I got the dev preview going. Unlocked bootloader. Tried to flash twrp 3.0.2-2 through fastboot commands. Looked like it went well but when I try and boot into recovery I got the droid with red triangle.
Am I using the right version or doing it wrong? Also when I get twrp up and going, what's the best root file to flash? I wanna pixelize my 6p.
Thanks !!
Sent from my SM-G930T using XDA-Developers mobile app
ryanbmw51 said:
I got the dev preview going. Unlocked bootloader. Tried to flash twrp 3.0.2-2 through fastboot commands. Looked like it went well but when I try and boot into recovery I got the droid with red triangle.
Am I using the right version or doing it wrong? Also when I get twrp up and going, what's the best root file to flash? I wanna pixelize my 6p.
Thanks !!
Sent from my SM-G930T using XDA-Developers mobile app
Click to expand...
Click to collapse
So I had a similar issue. I flashed the OTA and forgot to flash SU before the reboot. This is why you can not get TWRP to flash. To fix this use Wug's tool kit found here, http://forum.xda-developers.com/nexus-6p/development/toolkit-wugs-nexus-root-toolkit-v2-1-0-t3258493.
In stall tool kit on PC and when prompted for android version select ANY, should be the last choice on the list (don't select the version you have i.e 7.0, 7.0 etc). Then click root with TWRP and wait for it to go through the process. Now you will have TWRP working and SU in stalled. It will install the latest versions of both, so no worries there.
Good luck!
phillymade said:
So I had a similar issue. I flashed the OTA and forgot to flash SU before the reboot. This is why you can not get TWRP to flash. To fix this use Wug's tool kit found here, http://forum.xda-developers.com/nexus-6p/development/toolkit-wugs-nexus-root-toolkit-v2-1-0-t3258493.
In stall tool kit on PC and when prompted for android version select ANY (don't select the version you have i.e 7.0, 7.0 etc). Then click root with TWRP and wait for it to go through the process. Now you will have TWRP working and SU in stalled. It will install the latest versions of both, so no worries there.
Good luck!
Click to expand...
Click to collapse
Thanks for the response. I've used wugfrsh for years. When I try to use it this time it reboots to bootloader fine but when it says the device is booting temporarily into twrp the phone never does it. It just stays in BL screen.
Edit...think I got it. Thanks for your help. Needed to change to "any build".
If you dont mind. Did you get all the pixel mods running? Assist, camera, etc? Which method did you follow? I see multiple methods available with some issues here and there.
Thanks again.
Sent from my SM-G930T using XDA-Developers mobile app
ryanbmw51 said:
Thanks for the response. I've used wugfrsh for years. When I try to use it this time it reboots to bootloader fine but when it says the device is booting temporarily into twrp the phone never does it. It just stays in BL screen.
Sent from my SM-G930T using XDA-Developers mobile app
Click to expand...
Click to collapse
Did you select the any version of android? That is odd, it worked fine for me on 7.0 and 7.1.1. Did you run it as admin? Try tuning off you Anit-virus, in the past that interfered for me unlocking HTC bootlodaers
Perhaps a different tool kit would work for you.
---------- Post added at 08:12 PM ---------- Previous post was at 08:11 PM ----------
Without root TWRP won't stick.
phillymade said:
Did you select the any version of android? That is odd, it worked fine for me on 7.0 and 7.1.1. Did you run it as admin? Try tuning off you Anit-virus, in the past that interfered for me unlocking HTC bootlodaers
Perhaps a different tool kit would work for you.
Click to expand...
Click to collapse
Please see my edit in previous post.
Sent from my SM-G930T using XDA-Developers mobile app
ryanbmw51 said:
Thanks for the response. I've used wugfrsh for years. When I try to use it this time it reboots to bootloader fine but when it says the device is booting temporarily into twrp the phone never does it. It just stays in BL screen.
Edit...think I got it. Thanks for your help. Needed to change to "any build".
If you dont mind. Did you get all the pixel mods running? Assist, camera, etc? Which method did you follow? I see multiple methods available with some issues here and there.
Thanks again.
Sent from my SM-G930T using XDA-Developers mobile app
Click to expand...
Click to collapse
Yes, I have the camera working. Got it from the app thread, as well as the launcher. For assistant to work I just did the build prop edit.
