Pixel App Collection
For Android 7.1 AND CM 14.1
Code:
/*
* TAKE A BACKUP BEFORE PROCEEDING
*
* I am not responsible for bricked devices or messing up your device.
*
* DO IT AT YOUR OWN RISK
*/
Includes :
Pixel Boot Animation(1080p)
Pixel Launcher v7.1.1
Pixel Dialer v7.0.13
Google Messenger v2.0.069 (3402275)
Google App v6.8.14.16
Enables Google Assistant
Gapps must be installed for proper functioning
Installing Instructions
Download the file in your Phone
Reboot into TWRP/CWM Recovery
Flash the Zip file where u have downloaded
Reboot & Enjoy
To enable Pixel Dialer
Go to Settings->Apps
Choose Configure App icon(gear icon)
Select Phone App as Phone (2nd one on the list )
To Change The Color Pixel Dialer Calling Interface
Go to Settings->Sim Cards
Select Sim Slot 1
Choose the color from color list
(The above method set Dialer color for sim card 1 )
You can do above steps for sim slot 2 to set color for 2nd sim
https://www.dropbox.com/s/tt9yhivymmd8xat/Pixel App Collection v1.zip?dl=0
Update v1.1
https://www.androidfilehost.com/?fid=529152257862684512
Is it working for cm 14.1
Sanjib B said:
Is it working for cm 14.1
Click to expand...
Click to collapse
yes, it works on cm 14.1
The Google Assistant isn't active after flash the file
Sent from my titan using XDA Labs
benmathews said:
yes, it works on cm 14.1
Click to expand...
Click to collapse
Thanks just installed it.
Everything working perfectly except google assistant it need some work.
Patatas1000 said:
The Google Assistant isn't active after flash the file
Sent from my titan using XDA Labs
Click to expand...
Click to collapse
Clear the Google App data including launcher data and search data (i.e everything)
And try again :angel: it should work
I'm currently running CM14.1 (Android 7.1) but Google Assistant is not working. How to enable it?
avishekjana said:
I'm currently running CM14.1 (Android 7.1) but Google Assistant is not working. How to enable it?
Click to expand...
Click to collapse
Did you try clearing google app data ?
After of some time the google assistant don't work anymore, I tried flashing again and deleting de Google app data and Launcher data too
Sent from my titan using XDA Labs
whenever I say OK google it takes me to the voice setup screen N after saying 3 times it works but if I exit the app n say OK google, it takes me to the setup again (even though voice was already set up)
And great job for making assistant work in moto g2 ??
Sent from my Titan
Patatas1000 said:
After of some time the google assistant don't work anymore, I tried flashing again and deleting de Google app data and Launcher data too
Sent from my titan using XDA Labs
Click to expand...
Click to collapse
I'm not sure why it doesn't works.
james11705 said:
whenever I say OK google it takes me to the voice setup screen N after saying 3 times it works but if I exit the app n say OK google, it takes me to the setup again (even though voice was already set up)
And great job for making assistant work in moto g2
Sent from my Titan
Click to expand...
Click to collapse
yes, there is bug in ok google detection . it has the same problem in nexus 6 devices too.
thanks for this wonderful collection
Will these works on stock 6.0
Sent from my XT1068 using Tapatalk
neeraj121y said:
Will these works on stock 6.0
Sent from my XT1068 using Tapatalk
Click to expand...
Click to collapse
i'm not sure of it. i didn't test it. boot animation and pixel launcher and dialer may be work but google assistant probably wont b'cuz it requires android 7.0 as base . if you want to try you can,but take a backup before you proceed
After updating pixel dialer ,if i give permission to call log history to the app then it force closes , I'm using cm14.1 and google assistant keeps on verifying my voice even though i had verified it many times
Patatas1000 said:
After of some time the google assistant don't work anymore, I tried flashing again and deleting de Google app data and Launcher data too
Click to expand...
Click to collapse
Try adding these lines to your build.prop file in the system folder in root
ro.product.model=Pixel XL ro.opa.eligible_device=true
a9* said:
After updating pixel dialer ,if i give permission to call log history to the app then it force closes , I'm using cm14.1 and google assistant keeps on verifying my voice even though i had verified it many times
Click to expand...
Click to collapse
To enable Pixel Dialer
Go to Settings->Apps
Choose Configure App icon(gear icon)
Select Phone App as Phone (2nd one on the list )
Follow the above steps it should fix dialer app crashing problem . yeah there is a bug in ok google detection
strangersinparadise said:
Try adding these lines to your build.prop file in the system folder in root
ro.product.model=Pixel XL ro.opa.eligible_device=true
Click to expand...
Click to collapse
i did that and i get a rare loop... bootogo loop instead of bootanimation haha, like a terror film the "flickering tube light"
not working makes messager and dialer crash.... assistance not appear ... im on benstalk 7.1
marianoasis said:
i did that and i get a rare loop... bootogo loop instead of bootanimation haha, like a terror film the "flickering tube light"
not working makes messager and dialer crash.... assistance not appear ... im on benstalk 7.1
Click to expand...
Click to collapse
Hi!
For the "BootLogo Loop", try this solution :-
1. Once you go into Edit mode in build.prop look for "ro.product.name=cm_titan".
2. Edit the above line to "ro.product.model=Pixel XL".
3. Add the "ro.opa.eligible_device=true" line at the end of build.prop .
4. Reboot Device
The Google Assistant should work for you now.
If it still doesn't work try clearing the data of the Google App.
Have a nice day!
Please hit the THANKS Button if this helped you. Happy Flashing!
K.Sharatchandran said:
Hi!
For the "BootLogo Loop", try this solution :-
1. Once you go into Edit mode in build.prop look for "ro.product.name=cm_titan".
2. Edit the above line to "ro.product.model=Pixel XL".
3. Add the "ro.opa.eligible_device=true" line at the end of build.prop .
4. Reboot Device
The Google Assistant should work for you now.
If it still doesn't work try clearing the data of the Google App.
Have a nice day!
Please hit the THANKS Button if this helped you. Happy Flashing!
Click to expand...
