I've recently gotten my kate device, I've unlocked the phone via the chinese developer's fastboot rom. I've previously opened my backplate to unplug the battery pins (for booting into edl mode).
I'm able to flash to cm13, however, no matter what cm13 firmware or kate nx radios I flashed. I can't seem to get cellular data on the device, keeps saying that it's unable to search for network operator.
I checked and found out that the device does not have a modem partition. Could anyone help me get data on my Kate device crying:
Try yourself to do so:
1. Keep your Kate NX Radios file
2.Try to get the most updated international version of Kate MIUI8 ROM and then download it
3.Use WinRar to open NX Radios and MIUI8 ROM.
4.Pull files one by one from folder of "firmware-update" in Kate MIUI8 ROM and replace files one by one in NX Radios file
5.After finishing it, save new NX Radios file as another new name.
6.Enter TWRP and flashing the new NX Raios file you make.
Good luck !
scarletgod said:
I checked and found out that the device does not have a modem partition. Could anyone help me get data on my Kate device crying:
Click to expand...
Click to collapse
pls try
- flash kate firmware using twrp...if still can't help then try below
- flash fastboot room using miflash via edl...hope miflash able to create those modem partition.
abihary said:
pls try
- flash kate firmware using twrp...if still can't help then try below
- flash fastboot room using miflash via edl...hope miflash able to create those modem partition.
Click to expand...
Click to collapse
I've tried that, however there is no modem partition. The thing is that data works when I flash it to the chinese developer's rom
scarletgod said:
I've tried that, however there is no modem partition. The thing is that data works when I flash it to the chinese developer's rom
Click to expand...
Click to collapse
so, already flash chn dev rom using miflash? i guess your modem patition already repaired by flashing those chn dev rom?
then you can create by yourself miui chn dev firmware into a flashable zip for future usage, if you didn't want use that rom. the way as mentioned above by kris chen.
Kris Chen said:
Try yourself to do so:
1. Keep your Kate NX Radios file
2.Try to get the most updated international version of Kate MIUI8 ROM and then download it
3.Use WinRar to open NX Radios and MIUI8 ROM.
4.Pull files one by one from folder of "firmware-update" in Kate MIUI8 ROM and replace files one by one in NX Radios file
5.After finishing it, save new NX Radios file as another new name.
6.Enter TWRP and flashing the new NX Raios file you make.
Good luck !
Click to expand...
Click to collapse
abihary said:
so, already flash chn dev rom using miflash? i guess your modem patition already repaired by flashing those chn dev rom?
then you can create by yourself miui chn dev firmware into a flashable zip for future usage, if you didn't want use that rom. the way as mentioned above by kris chen.
Click to expand...
Click to collapse
Thank you both! I'll go try this out
Kris Chen said:
Try yourself to do so:
1. Keep your Kate NX Radios file
2.Try to get the most updated international version of Kate MIUI8 ROM and then download it
3.Use WinRar to open NX Radios and MIUI8 ROM.
4.Pull files one by one from folder of "firmware-update" in Kate MIUI8 ROM and replace files one by one in NX Radios file
5.After finishing it, save new NX Radios file as another new name.
6.Enter TWRP and flashing the new NX Raios file you make.
Good luck !
Click to expand...
Click to collapse
Hi sir!
Do you happen to know which files I should pull over? I tried pulling all of them over but I have errors even detecting the sim card now
Just only need to pull files under directory of "firmware-update" from mostly updated MIUI8 ROM.
Check attachment.
scarletgod said:
Hi sir!
Do you happen to know which files I should pull over? I tried pulling all of them over but I have errors even detecting the sim card now
Click to expand...
Click to collapse
Related
I need the stock radio for Kenzo. I flashed some radio firmware and it's buggy. I couldn't find the stock firmware, so I've tried flashing the Katr radio, and the cm13 radio. While they all work, they're buggy.
So, my question. Is there anywhere I can download the stock radio firmware for Kenzo?
Did you mean miui firmware?
If yes, then you can download below
miui 6.10.13 MM
miui 7.3.2.0 LP
No, I mean the radio. I saw the stock miui firmware, but after flashing I found that they don't restore the radio as there is no signal and no calls can be made.
which miui version installed in your phone?
If you need non-hlos.bin file only, then you can delete others file in folder firmware update using winrar or 7z file manager and lets the app do the rest.
download latest fastboot rom for kenzo (maybe you already have). search Non HLOS.bin inside that fasboot rom. exctract.. you can flash in fastboot mode or if you have cm13 firmware.. change Non HLOS.bin from CM13firmware with Non HLOS from kenzo fastboot rom..(so its flashable)
Which partition do I flash that to with fastboot?
