Related
Hello,
Today I have flashed my redmi note 3 SD with MIUI 8.1.10 MHOMIDI through MiFlash Tool via edl mode.
It flashed successfully but unfortunately it stucked on Boot Animation it's not moving forward from boot animation.
Can anyone please help me regarding this issue.
Thanks.
hi
im not a pro,
but i faced "similar problem" before during flashing..
many time.. hue,
so, from my experience,
1: reflash using the original download files
2: make sure the battery is 60% and above
if that didnt fix it,
1: maybe theres something wrong with the recovery.img ( if im not mistaken )
if its me, i would just Root it ( unofficial way ) since youre stuck on bootloader ( theres guide somewhere in this XDA, search it),
then install custom roms.
or if you just wanna go back to Miui, then just reflash again using miflash
<--- noob, maybe some pro out there can help you out
good luck, dont get frustated :victory::victory:
i had the same problem as you.
check if you have a kenzo or a kate rom because they have exactly the same hardware (except kate has more bands).
try flashing 1 kenzo and 1 kate dev global miui rom (i suggest 6.9.29). first boot should be 5 or 10 minutes long
hi
so i have a Lenovo K8 plus 3 GB ram variant. Let me explain what happened first.
I unlocked my device's bootloader to flash the patched boot image for magisk root, then this orange state sign started showing up eerytime i booted up. then when the latest update rolled out in march, i decided to relock the bootloader and then update my device. did it and then a red state sign showing up accompanied by bootloop (it said something like rollback kernel too). so I formatted the whole thing via sp flash tool and downloaded the stock rom.
now when i try to flash it, preloader flashes FINE, recovery flashes FINE, but when it comes to md1img it shows this error: STATUS_INSUFFICIENT_BUFFER (0xC0010007). I tried flashing all the files individually to find the cause of the problem and see exactly which particular flash file was causing the problem. results are as follows.
[STATUS_INSUFFICIENT_BUFFER (0xC0010007) ]- this error was displayed while flashing these files - md1img, md1dsp, md1arm7, md3img.
[ STATUS_SEC_IMG_TOO_LARGE (0xC0020005)] - only popped up while flashing the oem image.
when I exclude these files from the queue, the rest files flash fine.
In short, I have a bricked phone which i am unable to flash via sp flash tool.
Thanks in advance
JDsingh007 said:
hi
so i have a Lenovo K8 plus 3 GB ram variant. Let me explain what happened first.
I unlocked my device's bootloader to flash the patched boot image for magisk root, then this orange state sign started showing up eerytime i booted up. then when the latest update rolled out in march, i decided to relock the bootloader and then update my device. did it and then a red state sign showing up accompanied by bootloop (it said something like rollback kernel too). so I formatted the whole thing via sp flash tool and downloaded the stock rom.
now when i try to flash it, preloader flashes FINE, recovery flashes FINE, but when it comes to md1img it shows this error: STATUS_INSUFFICIENT_BUFFER (0xC0010007). I tried flashing all the files individually to find the cause of the problem and see exactly which particular flash file was causing the problem. results are as follows.
[STATUS_INSUFFICIENT_BUFFER (0xC0010007) ]- this error was displayed while flashing these files - md1img, md1dsp, md1arm7, md3img.
[ STATUS_SEC_IMG_TOO_LARGE (0xC0020005)] - only popped up while flashing the oem image.
when I exclude these files from the queue, the rest files flash fine.
In short, I have a bricked phone which i am unable to flash via sp flash tool.
Thanks in advance
Click to expand...
Click to collapse
hey did you get it fixed and can you please send the link to the stock rom
yayjk said:
hey did you get it fixed and can you please send the link to the stock rom
Click to expand...
Click to collapse
TRY ASKING THE QUESTION ON THIS THREAD
https://forum.xda-developers.com/android/help/how-to-make-simple-android-apps-qna-t3776780
---------- Post added at 05:00 PM ---------- Previous post was at 05:00 PM ----------
JDsingh007 said:
hi
so i have a Lenovo K8 plus 3 GB ram variant. Let me explain what happened first.
I unlocked my device's bootloader to flash the patched boot image for magisk root, then this orange state sign started showing up eerytime i booted up. then when the latest update rolled out in march, i decided to relock the bootloader and then update my device. did it and then a red state sign showing up accompanied by bootloop (it said something like rollback kernel too). so I formatted the whole thing via sp flash tool and downloaded the stock rom.
now when i try to flash it, preloader flashes FINE, recovery flashes FINE, but when it comes to md1img it shows this error: STATUS_INSUFFICIENT_BUFFER (0xC0010007). I tried flashing all the files individually to find the cause of the problem and see exactly which particular flash file was causing the problem. results are as follows.
[STATUS_INSUFFICIENT_BUFFER (0xC0010007) ]- this error was displayed while flashing these files - md1img, md1dsp, md1arm7, md3img.
[ STATUS_SEC_IMG_TOO_LARGE (0xC0020005)] - only popped up while flashing the oem image.
when I exclude these files from the queue, the rest files flash fine.