Click to collapse
i did it... i think that is because i cant flash SuperSU
Related
NEITHER MYSELF NOR XDA ARE RESPONSIBLE FOR YOUR PHONE. FLASH AT YOUR OWN RISK
Updated:10/06/14
Welcome to Snake's Venom 4.4.4 Port Build #102
The purpose of this port is to pull the newest Moto X (1st Gen) CDMA Verizon firmware and port it to the Droid Maxx/Ultra/Mini.
The benefits over the Maxx 4.4.4 update are as follows:
1) Full Google Dialer
2) Updated Gmail style email Apps
3) Fixes LTE handoff bug for T-Mobile GSM users.
4) Anything else that Motorola Commonly leaves out from the Maxx Rom
5) Native Tether Enabled
6) Circle Widget ported
7) Some report battery life improvement
CHANGELOG:
Build 102
1) Updated Baseband to 23255.127.76.00R
Build 99
1) Updated base port to Build 99
2) Updated and cleaned up Patches
3) Added Tether fixes to XT1030
4) Removed unlocked warning message from logo.
5) Removed Verizon branding from boot animation
6) Addressed Recent Apps patch bug which would report incorrect build
7) Increased Display size to 5.9 inches per @Caseyk621 Kidding haha
Build 96
1) Patched an issue which caused connectivity issues when Wi-Fi tethering to PC's.
Build 83:
1) Introduced Patched Support for Droid Mini XT1030. Shout out to @Rottgrub for his support
Build 77:
1) Patched an issue which prevented MotoConnect from functioning correctly.
Build 64:
1) Updated baseband to 4.4.4 baseband
2) Ported Circle Widget
PREREQUISITES
Droid Maxx/Ultra/Mini with Unlocked Bootloader
TWRP Recovery
RSD Lite 6.15 or Newer
RSD LITE INSTALLATION
1) Download the newest build linked-Build 102
HERE
OR HERE
OR EVEN HERE
2) Extract the package to your PC
3) Copy and paste the zips found in the Patches Folder to the root of your SD card
4) Reboot Recovery- Back Up current ROM
5) Perform factory reset in TWRP ensuring to only wipe DATA and CACHE. DO NOT PERFORM A FULL RESET WIPING INTERNAL STORAGE.
6) Reboot to Bootloader
7) In RSD lite navigate to the "Snake's Venom" XML file found in the port package extracted earlier.
8) Start RSD lite
9) Once Rebooted into the Port, Reboot to Recovery
10) Flash the "Display fix" patch in TWRP recovery. XT1030 users need to flash the XT1030 patch.
11) Reboot. Verify Success. Profit!
If you like my work here, feel free to donate and buy me a beer! Haha
FASTBOOT INSTALLATION
1) Download the newest build linked below- Build #102
HERE
OR HERE
OR EVEN HERE
Along with mfastboot attached to this post
2) Extract the package to your PC and place the contents of the port folder along with mfastboot in the same folder which you have adb setup in.
3) Copy and paste the zips found in the Patches Folder to the root of your SD card
4) Reboot Recovery- Back Up current ROM
5) Perform factory reset in TWRP ensuring to only wipe DATA and CACHE. DO NOT PERFORM A FULL RESET WIPING INTERNAL STORAGE.
6) Reboot to Bootloader
7) Now we must run the following commands below in a command prompt pointed to the folder which you copied the port to earlier
Code:
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash system system.img
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot reboot
8) Once Rebooted into the Port, Reboot to Recovery
9) Flash the "Display fix" patch in TWRP recovery. XT1030 users need to flash the XT1030 patch
10) Reboot. Verify Success. Profit!
If you like my work here, feel free to donate and buy me a beer! Haha
RECENT APPS:
Some of you may notice the recent apps button re-mapped as menu. This is due to a conflict between disabling the virtual keys and displaying the Menu. If you would like to revert this change, flash the "Recent Apps" patch in recovery. Be aware that if reverted, some apps might not display the menu button.
Circle Widget:
As you know, the Moto X does not have the Droid Circle Widgets from factory. If you would like to flash the widget, simply flash the Circle widget patch from the patches folder of the package. Credit to @CornholioGSM for the source from the Photon. Needed editing and updating to work with the Droid Maxx port.
@bigv5150 @Caseyk621 this does include the gmail style email app
As always great work
sent from "my kungfu is stronger then yours" XT1080
bigv5150 said:
As always great work
sent from "my kungfu is stronger then yours" XT1080
Click to expand...
Click to collapse
Thanks brother. This has got to be my most comprehensive yet. You flash it?
Topsnake said:
@bigv5150 @Caseyk621 this does include the gmail style email app
Click to expand...
Click to collapse
Awesome bro! I can't wait to try it! Love that you have the circles working! I'll let you know when I get a chance to flash it. Hopefully soon.
Sent From My Droid Ultra
Caseyk621 said:
Awesome bro! I can't wait to try it! Love that you have the circles working! I'll let you know when I get a chance to flash it. Hopefully soon.
Sent From My Droid Ultra
Click to expand...
Click to collapse
Sounds good!
Topsnake said:
Thanks brother. This has got to be my most comprehensive yet. You flash it?
Click to expand...
Click to collapse
Not yet I'm working night's but I'm going to when I get home
sent from "my kungfu is stronger then yours" XT1080
---------- Post added at 10:36 AM ---------- Previous post was at 10:32 AM ----------
Does this erase my SD card or does your XML script have save data. If not let everyone know to backup pictures music etc. This is basically an fxz file right.
sent from "my kungfu is stronger then yours" XT1080
bigv5150 said:
Not yet I'm working night's but I'm going to when I get home
sent from "my kungfu is stronger then yours" XT1080
---------- Post added at 10:36 AM ---------- Previous post was at 10:32 AM ----------
Does this erase my SD card or does your XML script have save data. If not let everyone know to backup pictures music etc. This is basically an fxz file right.
sent from "my kungfu is stronger then yours" XT1080
Click to expand...
Click to collapse
It is a save data script.
Ok brother rebootinig now then just have to apply the zips hey does this have the power menu mod for reboot etc. and if not do you know how to make one for the life of me I can't get apktool to recompile the framework. Hey I thought this was from the xt1060 it says xt1053. Also I think you can change the device name in the build prop to see this as an xt1080 I change mine to samsung to use miilk music and the play store sees it as a samsung.
bigv5150 said:
Ok brother rebootinig now then just have to apply the zips hey does this have the power menu mod for reboot etc. and if not do you know how to make one for the life of me I can't get apktool to recompile the framework. Hey I thought this was from the xt1060 it says xt1053. Also I think you can change the device name in the build prop to see this as an xt1080 I change mine to samsung to use miilk music and the play store sees it as a samsung.