I'm trying to keep the ROM I have installed, and just fix the signal issues. Is the non-hlos.bin file all I need for that?
Also, I don't have miui, I have the Nexus Experience ROM that came with a radios.zip for flashing, which doesn't work on my device. So that's why I'm looking for the stock firmware.
Weird...those nx radios file should be able to help your signal problem due to i also ever used nx rom. NX radios work as expected for me.
Anyway, you can try below step to solve it
1. Flash cm13 radio files, and see if this help. If still not help then you can try next one
2. Flash cm14 firmware from thestrix. I already used this firmware at aicp 11 when i downgrade from N rom. so far no issue about signal or deep sleep. Everything work as expected.
Anyway, for modem files...yes, it provided at non-hlos.bin file
I've tried the cm13 radio files already, and almost every other radio I could find. I saw a cm13 firmware.zip which I didn't want to flash before I found a way to revert to stock. I'll try that once I can and that cm14.zip. Thanks.
I have a question for you
For what stok radio frimware? Can you tell me
Non HLOS.bin and adspso.bin or follow this method http://forum.xda-developers.com/redmi-note-3/help/to-solve-dual-sim-problem-custom-roms-t3490279
Oh, I've just noticed that those files you sent are flashable firmware zips. I thought you sent me the full 1GB stock ROMs. I'll try these and see if it works.
did you already try to flash it? it's worked? how about your bootloader, relocked?
So what did you flash at the end?
I am very confused on how to root RN3 (SD 650).
I need rooting for
- Titanium backup
- Adblock
There are multiple terms and multiple posts. Can any one guide.
What is Kenzo, Kate .... ?
What is global dev/chinese rom?
What I have learnt so far
Step 1 - I need to unlock bootloader. But how ??
Official method - Does it require flashing a new rom? Will I loose data?
Unofficial - Is there any safe method?
Step 2 - Flash recovery
Cofface and ZCX are stable TWRPs. Which one to use.
i unlocked on global stable (so no data loss) no need of dev ROM ( it depends on luck)
try logging in on miunlock tool and micloud with mobile no (as username)only. If it fails try tommorow. repetition can do no good.
I unlocked on stable rom on my first attempt of the day.
my last attempt was weeks ago (primarily because i thought it was a lost cause)
thread http://en.miui.com/thread-280561-1-1.html
zcx for backing up ROMs ,
while updating through zcx to 6.11.24 many had bootloop(easily fixed by miunlock again).
so i updated through cofface no big problem ( the only problem i had was the system launcher was not loading fixed when i installed xposed again) always take backup before updating
first thing first. apply for bootloader unlocking. thn unlock it through mi unlock tool. if u are new to these things thn dont try unofficial methods.
hope this helps.
hyperorb said:
I am very confused on how to root RN3 (SD 650).
I need rooting for
- Titanium backup
- Adblock
There are multiple terms and multiple posts. Can any one guide.
What is Kenzo, Kate .... ?
What is global dev/chinese rom?
What I have learnt so far
Step 1 - I need to unlock bootloader. But how ??
Official method - Does it require flashing a new rom? Will I loose data?
Unofficial - Is there any safe method?
Step 2 - Flash recovery
Cofface and ZCX are stable TWRPs. Which one to use.
Click to expand...
Click to collapse
Welcome to Redmi Note 3 family.
Kenzo or Kate?
Snapdragon standard variant is called as a 'kenzo' and special edition Redmi note 3 with different radios version is called as a 'kate'.
Global/ Chinese?
There are two types of MIUI ROMs.
1. Global
2. Chinese
Difference in these both ROMs is that, you will find some chinese material here and there in chinese ROM. Global is fully in english.
Again there are two subtypes of these two ROMs which are Stable and Dev/Beta. Sometimes Beta/Dev ROM is also called as a 'weekly'.
So basically most of the devices have 4 official MIUI ROMs which are:
1. Global Stable
2. Global Beta or Global Dev
3. Chinese Stable
4. Chinese Beta or Dev
There is no connection between the type of ROM and unlocking bootloader.
Bootloader unlock method?
Since you know there are two methods to unlock the bootloader, I will discuss them one by one.
1. Official
You don't require to flash any latest or dev or chinese ROM to unlock using official method.
First of all you need a persmission from Xiaomi to unlock the bootloader.
Goto http://en.miui.com/unlock/
Login here. The account should be same as the one is on your phone.
