Did I brick my Doogee X6 - Android Q&A, Help & Troubleshooting

I rooted my Doogee X6 two weeks ago and experimented with the stock ROM using Kingo root. Then last night I decided to flash it with TWRP Custom ROM. in both circumstances I didn't use a PC because I have non. After wiping everything my phone got stuck until I was forced to pluck out the battery (very brave but also stupid!).When I powered it on, it displays only the brand logo and the only way to power it off is by taking out battery. It won't reboot into recovery. Can someone please help me. I'm lost. I know I messed up big time! thank you.

Code:
muketah said:
I rooted my Doogee X6 two weeks ago and experimented with the stock ROM using Kingo root. Then last night I decided to flash it with TWRP Custom ROM. in both circumstances I didn't use a PC because I have non. After wiping everything my phone got stuck until I was forced to pluck out the battery (very brave but also stupid!).When I powered it on, it displays only the brand logo and the only way to power it off is by taking out battery. It won't reboot into recovery. Can someone please help me. I'm lost. I know I messed up big time! thank you.
Click to expand...
Click to collapse
Just go to your closest friend or cafeteria that has a pc and internet , download sp flash tools, download the full doogee x6 rom from www.needrom.com/Doogee flash it back and youre good to go! Hit thanks if i helped!

Related

[BRICKED] Need help!! Alcatel One Touch S'Pop (4030x)

Hi guys, new to the forum, but been reading for a while now.
I need some help with my gf's device which i got messed.. So here is the problem:
Device: Alcatel One Touch S'Pop (4030x)
Carrier: Globul(Bulgarian)
Root: YES
SU Status: Installed SuperSU
Stock firmware: latest ver of Android JB 4030x modded for globul
Recovery: Selfmade CWM.
So the problem is that the device was stock and sim locked by carrier globul, what i was trying to do is root inastall cust recovery and install new rom, hoping that this will debloat the device and eventualy sim unlock it, now i am stuck with a white screen every time i try to boot it, juat after the first boot animation. Tried to go to recovery - work flawlessly. Tried re-installing the custom ROM several times with no luck.. Here is what i done:
Rooted with VRoot, then installed CWM recovery via MTK Droid Root & Tools, all worked fine, the stock (rooted) ROM booted with no problems at all (restarted couple o times)
Then i downloaded to my SD the last version of GE-Rom from MXDevelopers blog and tried to flash it via recovery, following their guide(only difference that i used CWM instead of TWRP) everything went well and nice, then i pressed "Reboot device now" option in the recovery and it rebooted, shown the 1st bootlogo and than that white screen (ofdeath) and it doesn't do anything except when i press volume down and hold it, it vibrates as when you switch silent mode on with the vol keys, also i noticed that the power button works as supposed (locks unlocks).
What i need to do is getting a custom rom working on the device, or at least a stock (non globul) rom working on it..
I tried to flash thru recovery the X9 ROM in hope it will do the job but null... I tried several times to install and re install the rom with no succes so far. What i am thinking is that i somehow damaged the boot image ( i havent touched it but i dont know if the custom rom had tried to modify it. )
Please help!!
Will click the thanks button, i promise
If anything in the given information is unclear, just ask and i will clear it for you, or in case i haven't given enough info on something..
C'mon guys.. Why nobody posting ? I followed the help request guide, i made clear what the problem is and i've given all the information that is avail. ...
I mean.. Please help, any help, advice or whatever will be highly apreciated.. You see, i'm new here but if there is something i can help with - then i will do it.. I know that some devs here do have got that model of alcatel..
I had a very similar problem to yours and
Only resolved it today. Go into XDA and search
Bricked Alcatel 4030. Wergi1 has the solution
Well it worked for me good luck.

