i had changed from dirty unicorns to miui8 via zcx twrp. It happened that sometimes that my phone was stuck in the boot process only. One day it didnt boot ... i waited for around 20 mins but it didnt boot.....so i decided to flash ressurection remix ......wen it came to entering security options(pin/password/pattern).....it showed "Unfortunately, Settings has stopped."
I had flashed RR via zcx twrp.
Any solutions??
I m unable to add fingerprint security to my phone.
plzz help!!
Related
ok, here is what happened. im running fulmics rom on lg g3 vs985w, i tried to encrypt my phone for some oddly stupid reason...
well it never got past 0% it sat for hours, so i booted to twrp and wiped everything and flashed fulmics rom
it goes through the whole installation process and when it reboots it goes to right back to the encryption unsuccessful screen
*************************PLEASE*************HELP***************
Hello Everyone,
I tried to install android Oreo AOSP rom in my Redmi note 3 SD from zcx recovery. Well, I've tried many times doing all the stuff like...formatting /data manually. The rom installs perfectly, the booting screen starts and then it ends up in a screen where it asks a password, Regardless of whatever I enter there I get the same message " Decryption Unsucsessfull- reset your phone". If I click in the reset phone button in the screen it takes me to the recovery, formats the phone and then ends up in the same error message screen. I urgently need a solution for this , Please help me!!!!!
https://forum.xda-developers.com/showpost.php?p=73621481&postcount=648
pumpkins12 said:
https://forum.xda-developers.com/showpost.php?p=73621481&postcount=648
Click to expand...
Click to collapse
Not Working !! Still getting the same message !!!
I think that you should flash a stock rom using mitool
I installed Nitrogen OS with Android 8.0 this solved my problems. I also installed the stock ROM and locked the phone before all these.
So, to begin with, yesterday Mi A1 got the Android 9 update. As I always do, I went to uptade it with Magisk (it worked with 8.0 to 8.1 and with every security patch, so I, as a newbie, thought, "why the h3ll not?"). Obviously, it didn't work and I got into a boot loop. So, here are the [lot] of things I have tried to do.
-Downloaded MiFlash and the latest OS version from Xiaomi site (8.1 witch november patch). Tried flashing a lot of times, I always get the boot loop after installing it. Wiped all data with TWRP and still didn't work. Always the same problem. Tried with different versions as well.
-Downloaded latest AOSP ROM for the device, flashed it, wiped cache and data, instaled TWRP (3.2.3-0), but the system never initiates. Doesn't even restart (20 minutes after my last try and it still is in a black screen).
-I've tried the same thing with Lineage 15.1 as well. Checked with MD5 in both roms. Doesn't work at all. Followed every tutorial I could, step by step, don't know what I'm doing wrong.
Can any one please help me? I don't know what to do anymore.
EDIT 1: So, I thought nothing happened, but after installing AOSP, I rebootet the phone holding the power buton, and during boot, I can see the "Powered by Android" from the custom ROM for a few seconds, but then the screed turns black and nothing more happens.
I am facing strange problem on my Redmi Note 4. Custom Roms are getting stuck after language selection screen on first boot. I had been using Resurrection Remix (Official) – Pie Rom on this phone earlier. Due to some reasons, I had to flash the stock MIUI rom. Thereafter, I flashed the latest TWRP 3.3.1 in fastboot mode and installed the latest build of Resurrection Remix (Official) – Pie (7 July 2019) via TWRP. The Rom installed successfully without facing any encryption problem because I had formatted my data partition prior to flashing Rom.
After flashing Rom, the System boots and Set Up Wizard initiates with the screen giving me option to select language. After I select language and press next…the phone goes to next screen ‘Just a Sec…’ and thereafter remains there forever. The screen blinks after some time and goes blank, then it comes back to ‘Just a Sec…’. It simply doesn’t let me go beyond that.
I tried two more builds of Resurrection Remix – Pie, but again the same story.
I tried to flash Pixel Experience (Official) – Pie, but the same story.