Write the reasons for unlocking.
After that Xiaomi will grant you the permission. If you don't receive any SMS from Xiaomi, just check on the above link.
Even if you get the permission its most likely you will not able to unlock nootloader on first attepmt. But don't worry, try again after few days.
Use MiUnlock tool. Once you get the permision, that tool will be available on the above link or you can always download from here http://en.miui.com/unlock/download_en.html
2. Unofficial
I have unlocked my phone by unofficial method 6-7 months ago and I still have no issues at all.
Open this folder https://mega.nz/#F!LUxlHJBC!RK5_8fta4XWAVFqWoWrvjQ
It has everything what you need for unlocking bootloader unofficially.
Just follow this guide and you are good to go: GUIDE
You might have to disable Driver Signature Verification if you are using Windows 8 or higher (google it)
Recovery?
I will suggest you only and only following recoveries:
If you have unlocked your bootloader officially, You must use ZCX only.
If you have unlocked your bootloader unofficially, you must use either Alka or Cofface
Here is a thread where you will find everything about recoveries.
http://forum.xda-developers.com/redmi-note-3/how-to/guide-redmi-note-3-available-twrps-t3406708
All download links are in that thread.
Hope this will help! Happy flashing! :fingers-crossed: :highfive:
skad00sh said:
Hope this will help!
Click to expand...
Click to collapse
What are you saying !!! .. This is more than what I could have asked for to start. :good: Many thanks for taking time to compile the information.
One more noob query. I have RN3 3GB 32GB version. Is it special edition or normal?
I am planning to flash unofficially - Recovery - Alka
One question - In your mega folder Kenzounlock.zip was uploaded in Sept. Can I use the "Redmi Note 3 Qualcomm Latest Global Stable Version Fastboot File Download" from http://en.miui.com/a-234.html as replacement.
Many thanks for your help.
hyperorb said:
What are you saying !!! .. This is more than what I could have asked for to start. :good: Many thanks for taking time to compile the information.
One more noob query. I have RN3 3GB 32GB version. Is it special edition or normal?
I am planning to flash unofficially - Recovery - Alka
One question - In your mega folder Kenzounlock.zip was uploaded in Sept. Can I use the "Redmi Note 3 Qualcomm Latest Global Stable Version Fastboot File Download" from http://en.miui.com/a-234.html as replacement.
Many thanks for your help.
Click to expand...
Click to collapse
I have same device. No problrm at all.
'kenzounlock.zip' should be flashed. Only that zip grants you ability to unlock bootloader. Don't flash any other zip.
Don't foget to activate 'OEM Unlocking' from Developer Options
To unlock Developer Options, tap on 'MIUI Version' 7 times.
Developer Options is situated at Settings>Additional Settings.
@skad00sh Unfortunately I moved forward with latest global stable zip.
- Unzip global stable Kenzo zip
- Found the unocked emmc_appsboot.mbn from the forum
- Replaced the file in /images folder
- Miflash (Beta version gave length less than zero error) therefore used MiFlash 20160401
- Flashed rom
- Fastboot mode
- Unlocked boot loader -> Auto reboot
- Had to force fastboot
- Oem device-info tells bootloader unlocked
- Reboot
- Red light blinking while charging
- Rom booted successfully.
Not sure why red light is blinking while charging
Edit :
I was able to use another emmc_appsboot.mbn from http://forum.xda-developers.com/red...nlock-twrp-t3494833/post69484805#post69484805.
Reflashed with replaced file. Now no more blinking red light.
Cofface TWRP from below link worked. Alka did not work.
http://forum.xda-developers.com/redmi-note-3/how-to/tutorial-miui-8-0-1-0-global-stable-t3449039
Rebooting now... Fingers crossed ..
hyperorb said:
@skad00sh Unfortunately I moved forward with latest global stable zip.
- Unzip global stable Kenzo zip
- Found the unocked emmc_appsboot.mbn from the forum
- Replaced the file in /images folder
- Miflash (Beta version gave length less than zero error) therefore used MiFlash 20160401
- Flashed rom
- Fastboot mode
- Unlocked boot loader -> Auto reboot
- Had to force fastboot
- Oem device-info tells bootloader unlocked
- Reboot
- Red light blinking while charging
- Rom booted successfully.
Not sure why red light is blinking while charging
Click to expand...
Click to collapse
So far you have done great!
Congrats!!
Red Light Blinking is common issue on unofficially unlocked bootloader devices.
Its just a firmware issue which can be fixed by flashing proper firmware.