Phone won't boot after updating SuperSU

I need help immediately cause I am paniking. So I rooted my phone using the KingRoot application, and after the root was succesful used SuperSu-Me to remove KingRoot. SuperSu-Me installed SuperSU on my device which in turn had to install an update, so I let it do its thing. After the update was installed SuperSU prompted me to reboot my phone so i did. Problem is the phone has been stuck for about half an hour in the shifting shapes screen, fastboot doesn't work. I have tried hard reseting it but the problem persists.
JimmyTsiakalos said:
I need help immediately cause I am paniking. So I rooted my phone using the KingRoot application, and after the root was succesful used SuperSu-Me to remove KingRoot. SuperSu-Me installed SuperSU on my device which in turn had to install an update, so I let it do its thing. After the update was installed SuperSU prompted me to reboot my phone so i did. Problem is the phone has been stuck for about half an hour in the shifting shapes screen, fastboot doesn't work. I have tried hard reseting it but the problem persists.
Click to expand...
Click to collapse
Kingroot is not good afaik. Follow this guide to root or unlock.
http://forum.xda-developers.com/oneplus-x/general/discussion-how-to-root-oneplus-x-t3242830/page1
JimmyTsiakalos said:
I need help immediately cause I am paniking. So I rooted my phone using the KingRoot application, and after the root was succesful used SuperSu-Me to remove KingRoot. SuperSu-Me installed SuperSU on my device which in turn had to install an update, so I let it do its thing. After the update was installed SuperSU prompted me to reboot my phone so i did. Problem is the phone has been stuck for about half an hour in the shifting shapes screen, fastboot doesn't work. I have tried hard reseting it but the problem persists.
Click to expand...
Click to collapse
Found a solution?
My solution
I fixed it by unlocking the bootloader in fastboot mode, flashing TWRP and using it to flash the original version of the oxygen os, the one that came preloaded with the phone.
Please help me too I'm literally panicking this is my one and only device and it happened just like exactly yours. After supersume asked to reboot my phone now it is stuck on the phone logo screen. Help me pleaaase (( My phone is very important to me. I've been searching for forums and I only found yours that had the same problem with me. By now it's about 1hr just stuck in there ( please help me im begging you!
Yobel14 said:
Please help me too I'm literally panicking this is my one and only device and it happened just like exactly yours. After supersume asked to reboot my phone now it is stuck on the phone logo screen. Help me pleaaase (( My phone is very important to me. I've been searching for forums and I only found yours that had the same problem with me. By now it's about 1hr just stuck in there ( please help me im begging you!
Click to expand...
Click to collapse
Does your recovery work? And also, which recovery do you have?
aamodjoshi23 said:
Does your recovery work? And also, which recovery do you have?
Click to expand...
Click to collapse
Thank you for replying. I'm sorry I don't know what a recovery is. My phone is Starmobile Knight luxe lollipop 5.1 . Help I cant afford to buy a new one What would I do in this situation . I'm thinking of removing the battery then putting back it again. It won't even turn off just stucked on the logo.
JimmyTsiakalos said:
I fixed it by unlocking the bootloader in fastboot mode, flashing TWRP and using it to flash the original version of the oxygen os, the one that came preloaded with the phone.
Click to expand...
Click to collapse
can you please tell me how to flash twrp recovery on pc? mine says partition "recovery" does not support. basically it fails
Yobel14 said:
Thank you for replying. I'm sorry I don't know what a recovery is. My phone is Starmobile Knight luxe lollipop 5.1 . Help I cant afford to buy a new one What would I do in this situation . I'm thinking of removing the battery then putting back it again. It won't even turn off just stucked on the logo.
Click to expand...
Click to collapse
First, please don't follow instructions you're finding on this specific forum since it's for the OnePlus X, not the Starmobile. Secondly you needed to unlock your bootloader first, since you didn't from the sounds of it you can't boot into Android since it's now tampered. You'll need to boot into recovery, usually by pressing Power + Volume Down until it loads and factory reset your device.
Yobel14 said:
Thank you for replying. I'm sorry I don't know what a recovery is. My phone is Starmobile Knight luxe lollipop 5.1 . Help I cant afford to buy a new one What would I do in this situation . I'm thinking of removing the battery then putting back it again. It won't even turn off just stucked on the logo.
Click to expand...
Click to collapse
Try to find out your solution in your device's forums, since this forums is for the OnePlus X and not the Starmobile Knight Luxe.
If your device is stuck on the bootup screen, you need to go to fastboot mode, unlock the bootloader (if you haven't), flash a custom recovery, boot into the recovery, and factory reset the device. It should work.
Guys!!! Thank you for all your suggestions. I did flash a custom recovery but it fails simultaneously. I just let it fix on a local phone repair shop just paid a few bucks

ZTE Nubia Z11 Max NX523J Stuck in BootLoop after V1.43 Update Failure

Hi Folks,
The Phone is stuck at Nubia Logo, and just stays there. TWRP was successfully installed and phone was rooted. Before actually loading the update package, i performed a wipe (delvik, system, data) and flashed a Stock Recovery. It prompted for Reboot which i did and the bad luck started.
Now, Vol-Up+Power boots into stock Recovery but unfortunately i do not have a backup nor an official Nubia ROM for the handset & hence can't do anything. Vol-Down+Power boots into Bootloader in which all the options pretty much take me back to Stock Recovery.
I know i made a stupid mistake but it would be really really helpful if anyone could please help put an end to my misery and undo this error. I have already tried discharging completely and then trying to power it back on again but to no avail.
Thanks in advance
Guys, a little help here please!!
My laptop does not recognize the device, it doesn't even appear when connected via USB Cable, although it charges alright.
I tried installing Nubia Recovery Tool but unfortunately it was in Chinese and I could not understand one word of it.
Please HELP!!
Hi Goraya,
I get a lot of answers from Pesa1234, hi is from Italy so his English is not that good.
I use the ComboRom 4.2 and in principle it is good, although I don't have fast charging.

