Hi everyone,
I have a wiko rainbow and i'm having some problems. One day it was with low battery and now it doesn't turn on. When i try to turn it on it starts to boot loop (the android and wiko symbol appear then it turns off then the symbols appear again and so on). When I try to charge it shows a low battery symbol and automaticly it starts the boot loop (without pressing the power button).
I've already tried to:
- do a factory reset or recovery mode but when I press volume up or down the boot loop starts again.
- flash it with the original stock rom (from wiko website) and had no success. I've tried to flash with both the battery on and off. When I try to flash with wiko software it says "An error has occurred. Download interrupted". When I try to flash with SP Flash tool it says "BROOM ERROR : S_FT_GET_MEMORY_FAIL (xFDA) Cannot find memory."
Please help me, thanks
Martinina said:
Hi everyone,
I have a wiko rainbow and i'm having some problems. One day it was with low battery and now it doesn't turn on. When i try to turn it on it starts to boot loop (the android and wiko symbol appear then it turns off then the symbols appear again and so on). When I try to charge it shows a low battery symbol and automaticly it starts the boot loop (without pressing the power button).
I've already tried to:
- do a factory reset or recovery mode but when I press volume up or down the boot loop starts again.
- flash it with the original stock rom (from wiko website) and had no success. I've tried to flash with both the battery on and off. When I try to flash with wiko software it says "An error has occurred. Download interrupted". When I try to flash with SP Flash tool it says "BROOM ERROR : S_FT_GET_MEMORY_FAIL (xFDA) Cannot find memory."
Please help me, thanks
Click to expand...
Click to collapse
i forgot to say i've already tried flash with diferent usb cables in different usb ports
Related
i have a tecno f8 device, it has MT6589 processor. The phone hanged one time and i forced restart it holding down the power button for about 10secs, unfortunately when the phone restarts, it kept coming on and off, and here is where i think i bricked the phone, the phone's battery was at 10%..i pulled the battery and loaded the cmw recovery plugged in the charger, and i tried reflashing my custom rom (miui v5).. the rom installed completely.. then i went to 'reboot now' from the cmw menu options, and then my phone refused to come on, its just dead, led light wont even come on if i plug the charger, and i cant boot into recovery.
i have been to a number of android developmental blogs trying to solve this issue, i even download the stock firmware and i tried flashing with sp flash tools, but i keep getting various brom errors, the 3149, 5069 no space errors.
can anyone pls help me get my phone back on?
I have a Symphony W85 MTK-6572...
I recently installed a Custom ROM after which my Phone turns off instantly on the Boot Screen... I can still enter the recovery mode and have tried a lot of ROMs which previously worked on my phone... But now the phone turns off instantly after the boot screen appears...
Finally, I downloaded the correct Stock ROM and tried to flash using SP Flash Tool...
I removed the battery, SD card, sim card, then connected the phone by holding on the vol (+) button, the phone connects and disconnects instantly from the USB port... The MT-65xx Preloader appears and then disappears instantly in the Device Manager... So I cannot install the Stock ROM also...
Please, I am in desperate need help regarding this issue...
Hello everyone, I have an archos 50d helium Android 5.1 Lollipop, which practically when turned on remains locked in the logo screen, the one with the archos logo and does nothing, does not continue and therefore does not turn on. I turned it on with the vol + key entering in recovery mod and doing the various wipe cache, total formatting, but nothing has changed, the phone remains locked. I tried to download CWM and do apply update via sd but any file I put (even the phone's firmware i tried like 10 .zip file) has always given me E: footer is wrong, signature verification failed, Installation aborted. While trying to turn it on with the volume key - it does nothing and does not go into download mode. As soon as I put the charger on the phone, if it is off, it turns on and remains locked in the logo (Archeos), but I think it charge because it stayed for a long time in recovery mode or in logo mode. Obviously the phone does not turn on and I can not use it in the download mode because it does not enter or use odin. So I have no idea what to do with it. I was just installing an app, it turned off and from that moment on forever it seems. What do you suggest to do? Thank you. :fingers-crossed:
up
Hi everyone, I just received my Teclast M30 (10-inch tablet), version M5P3. I tried flashing a custom ROM but - surprise - I'm stuck on a bootloop.
