{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Htc 526G Plus Stock Rom working with unlock bootloader image
Flashing Instruction
1) Flash without battery
2) Select scatter file don't change anything after it select automatically
3) Make sure download-agent is MTK_AllInOne_DA.bin
4) click on download button of sp tool
5) Press & Hold volume (+, -) of the device
6) Connect USB cable to device holding with volume keys (+, -)
7) Wait till flashing starts
8) After completing flash Disconnect the device put the battery & turn it ON
Hope It Work For All Of You
INSTRUCTIONS For Those Having Error with Going Back To Stock
Errors are like 6045, 4032 etc
1) Flash with battery
2) Select scatter file don't change anything after it select automatically
3) Make sure download-agent is MTK_AllInOne_DA.bin
4) Select Firmware upgrade in download section
5) click on download button of sp tool
6) Press & Hold volume (+, -) of the device
7) Connect USB cable to device holding with volume keys (+, -)
8) Wait till flashing starts
9) After completing flash Disconnect the device remove & put the battery & turn it ON
Download link
https://drive.google.com/file/d/0B7hRDjaucwTaelZOc191UmZjc2M/view
Dont Forget to Hit Thanks Button
when i did it without battery it alwasys shows some error. and when i did it with battery.. then da 100% after that download bootloader 100% then some error usb disabled.. plz help my phone is having lots of stuff niether your rom is signing up with google nor i am able to go back to stock plzz... i beg u atlaest make me return to stock.. i didnt made any backup..... ppllz lzz plzz.......
smarty.utkarsh20 said:
when i did it without battery it alwasys shows some error. and when i did it with battery.. then da 100% after that download bootloader 100% then some error usb disabled.. plz help my phone is having lots of stuff niether your rom is signing up with google nor i am able to go back to stock plzz... i beg u atlaest make me return to stock.. i didnt made any backup..... ppllz lzz plzz.......
Click to expand...
Click to collapse
you are doing something wrong when installing rom that's why u have faced error in signing google.
Now u can do only two things if u haven't wiped data
1) Install Resurrection Remix 5.7.4 then insert Sdcard in device & take backup from internal storage
2) U can take backup of Internal Storage from TWRP
goto Advanced> File Manager
copy IMP Stuff to Sdcard
Lollipop version is stable version you can try with that if u want
salman986 said:
you are doing something wrong when installing rom that's why u have faced error in signing google.
Now u can do only two things if u haven't wiped data
1) Install Resurrection Remix 5.7.4 then insert Sdcard in device & take backup from internal storage
2) U can take backup of Internal Storage from TWRP
goto Advanced> File Manager
copy IMP Stuff to Sdcard
Lollipop version is stable version you can try with that if u want
Click to expand...
Click to collapse
Bro, I just want to go back to stock rom please help me...as i have read the comments and some of them are also facing the gapps issue in that rom also... so when i am trying to flash stock this is happening:-
when i conect usb without battery ... it says error.. BROM ERROR(4001) DA didnt send response data to flashtool
and when i do the same thing with inserted battery first it says DA 100% then Bootloader 100% then it shows error BROM ERROR S_SECURITY_SECURE_USB_DL_DISABLED(6041) MSP ERROR CODE 0x00.. plzz bro do something.... plzz plzz plzzz ..... i beg u bro..... plzzz
Plzz Bro Help... trust me i am crying ... i tried ur lollipop rom even same thing error communicating google servers... plzz bro how to return stock.. DO help me.... can u give me twrp 2.8.5 so that i can flash the .img files of ur stock through it as sp flash tool is showing error.. plzz bro i beg u.... plzz plzz reply soon... even fastboot is connected but when i am giving commands it also shows some error..... like error wirte..
smarty.utkarsh20 said:
Plzz Bro Help... trust me i am crying ... i tried ur lollipop rom even same thing error communicating google servers... plzz bro how to return stock.. DO help me.... can u give me twrp 2.8.5 so that i can flash the .img files of ur stock through it as sp flash tool is showing error.. plzz bro i beg u.... plzz plzz reply soon... even fastboot is connected but when i am giving commands it also shows some error..... like error wirte..
Click to expand...
Click to collapse
I have given you my Number
See PM
It worked
salman986 said:
I have given you my Number
See PM
Click to expand...
Click to collapse
Thnx Bro, for ur support... this works it was some issue with my pc drivers...