In short, I have a bricked phone which i am unable to flash via sp flash tool.
Thanks in advance
Click to expand...
Click to collapse
TRY ASKING IN THIS THREAD
https://forum.xda-developers.com/android/help/how-to-make-simple-android-apps-qna-t3776780
How to Unbrick Lenovo K8 Plus 4GB
Hi All
I tried many stock roms and many versions of SP flash tool but none helped me to unbrick my lenovo k8 plus (4gb ram).
I was trying to downgrade it to Naugat from Oreo but it shows same error every time.
Error is (SP Flash tool version latest 5.18)
" Error_Status_Sec_Insufficient_Buffer( 0xC002004B)
[Hint]:
Verified boot is enabled.
Please download signed image (md1img-verified.img) or disable verified boot."
Plzzz help same problem
Enabled verified boot ...how to disabled
Same problem my lenovo k8plus
Enabled verified boot ...how to disabled
You need to use "Lenovo Moto Smart Assistant" instead of SPFlash tool to flash and you will be good to go. You can get the tool from the Lenovo official website.
JDsingh007 said:
hi
so i have a Lenovo K8 plus 3 GB ram variant. Let me explain what happened first.
I unlocked my device's bootloader to flash the patched boot image for magisk root, then this orange state sign started showing up eerytime i booted up. then when the latest update rolled out in march, i decided to relock the bootloader and then update my device. did it and then a red state sign showing up accompanied by bootloop (it said something like rollback kernel too). so I formatted the whole thing via sp flash tool and downloaded the stock rom.
now when i try to flash it, preloader flashes FINE, recovery flashes FINE, but when it comes to md1img it shows this error: STATUS_INSUFFICIENT_BUFFER (0xC0010007). I tried flashing all the files individually to find the cause of the problem and see exactly which particular flash file was causing the problem. results are as follows.
[STATUS_INSUFFICIENT_BUFFER (0xC0010007) ]- this error was displayed while flashing these files - md1img, md1dsp, md1arm7, md3img.
[ STATUS_SEC_IMG_TOO_LARGE (0xC0020005)] - only popped up while flashing the oem image.
when I exclude these files from the queue, the rest files flash fine.
In short, I have a bricked phone which i am unable to flash via sp flash tool.
Thanks in advance
Click to expand...
Click to collapse
Try with Lenovo Moto Smart Assistant. I too have bricked my phone... but I've successfully started my phone using this tool. you will get official signed ROM from here.
you can use LMSA tool to rescue,90% sucessfully ,don't use splashtool beacause it's many error if you choose wrong version
Had the same problem. Can confirm Lenovo's tool sucessfully recovers ohone from bricked state. A lifesaver!
Downloaded from https://lenovomobilesupport.lenovo.com/br/pt/downloads/ds101291-rescue-and-smart-assistant-lmsa
then updated to version 5.9.2.4 from inside the app itself
Hello guys,I tried to root my Honor 7A with no success and now I'm in a bootloop situation.
I first unlocked bootloader succesfully with dc-unlocker2client. Then I installed this TWRP version 0.4 with adb fastboot:
https://forum.xda-developers.com/p10-lite/development/recovery-twrp-3-2-1-0-t3783447
I couldn't get other TWRP to work.Finally in TWRP I tried to install Magicsk (several versions-18,17,16) but it came up with error 1.
I've dowloaded stock rom AUM-L29C185CUSTC185D1B140 from official site, extracted ABOOT.img, tried to flash it but no success,something wrong with partition, but I cant recall exactly.Then I accidentally did this: fastboot flash ramdisk ABOOT.img .Bootloop!!
I tried to flash extracted ramdisk,kernel,recovery_ramdisk again but still the same issue.I did 2 factory resets in stock recovery but the problem persists.
Please can anyone help?Is my phone wasted??
Anyone please?
michael976 said:
Anyone please?
Click to expand...
Click to collapse
I'm able to be in fastboot mode with adb.Someone to point to the right steps of flashing the stock rom to unbrick the phone please?Merry Christmas to all!
Problem solved!Admin can close the thread!
How did you solved this problem please can you tell me
How you solve it? I GOT SAME SITUATION NOW
Died thread? How u solve it?
Hello guys so today I want to teach you guys how to revert your software to stock Miui.
1. First of all, you need to download Mi Flash Tool ( https://www.xiaomiflash.com/download/ )
2. Then you need to download the fastboot for your device and unzip the file ( https://c.mi.com/oc/miuidownload/detail?guide=2 )
3. Put your phone into fastboot mode and plug it into your PC
4. Open Mi Flash Tool
5. Click "select" then navigate to your rom files that you have unzip
6. Choose either you want to clean and lock the bootloader or just clean and keep the bootloader. ( Clean and lock bootloader is recommended )
7. Click flash and wait until the flashing is done.
8. Now you're back in stock rom.
Update : If u want to rollback to 11.0.7 and have your bootloader unlocked u need to choose option clean all only
Hello.
This tutorial saved my phone. It was stuck on a black screen saying "Your system is destyroyed." I freaked out a lot. When I found this page, I was so happy. Thank you so much.