Click to expand...
Click to collapse
It is from the xt1060. My 4.4.3 port is the xt1053. You download the right one? Lol. It does not have the reboot mod. I can do some research and make a patch for it. Been running this port for over 24 hours now. Smoothhhhhhhh
I edited the build.prop to reflect 1080 but can't get it to report as 1080 when plugged into to the computer. Will research further.
Ok can check and see if you have an option for setting in google now. When I open the app the 3 dots to get into settings is not there also you cant launch google search just by saying "ok google" from the home screen you have to open the app. Yeah I downloaded the correct one but when I connected my maxx to the computer it showed xt1053 for the sdcard. Now it says droid maxx I don't care as long as everything works and is seems to be all good except the google now.
bigv5150 said:
Ok can check and see if you have an option for setting in google now. When I open the app the 3 dots to get into settings is not there also you cant launch google search just by saying "ok google" from the home screen you have to open the app.
Click to expand...
Click to collapse
Yeah that's a compatibility issue. Working on a patch for that. For now just use the recent apps button as the menu button. Should be set like that after the display patch.
Didn't try the google now thing.
Topsnake said:
It is from the xt1060. My 4.4.3 port is the xt1053. You download the right one? Lol. It does not have the reboot mod. I can do some research and make a patch for it. Been running this port for over 24 hours now. Smoothhhhhhhh
I edited the build.prop to reflect 1080 but can't get it to report as 1080 when plugged into to the computer. Will research further.
Click to expand...
Click to collapse
To get the circles to work did you just transplant Motlauncher from the 1080? Or did you modify the app? I ask because I want to be able to use TiB to restore all my stuff. Home screens are really time consuming to set up his I like. And time setting everything back up is holding me back atm
Sent From My Droid Ultra
Caseyk621 said:
To get the circles to work did you just transplant Motlauncher from the 1080? Or did you modify the app? I ask because I want to be able to use TiB to restore all my stuff. Home screens are really time consuming to set up his I like. And time setting everything back up is holding me back atm
Sent From My Droid Ultra
Click to expand...
Click to collapse
I had to transfer permissions and lib files etc. Do this. Flash the port. Flash the display fix. Flash the circle widget. Then go to TiBu and restore data only to the launcher. That should yield the result you want. Again data only.
bigv5150 said:
Ok can check and see if you have an option for setting in google now. When I open the app the 3 dots to get into settings is not there also you cant launch google search just by saying "ok google" from the home screen you have to open the app. Yeah I downloaded the correct one but when I connected my maxx to the computer it showed xt1053 for the sdcard. Now it says droid maxx I don't care as long as everything works and is seems to be all good except the google now.
Click to expand...
Click to collapse
Is the google thing present in the maxx firmware aswell?
Topsnake said:
Is the google thing present in the maxx firmware aswell?
Click to expand...
Click to collapse
Well I found a work around I downloaded the google launcher it gave me the 3 dots to get into settings by sliding to the left screen that has google now on it. then search for google everywhere from that screen (you need to do this to get the option) and then open the settings. Click on voice and select ok google detection from there choose any screen. you will be able to now launch google even when using mot launcher. However there is still no menu in the google now app. And to answer your question yes this worked on the maxx 4.4.4. This is not a big issue I never change anything in google now and if I need to I just will change to the google launcher if I need to make any changes then switch back to the motlauncher so dont' kill yourself finding a fix it is not necessary.
bigv5150 said:
Well I found a work around I downloaded the google launcher it gave me the 3 dots to get into settings by sliding to the left screen that has google now on it. then search for google everywhere from that screen (you need to do this to get the option) and then open the settings. Click on voice and select ok google detection from there choose any screen. you will be able to now launch google even when using mot launcher. However there is still no menu in the google now app. And to answer your question yes this worked on the maxx 4.4.4. This is not a big issue I never change anything in google now and if I need to I just will change to the google launcher if I need to make any changes then switch back to the motlauncher so dont' kill yourself finding a fix it is not necessary.
Click to expand...
Click to collapse
Big, the recent apps button is the menu button. If you hit it, the menu pops up. That is unless you flashed the recent apps patch.
Topsnake said:
Big, the recent apps button is the menu button. If you hit it, the menu pops up. That is unless you flashed the recent apps patch.
Click to expand...
Click to collapse
I think you misunderstood me not the recent apps button that works fine I flashed the zip. If you open the google now app there is option for settings at the bottom of the page. There should be 3 dots so you can add or delete cards that you wish to pop up in google now. The only way to access that is through the google launcher now. Why I have no idea.
bigv5150 said:
I think you misunderstood me not the recent apps button that works fine I flashed the zip. If you open the google now app there is option for settings at the bottom of the page. There should be 3 dots so you can add or delete cards that you wish to pop up in google now. The only way to access that is through the google launcher now. Why I have no idea.
Click to expand...
Click to collapse
Its a compatibility issue. If you revert the recent apps button back to menu, you'll be able to access the menu anytime you tap that button. That's how I have mine set up.
Thats the way it was back in the droid RAZR/bionic days when we actually had menu buttons.
Topsnake said:
Its a compatibility issue. If you revert the recent apps button back to menu, you'll be able to access the menu anytime you tap that button. That's how I have mine set up.
Thats the way it was back in the droid RAZR/bionic days when we actually had menu buttons.
Click to expand...
Click to collapse
Yeah figured it was something like that it's no big deal like I posted there is a work around to get it to work and still keep the recent apps button. I would rather have that then the menu button.
Moto Actions+ "Flip for Do Not Disturb and Pick up to stop ringing" for Moto X 2014
Hi everyone,
If you are on Marshmallow and are rooted, then I have a new treat for you!
Attached is a modified version of the new Moto Actions that allows you to use the new Moto G4 actions* as well as the Lift for Moto Voice action, this will allow you to...