Find: ro.product.model=Nexus 6P and change it to
ro.product.model=Pixel XL
Then add this line:
ro.opa.eligible_device=true
save and reboot. Long press home and set it up.
Here for apps http://forum.xda-developers.com/nexus-6p/themes-apps/pixel-skin-apps-t3486186
For me, the round icons did not work so well.
phillymade said:
Yes, I have the camera working. Got it from the app thread, as well as the launcher. For assistant to work I just did the build prop edit.
Find: ro.product.model=Nexus 6P and change it to
ro.product.model=Pixel XL
Then add this line:
ro.opa.eligible_device=true
save and reboot. Long press home and set it up.
Here for apps http://forum.xda-developers.com/nexus-6p/themes-apps/pixel-skin-apps-t3486186
For me, the round icons did not work so well.
Click to expand...
Click to collapse
Cool. Not a fan of the round icons. What about boot animation? Grt that going at all?
Sent from my SM-G930T using XDA-Developers mobile app
ryanbmw51 said:
Cool. Not a fan of the round icons. What about boot animation? Grt that going at all?
Sent from my SM-G930T using XDA-Developers mobile app
Click to expand...
Click to collapse
Boot ani is good,deleted the stock one and just copy and paste into system>media> set permissions and reboot.
In the app thread there is a black version of the boot ani as well, I prefer the stock white
Oh, don't forget the live wallpaper apk, its worth it. I like the globe the best, it moves according to the time of day. its sweet.
Yea. I'm in good shape now. Found a badass camera app with zero shutter lag. Everything else is now totally pixelized. Can't wait to see how battery compares to a pixel thanks for all the help.
Still using my s7 while the pixel 6p charges.
@phillymade
Thanks for the help dude
Sent from my SM-G930T using XDA-Developers mobile app
ryanbmw51 said:
Yea. I'm in good shape now. Found a badass camera app with zero shutter lag. Everything else is now totally pixelized. Can't wait to see how battery compares to a pixel thanks for all the help.
Still using my s7 while the pixel 6p charges.
@phillymade
Thanks for the help dude
Sent from my SM-G930T using XDA-Developers mobile app
Click to expand...
Click to collapse
What camera are you using
Sent from my Nexus 6P using Tapatalk
phillymade said:
What camera are you using
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
This is the camera he talks about:
http://forum.xda-developers.com/nexus-6p/themes-apps/mod-camera-nx-v4-google-camera-zsl-hdr-t3494435
pbsec said:
This is the camera he talks about:
http://forum.xda-developers.com/nexus-6p/themes-apps/mod-camera-nx-v4-google-camera-zsl-hdr-t3494435
Click to expand...
Click to collapse
Yea that's the one. So far so good guys. Only prob I run into with the OS so far is a couple apps won't open and FC like Amazon and another Tapatalk app I use for my replica watch addiction. Battery not great so far but will get better i think.
phillymade said:
What camera are you using
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Hey bro. Any input on dropping back to 7.0 through flash stock feature on NRT? I wanna maybe go back down with no wipe. I know if I unenrolled from beta program it'll drop me back but wipe data.
Sent from my SM-G930T using XDA-Developers mobile app
ryanbmw51 said:
Hey bro. Any input on dropping back to 7.0 through flash stock feature on NRT? I wanna maybe go back down with no wipe. I know if I unenrolled from beta program it'll drop me back but wipe data.
Sent from my SM-G930T using XDA-Developers mobile app
Click to expand...
Click to collapse
I tried it. Didn't work. Kept getting FC pop-ups. Well worth a try I guess.
Sent from my SM-G930T using XDA-Developers mobile app
ryanbmw51 said:
Hey bro. Any input on dropping back to 7.0 through flash stock feature on NRT? I wanna maybe go back down with no wipe. I know if I unenrolled from beta program it'll drop me back but wipe data.
Sent from my SM-G930T using XDA-Developers mobile app
Click to expand...
Click to collapse
Well if you downgrade, a full wipe would be in order. I for one had fc's on 7.1.1. I did a full wipe and clean install of the system image. All is well now except for amazon app store. But this is no surprise as it did this with the 7.0 preview as well, I can live with this. It will be updated soon enough.