Best regards.
neo2006pf said:
Hello.
This tutorial saved my phone. It was stuck on a black screen saying "Your system is destyroyed." I freaked out a lot. When I found this page, I was so happy. Thank you so much.
Best regards.
Click to expand...
Click to collapse
Glad to know that my thread is useful to someone ?
miflash says it cannot find the log in the log folder. i put the miflash+tthe fastboot update in root folder.
doesnt work
I will answer my request: the above link shows the flash tool until 2018 version. it does not work. use the 2020 version from here !
That's for this very helpful thread. My device was bricked and I managed to recover it.
I had to change computers and install the Xiaomi drivers (prompted by u/drahtwurst's 2020 version linked previously). Turns out the machine I was using had corrupted drivers somehow.
What's the difference of doing this and flashing through recovery the MIUI ROM?
Worked perfectly, thanks heaps man! If anyone gets errors with the MiFlash tool, just create a new folder in the program's direcotery named LOG and it should fix it
Hi, please can anyone send a link for redmi note 9s stock recovery.
Hi,
Will this procedure, relock the bootloader?
Thanks
brabbit640 said:
Hi,
Will this procedure, relock the bootloader?
Thanks
Click to expand...
Click to collapse
If you select clean all and lock
Hi all,
i unlocked my curtana Device a few days ago and flashed xiaomi.eu, Havoc and RR ROMs. Because i like to geivew the Device to my father i flashed the original Rom to get everything back to Original.
I used the File curtana_global_images_V11.0.11.0.QJWMIXM_20200811.0000.00_10.0_global_38000bbd8b.tgz and flashed it via BatchFile, via Mi Flash and via XiaoMiTool V2 but all i got is a bootloop after flashing.
Do you have any idea? Do i miss something? After flashing the Xiaomi.eu ROM again, it boots up but i have still the annoying WLAN bug.
any help is welcome.
Thanks in advance
Could fix it with this hint.
https://forum.xda-developers.com/re.../to-recover-bootloop-return-to-stock-t4142799
System has been destroyed
Guys please help!
I tried to flash the stock rom but the flashing stopped with an error:
[14:15:00 c5461ce8]:error:Sending sparse 'super' 1/7 (784824 KB) FAILED (Error reading sparse file)
If i try to flash again it never stopps, waited 2 hours. Now my system is destroyed and I dont know how to recover it. :crying:
Ok, solved the problem at the end with this tool: Link
ShazlieyAzizan said:
Update : If u want to rollback to 11.0.7 and have your bootloader unlocked u need to choose option clean all only
Click to expand...
Click to collapse
bana yardımcı olurmusunuz cihaz hiç açılmıyor
---------- Post added at 11:24 PM ---------- Previous post was at 11:19 PM ----------
neo2006pf said:
Hello.
This tutorial saved my phone. It was stuck on a black screen saying "Your system is destyroyed." I freaked out a lot. When I found this page, I was so happy. Thank you so much.
Best regards.
Click to expand...
Click to collapse
note9 s brick oldu bana yardımcı olun açılmıyor siyah ekran
Can i downgrade to miui 11 from 12 using this method? My bootloader is locked. Indian version
oluwafunso97 said:
Hi, please can anyone send a link for redmi note 9s stock recovery.
Click to expand...
Click to collapse
Find inside Fastboot ROM
I just noticed the reply, sorry guys I gave my redmi note 9s to my mom so if you guys still got a problem with it you can try to refer from another thread or just quote this comment and I will try to answer it. Cheers!
I seem to have bricked my device using the MiFlash program, it had ''\$fastboot -s *lock'' in the box labeled checkpoint in the configuration settings, in the middle of the flashing process the device started to repeatedly reboot non stop, and if I hold down volume down it only flashes the fastboot screen for a moment before rebooting again, it seems there is nothing I can do since I cannot access fastboot mode or recovery mode. The device had twrp installed and I was trying to flash from the PixsysOS rom to MIUI v11.0.8.0 so that I could try out the Evolution X rom, I do not know what I did wrong, maybe I should have formatted data in twrp before trying to flash a new rom, or just flash the whole thing from twrp, or not flash the MIUI recovery at all. I hope someone can tell me what I did wrong .
Don't use 'flash and lock bootloader' . Just 'flash' .
Hey people, so I wanted to unbrick my phone by formating the data so I went all smarty pants and used SP Flash Tool and formated the whole flash except for the bootloader. Now I get an error message when I boot saying "Download not completed!" with the error code 0x99256658 after I flashed the whole stock rom (B.53). Did SP Flash Tool get rid of something extra? Or is the rom maybe missing something? Can anyone please help me unbrick it? That would be very nice. Thanks for reading
I found a solution. I need an oppo_custom.img for the realme 6. Can someone tell me where I can get it please?
EDIT: Nevermind I found it in the ROM files and I flashed it but I'm still getting the same error. Anyone any idea?
EDIT2: Somehow flashing OPPO F9's oppo_custom.img gets me to recovery but it doesn't load the OS