On the Aurora Full Note7 Port threat somebody was mentioning several other roms form the Aurora Team. I've just installed the LamlazyROM (still configuring...) and I thought it would be worth opening its own threat.
So here we are: https://samsungvn.com/threads/note4-snap-dragon-lamlazyrom_note7_on_note4_ver-4-0-27-10-2016.22739/
Translate the page by Google and try it out. It looks really good! :fingers-crossed:
Worth indeed :good:
and if you don't mind tell us information about the rom ( language - speed -battery .....) after you done with configuration
aliko007 said:
Worth indeed :good:
and if you don't mind tell us information about the rom ( language - speed -battery .....) after you done with configuration
Click to expand...
Click to collapse
I definitly will do that - so let me just time to try it out.
czech language?
zarti said:
I definitly will do that - so let me just time to try it out.
Click to expand...
Click to collapse
O.K take your time ..
Thank you
thanks any link for n910f
rowad1985 said:
thanks any link for n910f
Click to expand...
Click to collapse
I have the N910F and yes there is a fix for our model on the same site you get the download link - just have a close look
In the link you can find a patch for n910f...
Just flashed and testinf. Don't get signal.... Any idea?
Enviado desde mi SM-N930F mediante Tapatalk
lonegan said:
Just flashed and testinf. Don't get signal.... Any idea?
Enviado desde mi SM-N930F mediante Tapatalk
Click to expand...
Click to collapse
wich model? wich kernel?
N910F, kernel Emotion R26 for Note 7 ports...
Enviado desde mi SM-N930F mediante Tapatalk
lonegan said:
N910F, kernel Emotion R26 for Note 7 ports...
Enviado desde mi SM-N930F mediante Tapatalk
Click to expand...
Click to collapse
find this kernel working perfectly here on my 910f
RamKernel_N910F_N7PortROM_PE1_UberTC_supersu_flash .zip
aefelix said:
find this kernel working perfectly here on my 910f
RamKernel_N910F_N7PortROM_PE1_UberTC_supersu_flash .zip
Click to expand...
Click to collapse
Thanks. Will test...
Enviado desde mi SM-N930F mediante Tapatalk
---------- Post added at 01:45 PM ---------- Previous post was at 01:17 PM ----------
After trying Ram, X-vitamin, and Echoe kernels with no luck (no signal), flashed data fix for N910F from Aurora rom and I have signal now... Will test this rom for a few hours an see....
Edit: Unusable phone interface. After connecting a call, hang button does not appear. Proximity sensor does not seem to be working on calls.
Enviado desde mi SM-N930F mediante Tapatalk
Same for me here. I've tried even AEL 10.8 and it doesn't work either. Going to try another kernel.
how flash for n910F
1-flash LamlazyROM_Note7_on_Note4_SnapDragon_4.0.zip
2-after reboot flash Path+N910F.zip ?only working on n910f? or use fix date to working?
what is the best kernal for n910f?
1-X-vitamin or 2- Echoe kernels port n7 or 3- Emotion R26 for Note 7 ports..or 4-RamKernel_N910F_N7PortROM
rowad1985 said:
how flash for n910F
1-flash LamlazyROM_Note7_on_Note4_SnapDragon_4.0.zip
2-after reboot flash Path+N910F.zip ?only working on n910f? or use fix date to working?
what is the best kernal for n910f?
1-X-vitamin or 2- Echoe kernels port n7 or 3- Emotion R26 for Note 7 ports..or 4-RamKernel_N910F_N7PortROM
Click to expand...
Click to collapse
for me (tested on my 910f) this is working flawlesly:
RamKernel_N910F_N7PortROM_PE1_UberTC_supersu_flash .zip
flash rom, let it boot 1st boot up to language choice, reboot to recovery, flash your model fix and flash kernel, reboot and have fun.
:good:
Aren't you facing issues with the dialer?
Enviado desde mi SM-N9300 mediante Tapatalk
aefelix said:
for me (tested on my 910f) this is working flawlesly:
RamKernel_N910F_N7PortROM_PE1_UberTC_supersu_flash .zip
flash rom, let it boot 1st boot up to language choice, reboot to recovery, flash your model fix and flash kernel, reboot and have fun.