Place the phone face down to silence notifications and calls
Lift the phone when it rings to immediately switch it to vibrate
Lift your phone from waist to ear to trigger Moto Voice
TWRP Install Instructions (Big thanks to Junior Passos)
Download the modified Moto-Actions-Mod-02.037.02.zip to your phone
Reboot phone into TWRP
Install the zip
Reboot phone and then open Moto
Click the Stars, then Actions, then you should see the new actions!
Enable it and click learn more
Enjoy the new actions previously only released for 2015/2016 and Verizon Moto X phones
Manual Install Instructions
Download the modified MotoActions.apk to your phone
Clear the MotoActions app cache
Open your system\priv-app\MotoActions folder and rename the original MotoActions.apk to MotoActions.apk.bak
Open your system\priv-app\MotoActions\oat\arm folder and rename the original MotoActions.odex to MotoActions.odex.bak
Move the downloaded MotoActions.apk to the system\priv-app\MotoActions folder
Edit the permissions to be 0644 (rw-r--r--)
Reboot phone and then open Moto
Click the Stars, then Actions, then you should see the new actions!
Enable it and click learn more
Enjoy the new actions previously only released for 2015/2016 and Verizon Moto X phones
Return to Stock
Download the Return To Stock Moto Actions.zip
Reboot phone into TWRP
Install the zip
Reboot phone
If you found this useful, please think about donating, as it will help me bring more cool features to Moto phones
*I am not sure if the new Moto G4 actions works for other Moto models, but I think these actions are not tied to specific new sensors, so it should work... you do need the Virtual Lift Sensor for the Lift for Moto Voice however...
_
Reserved
thanx!! good app-mod, works great
Thank you very much... working perfectly on moto x 2014....
Sent from my XT1097 using xda premium
Working with xposed XT1097 MM.
Cyanogend 13
Works in cyanogend mod 13?
Very nice. Working on the VZW Stock MM Rom
Small thing I noticed in the directions:
Edit the permissions to be 0644 (rw-r---r---)
Click to expand...
Click to collapse
octet 0644 corresponds to
Code:
(rw-[B]r--r--[/B])
which is only 2 dashes following each of the 'r's, atleast as displayed in RootExplorer app.
Not sure if there's an error in the instructions or a difference in the way RootExplorer shows the number of dashes. But either way, permission 0644, is the correct setting.
Do you have a bitcoin address that you accept donations at?
Thanks for bringing the Moto app updates!
Cheers.
Edit - Also, how will the Play Store react if Moto should ever update these apps? Will it recognize a new Moto version is released etc or will I need to keep an eye out on the forums/reddit etc?
eventnick said:
Very nice. Working on the VZW Stock MM Rom
Small thing I noticed in the directions:
octet 0644 corresponds to
Code:
(rw-[B]r--r--[/B])
which is only 2 dashes following each of the 'r's, atleast as displayed in RootExplorer app.
Not sure if there's an error in the instructions or a difference in the way RootExplorer shows the number of dashes. But either way, permission 0644, is the correct setting.
Do you have a bitcoin address that you accept donations at?
Thanks for bringing the Moto app updates!
Cheers.
Edit - Also, how will the Play Store react if Moto should ever update these apps? Will it recognize a new Moto version is released etc or will I need to keep an eye out on the forums/reddit etc?
Click to expand...
Click to collapse
That's probably my bad in the instructions, I'll update it, thanks
I don't have an easy way to translate bitcoin to cash... otherwise I would have something set up, I have a bitcoin wallet, but I don't really have much in it
It should recognize that a new version is released, then it will upgrade and put the new version in the data folder, then I would have to update that one and you can either put it in the data or system folder after it's all said and done...
MotoActions was updated to 02.037.02.
I modified the apk to enable the new Moto G4 actions and replaced the icon of Attentive Display.
Replace the file in /system/priv-app/MotoActions folder (delete the oat folder)
Edit the permissions to 0644 (rw-r--r--)
Reboot and done
PS: I'll try enable gesture Raise to ear soon.
Junior Passos said:
MotoActions was updated to 02.037.02.
I modified the apk to enable the new Moto G4 actions and replaced the icon of Attentive Display.
Replace the file in /system/priv-app/MotoActions folder (delete the oat folder)
Edit the permissions to 0644 (rw-r--r--)
Reboot and done
PS: I'll try enable gesture Raise to ear soon.
Click to expand...
Click to collapse
Cool, what I wanted to try was installing it as a regular app, since it has the signatures for a regular app, this would allow it to work for anyone, even if they don't have root access
mastarifla said:
Cool, what I wanted to try was installing it as a regular app, since it has the signatures for a regular app, this would allow it to work for anyone, even if they don't have root access
Click to expand...
Click to collapse
It would be nice but this is not possible.
Even keeping the signature, the application has been modified and not have the same integrity.
Only with root to be able to change the application.
And I finally enable gesture Raise to ear.
I will attach here the apk modified to replace manually and also a zip file for those who want to install easier way via TWRP.
mastarifla said:
Place the phone face down to silence notifications and calls
Lift the phone when it rings to immediately switch it to vibrate
Lift your phone from waist to ear to trigger Moto Voice
Click to expand...
Click to collapse
:fingers-crossed:
Junior Passos said:
It would be nice but this is not possible.
Even keeping the signature, the application has been modified and not have the same integrity.
Only with root to be able to change the application.
Click to expand...
Click to collapse
Would it allow the app to be installed in the data partition instead? Potentially making it so someone can take an OTA update even if they are systemless rooted? I think that would be the best compromise
I added the TWRP package to the OP and gave you credit too!
I'll go ahead and create an uninstaller TWRP package for people needing to go back to stock for any reason...
I always get this error from the very beginning "unfortunately, moto action has stopped"...
Sent from my XT1092
varinder jaswal said:
I always get this error from the very beginning "unfortunately, moto action has stopped"...
Sent from my XT1092
Click to expand...
Click to collapse
Is this from the new Moto Actions apk? If so, I'll need to remove it from the OP till Junior Passos takes a look...
mastarifla said:
Is this from the new Moto Actions apk? If so, I'll need to remove it from the OP till Junior Passos takes a look...
Click to expand...
Click to collapse
No, its not from the new apk... This error was present in the old apk also... I am going to try installing this through TWRP... Then i will report...