Flash ROM from xiaomi.eu. Those ROMs are very clean and works perfectly with titanium backup. The issue with official MIUI ROM is that every time to try to restore a app from titanium backup, it asks for your permision. It is so annoying. Xiaomi.eu provides clean ROMs. These ROMs are unlocked bootloader friendly. These will not relock your bootloader.
Link for the ROM.
I recommend you to flash this ROM. Updated on 1st December.
In case you want to use current ROM without changing anything, you can flash following MIUI firmware from recovery... and you will be done with that red light thingy!
MIUI Firmware Link
I wonder why you still want to use MIUI when you can taste Nougat 7.1 easily!
In case if you want to use nougat, I will recommend you to use CyanogenMod 14.1, Ressurection Remix, AICP (I felt these ROMs are highly stable than other)
skad00sh said:
So far you have done great!
Congrats!!
Red Light Blinking is common issue on unofficially unlocked bootloader devices.
Its just a firmware issue which can be fixed by flashing proper firmware.
Flash ROM from xiaomi.eu. Those ROMs are very clean and works perfectly with titanium backup. The issue with official MIUI ROM is that every time to try to restore a app from titanium backup, it asks for your permision. It is so annoying. Xiaomi.eu provides clean ROMs. These ROMs are unlocked bootloader friendly. These will not relock your bootloader.
Link for the ROM.
I recommend you to flash this ROM. Updated on 1st December.
In case you want to use current ROM without changing anything, you can flash following MIUI firmware from recovery... and you will be done with that red light thingy!
MIUI Firmware Link
I wonder why you still want to use MIUI when you can taste Nougat 7.1 easily!
In case if you want to use nougat, I will recommend you to use CyanogenMod 14.1, Ressurection Remix, AICP (I felt these ROMs are highly stable than other)
Click to expand...
Click to collapse
Red light issue - [refer to edit in my previous reply. ]It is fixed. I had to use a different bootloader file. It worked with latest global stable.
Recovery I was unable to use Alka recovery (refer to your mega folder) . Had to install Cofface (refer to my previous reply).
EU Roms - My bad. I was not aware of those. Sigh !! so much effort I put. You are right TiBU asks about every single app restore. Besides for some app .. it hanged. I had to force reboot. Can I install these rom using TWRP Cofface recovery??
Nougat - This is my SO's fone. I need a stable daily driver for her. This is a day old phone. May be after sometime I will try 7.1
Honestly, I was very scared with RN3. It was my most confusing rooting. Compared to Moto Defy > Galaxy S3 > OP3 .. which were all very easy to manipulate.. But RN3 ..
Your initial post really paved way for me to move forward. Sincere thanks to you and others who helped me with my queries.
One thing is surprising that Cofface TWRP does not show EFS backup option
Wasn't the MTK variant called hennesy? and the rmn3 pro(sd650) with extra cellular bands called the kate.
Ivanlai said:
Wasn't the MTK variant called hennesy? and the rmn3 pro(sd650) with extra cellular bands called the kate.
Click to expand...
Click to collapse
There are 3 variants in the Redmi Note 3 series
RN3MTK code named "Hennessy" - with Mediatek SoC
RN3SD code named "Kenzo" - (with Qualcomm/SoC is Snapdragon 650), also called "Pro"
RN3SD Special Edition, code named "Kate" - "International version"also called "Special Edition" (Kate variant) of "pro", includes 800 base band (4g in somes isolated areas) and hardware is 2mm higher than kenzo.
Edit: Oops @Ivanlai You wrote the same thing. Looks like I still have lots of confusion . :silly:
Ivanlai said:
Wasn't the MTK variant called hennesy? and the rmn3 pro(sd650) with extra cellular bands called the kate.
Click to expand...
Click to collapse
Oh yeah! I forgot! My bad! MTK version is called as a Hennessy.
Rename that Alka recovery file to 'recovery.img' then copy it to your Minimal ADB and Fastboot folder.
After that open command prompt in that folder and enter following command
Code:
fastboot flash recovery recovery.img
Then alka will be installed.
You can flash EU roms directly from any recovery.
@skad00sh
1) Should I update recovery from Cofface to Alka ? If yes, how fastboot flash or TWRP install?
2) Before installing EU rom, do I need to replace the bootloader file emmc_appsboot.mbn
hyperorb said:
One thing is surprising that Cofface TWRP does not show EFS backup option
Click to expand...