You want unofficial twrp 3.0.2-3. See this thread for details and a download link.
http://forum.xda-developers.com/nex...recovery-twrp-2-8-7-0-touch-recovery-t3234976
Related
https://play.google.com/store/apps/details?id=com.saurik.substrate
I'm just about to install myself and check it out. I loved using this on my ipod touch, and can now share the love with my android. It seems like a good alternative to Xposed!
Update: So far been running without a hiccup. I installed Cydia Substrate and Winterboard and they work flawlessly. UI/UX of the the apps can use some polishing, but so can every initial release!
Not what I expected.
mcmb03 said:
*LINK REMOVED DUE TO LESS THAN 10 POSTS*
I'm just about to install myself and check it out. I loved using this on my ipod touch, and can now share the love with my android. It seems like a good alternative to Xposed!
Update: So far been running without a hiccup. I installed Cydia Substrate and Winterboard and they work flawlessly. UI/UX of the the apps can use some polishing, but so can every initial release!
Click to expand...
Click to collapse
So I am an Apple fanboy lol (Although I've always loved Android too, just always had iPhones). So you can imagine my excitement when Winterboard came to the play store.
After I downloaded both substrate and Winterboard, I tried activating one of my Icon themes. After I hit "Restart Zygote" the phone rebooted like normal, but once it was back on, all my apps were crashing. I couldn't open anything. Once I restarted my phone, I was stuck in a boot loop. Tried everything I could but ended up having to re-flash stock firmware through ODIN.
I have used Winterboard on almost every iPhone I've ever owned. I upgraded from the iPhone 5 to the Galaxy S4. I have about 4 years of jailbreaking under my belt and have never had this happen with Winterboard. I'm 99% certain it was not user error, but I'm not ruling out that possibility.
Point is, I won't be using Winterboard for quite a while. Just wanted to let people know this boot loop is a possibility.
Too each their own lol. I went to android for a reason
Why would someone want this?
Sent from my SAMSUNG-SGH-I337 using xda premium
htcslic said:
Why would someone want this?
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
I installed it. It works like xPosed but according to the dev you can hook native code not just java, and even hook native deamons. If it is useful devs wil use it to do things, if not just one more app I have on my phone.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Same thing happened to me. I wanted to try it out really just for nostalgic reasons from back in my iPhone days. Maybe saurik should stick with the fruit
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
idk why you guys are hating so much, but this has a lot of potential and was only just released..
Nitroglycerin said:
After I downloaded both substrate and Winterboard, I tried activating one of my Icon themes. After I hit "Restart Zygote" the phone rebooted like normal, but once it was back on, all my apps were crashing. I couldn't open anything. Once I restarted my phone, I was stuck in a boot loop. Tried everything I could but ended up having to re-flash stock firmware through ODIN.
Click to expand...
Click to collapse
Big-A-Rob said:
Same thing happened to me.
Click to expand...
Click to collapse
For people having problems try this :
Google Play App Description said:
If, while using WinterBoard, you run into any problems (such as it crashes on boot, preventing your device from starting), please remember that Substrate has a safety feature built into it: you can hold your device's volume up button to temporarily disable Substrate so that WinterBoard is not loaded, and then your device boots correctly.
Click to expand...
Click to collapse
kylecore said:
For people having problems try this :
Click to expand...
Click to collapse
Yeah no that didn't work for me...the phone wasn't actually bootlooping, it just kept on booting into recovery mode. I'd actually rather it have bootlooped, in which case I could have used ADB to delete the lib file that loaded the substrate (or maybe the up-button fix would have had a chance to work).
Had to flash system img from Odin.
CPA Poke said:
Yeah no that didn't work for me...the phone wasn't actually bootlooping, it just kept on booting into recovery mode. I'd actually rather it have bootlooped, in which case I could have used ADB to delete the lib file that loaded the substrate (or maybe the up-button fix would have had a chance to work).
Had to flash system img from Odin.
Click to expand...
Click to collapse
Ahh i see, well i installed it and didn't have the problem. Haven't installed any packs yet though.
Did you install anything after?
CPA Poke said:
Yeah no that didn't work for me...the phone wasn't actually bootlooping, it just kept on booting into recovery mode. I'd actually rather it have bootlooped, in which case I could have used ADB to delete the lib file that loaded the substrate (or maybe the up-button fix would have had a chance to work).