Sent from my XT1092
varinder jaswal said:
No, its not from the new apk... This error was present in the old apk also... I am going to try installing this through TWRP... Then i will report...
Sent from my XT1092
Click to expand...
Click to collapse
OK, make sure that you clear your Moto Actions data/cache after booting up
mastarifla said:
OK, make sure that you clear your Moto Actions data/cache after booting up
Click to expand...
Click to collapse
Yes, i installed it through TWRP... Wow everything's fine now there is no such error... Working perfectly fine... Thanks...
Edit:- Only 'Pick up to stop ringing' is not working for me...
Sent from my XT1092
varinder jaswal said:
Yes, i installed it through TWRP... Wow everything's fine now there is no such error... Working perfectly fine... Thanks...
Edit:- Only 'Pick up to stop ringing' is not working for me...
Sent from my XT1092
Click to expand...
Click to collapse
That functionality was specifically made for the G4, so I wouldn't be surprised if you have to "train" it over time or if it need some more tweaks to get it running fine, just keep trying!
mastarifla said:
That functionality was specifically made for the G4, so I wouldn't be surprised if you have to "train" it over time or if it need some more tweaks to get it running fine, just keep trying!
Click to expand...
Click to collapse
Thanks for the reply...
I uninstalled it n reinstall by replacing the moto action apk... Now everythingz working fine...
Just to inform you... Thanks
Sent from my XT1092
Hello,
Is this only for stock rom or does it also work with custom roms?
Thnx.
Cheers
Sent from my MOTO X using XDA Labs
User @kokos00074 from 4pda has posted a FUSEd stock ROM.
It's based on the September 14 ROM. No root, no Xposed framework.
I will try this after testing Booroondook's latest 5.1.1. Kingo root works on the September ROM and I don't really need Xposed.
Original post here
Download the ROM here
Tried but getting black screen after boot
Sent from my A0001 using XDA-Developers mobile app
Luv-Kush said:
Tried but getting black screen after boot
Sent from my A0001 using XDA-Developers mobile app
Click to expand...
Click to collapse
what mcu do you have..
I would assume that because m00n61's sig says he is using a 'KLYDE MTCC 10inch for Suzuki Vitara' that this rom is for MTCC? So question is will it work on MTCB and if not then that could be the black screen problem.
Luv-Kush said:
Tried but getting black screen after boot
Sent from my A0001 using XDA-Developers mobile app
Click to expand...
Click to collapse
On my KLYDE MTCC unit the rom works (volkswagen with a EONON GA6153F)
Did you go back into recovery and did a "whipe all , clear cache" ?
First time it booted i got a black screen too , with only the top statusbar wich was non functional.
I read somwhere if going from normal to FUSE you needed to whipe everything, because the partitions are different.
After a longer then normal boot , everything needed to reinstall, i got to the launch screen. I did not try everything but the radio works , and the car info is nicer then my old one. The rest looked ok too.
Have mtcB kgl 2.83. Did wipe before and after but no go. Might try again.
Sent from my A0001 using XDA-Developers mobile app
Luv-Kush said:
Have mtcB kgl 2.83. Did wipe before and after but no go. Might try again.
Sent from my A0001 using XDA-Developers mobile app
Click to expand...
Click to collapse
Don't waste time. It will work only on MTCC.
This is for me the fastest 5.1.1 ROM to date. I guess stock ROM could have been also but I like FUSE
MTCC ONLY!
Here is my setup, step by step:
Part1. ROM install
Because this ROM includes a 5.1.1 recovery, the Rockchip Upgrade disk tool is needed.
1.Created the bootable SD
2. Also copied update.img onto a USB stick
3. Inserted both SD card and USB stick to unit
4. Started the unit
5. When prompted, removed the SD card
6. In the recovery menu, selected option 5: Update from USB and delete all
Part2. ROM cleanup
1. Set up WiFi
2. Installed Kingo root and rooted
3. Uninstalled Kingo root and Super Battery
4. Added Google account
5. Entered Play Store and downloaded Total Commander - it's my favorite file manager
6. Waited for updates to finish
7. Entered Settings->Apps, tab All and disabled all apps that I do not use, including Google Maps, Google App, PinYin IME, Gmail, Email and Exchange client
8. Started Total Commander, clicked Configure and checked the last option - root everywhere
9. Edited build.prop for DPI 160. I have a 10 inch screen and this is a good DPI. Plus, it uses less resources than 240.
10. Deleted all useless apps from /system/app and system/priv-app
11. Replaced MTC bluetooth and MTC Music with apps that can actually scale, from previous versions
12. Installed Quick Reboot from Store.
13. Rebooted
14. Installed Waze and Igo
At this point this ROM works as fast as a 4.4 ROM
Actually, it was so fast I put back Google Maps. GM is moving OK, not fast but not as annoyingly slow as before. I guess the combination GM + Xposed + Google App is way too much for these units. Luckily I have a Parrot BT borad which comes with ists own voice dialing so no real need for Google App.
pa.ko said:
Don't waste time. It will work only on MTCC.
Click to expand...
Click to collapse
m00n61 said:
This is for me the fastest 5.1.1 ROM to date. I guess stock ROM could have been also but I like FUSE
MTCC ONLY!
Here is my setup, step by step:
Part1. ROM install
Because this ROM includes a 5.1.1 recovery, the Rockchip Upgrade disk tool is needed.
1.Created the bootable SD
2. Also copied update.img onto a USB stick
3. Inserted both SD card and USB stick to unit
4. Started the unit
5. When prompted, removed the SD card
6. In the recovery menu, selected option 5: Update from USB and delete all
Part2. ROM cleanup
1. Set up WiFi
2. Installed Kingo root and rooted
3. Uninstalled Kingo root and Super Battery
4. Added Google account
5. Entered Play Store and downloaded Total Commander - it's my favorite file manager
6. Waited for updates to finish
7. Entered Settings->Apps, tab All and disabled all apps that I do not use, including Google Maps, Google App, PinYin IME, Gmail, Email and Exchange client
8. Started Total Commander, clicked Configure and checked the last option - root everywhere
9. Edited build.prop for DPI 160. I have a 10 inch screen and this is a good DPI. Plus, it uses less resources than 240.
10. Deleted all useless apps from /system/app and system/priv-app
11. Replaced MTC bluetooth and MTC Music with apps that can actually scale, from previous versions
12. Installed Quick Reboot from Store.
13. Rebooted
14. Installed Waze and Igo
At this point this ROM works as fast as a 4.4 ROM
Actually, it was so fast I put back Google Maps. GM is moving OK, not fast but not as annoyingly slow as before. I guess the combination GM + Xposed + Google App is way too much for these units. Luckily I have a Parrot BT borad which comes with ists own voice dialing so no real need for Google App.