Click to collapse
yes it is. use zcx or alka for backup
edit
if you want to flash another recovery image n ur phone is rooted thn use flashify app to flash any recovery img through your phone
Flash ROM from [URL="https://xiaomi.eu/community/threads/6-12-1.36462/" said:
xiaomi.eu[/URL]. Those ROMs are very clean and works perfectly with titanium backup. Xiaomi.eu provides clean ROMs. These ROMs are unlocked bootloader friendly. These will not relock your bootloader.
Link for the ROM.
I recommend you to flash this ROM. Updated on 1st December.
Click to expand...
Click to collapse
Do i have to replace the emmc_appsboot.mbn from xiaomi.eu ROM or just flash using Cofface TWRP?
Guys..i have redmi note 3 sd 650 miui 8.0.6...how should i install recovery..i wan to try cm roms??so many confusion regarding which is the right recovery to flash on my device...
hyperorb said:
@skad00sh
1) Should I update recovery from Cofface to Alka ? If yes, how fastboot flash or TWRP install?
2) Before installing EU rom, do I need to replace the bootloader file emmc_appsboot.mbn
Click to expand...
Click to collapse
1. Yes use Alka. It has all backup options. You will filnd EFS and other backup options in it. Since you have unlocked officially, use Alka only. An you can install it directly through TWRP install. No issues.
2. No need to replace emmc_appsboot.mbn for EU ROMs. They are specially made for unlocked bootloader devices only. So you can directly flash EU ROMs without any worry.
$lim $hady said:
Do i have to replace the emmc_appsboot.mbn from xiaomi.eu ROM or just flash using Cofface TWRP?
Click to expand...
Click to collapse
No need to replace emmc_appsboot.mbn for EU ROMs. They are specially made for unlocked bootloader devices only. So you can directly flash EU ROMs without any worry.
kitbor said:
Guys..i have redmi note 3 sd 650 miui 8.0.6...how should i install recovery..i wan to try cm roms??so many confusion regarding which is the right recovery to flash on my device...
Click to expand...
Click to collapse
Checkout 4th post of mine in this thread or click below:
http://forum.xda-developers.com/showpost.php?p=69920880&postcount=4
skad00sh said:
1. Yes use Alka. It has all backup options. You will filnd EFS and other backup options in it. Since you have unlocked officially, use Alka only. An you can install it directly through TWRP install. No issues.
Click to expand...
Click to collapse
Ok. Will install Alka.
By the way, I have unlocked unofficially. Hope that is ok.
skad00sh said:
No need to replace emmc_appsboot.mbn for EU ROMs. They are specially made for unlocked bootloader devices only. So you can directly flash EU ROMs without any worry.
Click to expand...
Click to collapse
Thank you.. I flashed the latest 6.12.1 while waiting for the reply got stuck in mi account log in screen.. Clean flashed 6.11.3 and then dirty flashed 6.12.1 and lazy flasher.. Works perfect.. Using Cofface TWRP
My Poco sensors stoped working while o was flashing some ROM I don't remember but it was maybe an sGSI.
After flashing alot of vendors on miui or pixel e, iam still facing the same issue.
Any help would really be appreciated
Stock with miflash.....and always backup...lesson learned
seems like persist.img is corrupted!
if you have fastboot rom (miui10.3.7 (2.7gb) , extract it, and further extract it, i will come something 8 gb in total!
inside images folder there will be persist.img
flash that img file, in TWRP /persist PARTITION (BE CARE FUL !!!!!!!!!!!!!!!!)
or better use ORANGE FOX RECOVERY to flash PERSIST.img
then reboot device and check!
if it still doesnt work then use miflasher, and flash this FASTBOOT rom from image folder!
REMEMBER!!!!!!!! don't tick the box, "FLASH ALL AND LOCK" this will relock your bootloader! , simply select "FLASH ALL" button in miFLASHER (down-right)
YasuHamed said:
seems like persist.img is corrupted!
if you have fastboot rom (miui10.3.7 (2.7gb) , extract it, and further extract it, i will come something 8 gb in total!
inside images folder there will be persist.img
flash that img file, in TWRP /persist PARTITION (BE CARE FUL !!!!!!!!!!!!!!!!)
or better use ORANGE FOX RECOVERY to flash PERSIST.img
then reboot device and check!
if it still doesnt work then use miflasher, and flash this FASTBOOT rom from image folder!
REMEMBER!!!!!!!! don't tick the box, "FLASH ALL AND LOCK" this will relock your bootloader! , simply select "FLASH ALL" button in miFLASHER (down-right)
Click to expand...