Had to flash system img from Odin.
Click to expand...
Click to collapse
Yeah I was a little wrong calling it a boot loop lol. It was just booting to safe mode. Had to flash stock ROM.
Sent from my SAMSUNG-SGH-I337 using xda premium
---------- Post added at 12:04 PM ---------- Previous post was at 12:00 PM ----------
kylecore said:
Ahh i see, well i installed it and didn't have the problem. Haven't installed any packs yet though.
Did you install anything after?
Click to expand...
Click to collapse
With me, it happened with an icon pack I had already downloaded before winterboard.
Sent from my SAMSUNG-SGH-I337 using xda premium
kylecore said:
Ahh i see, well i installed it and didn't have the problem. Haven't installed any packs yet though.
Did you install anything after?
Click to expand...
Click to collapse
Just installing the apps didn't do anything harmful, it was when I went into the Substrate app and installed the framework (or whatever it is) and that's when the recovery loop started.
So you installed the framework within the app itself and it worked fine for you??
CPA Poke said:
Just installing the apps didn't do anything harmful, it was when I went into the Substrate app and installed the framework (or whatever it is) and that's when the recovery loop started.
So you installed the framework within the app itself and it worked fine for you??
Click to expand...
Click to collapse
When I installed the substrate it worked fine. It was only after I selected an icon pack through winterboard and hit "restart zygote" to apply it did it start recovery looping.
Sent from my SAMSUNG-SGH-I337 using xda premium
CPA Poke said:
So you installed the framework within the app itself and it worked fine for you??
Click to expand...
Click to collapse
That I did, downloaded the app, installed whatever it wanted and let it reboot.
Everythings still working fine but i have nothing to try out with it
Nitroglycerin said:
When I installed the substrate it worked fine. It was only after I selected an icon pack through winterboard and hit "restart zygote" to apply it did it start recovery looping.
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
Where did you get an icon pack? I'd like to see if mine has the same issues.
kylecore said:
Where did you get an icon pack? I'd like to see if mine has the same issues.
Click to expand...
Click to collapse
I had Glass Icon (for the Apex launcher) installed from the play store.
Sent from my SAMSUNG-SGH-I337 using xda premium
Nitroglycerin said:
I had Glass Icon (for the Apex launcher) installed from the play store.
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
Ahh i see, i thought the themes had to be optimized for this before you could use them?
kylecore said:
Ahh i see, i thought the themes had to be optimized for this before you could use them?
Click to expand...
Click to collapse
In the description it says it allows you to use the themes from the play store without using custom launchers. It also says that it works with virtually all if them. To me, that implies that any one you download can be used.
Although since it is very new on Android and doesn't work the same as on iOS, I could be completely wrong haha
Sent from my SAMSUNG-SGH-I337 using xda premium
Nitroglycerin said:
In the description it says it allows you to use the themes from the play store without using custom launchers. It also says that it works with virtually all if them. To me, that implies that any one you download can be used.
Although since it is very new on Android and doesn't work the same as on iOS, I could be completely wrong haha
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
True enough, well I won't try that theme but i'll give another one a shot and see what happens then report back
Nitroglycerin said:
So I am an Apple fanboy lol (Although I've always loved Android too, just always had iPhones). So you can imagine my excitement when Winterboard came to the play store.
After I downloaded both substrate and Winterboard, I tried activating one of my Icon themes. After I hit "Restart Zygote" the phone rebooted like normal, but once it was back on, all my apps were crashing. I couldn't open anything. Once I restarted my phone, I was stuck in a boot loop. Tried everything I could but ended up having to re-flash stock firmware through ODIN.
I have used Winterboard on almost every iPhone I've ever owned. I upgraded from the iPhone 5 to the Galaxy S4. I have about 4 years of jailbreaking under my belt and have never had this happen with Winterboard. I'm 99% certain it was not user error, but I'm not ruling out that possibility.
Point is, I won't be using Winterboard for quite a while. Just wanted to let people know this boot loop is a possibility.
Click to expand...
Click to collapse
I had the same experience. I had to Odin and start from scratch. Thank god for Titanium back up.
kylecore said:
True enough, well I won't try that theme but i'll give another one a shot and see what happens then report back
Click to expand...