:good:
Click to expand...
Click to collapse
OK THANKS
aefelix said:
for me (tested on my 910f) this is working flawlesly:
RamKernel_N910F_N7PortROM_PE1_UberTC_supersu_flash .zip
flash rom, let it boot 1st boot up to language choice, reboot to recovery, flash your model fix and flash kernel, reboot and have fun.
:good:
Click to expand...
Click to collapse
I did exactly the same but I could make any phone call.... So at the moment I'm back on Nemesis (what is for me by far the best N/ port) together with the AEL 10.8.
zarti said:
I did exactly the same but I could make any phone call.... So at the moment I'm back on Nemesis (what is for me by far the best N/ port) together with the AEL 10.8.
Click to expand...
Click to collapse
Yes, Nemesis is very good. It's a pity that doesn't have NFC...
Enviado desde mi SM-N9300 mediante Tapatalk
Related
Hello mates, all right?
We have many custom roms and we are lucky this support, but I see that there are also many users who ask only for a stock of some basis, 30a, 30c or 30f full deodex. So me and my partner Wendel Neves decided to create the project Full Deodex for us to bring to you all the beloved fully deodex stock. If we find stock's already been deodex I put this topic the download link and the credits for those who did. without further ado, below you will find the changelog than comes in deodex made by me and Wendel Neves and the download link of that are ready in time this will increase list.
Changelog:
- Full Deodex
- Root
- Improved ram management and multitasking
- Improved camera
- busybox
- Fix netflix
- Running Climate
- Patch latest security's to date the process deodex
- Modem 21c
- Radio working (when possible)
Download list
30J by Wendel Neves (May patch)
30k by Wendel Neves (May patch)
30a by Felipe Kazuto (May patch)
30e by Felipe Kazuto (May patch)
30c by Dryka Silva
30a Singapore by Felipe Kazuto (May patch + Drives GPU update)
30b India by Wendel Neves (May patch + Drives GPU update)
# Installation:
- Reboot Recovery TWRP (2.8.7.0 / 3.0.0);
- Full wipe (Dalvik, Cache, System & Data);
- Install ROM.zip
- Restart and be happy!
Any questions or problems let us comments, I hope you enjoy.
And remember that if you use any of these rom based, put the credits for the work.
XDA:DevDB Information
Project Full Deodex, ROM for the LG G3
Contributors
Felipe Kazuto and Wendel Neves
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2016-06-05
Last Updated 2016-08-07
Hello. First thanks for this roms. But the download links dont work. And which is the best base?
Enviado do meu LG-D855 através de Tapatalk
Yeah, which is the best base for the 2gb Ram version? I try to use the stock lg ROM but it always closes down the apps very fast.
Sent from my LG-D855 using Tapatalk
Thanks, I can put the patch 30J on the 30C?
de mon G3
I recommend being a separate modem with the rom because this problems in the modem, and will fix the reupar's rom but can use installing a modem separately.
paglop said:
Thanks, I can put the patch 30J on the 30C?
de mon G3
Click to expand...
Click to collapse
If you know how to do, yes.
rsimas said:
Hello. First thanks for this roms. But the download links dont work. And which is the best base?
Enviado do meu LG-D855 através de Tapatalk
Click to expand...
Click to collapse
Only testing to know
Triggered stock 30a
@Felipe Kazuto: Which tool are you using to deodex? In windows or Ubuntu? Thanks!
Sent from my LG-F400S using Tapatalk
Will work on d850 ?
Enviado desde mi LG-D850 mediante Tapatalk
ddaflorez said:
Will work on d850 ?
Enviado desde mi LG-D850 mediante Tapatalk
Click to expand...
Click to collapse
I think the title is very clear...
abeloman said:
I think the title is very clear...
Click to expand...
Click to collapse
What i mean is if there is a way to make it work on d850... Got it ?