Mod Edit
Thread re-opened
malybru
Senior Moderator
My desire 526g+ is brickedI m trying to flash stock rom with sp flash tool but my devices connects and then disconnects and tool says failed to download DA To internal chipset please help me I will be greatly thankfully to you ......
is this mtk 6582 rom stock
Error 4001
When iam flashing with battery & without battery it is showing error 4001 after completing download da 100%.
I don't know what to do now.....:crying::crying::crying:.... So please tell me the solution to this error................ Please PLease...........................................................
After installing this ROM successfully it is saying invalid imei ... Please help me to fix this.
stuck on bootloop plz help.
Htc 526G Plus Stock Rom working with unlock bootloader image
Flashing Instruction
1) Flash without battery
2) Select scatter file don't change anything after it select automatically
3) Make sure download-agent is MTK_AllInOne_DA.bin
4) click on download button of sp tool
5) Press & Hold volume (+, -) of the device
6) Connect USB cable to device holding with volume keys (+, -)
7) Wait till flashing starts
8) After completing flash Disconnect the device put the battery & turn it ON
Hope It Work For All Of You
INSTRUCTIONS For Those Having Error with Going Back To Stock
Errors are like 6045, 4032 etc
1) Flash with battery
2) Select scatter file don't change anything after it select automatically
3) Make sure download-agent is MTK_AllInOne_DA.bin
4) Select Firmware upgrade in download section
5) click on download button of sp tool
6) Press & Hold volume (+, -) of the device
7) Connect USB cable to device holding with volume keys (+, -)
8) Wait till flashing starts
9) After completing flash Disconnect the device remove & put the battery & turn it ON
i tried ur instructions as they are listed(without battery). but only download DA completes and nothing further happpens. also my laptop is not able recognize my device (HTC Desire 526g dual sim). plz help
Not Working
Everytime its show error :crying::crying:
---------- Post added at 04:34 AM ---------- Previous post was at 04:32 AM ----------
naveen686 said:
After installing this ROM successfully it is saying invalid imei ... Please help me to fix this.
Click to expand...
Click to collapse
how did you done to install rom , how do u unlock bootloader ?.
same prob
same problem with me can i have solution too?? am too tired doing countless efforts,,
---------- Post added at 03:38 PM ---------- Previous post was at 03:35 PM ----------
smarty.utkarsh20 said:
Thnx Bro, for ur support... this works it was some issue with my pc drivers...
Click to expand...
Click to collapse
same problem with me can i have solution too?? am too tired doing countless efforts,,
there is not sp flash tool in given links only bootloader what can i do please help me ? ?????? help
Htc desie526+
When i flash my htc desire 526g plus its completely flashed but my phone does not access sim network please help me
Im getting this Broom error.
S_SECURITY_SECURE_USB_DL_IMAGE_HASH_FAIL (6047).
ERROR CODE: 0x00
---------- Post added at 11:10 AM ---------- Previous post was at 11:08 AM ----------
smarty.utkarsh20 said:
Bro, I just want to go back to stock rom please help me...as i have read the comments and some of them are also facing the gapps issue in that rom also... so when i am trying to flash stock this is happening:-
when i conect usb without battery ... it says error.. BROM ERROR(4001) DA didnt send response data to flashtool
and when i do the same thing with inserted battery first it says DA 100% then Bootloader 100% then it shows error BROM ERROR S_SECURITY_SECURE_USB_DL_DISABLED(6041) MSP ERROR CODE 0x00.. plzz bro do something.... plzz plzz plzzz ..... i beg u bro..... plzzz
Click to expand...
Click to collapse
How to solve this S_SECURITY_SECURE_USB_DL_IMAGE_HASH_FAIL (6047).
ERROR CODE: 0x00
Error ?
I too facing error with my htc desire 526g+
WHEN FLASHING GETTING ERROR AS: s_security_secure_usb_dl_image_hash_fail
Please help , what I need to do now?
---------- Post added at 10:44 AM ---------- Previous post was at 10:40 AM ----------
BenShaji said:
Im getting this Broom error.
S_SECURITY_SECURE_USB_DL_IMAGE_HASH_FAIL (6047).
ERROR CODE: 0x00
---------- Post added at 11:10 AM ---------- Previous post was at 11:08 AM ----------
How to solve this S_SECURITY_SECURE_USB_DL_IMAGE_HASH_FAIL (6047).
ERROR CODE: 0x00
Error ?
Click to expand...
Click to collapse
not able to flash , saying above as same, using sp flash tool v5.1516
I have flashed my htc 526 g+ dual sim. All the things are done peacefully but when i trying to on my phone it still in the boot loop. I have downloaded my stock rom from original site of htc. Plzz helpp me!!!