Click to expand...
Click to collapse
If you pre-install Xposed and @dsa8310's MCU fooling addon (can remember the name of it offhand) it WILL work on MTCB as well.
By the way it WILL work as is on units running the last 2 or 3 versions of MTCB KLD6 MCUs as these can run MTCC ROMs.
typos1 said:
If you pre-install Xposed and @dsa8310's MCU fooling addon (can remember the name of it offhand) it WILL work on MTCB as well.
By the way it WILL work as is on units running the last 2 or 3 versions of MTCB KLD6 MCUs as these can run MTCC ROMs.
Click to expand...
Click to collapse
If there is no built-in xposed and exact dsa fooling module, how to preinstall xposed and mod on ROM prior to required Factory reset in recovery needed to rebuild fused partitions?
pa.ko said:
If there is no built-in xposed and exact dsa fooling module, how to preinstall xposed and mod on ROM prior to required Factory reset in recovery needed to rebuild fused partitions?
Click to expand...
Click to collapse
Doh, soz, I m guilty of not reading the first post correctly and assuming that it was @m00n61 who built the ROM and therefore could also inject Xposed, when actually he just found it on 4pda.ru
But theres no reason why Xposed and root cant added by someone on their pc before its used on a unit.
I left the rom unrooted , is it normal that when i go to settings , apps , i cannot disable the gallery app ?
What is special about the gallery app ?
bk227865 said:
I left the rom unrooted , is it normal that when i go to settings , apps , i cannot disable the gallery app ?
What is special about the gallery app ?
Click to expand...
Click to collapse
Its normal behaviour on Android - the gallery app is a system app and can only be removed if youre rooted.
INSTALLATION
With custom TWRP recovery
1.If you have installed one rom, which came with your mobile, official or not or If you have the Indian Stock Miui see 6b & 6c.. You must have battery over 80% and of course have TWRP. The rom is stable release without root. If you want root see the instructions. My advice : if you are happy with your curent rom dont change it. Make full backup first to have it.
2. We put the rom bulk on the mobile (not in a folder) or a USB / OTG
4. Turn off our phone through the system or by pressing the right button (on / off).
5. Than on mobile press simultaneously for some time the volume up button (+) & on / off up to write LeEco Recovery and then leave it.
6. Enter to the TWRP recovery and if you have the previous 20s, press Wipe> advance wipe and select (Data & Cache & ART DALVIC cache) known factory reset. We slide right to do. Or just drag the slide down to the right to be alone. It can work just fine with the 2 wipes only (Cache & ART DALVIC cache) and stay all your applications in place, but the right is the previews step. Go on step (7)
6b. only [/ B] If you are from stock Indian with encryption already full wipe & Internal Storage and after put the Rom on mobile through TWRP and flashing.
6c.b If you are with another rom CM, Miui, Mokee etc., Advance wipe and select all except[/ B] Internal Storage.
7. Go back on first TWRP page, press INSTALL and find the rom to choose and do slide right to install. When finishes do not do anything it reboots to system.
9. The first start will not be long just about 3 min & 18 seconds!!.
10. When you enter the system and after you finish your settings, go to Settings - Phone information - press 7 times in a row in version number - (so you become programmers) then go back - Developer options - both within and check: USB debugging and down there that says (three are gathered) window animation scale, transition animation scale, Scale Animator duration, step inside them and choose everywhere like numbers 0.5 to go more fast than ever! All so if you want go on tab phone info, press my upper logo and see all my work/roms.
12. If you are facing problems with video streaming - live - sending etc on Instagram - Facebook - Google Duo app - Watsup etc flash this through TWRP after finishing the installation and system settings.
Link>>> https://mega.nz/#!sJUBUIoK!OCyhMtpLmfIym5QsjBDnB_qes58-3Zopyj0CH-G-MjQ
13. Whoever wants to put root & xposed just put those patch-zips (first root then xposed).
1. Root>> https://mega.nz/#!UB1GXAhJ!3sjZ58B8iKJjtjTbr8VzS7uKDihkE3yB_98Lc9gcxPg
2. Xposed>> https://mega.nz/#!AZlxmDSD!Ohit_E5auurvMw7A3EO2EQySP8B6GMHZzMYT1Jmqd0s
All with TWRP to install them without wipe before and after and then through the system make update/download through cloud in XposedInstaller 3.1.1.apk and press install give root rights reboot and you are ready.
14. For patches V4A check this https://forum.xda-developers.com/showpost.php?p=71698629&postcount=663
145 Enjoy your new rom!
ChangeLog
Rom is working very smooth with all components. Is a result of patch/update rom from this source>> bbs.le.com/thread-2324110-1.html
Rom has 85 Languages to choose your own (framework & settings).
Debloat all China Applications: Live, LeSo, LeMall, LeStore etc.
Improved applications for better response sign/zipalign at boot.
Init.d support & sqlite scripts. Moded APN & gps.config for EU/International.
Default the Greek language in Setup. Choose your one. All so let be China Location.
Add Greek translations with 22,000 rows, where possible approximately 99%.
Add to build.prop tweaks for battery ,better CPU-GPU response, fast mobile signal, direct call, 4G-Lte as default, GPS config for EU satellites, by locking in 10seconds. and more!
All GAPPS included! Rom has preinstalled YouTube,Chrome,SwiftKey. Be cearful if you upgrade them may be not working the shortcuts.
Preinstalled is now the moded stock Launcher debloated from Chinese Windows with many languages, options and settings, including additional themes, 3D, Iron, Crystal, IOS7, etc., to choose from. Choose from themes store and apply.
Added new alarms, notifications, for sms, e-mails etc.
Added all LEui themes that work nicely with our new Launcher.
Add possibility adb, mtp, shell without limitation, changing the kernel
The camera is all ready set, to support cam2API for LiveVideo, messenger/facebook etc. Just use previews version of those from internet and not from play store.