Enviado desde mi LG-D850 mediante Tapatalk
Triggered stock 30e
chuyennho184 said:
@Felipe Kazuto: Which tool are you using to deodex? In windows or Ubuntu? Thanks!
Sent from my LG-F400S using Tapatalk
Click to expand...
Click to collapse
If it is not problem for you I answer?
Windows
Enviado do meu LG-D855
wich version to install??
hi.
i just got my lg g3 d855. 3gb ram 32gb rom
which rom do i install?
my software ver is V21a-HKG-XX android 5.0
Dryka Silva said:
If it is not problem for you I answer?
Windows
Enviado do meu LG-D855
Click to expand...
Click to collapse
Can you share your tool to deodex stock rom MM? Thanks!
chuyennho184 said:
Can you share your tool to deodex stock rom MM? Thanks!
Click to expand...
Click to collapse
Yes.. http://forum.xda-developers.com/galaxy-s5/general/tool-deodex-tool-android-l-t2972025
Enviado do meu LG-D855
@Felipe Kazuto
Hello,
can you tell me what do you have make by:
- Improved ram management and multitasking
Click to expand...
Click to collapse
Thanks.
Dryka Silva said:
Yes.. http://forum.xda-developers.com/galaxy-s5/general/tool-deodex-tool-android-l-t2972025
Enviado do meu LG-D855
Click to expand...
Click to collapse
I'm have to use this tool but can't deodex LGWeather, LGWeatherService & LGWeatherTheme. How to can deodex 3 apps weathers? Thanks!
chuyennho184 said:
I'm have to use this tool but can't deodex LGWeather, LGWeatherService & LGWeatherTheme. How to can deodex 3 apps weathers? Thanks!
Click to expand...
Click to collapse
Try putting in priv-app or deodexar twice, will not give error ?
Enviado do meu LG-D855
RamKernel is already working good on nearly all snapdragon variants of Galaxy Note 4 N910
Now here is RamKernel for N915F/FY
Kernel Special Features:
1. Latest kernel source used N910FXXS1DPK3
2. Linaro 6.1 toolchain used for compiling
3. Kernel updated to linux 3.10.60 to linux 3.10.81
4. Kcal colour calibration feature added
5. Enable last_kmsg for kernel debugging
6. Very stable, good speed, good battery, keeps device cool
For Ramkernel V3 R2 go here
For Ramkernel V4 go here
Please check main thread for latest build
Henceforth latest builds will be posted in main thread, as this thread was made for informing presence of the kernel
G8 new bro.. Happy to see a new kernel for edge... Thank a lot for ur g8 work.. Will try and update on status
In French i tell you: vous êtes mon héros mon ami. You are my hero. Thank you very much. :fingers-crossed: :fingers-crossed: :good: :good:
I cheked and confirmed it booted up... But checking on performance... However thanks a lot for ur hard work
Dear all,
I need only thanks for my thread to continue working on your model, after 10 downloads there not a single thanks to the post
Ram121 said:
Dear all,
I need only thanks for my thread to continue working on your model, after 10 downloads there not a single thanks to the post
Click to expand...
Click to collapse
We are here my dear. Thank you very much. :good: :good: :good:
---------- Post added at 07:36 PM ---------- Previous post was at 07:09 PM ----------
Camera, AOD, Night clock don't work.:crying:
Thank you for porting your work to the note edge! By any chance can you port to the N915G? I would like to test your kernel.
Can we not install new always on display apk and try to get it work?????
I got reboots.. When battery reached at 10%.... .
I installed on my 915g the device starts(heard Samsung boot sound) but display is black (on norma v10).......
Ram121 said:
Dear all,
I need only thanks for my thread to continue working on your model, after 10 downloads there not a single thanks to the post
Click to expand...