Click to collapse
mi flash failed to do the job and came out with error. booted fine but sensors still broken.
twrp and orange fox have no persist.img chose when flashing.
anyways thx 4 help. i hope i can get out outta this:crying::crying:
iam using miui 9.6.18 bcz i want oreo
lokixd4x4 said:
mi flash failed to do the job and came out with error. booted fine but sensors still broken.
twrp and orange fox have no persist.img chose when flashing.
anyways thx 4 help. i hope i can get out outta this:crying::crying:
iam using miui 9.6.18 bcz i want oreo
Click to expand...
Click to collapse
according to this video https://youtu.be/JKShaUdpvQw?t=374 its platform file issue,
download latest version from
https://forum.xda-developers.com/android/software/tool-platform-tools-adb-fasbootdrivers-t3061441
extract platform folder, put FASTBOOT FILES of MIUI rom in Platform folder and then try flashing
also
put everything in root C:/ and only one folder "C:\images"
long paths are not recomended for MIflasher!
@YasuHamed bro I am facing the exact same issue with a window popup on screen says find device is corrupted your device is unsafe now. Did you find a solution . Please help .brother.
abhisheksh9999 said:
@YasuHamed bro I am facing the exact same issue with a window popup on screen says find device is corrupted your device is unsafe now. Did you find a solution . Please help .brother.
Click to expand...
Click to collapse
i gave up and started using custom roms! they are closer to Stock android and have amazing customizations!
Evolution / Havoc / AeX on android 10 is amazing!
Reloaded OS (android10) is CAF based rom and its faster than others but have no customizations!
CR droid has maximum customizations but its little laggy!
you may also use
Masik13.3 and XiaomiEu roms which are Modified MIUI versions! ( google MIUI ROM BUILDER) and you can predefine features!
these roms can them be flashed via Twrp!
lokixd4x4 said:
mi flash failed to do the job and came out with error. booted fine but sensors still broken.
twrp and orange fox have no persist.img chose when flashing.
anyways thx 4 help. i hope i can get out outta this:crying::crying:
iam using miui 9.6.18 bcz i want oreo
Click to expand...
Click to collapse
Did you find any way to fix the sensors?
I think i too made the same mistake some two months back after flashed peplus rom.. i noticed it only recently.
I lost persist.img data in the system, I really need your help, I can't find the persist.img file in fastboot, sorry for bad english
my devices redmi note 10 sunny
Did you mean that You deleted "presists.img" file from Fastboot rom folder ?
besides what's MIUI Fastboot file so I can share it to you here.
Abdullah.Csit said:
Did you mean that You deleted "presists.img" file from Fastboot rom folder ?
besides what's MIUI Fastboot file so I can share it to you here.
Click to expand...
Click to collapse
i found all the fastboot roms that don't have persist.img file, currently the sensor device and network connection are not working
thienthantoiloi1995 said:
i found all the fastboot roms that don't have persist.img file, currently the sensor device and network connection are not working
Click to expand...
Click to collapse
Just download Fastboot rom from here:
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Abdullah.Csit said:
you must download Miui stock rom "Fastboot type not recovery type"
Then use Mi flash Tool latest to flash fastboot rom.
1. Download this rom "Fastboot 4.7 GB" from here :
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
2. Download Mi flash Tool:
https://www.xiaomiflash.com/downloads/MiFlash20181115.zip
Unzip password: xiaomiflash.com
3. Extract fastboot rom file .tgz to "C" disk then extract one more time the .zip file in same location "C://" then you get folder with rom build number and name.
4. Open Mi flash Tool , select Rom folder that we had extracted it.
5. Boot to fastboot mode & Connect your device.
6. Hit refresh so you will find your device name.
7. Check erase all data box without lock!
8. Click flash and wait till your device boot to MIUI.
Click to expand...
Click to collapse
Abdullah.Csit said:
Just download Fastboot rom from here:
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Click to expand...
Click to collapse
I ran the program again and it still doesn't work
thienthantoiloi1995 said:
I ran the program again and it still doesn't work
Click to expand...
Click to collapse
Did you Downloaded the Fastboot rom from the site that I mentioned ?
Abdullah.Csit said:
Did you Downloaded the Fastboot rom from the site that I mentioned ?
Click to expand...
Click to collapse
yes
thienthantoiloi1995 said:
yes
Click to expand...
Click to collapse
That's weird!
Last solution just flash TWRP then format internal storage then reboot to Fastboot mode and reflash Fastboot rom (same instructions on my reply up here)
Abdullah.Csit said:
That's weird!
