Hi guys, I flashed cm-13.0-20160820-SNAPSHOT-ZNH5YAO0J2-i9300.zip and everything worked fine BUT I did a factory reset from the system itself not from the recovery and since then my phone is stuck between samsung logo and twrp logo which appears only for a second or two and then back at samsung logo....I cant enter download or recovery mode, I cant turn my phone off, every time I put battery in it, it keeps looping. But I have noticed that when i connect it to my PC it just loops in samsung logo not between twrp and samsung. Help me please ASAP :crying::crying:
Do you have a USB jig to force download mode?
I dont have USB jig, is there any other options? My phone can get to that download mode by pressing buttons and it shows only for a second screen of download mode and then it goes back at looping....
Could be a power button problem?
Well I really dont know because I had removed the button before, it didnt work correctly and now I cant know is it up to button or the software ....
Related
So here is a quick overview of a problem.
Had Cyanogen mod installed on the phone and something went wrong for no apparent reason. The phone just got stuck on the infinite loop and the recovery would not load as well. So I flashed the phone to stock firmware and that did not help (Did it with odin and kies) also tried installing clockwork mod but that did not help neither. Phone restarts and get stuck on Samsung loading screen. When I go to download mode phone also restarts after few seconds of me being in download mode(But after few restarts is stops, so that makes DL mode available) . Recovery menu is not available(Displays a broken robot with no errors on the bottom and also restarts after few seconds of me being in recovery menu). If anyone would help me out with this I would really appreciate it.
Restarting in download mode is usually a stuck power button, try giving it a wiggle before you insert the battery.
Flash a full stock rom with odin, then boot straight into recovery and factory reset. Look for any error messages in recovery.
I have a samsunng galaxy note 2. I installed DN3 v3.0 2 days back. The phone was working fine. Today I installed an app from outside and was using it until my phone battery went low. SO I swapped the battery as I normally do. But this time phone wouldn't boot. It is stuck in a boot loop. As I put the battery, PHONE WOULD AUTOMATICALLY TURN ON!!!
And it will stick on the " samsung galaxy note2" screen. Then the screen would go black for a second or two and repeat. I pulled out the battery and put it back, again the same. I tried putting back the old battery, but in vain.
I cannot access recovery mode, and when I try to enter download mode, the phone would stick to that screen where it asks either to press volume up or volume down button to enter or exit download mode, and then again it would try to boot and stuck to boot screen.
Please help me, I don't know what to do.
Hello,
Im having a problem with booting. The phone keeps trying to boot in recovery and its failing doing so. CWM recoverylogo appears for a few seconds and then restarts the phone again. And also there is one mroe problem VOLUME DOWN key doesn't work and I am not able to enter download mode....
Thanks.
Try a usb jig, if download mode isn't working then you have a brick.
hello im having a problem with my phone i just flashed it to android revolution hd and success then it tried to boot into home screen but stayed on the logo screen for ages then i tried to reboot into recovery mode but it just goes to logo screen then i went into odin mode but and it wont detect my phone and then i plugged my phone into wall charger and it goes to logo screen and then stays at logo screen and tried to boot into recovery mode but doesnt do anything
I hope this helps
kewlpanda said:
hello im having a problem with my phone i just flashed it to android revolution hd and success then it tried to boot into home screen but stayed on the logo screen for ages then i tried to reboot into recovery mode but it just goes to logo screen then i went into odin mode but and it wont detect my phone and then i plugged my phone into wall charger and it goes to logo screen and then stays at logo screen and tried to boot into recovery mode but doesnt do anything
Click to expand...
Click to collapse
Hallo there,
I hear you there there are a lot of people who face the problem you are facing but what you need to do is to troubleshoot the phone
* Make sure the USB cable is working fine if possible try it on another phone.
* Is any of your phone buttons faulty this you can judge by the last time you used the phone.
* Are the computers USB ports functioning properly
If the answer to the above questions is they are all working then continue reading else stop reading and fix the above mentioned problems
To get into download mode you need to press vol up + Home button and then switch on the phone MAKE SURE THAT THE USB CABLE IS NOT CONNECTED this is important because when the USB cable is connected you cannot go into download mode at all.
Now you can download your ROM from sammobile and let the flashing begin.
What is working so far
Recovery mode
Download mode
Phone boots but its stuck on 2nd boot animation.
My galaxy s6 edge (T-Mobile - SM-G925T) has been bricked. I flashed the stock android M 6.0.1 firmware through Odin and now my phone does not boot past the second boot animation.
The phone also has a blue led indicator on at all times during this brick.
I tried going to stock recovery and factory resetting the phone with no luck and its still stuck on 2nd boot animation.
I have tried to restore the phone with smart switch but it asks for my serial number which I do not have.
The serial number is not on the back of the phone and I doint have the box.
I put the phone in to download mode and hit the home button to show the "bar code" option but it does not display the serial number at all and its just blank.
I put the phone into download mode tried to flash stock firmware and twrp but it just stays on setup connection in odin by powering off the phone, holding vol down, home power, and vol up again to enter download mode.
But before what I did was I typed the adb commands on my computer to reboot the phone into download mode so I could flash files to the phone through odin but I caint send adb commands to the phone due to this brick.
I did try adb side load in the stock recovery and I tried to side load the stock rom as a flashable zip but it does not want to sideload.
Please help me to solve this problem, thank you very much, I will appreciate all the help.
fahad999 said:
What is working so far
Recovery mode
Download mode
Phone boots but its stuck on 2nd boot animation.
My galaxy s6 edge (T-Mobile - SM-G925T) has been bricked. I flashed the stock android M 6.0.1 firmware through Odin and now my phone does not boot past the second boot animation.
The phone also has a blue led indicator on at all times during this brick.
I tried going to stock recovery and factory resetting the phone with no luck and its still stuck on 2nd boot animation.
I have tried to restore the phone with smart switch but it asks for my serial number which I do not have.
The serial number is not on the back of the phone and I doint have the box.
I put the phone in to download mode and hit the home button to show the "bar code" option but it does not display the serial number at all and its just blank.
I put the phone into download mode tried to flash stock firmware and twrp but it just stays on setup connection in odin by powering off the phone, holding vol down, home power, and vol up again to enter download mode.
But before what I did was I typed the adb commands on my computer to reboot the phone into download mode so I could flash files to the phone through odin but I caint send adb commands to the phone due to this brick.
I did try adb side load in the stock recovery and I tried to side load the stock rom as a flashable zip but it does not want to sideload.
Please help me to solve this problem, thank you very much, I will appreciate all the help.
Click to expand...
Click to collapse
Try again to flash this
http://www.sammobile.com/firmwares/download/89343/G925TUVS4EPH2_G925TTMB4EPH2_TMB/
If it sticks on setup connection again, try a different usb port.
If after this it still bootloops try again to flash twrp and if this works wipe cache/dalvik.
If it doesn't work and just bootloops tell me of any errors you get during the process.
Thank you for the help! I hit the thanks button. I found out why Odin was stuck on setup connection and that was because I was using a bad USB cable, so I tried another cable. After that odin was not stuck on setup connection. Then I flashed stock firmware on Odin and now the phone works!. Thank you for the help!