Download Link
https://mega.nz/#!hVlFSSBD!TdmK9_O03753qJGxlUAaukiV3hT1dw5nKfU2seZe2Ik
Languages & Screenshots
XDA:DevDB Information
[LeMax2][5.9.022S]CrisBalGreece/Stable/Root/Xposed/80Lang, ROM for the LeEco Le Max 2
Contributors
CrisBalGreece
Source Code: http://bbs.le.com/thread-2324110-1.html
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Testing
Created 2017-02-08
Last Updated 2017-02-12
Finally! It was about time.
Thank you, Cris.
Sörnäinen said:
Finally! It was about time.
Thank you, Cris.
Click to expand...
Click to collapse
Thank you for trying my roms. Everything works great now.
CrisBalGreece said:
Thank you for trying my roms. Everything works great now.
Click to expand...
Click to collapse
Hi Cris ,
big thanks again for the great rom!!!
Request...
1. could we replace all leeco apps like browser, dialer, calculator, calendar etc with google apps please?
if possible Gdrive link please...
thanks
---------- Post added at 07:58 AM ---------- Previous post was at 07:56 AM ----------
xuser_ said:
Hi Cris ,
big thanks again for the great rom!!!
Request...
1. could we replace all leeco apps like browser, dialer, calculator, calendar etc with google apps please?
if possible Gdrive link please...
thanks
Click to expand...
Click to collapse
also, is it possible to have feature like livedisplay (or any other inbuilt way to have warmer color display except leeco color mode etc..)
xuser_ said:
Hi Cris ,
big thanks again for the great rom!!!
Request...
1. could we replace all leeco apps like browser, dialer, calculator, calendar etc with google apps please?
if possible Gdrive link please...
2. also, is it possible to have feature like livedisplay (or any other inbuilt way to have warmer color display except leeco color mode etc..)
Click to expand...
Click to collapse
1. Yes i can remove all Leeco apks and make new rom without all this but all the SYSTEMUI shortcuts it will not working then through the down left virtual button. I can't put all the apks that you said because they don't have (all) appache licence to use it.
2. No for the moment but in the future i will try.
Hi Cris
thank you again
what's difference between 20s and 22s rom?
can you say to us
dadashi.reza said:
Hi Cris
thank you again
what's difference between 20s and 22s rom?
can you say to us
Click to expand...
Click to collapse
All most nothing! Except the new kernel (with some modifications-read the OP-) and some updated libraries with apks that supported. All the others is the same like 20s. If you are whaiting to find on this rom, some new interface actions (except the Launcher) you don't find it. Except of cource my modifications
CrisBalGreece said:
1. Yes i can remove all Leeco apks and make new rom without all this but all the SYSTEMUI shortcuts it will not working then through the down left virtual button. I can't put all the apks that you said because they don't have (all) appache licence to use it.
2. No for the moment but in the future i will try.
Click to expand...
Click to collapse
ok then, will wait for clean(after removing all leeco apps) 22s ROM
will add apps later through playstore
Thanx for you work! Flashed it yesterday and all fine but as other also write: there are still to much cn apps, browser which only has cn search,background app, wallet, theme store .. And geofence seems not to work in europe, i can set my location for wifi switch on/off and loundness but it doenst work.
And another question: why work the long press homebutton not with google? On other phones there is no problem but on the max 2 i cant set to open google with long press homebutton, with no rom (test mokee, RR)
tasar said:
Thanx for you work! Flashed it yesterday and all fine but as other also write:
1. there are still to much cn apps,
2 browser which only has cn search,
3 background app,
4 wallet,
5 theme store ..
6 And geofence seems not to work in europe,
7 i can set my location for wifi switch on/off
8 loundness but it doenst work.
9 why work the long press homebutton not with google? On other phones there is no problem but on the max 2 i cant set to open google with long press homebutton, with no rom (test mokee, RR)
Click to expand...
Click to collapse
1. All the remaining apps by me has left because they are necessary for store and stock launcher to download themes and fonts.
2. Stock browser has all search providers. The 3rd from the end is Google the 2nd is BING etc. Change local to US or other countrys to see them on English. Stock browser is necessary for scanqr code to working.
3. Background app???
4. Wallet yes it's not necesary apk.
5. Theme store is on China language but i manage to translate it to greek that's why is inside. All so the themes inside is for global use and there are very nice.
6. I dont use it all so but maybye other users can and is needed for wifi smart lock.
7. For me working perfect maybye you make something wrong?
8. Loundness??? Dolby Atmos?/ Working ok here...
9. Install the apk, make it system app, give the proper symlinks to open it from there. With China location there is'nt this feature.
Many thanx chisbal!!
Backgound is my free interpretation of wallpaper, because english is not my favorite language and school is a longggg time ago The are many cn wallpapers/letters but its ok
Stock browser ok, dont know that because its very difficult for me to read cn
With loudness i mean the option´s under geofence (in telephone manager). In geofence you can set locations and then wifi/loundness switch automatically when you in this location (you know the app Llama? its similar) But this downt work and it looks like this uses "Baidu", because there is a small logo from Baidu.
Do you know, why long press home button not work with google? It opens only MIUI special settings to assign the keys.
tasar said:
Many thanx chisbal!!
Do you know, why long press home button not work with google? It opens only MIUI special settings to assign the keys.
Click to expand...
Click to collapse
The stock browser all so i manage to translate him on Greek. Like i say on my previews post, you must nstall the apk, make it system app, give the proper symlinks to open it from there. With China location there is'nt this feature only the special settings.
Problem solved. Sorry for bothering.
Sörnäinen said:
Sadly I can't download from Mega. It says download link not available?
Click to expand...
Click to collapse
Witch link? Rom? Xposed? Root?
CrisBalGreece said:
Witch link? Rom? Xposed? Root?
Click to expand...
Click to collapse
I had a typo.
But: The Xposed link isn't working. It says file not available?
Sörnäinen said:
I had a typo.
But: The Xposed link isn't working. It says file not available?
Click to expand...
Click to collapse
Please try again. Just check it and working. Maybe some Mega malfunction. Just re-posted.
CrisBalGreece said:
Please try again. Just check it and working. Maybe some Mega malfunction. Just re-posted.