Click to collapse
I have not downloaded your kernel, but you put a thank you for your commitment
Thanks mate. we are waiting you )). thanks answering for request helping. i didnt try but i will )
SM-N930F cihazımdan Tapatalk kullanılarak gönderildi
RamKernel V3 R2
Still waiting for reply whether the build working or not, please reply I dont have N915 device so cant predict how its working,
Here is new release RamKernel V3 R2
Changelog
1. Faster than last release, still cool
2. Linux updated to 3.10.81
3. Patch applied for Dirty COW vulnerability
If someone want same build for N915G then provide stock boot.img for same
i am testing mate. v2 almostly perfect. one hour test everthing working perfectly. i did dirty kernel flash.
SM-N930F cihazımdan Tapatalk kullanılarak gönderildi
Work fine on n915f noble rom except for force close when battery reachs 10%
Sent from my SM-G935F using Tapatalk
Hi
I'm on custom rom dpj2 from 4pda.firmware n915f. Is this kernel work for me.
Thank you
fisalashour said:
Work fine on n915f noble rom except for force close when battery reachs 10%
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
now battery at %7 and no fc. just little information. im using aura v4.1
SM-N930F cihazımdan Tapatalk kullanılarak gönderildi
Ram121 said:
Still waiting for reply whether the build working or not, please reply I dont have N915 device so cant predict how its working,
Here is new release RamKernel V3 R2
Changelog
1. Faster than last release, still cool
2. Linux updated to 3.10.81
3. Patch applied for Dirty COW vulnerability
If someone want same build for N915G then provide stock boot.img for same
Click to expand...
Click to collapse
Would you do the same for n915p (sprint variant) I'll do as you asked and provide stock boot.img
Sent from my SM-N915P using XDA-Developers mobile app
catalyst05 said:
now battery at %7 and no fc. just little information. im using aura v4.1
SM-N930F cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
Hi, what's about camera on Aurora v4.1? Is it working? And AOD and night clock?
Over heating during charging and randomly during average useage
Sent from my SM-G935F using Tapatalk
Rooting Guide For Elephone S7
install twrp Recovery and Root Elephone S7,
Instructions-
twrp Installation-
The touch screen works with this TWRP??
Thanks
Enviado desde mi S7 mediante Tapatalk
FrankJHTC said:
The touch screen works with this TWRP??
Thanks
Enviado desde mi S7 mediante Tapatalk
Click to expand...
Click to collapse
Not Yet.. is necessary a kernel fix to have touch working.
You can use a workaround, using an OTG mouse to operate with TWRP
3) Boot your device into Recovery mode (TWRP) by pressing Volume UP + Power button.
Click to expand...
Click to collapse
i't not correct, please change in:
3) Boot your device into Recovery mode (TWRP) by pressing"Home Button + Power"buttons same time until Boot Menu Selection.
megthebest said:
Not Yet.. is necessary a kernel fix to have touch working.
You can use a workaround, using an OTG mouse to operate with TWRP
i't not correct, please change in:
3) Boot your device into Recovery mode (TWRP) by pressing"Home Button + Power"buttons same time until Boot Menu Selection.
Click to expand...
Click to collapse
Ok thanks for sugession, is this Correct
I did it.. And works perfect.. Thanks
Enviado desde mi S7 mediante Tapatalk
FrankJHTC said:
I did it.. And works perfect.. Thanks
Enviado desde mi S7 mediante Tapatalk
Click to expand...
Click to collapse
are u sure touch is work,
XN Logos said:
are u sure touch is work,
Click to expand...
Click to collapse
Not.. Don't work.. I mean that works the root... Sorry
Enviado desde mi S7 mediante Tapatalk
Some one else root the phone??. Since I have xposed my battery is worst.. I install greenify, power napa and Amplify.. But it's still bad .. Just three hours of average screen
Enviado desde mi S7 mediante Tapatalk
FrankJHTC said:
Some one else root the phone??. Since I have xposed my battery is worst.. I install greenify, power napa and Amplify.. But it's still bad .. Just three hours of average screen
Enviado desde mi S7 mediante Tapatalk
Click to expand...
Click to collapse
I have root, but not yet installed xposed + modules. I'm using it only with supersu, dolby atmos and adaway.