The stock ROM was an Android 8 version. It is not rooted.
- I went into the developer options and allowed Bootloader unlocking via the corresponding option.
- Then via fastboot, I unlocked the Bootloader via (without any error):
Code:
fastboot flashing unlock
- Flashed TWRP, found on the only Teclast M30 thread... (=> https://forum.xda-developers.com/showpost.php?p=81064235&postcount=56) via fastboot (without any error):
Code:
fastboot flash recovery twrp-3.3.1-teclast-m30-20191201.img
- Flashed a GSI (ARM64 A-only) ROM (without any error). I used the "Android 9 - Havoc-OS v2.9" ROM on this link => https://github.com/phhusson/treble_experimentations/wiki/Teclast-m30-(MT6797x-helio-x27))
Code:
fastboot flash system Havoc-OS-v2.9-20190914-phhgsi_arm64_a-Official.img
I realized after a few hours that the TWRP I used was for the M4P7 version and mine is M5P3.. so I now know what I did wrong but even with this info, it doesn't help for my problem.
When trying to boot after flashing, I'm stuck on a bootloop.
It shows the Teclast Logo with some text saying it's in Orange State (= show a message saying the is bootloader unlocked) and then go to a screen with an Android Logo and a message saying: "No Command".
This "No command" screen is well known in our forum BUT problem is this screen stays only for about 3 seconds, and then the screen become black for 1 sec, then the "No Command" screen appears again for 3 sec, then it disappears again, endlessly. Here is a video of what's going on https://www.youtube.com/watch?v=O1iiu6MtOyM
Pressing "Power & Vol+" or "Power Button & Vol-" on this screen does nothing, I just can't enter fastboot mode as it keep looping and do not stay on the "No Command" screen.
When the tablet is completely shut down, I tried powering it up pressing just the "Power" button, but also "Power & Vol+", "Power Button & Vol-" but it does the same thing every time. It also acts identical whether the tablet is plugged in to the computer or just charging on the wall plug.
There is a "Reset" button on the tablet (must use a SIM pin to press it) but it seems useless to reset the device. When pressing it, it only shut down the tablet and stops the loop. I tried pressing it for long periods like 10-20-30 seconds in different situations but it just shut down the device and do nothing.
Does anyone have any leads on what I can do to revert back to original state or even just access fastboot mode ?
Thanks
I have the factory firmware file for my tablet (the good version this time..) now, but still the same problem of looping...
For future reference:
I fixed it thanks to the stock firmware and a tool (SP Flash Tool) that are both included in a file package provided by the constructor (at the time I created this post, this file didn't exist on their website. Now it does ).
This file is hosted on Baidu (only accessible with an account, and you need a Chinese phone number to create one) so I uploaded it on Mega if anyone need it:
https://mega.nz/file/3wAQDIrA#44HoXZxLt19mPo1XbzRbMPSCuZ9kZKIRWTWPvUJJhdY
Bye!
Edit: I managed. Thanks anyway!
I done goof'd when trying to flash custom recovery, now phone gives "secure booting error! Cause: boot certification verify" when trying to boot.
I'm unable Fastboot - all the tutorials I found give me wrong instructions (*more details at the end).
So I'm trying to flash stock rom, but every flashing software I tried either had a broken download link (LG's official site is hot garbage), Needs a password (seriously, why), or doesn't run on my perfectly fine, modern enough PC (Ryzen gen 2).
Any help? With either a normal Flashtool (please link), or a way to enter Fastboot?
*Volume+ power, release when logo appears, then holding down volume+power again brings me to factory rest. Not even recovery. Choosing "Yes" on factory reset does nothing.
*Powering off, then holding volume up while plugging in the USB brings me to download mode. Keeping the same butting still held does nothing.
*Powering off, then holding volume down while plugging in the USB does nothing (boots normally, then displays the booting error I mentioned earlier).
I have similar problem with LG G2 mini: Secure booting error: Boot certification verify. I tried turn on download mode but I can not turn on download mode. I tried t flash smartphone by flashing software LG flash tools but this program hangs. Exception code: c0000005. Can you help me?