Phone stuck in boot loop

Hello guys,
Sorry if this has been posted, but I was unable to find it on the forum, and I searched, a lot.
Problem is that suddenly, the phone got stuck in an infinite boot loop. It powers up, shows the white screen with black letters Blu boot up screen, and then powers back off. Then repeats.
I'm able to press the Volume Up key, and it gets to the Recovery menu, but before I can do anything, it powers back off, and then repeats the loop.
Any ideas? Help? Will be much appreciated. Thank you!
Try reflashing Lollipop stock ROM using SP Flash Tools with proper drivers.
Install VCOM drivers for MTK.
1. Download SP Flash tools for the BLU Vivo 5/A55 Slim from here
2. Download the repair ROM for the BLU Vivo 5 from here. This will remove everything on your phone, completely resetting it.
Note: This is the repair ROM for the BLU Vivo 5. If you are on some other Device, please use a google search and locate the repair ROM for your specific device. It will be approximately 1 to 2 GB in size.
3. Flash the repair ROM to your phone with SP Flash Tools.
4. Use OTA to update your phone to Marshmallow.
Click to expand...
Click to collapse
If you need help, comment.
Letrix said:
Try reflashing Lollipop stock ROM using SP Flash Tools with proper drivers.
Install VCOM drivers for MTK.
If you need help, comment.
Click to expand...
Click to collapse
Hi Letrix, thank you for the reply. I've seen some posts about re-flashing, but the idea is to keep the information on the phone, specifically, the photos. Is there any alternative to re-flashing without loosing the information?
lokiyito said:
Hi Letrix, thank you for the reply. I've seen some posts about re-flashing, but the idea is to keep the information on the phone, specifically, the photos. Is there any alternative to re-flashing without loosing the information?
Click to expand...
Click to collapse
Make a backup with TWRP.

Xiaomi Redmi Note 4 Soft Brick. SOMEONE HELP ME PLEASE!!

Hello guys! I REALLY need of your help, i'm totally desperate! I bricked my Redmi Note 4 (Snapdragon) trying to put root through custom recovery (TWRP). I successfully flash custom recovery and root, but my cell phone stayed in soft brick.
I tried several desperate attempts to make the cell phone back to normal.
But I think now I killed my cell phone once, I was flashing the MIUI 8.2 ROM stock by the XiaoMiFlash application, and accidentally I put it to lock the bootloader when the process was finished. And the my cellphone stills in Soft brick:crying::crying:]
Before that I tried flashing the MIUI 9.5 ROM stock by TWRP (I know it was stupid of me) and ended up giving error.
I still have access to fastboot, but I do not know what to do. Please, help me, I'm totally desperate. I will be very grateful for who help me !!!
Sorry for my bad english:crying:
Download Mi Tool, chose device manually i n your case its Mido, then chose which rom you want to put on your cell phone. After that it will ask you to put phone in fast boot mode. Approximately 10min and you are stock
augusto334 said:
Hello guys! I REALLY need of your help, i'm totally desperate! I bricked my Redmi Note 4 (Snapdragon) trying to put root through custom recovery (TWRP). I successfully flash custom recovery and root, but my cell phone stayed in soft brick.
I tried several desperate attempts to make the cell phone back to normal.
But I think now I killed my cell phone once, I was flashing the MIUI 8.2 ROM stock by the XiaoMiFlash application, and accidentally I put it to lock the bootloader when the process was finished. And the my cellphone stills in Soft brick:crying::crying:]
Before that I tried flashing the MIUI 9.5 ROM stock by TWRP (I know it was stupid of me) and ended up giving error.
I still have access to fastboot, but I do not know what to do. Please, help me, I'm totally desperate. I will be very grateful for who help me !!!
Sorry for my bad english:crying:
Click to expand...
Click to collapse
+1 on guy below ten mins tops few guides on YouTube

Categories

Resources