Only disappointed by touch not so accurate and sensible and general smoothness not so good if compared to some other devices with lower specs
TWRP still does not dotyk.Existuje another version? I do i have not OTG cable for the mouse.
Yea same, will there be a working touch version?
vaskovass said:
Yea same, will there be a working touch version?
Click to expand...
Click to collapse
I hope so
Enviado desde mi S7 mediante Tapatalk
---------- Post added at 01:55 PM ---------- Previous post was at 01:52 PM ----------
By the way ... Any one used the mod grorkmod_v1.1? What exactly is it worth? It's for P9000..
Enviado desde mi S7 mediante Tapatalk
TWRP 3.0.3 for Elephone S7 4g
TWRP 3.0.3 for Elephone S7 4g
Based on Android 6.0 firmware ver.Elephone_S7_4g_v1.9 / 2017年 01月 09日 星期一 18:38:41 CST
WARNING!! Strictly follow these installation instruction!
Install:
1. Flash the recovery.img using SP FlashTool
2. Enter into TWRP and Install the patch "SuperSU 2.79"
3. Reboot to the system
jemmini said:
TWRP 3.0.3 for Elephone S7 4g
Based on Android 6.0 firmware ver.Elephone_S7_4g_v1.9 / 2017年 01月 09日 星期一 18:38:41 CST
WARNING!! Strictly follow these installation instruction!
Install:
1. Flash the recovery.img using SP FlashTool
2. Enter into TWRP and Install the patch "SuperSU 2.79"
3. Reboot to the system
Click to expand...
Click to collapse
Thanks a lot my friend!
you really rock! Master jemmini, you deserve a little dotation from all users in the forums that will use your TWRP, please add donation link!
megthebest said:
Thanks a lot my friend!
you really rock! Master jemmini, you deserve a little dotation from all users in the forums that will use your TWRP, please add donation link!
Click to expand...
Click to collapse
Hello. The touch screen works with this version?
Στάλθηκε από το S7 μου χρησιμοποιώντας Tapatalk
efbill said:
Hello. The touch screen works with this version?
Στάλθηκε από το S7 μου χρησιμοποιώντας Tapatalk
Click to expand...
Click to collapse
Can it be used with a 3gb version?
Sent from my Redmi Note 2 using Tapatalk
jemmini said:
TWRP 3.0.3 for Elephone S7 4g
Based on Android 6.0 firmware ver.Elephone_S7_4g_v1.9 / 2017年 01月 09日 星期一 18:38:41 CST
WARNING!! Strictly follow these installation instruction!
Install:
1. Flash the recovery.img using SP FlashTool
2. Enter into TWRP and Install the patch "SuperSU 2.79"
3. Reboot to the system
Click to expand...
Click to collapse
Reserved
efbill said:
Hello. The touch screen works with this version?
Στάλθηκε από το S7 μου χρησιμοποιώντας Tapatalk
Click to expand...
Click to collapse
Yes, sure!
nickzeptepi said:
Can it be used with a 3gb version?
Sent from my Redmi Note 2 using Tapatalk
Click to expand...
Click to collapse
I'm not sure, Master jemmini created it on the latest kernel for 4Gb version, so i don't know if kernel are different between 4Gb and 3Gb. It's a risk to try on a different model of S7
Hi everyone !
I did flash it on my 3G/16G model and it works fine ! Thanks a lot !!
Best regards,
Philippe
EDIT: Just i didn't used the scatter file given, because it might not suit my model. I used the one given with the S7_3g_20161219205038_v1.3 firmware. I can download it somewhere if someone needs it.
jemmini said:
TWRP 3.0.3 for Elephone S7 4g
Based on Android 6.0 firmware ver.Elephone_S7_4g_v1.9 / 2017年 01月 09日 星期一 18:38:41 CST
WARNING!! Strictly follow these installation instruction!
Install:
1. Flash the recovery.img using SP FlashTool
2. Enter into TWRP and Install the patch "SuperSU 2.79"
3. Reboot to the system
Click to expand...
Click to collapse
Thank you for the amazing job dev.
I'm not the developer for this ROM, but I would like to share this clean ROM I have been using.
