and i'll thank you. And please thank me too if I've helped you.
realblackyz said:
MiFlash doesn't recognize the phone so nothing to do
Coolpad Download Assistant doesn't recognize the phone.
Any suggestion that would help, please... I think it's hard bricked because it cannot get into recovery nor the fastboot mode. completely dead only Red led blinking and QUALCOMM HS-USB Diagnostic 900E (COM3).
Thank you
Click to expand...
Click to collapse
Hi you need to open your phone to connect test points on mainboard in order to become in QLoader 9008 mode .
Read post for more :
https://www.pantomath.xyz/how-to-re...soft-bricked-coolpad-cool-1-c103-c106-device/
Good Luck
Teddy Lo said:
Hi you need to open your phone to connect test points on mainboard in order to become in QLoader 9008 mode.
Read post for more :
To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!
Good Luck
Click to expand...
Click to collapse
thank you for replying but the problem is i don't have the tools to open the phone right in hand now and i have to buy them online.
alternative? the red led light keep glowing when i connect it to pc and i get QUALCOMM HS-USB Diagnostics 900E (COM3) is there another way to get into QLoader 9008 mode?
realblackyz said:
thank you for replying but the problem is i don't have the tools to open the phone right in hand now and i have to buy them online.
alternative? the red led light keep glowing when i connect it to pc and i get QUALCOMM HS-USB Diagnostics 900E (COM3) is there another way to get into QLoader 9008 mode?
Click to expand...
Click to collapse
Maybe , but just maybe you can try to make edl cable again I'm not sure if will work for you .
To do that follow instructions .
https://www.youtube.com/watch?v=ibu6roR1j2I
Good luck
Teddy Lo said:
Maybe , but just maybe you can try to make edl cable again I'm not sure if will work for you .
To do that follow instructions .
To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!
Good luck
Click to expand...
Click to collapse
I bought and edl deep flash cable on Amazon. it will arrive in 4-5 days then gonna try with it
realblackyz said:
I bought and edl deep flash cable on Amazon. it will arrive in 4-5 days then gonna try with it
Click to expand...
Click to collapse
Did it work with the EDL cable?
ulloa666 said:
Did it work with the EDL cable?
Click to expand...
Click to collapse
nope it's not working now i have a bricked phone + wasted 10$
i think i should really consider opening the phone for the test point method