Last solution just flash TWRP then format internal storage then reboot to Fastboot mode and reflash Fastboot rom (same instructions on my reply up here)
Click to expand...
Click to collapse
it still not working, can you extract persist.img file from your device send it to me.
Just 1 file persist.img can save my device then thank you
thienthantoiloi1995 said:
it still not working, can you extract persist.img file from your device send it to me.
Just 1 file persist.img can save my device then thank you
Click to expand...
Click to collapse
Download this presist.img file:
persist.img
drive.google.com
Method #1:
flash it with adb cmd:
Code:
fastboot flash persist persist.img
Method #2:
If not success use this way, Thanks @MPK99 :
a way from twrp terminal
Store it on pc & do:
su
adb shell dd if=/location/to/persist.img of=/dev/block/platform/soc/1d84000.ufshc/by-name/persist
Click to expand...
Click to collapse
For now are you still just trying to fill in the missing file, or have you already re-flashed the Miui ROM using MiFlash?
EDIT:
Transferring persist.img from the other phone is not a good idea. Read here (used for Xiaomi Mi A1).
StaryMuz said:
For now are you still just trying to fill in the missing file, or have you already re-flashed the Miui ROM using MiFlash?
EDIT:
Transferring persist.img from the other phone is not a good idea. Read here (used for Xiaomi Mi A1).
Click to expand...
Click to collapse
It's true. Messing with persist data is never a good idea. As who someone lost their persist in anyway, has no other chance to resurrect the same state, they have no other choice.
Stock ROM Miui no longer contains persist.img in its standalone form. In which file is it now included?
Won't copying also change the IMEI?
MPK99 said:
It's true. Messing with persist data is never a good idea. As who someone lost their persist in anyway, has no other chance to resurrect the same state, they have no other choice.
Click to expand...
Click to collapse
I'm still wondering, wouldn't the file be created when locking the bootloader (flash_all_lock)?
StaryMuz said:
I'm still wondering, wouldn't the file be created when locking the bootloader (flash_all_lock)?
Click to expand...
Click to collapse
Maybe. I'm not so sure bout that.
StaryMuz said:
Stock ROM Miui no longer contains persist.img in its standalone form. In which file is it now included?
Won't copying also change the IMEI?
Click to expand...
Click to collapse
Maybe, but what we can do ! it's the only way let he flash the backuped persist file and let see what he can lose if he has no other way!
For your information I already checked all fastboot MIUI roms for mojito none of it's include presist.img Then I checked my second device (Sweet redmi note 10 pro) fastboot folder Then I located the presist.img file! so I think flashing presist.img will work.
let him go online and figure out if it will work
Abdullah.Csit said:
Download this presist.img file:
persist.img
drive.google.com
Method #1:
flash it with adb cmd:
Code:
fastboot flash persist persist.img
Method #2:
If not success use this way, Thanks @MPK99 :
Click to expand...
Click to collapse
Thank you so much, I'm really happy
StaryMuz said:
For now are you still just trying to fill in the missing file, or have you already re-flashed the Miui ROM using MiFlash?
EDIT:
Transferring persist.img from the other phone is not a good idea. Read here (used for Xiaomi Mi A1).
Click to expand...
Click to collapse
MPK99 said:
Maybe. I'm not so sure bout that.
Click to expand...
Click to collapse
my device is back to normal, thank you for everyone's interest in solving my device problems
thienthantoiloi1995 said:
Thank you so much, I'm really happy
Click to expand...
Click to collapse
Glad that is your problem solved , Just to confirm did you follow method #1 ?
Regards
Abdullah.Csit said:
Glad that is your problem solved , Just to confirm did you follow method #1 ?
Regards
Click to expand...
Click to collapse
I used the file you sent by loading it directly by TWRP , the cmd command didn't work
Hi,
I search Xiaomi MIUI EU Custom ROM to flash with twrp.
Is this the right file for doing it:
xiaomi.eu_multi_HMNote10_V13.0.11.0.SKGMIXM_v13-12.zip2022-12-133.4 GB
or this file: xiaomi.eu_multi_HMNote10_V13.0.10.0.SKGMIXM_v13-12.zip
Thanks
nierewa said:
Hi,
I search Xiaomi MIUI EU Custom ROM to flash with twrp.
Is this the right file for doing it:
xiaomi.eu_multi_HMNote10_V13.0.11.0.SKGMIXM_v13-12.zip2022-12-133.4 GB
or this file: xiaomi.eu_multi_HMNote10_V13.0.10.0.SKGMIXM_v13-12.zip
Thanks
Click to expand...