Link: http://mi-globe.com/index.php/rom-builder/
Select : Mi Note 2
Codename: scorpio
Click Show Expert Settings to customize your ROM.
- I usually select don't overwrite recovery.
Note: Usually you need to flash twice for it to work, sometimes you get an error 7 if you're flashing from a clean wipe, if that's the case you can either:
A. flash again, check to see there is no errors.
B. boot to system and set things up; then reboot back to recovery and flash it again (so that the symbolic links are in place), you might need to root it before flashing it.
Latest Xposed Framework: http://forum.xda-developers.com/xposed/unofficial-xposed-miui-t3367634
Consider getting the xMIUI Module to customize your experience and support SolarWarez.
edmondt said:
I'm not the developer for this ROM, but I would like to share this clean ROM I have been using.
Link: http://mi-globe.com/index.php/rom-builder/
Select : Mi Note 2
Codename: scorpio
Click Show Expert Settings to customize your ROM.
- I usually select don't overwrite recovery.
Note: Usually you need to flash twice for it to work, sometimes you get an error 7 if you're flashing from a clean wipe, if that's the case you can either:
A. flash again, check to see there is no errors.
B. boot to system and set things up; then reboot back to recovery and flash it again (so that the symbolic links are in place), you might need to root it before flashing it.
Latest Xposed Framework: http://forum.xda-developers.com/xposed/unofficial-xposed-miui-t3367634
Consider getting the xMIUI Module to customize your experience and support SolarWarez.
Click to expand...
Click to collapse
Thanks for sharing bro. Does this rom includes Multi-Lang (I´m looking for spanish)?
Regards
jorvacf said:
Thanks for sharing bro. Does this rom includes Multi-Lang (I´m looking for spanish)?
Regards
Click to expand...
Click to collapse
Is based on xiaomi.eu and is the Spanish language.
Enviado desde mi Redmi Note 3 mediante Tapatalk
strumbol said:
Is based on xiaomi.eu and is the Spanish language.
Enviado desde mi Redmi Note 3 mediante Tapatalk
Click to expand...
Click to collapse
Thank you bro. Have you tried it? It is very stable?
All xiaomi betas are stable for everyday use without problems.
I have used them in my redmi note 3 and when I have the bootloader unlocked in my Mi Note 2 I will also use it.
Enviado desde mi Redmi Note 3 mediante Tapatalk
strumbol said:
All xiaomi betas are stable for everyday use without problems.
I have used them in my redmi note 3 and when I have the bootloader unlocked in my Mi Note 2 I will also use it.
Enviado desde mi Redmi Note 3 mediante Tapatalk
Click to expand...
Click to collapse
Ok bro, thanks for the answer. About 4 days ago I sent the request to unlock the phone but until now I didn´t receive an answer . My phone has a fake rom I don´t know if this means that is unlocked. Do you know something about this?
Thanks
They are celebrating the Chinese New Year, so be patient ... my cell phone also came with a fake ROM and locked, and I had to change it with My PC Suite, but the Chinese version.
Enviado desde mi Redmi Note 3 mediante Tapatalk
strumbol said:
They are celebrating the Chinese New Year, so be patient ... my cell phone also came with a fake ROM and locked, and I had to change it with My PC Suite, but the Chinese version.
Enviado desde mi Redmi Note 3 mediante Tapatalk
Click to expand...
Click to collapse
Ok bro, so if I want to install a rom from xiaomi.eu or the one that edmondt shared I still need to unlock the phone right?
Yes, that is.
Enviado desde mi Redmi Note 3 mediante Tapatalk
strumbol said:
Yes, that is.
Enviado desde mi Redmi Note 3 mediante Tapatalk
Click to expand...
Click to collapse
Thank you bro!
can anyone please make a Cdroid Rom for the mi pad 4? its the best rom and the mi pad deserves it
moblue28 said:
can anyone please make a Cdroid Rom for the mi pad 4? its the best rom and the mi pad deserves it
Click to expand...