Click to collapse
Did you ever try a theme? I'd like to know what happened on your device lol
Sent from my SAMSUNG-SGH-I337 using xda premium
A mysterious file is always generated on my SD card no matter how many times I format it or delete the file. The file has an extension of "MOLOGIQ" and is usually named ".06ba141d-a652-464b-b7c2-0932d1a1402b.mologiq". I have a fear that it is a spyware application that's hidden in my phone. I really can't seem to get rid of it. Any help understanding this or getting rid of it is much appreciated. My phone is rooted, S-OFF, 4EXT. This occurs on any ROM/kernel and even with full wipes and formatting I can't seem to get rid of it.
Just from googleing it comes up as stealth mode start up advertising, which sounds like a load of crap, don't know how or where you got it but it don't sound good
thisis50.com if its hot its here
If a full wipe doesn't fix it, all I could suggest is formatting SD again, through your PC, then run the ruu
Sent from my Evo V 4G using xda app-developers app
Been trying to figure this out forever, I'm coming from mako and this file also has been popping up on my SD, I actually just recently whent back to stock flashed all stock everything and then unlocked boot loader and flashed ROM. This file has come back though.
Sent from my Nexus 4 using xda premium
---------- Post added at 03:52 AM ---------- Previous post was at 03:22 AM ----------
If this helps maybe we can compare apps and see if we have any similar ones, these are all my 3rd party apps.
Adobe Flash Player
ASOT unofficial
Chase banking app
Franco Kernel Updater
Gmail
GoBackup
Google Play services
Google Search
PowerAmp/ unlocker
Reddit news free
Solid Explorer/ unlocker
Vaulty
XDA app
YouTube
Zedge
Sent from my Nexus 4 using xda premium
Just happened seconds ago, opened it up with text editor. Only thing I did since I rebooted my phone was uninstall an app.
Sent from my Nexus 4 using xda premium
Lol I get this too...Not sure what it is... What rom and kernel are you on? I'm on pa with AK kernel
Sent from my Galaxy Nexus using Tapatalk 2
808phoneaddict said:
Lol I get this too...Not sure what it is... What rom and kernel are you on? I'm on pa with AK kernel
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
I'm a flashaholic if that's how you spell it. v.v
It shows up on any ROM I use. Even on the ROMs that have full wipe aroma, I've even used ROMCleaner, and all the wipes in 4EXT, including SD. Thanks for the suggestion guys. If anyone else has anymore I can try, you're more than welcome.
Can I use a logcat to detect this app? Maybe format or delete the file and turn on the logcat and then wait until a it returns and find the item in the log?
Chronosin said:
I'm a flashaholic if that's how you spell it. v.v
It shows up on any ROM I use. Even on the ROMs that have full wipe aroma, I've even used ROMCleaner, and all the wipes in 4EXT, including SD. Thanks for the suggestion guys. If anyone else has anymore I can try, you're more than welcome.
Can I use a logcat to detect this app? Maybe format or delete the file and turn on the logcat and then wait until a it returns and find the item in the log?
Click to expand...
Click to collapse
I go back to factory every once in awhile for a total clean... It's always gone after awhile for that... I'm pretty sure it's an app, rom, or kernel, just not sure which one...
Sent from my Galaxy Nexus using Tapatalk 2
808phoneaddict said:
I go back to factory every once in awhile for a total clean... It's always gone after awhile for that... I'm pretty sure it's an app, rom, or kernel, just not sure which one...
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Do you use SuperSU or "Silent Time"?
I'm sure it's not a kernel or a ROM. :/
On my phone it's 1Weather, whenever I go to its settings.
I use supersu, but that has never been a problem... I used titanium and froze friendcaster and it has never come back... I'm 99% sure it's that app for me.
Sent from my Galaxy Nexus using Tapatalk 2
808phoneaddict said:
I use supersu, but that has never been a problem... I used titanium and froze friendcaster and it has never come back... I'm 99% sure it's that app for me.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Ah, thank you. I'll try that. Ever since I installed CM 10.1 it hasn't come back. I'm starting to also blame Adaway.
I had the same file on my vibrant and sgs2 i was able to remove mine by using my pc windows 7 and doing a format using fat32. worked on both phones and none came back my guess it was a downloaded app
It was reddit news that cause it for me.