Click to expand...
Click to collapse
Thank you!
It works now.
I wonder if it was rather the XDA app, to be honest. Maybe the old link was still in my cache?
Anyway, it works! I'm happy.
Sörnäinen said:
Thank you!
It works now.
I wonder if it was rather the XDA app, to be honest. Maybe the old link was still in my cache?
Anyway, it works! I'm happy.
Click to expand...
Click to collapse
Thank you for your trying and sorry about that.
Don't forget to follow the steps upon installing.
CrisBalGreece said:
Thank you for your trying and sorry about that.
Don't forget to follow the steps upon installing.
Click to expand...
Click to collapse
There are quite many, yes. I will take care.
Sörnäinen said:
There are quite many, yes. I will take care.
Click to expand...
Click to collapse
No they are 3 steps but I'm hyper analyzing them.
Put xposed and on system go to apk press the cloud give root rights and reboot. That is all.
Welcome to my mod.
With this script, we will remove applications to improve the user experience, a longer battery life and more free RAM.
The script is compatible with Emui9, that is, it is valid for Huawei P20 and its variants, for the Huawei Mate 20 and its devices and any device that has the Emui9 software, possibly also worth it for the 8 (the spectrum of applications is very broad, but since I am not a possessor, those mobile phones will have applications that do not reach).
Download link: https://mega.nz/#F!qRl2xIIC!fwbmZBpAZ_Qf0Qj7o7e_Rw
This mod will be updated with each monthly EMUI update (in case applications have been added),
If you want to add an apk to remove it, simply download appinspector, open the application and pass a screenshot of the application to remove it.
Thanks to @soundoyster, without him, this would not have been possible.
Any error or error please notify.
You also have my Youtube channel for questions.
I do not have to say that I do not take responsibility for your phone to explode, make it rain money, a prostitute leaves the cell phone and sucks you and a thousand other things.
Greetings.
PD: Do not open it from your mobile, the file manager of .rar is garbage, you have to use winrar from the computer!
Instructions inside the rar (in Spanish, so use the translator).
Additional instructions: Enable USB debugging when the phone is connected and accept all the windows that come out.
Sorry bad english.
How do we use this on AL001 stock latest firmware will it work? update okay it worked thanks.
GREAT SCRIPT
This removes a significant amount of crap and makes the L00 about 99% as close to Global L29 you can get.
** UPDATED **
1. Hold back functions for Pen, Google search box, Calendar Sync, and SwiftKey
2. Remove bloatware in newest build.
3. ** Remove crappy Huawei launcher **
INSTRUCTIONS:
1. Download SwiftKey and install
2. Install your fave home launcher - I use Evie
3 Download rar in OP from Youtube_Ll0r3nt3 and replace
4. Download attached revised command file for EVR-L00 build 9.0.0.185.
5. Replace commands.txt with mine (2 above)
6. Power off
7. Hold down BOTH Volume+ and Power until HUAWEI logo appears
8. Select wipe cache from menu
9. Reboot
10. Enjoy !
(I am working on a script that will install Google Apps etc in addition)
Very nice thanks a lot
Tweetytek said:
GREAT SCRIPT
This removes a significant amount of crap and makes the L00 about 99% as close to Global L29 you can get.
** UPDATED **
1. Hold back functions for Pen, Google search box, Calendar Sync, and SwiftKey
2. Remove bloatware in newest build.
3. ** Remove crappy Huawei launcher **
INSTRUCTIONS:
1. Download SwiftKey and install
2. Install your fave home launcher - I use Evie
3 Download rar in OP from Youtube_Ll0r3nt3 and replace
4. Download attached revised command file for EVR-L00 build 9.0.0.185.
5. Replace commands.txt with mine (2 above)
6. Power off
7. Hold down BOTH Volume+ and Power until HUAWEI logo appears
8. Select wipe cache from menu
9. Reboot
10. Enjoy !
(I am working on a script that will install Google Apps etc in addition)
Click to expand...
Click to collapse
After 195 update
Stock launcher failed to remove
rowihel2012 said:
After 195 update
Stock launcher failed to remove
Click to expand...
Click to collapse
yes 195 update
not remove launcher
badcrow35 said:
yes 195 update
not remove launcher
Click to expand...
Click to collapse
... And you did install which launcher before running this?
Tweetytek said:
... And you did install which launcher before running this?
Click to expand...
Click to collapse
nova laucher install
1|HWEVR:/ $ pm uninstall -k --user 0 com.huawei.android.launcher
Failure [DELETE_FAILED_INTERNAL_ERROR]
Run nova before running the script. Make sure nova is running
Tweetytek said:
Run nova before running the script. Make sure nova is running
Click to expand...
Click to collapse
yes working nova runing and running the script
error
Failure [DELETE_FAILED_INTERNAL_ERROR]
https://youtu.be/wQnumyxQE98
You must have set unlocking password before use any 3rd party launcher. Also, try put 3key navigation, not gest. Maybe helping
Are you running the script in a admin command window?
Tweetytek said:
Are you running the script in a admin command window?
Click to expand...
Click to collapse
yes not working :crying::crying:
This script made much free ram before was loke average 2.5gb available now is 3+gb awesome work
Yea confirm
HUAWEI banned us form removing stock launcher
That's my last HUAWEI phone
No... Launcher CAN and HAS been removed using my instructions.. I am running Evie launcher.. No probs on my Chinese L00.
Those who cannot remove launcher...
Do a factory reset and try again. IT WORKS
Tweetytek said:
No... Launcher CAN and HAS been removed using my instructions.. I am running Evie launcher.. No probs on my Chinese L00.
Those who cannot remove launcher...
Do a factory reset and try again. IT WORKS
Click to expand...
Click to collapse
Did it twice after factory reset and failed
hello i didi everything and it is perfect..but i need twin app functionality.
is there a way in order to restore EMUI stock launcher?
afico said:
hello i didi everything and it is perfect..but i need twin app functionality.
is there a way in order to restore EMUI stock launcher?
Click to expand...
Click to collapse
1. Change the Huawei app gallery to China and search "華為桌面”, it will be installed as system app.
thanks a lot, fixed!
can i ask you how to remove Yellow pages in the stock phone dialer?