I believe, Set Up Wizard is stuck with some thing and doesn’t let me through. The Resurrection Remix (Official) – Pie (20 January 2019) build came to my rescue as this rom doesn’t initiate Set Up Wizard at first boot and simply goes to desktop. Thereafter, Set Up can be completed any time and doesn’t create any problem.
As 20 January 2019 build works fine, I tried to dirty flash the latest build over it with the hope that Set Up Wizard won’t come up. The dirty flash goes without error and phone boots to system. But this time, phone gets stuck while trying to get to desktop screen and message keeps showing forever on the screen ‘Phone is Starting’. I can see the desktop image in the background. The screen goes blank in between and then message keeps showing again. It simply doesn’t let me pass through. In this scenario, I can access the pulldown and go to settings. I did check, phone wasn’t encrypted because I had not used any pin, fingerprint etc. on the working rom prior to dirty flash of latest build.
Can anyone help me as I simply cannot install any Custom Rom due to this problem. I have been left with only two options, either to stick with 20 January 2019 build of Resurrection Remix, which doesn’t initiate Set Up Wizard at first boot or to bloatware loaded MIUI stock rom.
What I tried :
1. Tried to rename the SetupWizard.apk file to SetupWizard.apk.bak in TWRP to evade first time Set Up Wizard but in this case, screen doesn’t show any thing and goes blank at the time just before going to desktop. It didn’t work.
2. I tried TWRP backup of another Redmi Note 4 having latest build and restored backup of four partitions of that phone (vendor, boot, system and data) on my trouble creating phone. The system booted but it also got stuck at ‘Phone is Starting’ Screen while showing me desktop in the background. I could enter the settings through quick pulldown in this scenario.
Please help me resolve this problem.
I have obtained catlog files through adb while my phone was booting after dirty flashing latest RR build (August 2019). Please note that I can't go beyond Just a Second screen, in case I go for clean flash after data format. Therefore, I flashed RR January build first, which works without any problem. Then settled my phone and thereafter updated it with latest RR (August 2019) build by dirty flashing. Phone accepted my pin on startup screen and then went ahead with showing 'Phone is Starting'. The phone never passed through that screen.
I have obtained two files, one with Error option and other is complete log. Please help me understand the problem, so that I may update my phone with latest RR build, else I may remain stuck with January build only.
https://drive.google.com/open?id=1zVXYxdQ5epImYTOiXSs1tIFB8uTwNV2p (Complete Log File)
https://drive.google.com/open?id=1YYXbdq7csCwskCtgtn2uWYG4rXWng4em (Log File with Error Tag only)
I kept trying Rom after Rom and finally, the AOSiP Official Rom is working great on my phone. Every thing went smooth with this Rom.
Moderator, please close this thread.
Thread closed at Op's Request.
Thanks
SacredDeviL666.
I flashed a Redmi 5 plus with lineage 17 successfully then i rooted it. I wanted to install Revolut and other banking apps but they don't work with root so tried to unroot but was not possible as it got corrupted so reflashed it back to stock rom android 8.1 and worked fine.
I tried again to flash Lineage 17, 16 and also Paranoid Android but each time I boot put the screen turns off. The boot seems to start up but the screen is off.
I reflashed it back to stock rom and it gave me an error on startup saying "Find Device Storage Corrupted, Your Device is Unsafe Now" and keeps rebooting.
Any clues?
berex said:
I flashed a Redmi 5 plus with lineage 17 successfully then i rooted it. I wanted to install Revolut and other banking apps but they don't work with root so tried to unroot but was not possible as it got corrupted so reflashed it back to stock rom android 8.1 and worked fine.
I tried again to flash Lineage 17, 16 and also Paranoid Android but each time I boot put the screen turns off. The boot seems to start up but the screen is off.
I reflashed it back to stock rom and it gave me an error on startup saying "Find Device Storage Corrupted, Your Device is Unsafe Now" and keeps rebooting.
Any clues?
Click to expand...
Click to collapse
Have the same problem with my 5 plus, just keeps rebooting, also when the charger is not plugged it just shutdown before booting to bootanimation. Do you already solve yours? Can you help me?