Sent from my Nexus 4 using XDA Premium 4 mobile app
Web Presence:
Twitter
Google+
Installation:
Boot into recovery and flash QRemote_V500.zip file.
Download:
HERE
Issues:
You may have to browse to /system/etc/init.d/ and set permissions for file 100Remote to match other files in folder. I had issues at first with proper file permissions so I update the install script but during my testing the Remote program will run even if I do not have proper permission for file.
Thanks to @sefnap for script he created for LG G2.
And this is? :-/
Sent from my GT-N7105 using XDA Premium 4 mobile app
Awesome thanks. I was gonna create this but couldn't get the apk anymore after I had flashed.
Sent from my LG-D801 using Tapatalk
stratus1011 said:
Awesome thanks. I was gonna create this but couldn't get the apk anymore after I had flashed.
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
Is it working properly?
hi! I tried it but don't seems to work with my Toshiba and Sony tv
I'm on cm11
Inviato dal mio LG-V500 con Tapatalk 4
Maelstr0m said:
hi! I tried it but don't seems to work with my Toshiba and Sony tv
I'm on cm11
Inviato dal mio LG-V500 con Tapatalk 4
Click to expand...
Click to collapse
It did not work on my LG TV. I am waiting to hear from a anyone if it works for them to see if there is a problem.
Sent from my LG-D800 using XDA Premium 4 mobile app
Gonna try it right as I get home. Anyway, it would be great if we could get the G2-like QRemote, not just the 'lite' one from the G Pad
No go for me on sale sony tv on cm11. Also neither bluray nor DVD have anything in their lists once you click those options.
Sent from my LG-D801 using xda app-developers app
Is it possible to add Vizio the list of TV makes? This worked great before I moved CM11 and now that I am on CW11 I would love to get my QRemote back but this version post does not list Vizio tv's. (The version that came stock did)
If it helps, I have a backup of the stock rom I made before flashing.
Thanks!
AndroidUser00110001 said:
Web Presence:
Twitter
Google+
Installation:
Boot into recovery and flash QRemote_V500.zip file.
Download:
HERE
Issues:
You may have to browse to /system/etc/init.d/ and set permissions for file 100Remote to match other files in folder. I had issues at first with proper file permissions so I update the install script but during my testing the Remote program will run even if I do not have proper permission for file.
Thanks to @sefnap for script he created for LG G2.
Click to expand...
Click to collapse
Did you notice in the system dump of my GPE that there was a LGQRemote.apk? I ran the APK from root explorer but I didn't get any icons in my launcher.
Mixinitup4Christ said:
Did you notice in the system dump of my GPE that there was a LGQRemote.apk? I ran the APK from root explorer but I didn't get any icons in my launcher.
Click to expand...
Click to collapse
Yes I did notice and got same results. If you use an activity picker to start up remote it does not start up either.
Sent from my LG-D800 using XDA Premium 4 mobile app
colwellkr said:
Is it possible to add Vizio the list of TV makes? This worked great before I moved CM11 and now that I am on CW11 I would love to get my QRemote back but this version post does not list Vizio tv's. (The version that came stock did)
If it helps, I have a backup of the stock rom I made before flashing.
Thanks!
Click to expand...
Click to collapse
Hey AndroidUser00110001 (or anyone), did you see my post (also above) and do you have any ideas? :/ thanks!
colwellkr said:
Hey AndroidUser00110001 (or anyone), did you see my post (also above) and do you have any ideas? :/ thanks!
Click to expand...
Click to collapse
This is not even working fully yet. I lost track of this due to working on GPE ROM. When I have more time I can check why it is not fully working.
From what I have seen the only way to ad other devices would be for LG to allow it. LG encrypts their IR blaster so only devices listed in the quickset device profile work if LGs IR blaster unless someone can crack the encryption. You can search play store for quickset and install the version from play store to see if it has more devices but IR not working yet on AOSP based ROMs yet.
Sent from my LG-D800 using XDA Premium 4 mobile app
AndroidUser00110001 said:
This is not even working fully yet. I lost track of this due to working on GPE ROM. When I have more time I can check why it is not fully working.