Click to collapse
that already exists, but it is not in xda, it is in 4pda
I have been using it for a week and it is incredible
Enviado desde mi Phh-Treble vanilla mediante Tapatalk
---------- Post added at 03:25 PM ---------- Previous post was at 03:23 PM ----------
https://mega.nz/#!LjhASQRT!KoHV_iHCcRP2KCJ1R8SX9DC7bTN378q_BRFb65TygVU
Enviado desde mi Phh-Treble vanilla mediante Tapatalk
davidroid1 said:
that already exists, but it is not in xda, it is in 4pda
I have been using it for a week and it is incredible
Enviado desde mi Phh-Treble vanilla mediante Tapatalk
---------- Post added at 03:25 PM ---------- Previous post was at 03:23 PM ----------
https://mega.nz/#!LjhASQRT!KoHV_iHCcRP2KCJ1R8SX9DC7bTN378q_BRFb65TygVU
Enviado desde mi Phh-Treble vanilla mediante Tapatalk
Click to expand...
Click to collapse
Magnetic cover supported?
Yes
NisseGurra said:
Magnetic cover supported?
Click to expand...
Click to collapse
Enviado desde mi Phh-Treble vanilla mediante Tapatalk
Tested this rom: Nav bar get disabled after 1 reboot, no way to get it back. Ideas?
NisseGurra said:
Tested this rom: Nav bar get disabled after 1 reboot, no way to get it back. Ideas?
Click to expand...
Click to collapse
Work great for me
Enviado desde mi Phh-Treble vanilla mediante Tapatalk
davidroid1 said:
Work great for me
Enviado desde mi Phh-Treble vanilla mediante Tapatalk
Click to expand...
Click to collapse
Strange, i tested few times now, every second reboot nav bar is gone. I give up cr, back to aicp
NisseGurra said:
Strange, i tested few times now, every second reboot nav bar is gone. I give up cr, back to aicp
Click to expand...
Click to collapse
I do not understand why, I use it with the new pixel bar and gestures, I have never disappeared
New update https://mega.nz/#!D6YDyYLa!iZbwczB7VxnKNa-r_IADgUc5dcZkO65twrw5O5fG7wU
Enviado desde mi Phh-Treble vanilla mediante Tapatalk
davidroid1 said:
that already exists, but it is not in xda, it is in 4pda
I have been using it for a week and it is incredible
Enviado desde mi Phh-Treble vanilla mediante Tapatalk
---------- Post added at 03:25 PM ---------- Previous post was at 03:23 PM ----------
https://mega.nz/#!LjhASQRT!KoHV_iHCcRP2KCJ1R8SX9DC7bTN378q_BRFb65TygVU
Enviado desde mi Phh-Treble vanilla mediante Tapatalk
Click to expand...
Click to collapse
everything is ok, the battery drain 0%-1% with turn off data, wifi and bluetooth and performance is better than hovcos when play games.
could you help me ask for a no gapp build?
i dont know russian, so that i cant register the 4pda account because google translate app cant read security code.
thank you very much.
I've been running this ROM for over a month now and it has been really stable, but I've got no OTA updates which I assume it won't get because it's unofficial and I haven't been able to find the source on 4pda. Has anyone got a link to updates, or heard anything about an official release?
Running the Magisk Hide Props Config allowed me to pass SafetyNet with this ROM.
Als said:
I've been running this ROM for over a month now and it has been really stable, but I've got no OTA updates which I assume it won't get because it's unofficial and I haven't been able to find the source on 4pda. Has anyone got a link to updates, or heard anything about an official release?
Running the Magisk Hide Props Config allowed me to pass SafetyNet with this ROM.
Click to expand...
Click to collapse
http://4pda.ru/forum/index.php?showtopic=915966&st=780#entry80643071
Thanks @crazyhotel was an easy update and I'll keep an eye on the thread in future. I hope it gets an official release soon.
Als said:
Thanks @crazyhotel was an easy update and I'll keep an eye on the thread in future. I hope it gets an official release soon.
Click to expand...
Click to collapse
new build released
support f2fs