Click to collapse
Check the version of your phone:M2101K7AG, M2101K7AI
It seems that the code name of your device is MOJITO, Xiaomi EU rom does not provide a rom for this version.
The roms you post are stock roms.
The roms you post are stock roms
Click to expand...
Click to collapse
That means it does'nt work with twrp?
nierewa said:
That means it does'nt work with twrp?
Click to expand...
Click to collapse
Is there already a TWRp for this model?
And the TWRP uses recovery roms which contain only enough to start the phone or update, unlike the Fastboot rom which contains all the IMGs.
Use this tool to change rom version (the data will be erased).
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
Is there already a TWRp for this model?
Click to expand...
Click to collapse
Yes.
Use this tool to change rom version (the data will be erased).
Click to expand...
Click to collapse
I wan't to use not the official stcok rom.
I have read somewhere that Xiaomi MIUI EU Custom ROM made some customizations.
In meantime I found this thread
So I asked my question there
nierewa said:
Yes.
I wan't to use not the official stcok rom.
I have read somewhere that Xiaomi MIUI EU Custom ROM made some customizations.
In meantime I found this thread
So I asked my question there
Click to expand...
Click to collapse
Exact, I looked for the MOJITO and apparently the SUNNY does the trick so yes you can use this rom and flash it with the TWRP.
If this is a first installation, format the data.
Exact, I looked for the MOJITO and apparently the SUNNY does the trick so yes you can use this rom and flash it with the TWRP.
If this is a first installation, format the data.
Click to expand...
Click to collapse
Thank you
I try to flash xiaomi.eu_multi_HMNote10_V13.0.11.0.SKGMIXM_v13-12.zip with twrp.
First I format data. Then I reboot to recovery and flash the file...
but I get an error:
Code:
mkdir "/cache/recovery/682af685bee328ad0ad286918h88aded905b5bb4" failesd:
File exists
E2001: Failed to flash cust partition.
Updater process ended eith ERROR: 1
What can I do?
nierewa said:
I try to flash xiaomi.eu_multi_HMNote10_V13.0.11.0.SKGMIXM_v13-12.zip with twrp.
First I format data. Then I reboot to recovery and flash the file...
but I get an error:
Code:
mkdir "/cache/recovery/682af685bee328ad0ad286918h88aded905b5bb4" failesd:
File exists
E2001: Failed to flash cust partition.
Updater process ended eith ERROR: 1
What can I do?
Click to expand...
Click to collapse
Is the twrp you are using is A12?
On which rom currently?
Yes. Is A12. Version 3.7.0_12-0 from here
Forum thread
I've installed currently cDroid 8.9
nierewa said:
Yes. Is A12. Version 3.7.0_12-0 from here
Forum thread
I've installed currently cDroid 8.9
Click to expand...
Click to collapse
Maybe the same to check https://sourceforge.net/projects/recovery-for-xiaomi-devices/files/sunny/
try to flash a stock rom with the TWRP, let the phone restart and arrive on Xiaomi account, switch to Fastboot mode and flash the TWRP and try again the Xiaomi Eu rom, if it does not work, use Miflash.
TWRP/wipe format data type yes reboot TWRP/flash rom.
Ok. I'll try it.
Doesn't work with this twrp. Same error.
So I download this recovery rom and flash it with twrp.
All good.
Then I flash twrp again and format date.
Try to flash the EU custom rom... same error. ...File exist...
How can I do this with Miflash?
I extract the EU custom Rom. Load it to MiFlash and get error:
---------------------------
couldn't find flash script.
---------------------------
nierewa said:
Doesn't work with this twrp. Same error.
So I download this recovery rom and flash it with twrp.
All good.
Then I flash twrp again and format date.
Try to flash the EU custom rom... same error. ...File exist...
How can I do this with Miflash?
I extract the EU custom Rom. Load it to MiFlash and get error:
---------------------------
couldn't find flash script.
---------------------------
Click to expand...
Click to collapse
Miflash is only for stock roms.
Try this Xiaomi Eu rom fastboot.zip.xiaomi.eu_multi_HMNote10_V13.0.8.0.SKGMIXM_v13-12-fastboot.zip
https://sourceforge.net/projects/xi...13.0.7.0.SLMCNXM_v13-12-fastboot.zip/download
Extract the folder from the zip, then run the file first install.bat,phone in Fastboot mode.
You can update afterwards via OTA.
In meantime I tried once again #13
This time it works. Now I use Eu custom Rom.
Thanks for all your help