From what I have seen the only way to ad other devices would be for LG to allow it. LG encrypts their IR blaster so only devices listed in the quickset device profile work if LGs IR blaster unless someone can crack the encryption. You can search play store for quickset and install the version from play store to see if it has more devices but IR not working yet on AOSP based ROMs yet.
Sent from my LG-D800 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Oh okay, I take it the reason it was working before is because then I was on LG's ROM not an AOSP rom? If this is case, would the backup I made of the LG ROM be of any use? I could pull out the quick remote app or something.
I don't know much about coding for android devices but I can still help. Let me know what I can do to get this project rolling again!
colwellkr said:
Oh okay, I take it the reason it was working before is because then I was on LG's ROM not an AOSP rom? If this is case, would the backup I made of the LG ROM be of any use? I could pull out the quick remote app or something.
I don't know much about coding for android devices but I can still help. Let me know what I can do to get this project rolling again!
Click to expand...
Click to collapse
The app is from the LG ROM... Going to have to debug more and see what's going on. You can use the Android SDK or app from play store to see logcat output and see where the errors are. I just don't have time to work on it right now...
Sent from my LG-V510 using XDA Premium HD app
AndroidUser00110001 said:
The app is from the LG ROM... Going to have to debug more and see what's going on. You can use the Android SDK or app from play store to see logcat output and see where the errors are. I just don't have time to work on it right now...
Sent from my LG-V510 using XDA Premium HD app
Click to expand...
Click to collapse
Okay, thanks. I don't know how to edit any code in these apps so I'll leave it people who do. In the mean time I'll search for solutions others may have found. Thanks and Happy Holidays!
Sent from my LG-V500 using XDA Premium HD app
@AndroidUser00110001 I really hope we can get this going, It's the only thing I miss from the LG Rom
joshuadjohnson22 said:
@AndroidUser00110001 I really hope we can get this going, It's the only thing I miss from the LG Rom
Click to expand...
Click to collapse
I no longer have v500, returned it and waiting for my v510 to get here. Hopefully we can figure something out that works on both models.
If you check in the G2 themes and apps forum there is a way to get QRemote working with AOSP ROMs and maybe the same method and/or files will work on G Pad.
Sent from my LG-D800 using XDA Premium 4 mobile app
AndroidUser00110001 said:
I no longer have v500, returned it and waiting for my v510 to get here. Hopefully we can figure something out that works on both models.
If you check in the G2 themes and apps forum there is a way to get QRemote working with AOSP ROMs and maybe the same method and/or files will work on G Pad.
Sent from my LG-D800 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
My friend got it working on his g2 by just download an apk, but trying to put that apk on a v500 (running cm11) unfortunately does not work.
I reckon you'd need a lot of LG framework in order to make this work on AOSP. I wont stop you tho, would be neat. ^^
I just bought (from Craigslist) a new still in plastic V10 two weeks ago. I came across this thread shortly afterwards, so I rooted my phone and froze a few Verizon apps last weekend. When I flashed the first time, I flashed the .tot file without flashing the .kdz file, which made my phone unable to receive texts. I had to factory reset, flash .kdz, then flash .tot. Root worked fine all week, and I used Titanium to freeze most of the Verizon apps. During the past week the second screen stopped working. I read in another forum post here on xda that it sometimes freezing those apps causes the second screen to stop working, and it takes a factory reset to get it working again. Today I did a factory reset, then flashed the .11b kdz file, the the .tot root file to do that all again. Everything was going fine, but somehow in the process I started downloading the Verizon update- MM I assume. I have pulled the battery numerous times to stop it, but every time I reboot it starts up again. It says the file size is 988MB. I can't get it to stop, and I cannot get my Windows 7 computer to see the phone now with LG Up (says there is no handset connected).
Is it possible to stop the update? It is at approximately 25% now. What can I do to get my computer to see it again?
Thanks for any help!
I have it fixed, thanks anyway.
biknut1 said:
I have it fixed, thanks anyway.
Click to expand...
Click to collapse
Im going to post the answer anyways.. Go to the playstore. Download link2to sd or ccleaner or any app that can freeze system files. Look for system updats. Freaze both of them and you are good to go
LASERWOLF452 said:
Im going to post the answer anyways.. Go to the playstore. Download link2to sd or ccleaner or any app that can freeze system files. Look for system updats. Freaze both of them and you are good to go
Click to expand...
Click to collapse
Since I wasn't sure what broke second screen I had unfrozen everything.
Btw Laserwolf, thanks for your video on requiring this phone. It made the process much easier being able see it done while doing it.
Sent from my VS990 using XDA-Developers mobile app
biknut1 said:
Since I wasn't sure what broke second screen I had unfrozen everything.
Btw Laserwolf, thanks for your video on requiring this phone. It made the process much easier being able see it done while doing it.
Sent from my VS990 using XDA-Developers mobile app
Click to expand...
Click to collapse
After studying this phone if u disabled the dqsl it will take down the second screen. Only way to fix it is to restore your phone by factory reset. If you uninstalled it. You might as well use the tot file
LASERWOLF452 said:
After studying this phone if u disabled the dqsl it will take down the second screen. Only way to fix it is to restore your phone by factory reset. If you uninstalled it. You might as well use the tot file
Click to expand...
Click to collapse
I'm not sure why second screen quit. But over the weekend I factory reset, then flashed. Kdz, then flashed. Tot. Back in bidness, just like was. Thanks!
Sent from my VS990 using XDA-Developers mobile app
biknut1 said:
I'm not sure why second screen quit. But over the weekend I factory reset, then flashed. Kdz, then flashed. Tot. Back in bidness, just like was. Thanks!
Sent from my VS990 using XDA-Developers mobile app
Click to expand...
Click to collapse
No problem. Also in the picture shown here don't disable that service shown in this pic. It will mess up quick memo. And if you did just enable it. If you want to debloat your phone and have a question feel free to ask. I debloated my v10 and get a 53,070 on mine. Cool thing when i debloated. I can charge my phone via usb 3.0 port and play games on it on high brightness and still keep it charged
53,070 is from the benchmark sorry i forgot to add that
I would like to debloat, I'd there a list of what can be frozen?
Sent from my VS990 using XDA-Developers mobile app
biknut1 said:
I would like to debloat, I'd there a list of what can be frozen?
Sent from my VS990 using XDA-Developers mobile app
Click to expand...
Click to collapse
I have to look to see what i uninstalled and frozen. I can give you a list of frozen apps for now. I post it later
here i made a video, hope this helps you out, enjoy
---------- Post added at 03:54 AM ---------- Previous post was at 03:53 AM ----------
biknut1 said:
I would like to debloat, I'd there a list of what can be frozen?
Sent from my VS990 using XDA-Developers mobile app
Click to expand...
Click to collapse
forgot to hit that reply button, lol but i got a video you should see it here. enjoy
LASERWOLF452 said:
I have to look to see what i uninstalled and frozen. I can give you a list of frozen apps for now. I post it later
Click to expand...
Click to collapse
That would be fabulous, thank you!
Sent from my VS990 using XDA-Developers mobile app
biknut1 said:
That would be fabulous, thank you!
Sent from my VS990 using XDA-Developers mobile app
Click to expand...
Click to collapse
you are welcome, hope the video helped you out
I wanted to post this because I search several times and never found any hits but randomly found this APK somewhere that works just fine activating Galaxy Labs on the AT&T model S7. Go to advanced features after install and you should see Galaxy labs. This allows you to disable the app drawer. So it is like an iPhone home screen expect you have widgets also! No root required.
Thanks for this. Quick Dial seems like it might be a useful feature.
Wow easy install and works great thank you!
Keep getting error app not installed
RileyIssKing said:
Keep getting error app not installed
Click to expand...
Click to collapse
You need to click the small text on the warning page that says "install anyway (unsafe)" Or something similar to that.
Clicking OK, is basically saying you don't want to proceed.
why did you manually sign it ?
maybe edited the apk ?
Weird why the sign it alerted system. Hmm
BTW it doesn't work on AT&T Android 7.0
Sent from my SAMSUNG-SM-G930A using Tapatalk
Omar04 said:
Weird why the sign it alerted system. Hmm
BTW it doesn't work on AT&T Android 7.0
Sent from my SAMSUNG-SM-G930A using Tapatalk
Click to expand...
Click to collapse
It works if you had it on mm then updated through ota
Sent from my SAMSUNG-SM-G935A using XDA-Developers Legacy app