Related
I have root dell venue 2.3.3
download system.img
406
115.com/file/dn3dfplj
venue233.rar
408
115.com/file/aqoa9e6q#
system233菜单汉化.rar
408 add china language
1:install updata.pkg for 2.3.3
2:use fastboot mode flash system.img
reboot your phone
OK ,your phone root Successfully
Add RootExplorer.apk Superuser.apk
Really?
Sent from my Dell Venue using XDA App
Oh! That really seems.
Someone in the forum, attending is a screenshot taken by direct experiment.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
@liu: you rock! Could you please tell us how did you do that? Btw, could you please consider hosting your result in another place? I tried many times today, but still cannot get what you shown there!
I figured out which link/area of the Chinese page to click (tried them all) and was able to download the venue 2.3.3 .img file.
Here's a link to the file I uploaded: http://www.mediafire.com/?hbag5amdukmxl2h
---------- Post added at 09:35 PM ---------- Previous post was at 08:52 PM ----------
hwon123 said:
Someone in the forum, attending is a screenshot taken by direct experiment.
View attachment 788887
View attachment 788888
View attachment 788889
Click to expand...
Click to collapse
@hwon,
Did you actually try that and these are your attached files? I'm not sure what you meant but I understand English is not your native language so it is not a problem at all Just trying to clarify.
root way
1: unpack updata.pkg
2: unpack root.img
3: root kernel
4: repack root.img
5: flash root.img
5: reboot phone
ok ,ROOT Successful
@liuhui: it's cool! I tried to use your system.img and it works. Could you please tell me the detail (e.g. use which tool to unpack .pkg file, then perform which modification. I think your details will be good for all of us here). Thank you!
Luihui, congrats!
Sent from my Dell Streak using XDA App
Will this really work? Sorry newbie here.
streak4m3 said:
I figured out which link/area of the Chinese page to click (tried them all) and was able to download the venue 2.3.3 .img file.
Here's a link to the file I uploaded: http://www.mediafire.com/?hbag5amdukmxl2h
---------- Post added at 09:35 PM ---------- Previous post was at 08:52 PM ----------
@hwon,
Did you actually try that and these are your attached files? I'm not sure what you meant but I understand English is not your native language so it is not a problem at all Just trying to clarify.
Click to expand...
Click to collapse
1st picture means 'Change system Font'
2nd picture means 'Created superuser'
3rd picture means 'Rootexplorer 'Mount R / O' button is activated.'
The above three preconditions 'root' should be.
works great!
we should make this thread a sticky!
it's in chinese?
r0b1n84 said:
it's in chinese?
Click to expand...
Click to collapse
I uploaded the file for English speakers here: http://www.mediafire.com/?hbag5amdukmxl2h
ok, after some experimenting I found the following. You only need to flash recovery.img fron Update 319 then boo into recovery, upgrade update.pkg (406 on sd card), on reboot boot into flash mode and flash system.img(venue233.img) make sure to rename the 233 image file to system.img or write fail error will occur when flashing. cheers!
ckicky:
319 recovery.img
Steps for newbies
Hi Omnichron, would you mind specify the steps involved for newbies:
(1) Flash recovery.img from Update 319, how? via PC with what software? or just on SD card?
(2) Reboot into recovery mode, how to do that?
(3) Upgrade update.pkg (406 on sd card), with my HK rom, it declines to process update.pkg because of language conflict with Korean :-(
(4) Reboot into flash mode and flash system.img (venue233.img), I suppose this is the same as (1) but how?
Thanks very much!
R
You can't use the phone since it can only load update.pkg when in recovery mode.
You need to use a tool called fastboot to load the other files (recovery.img).
Than turn off phone, than turn on phone but turn on mute and hold the vol down button and you'll be in a special boot menu where you can load upgrade.pkg
The last step you are correct, same method as first, use fastboot to load the file onto the phone.
I'm trying to duplicate Omnichron's steps, but my PC doesn't detect the phone with fastboot, only ADB detects the phone. I can't find any drivers for fastboot for Dell Venue that actually works...
royoni said:
Hi Omnichron, would you mind specify the steps involved for newbies:
(1) Flash recovery.img from Update 319, how? via PC with what software? or just on SD card?
(2) Reboot into recovery mode, how to do that?
(3) Upgrade update.pkg (406 on sd card), with my HK rom, it declines to process update.pkg because of language conflict with Korean :-(
(4) Reboot into flash mode and flash system.img (venue233.img), I suppose this is the same as (1) but how?
Thanks very much!
R
Click to expand...
Click to collapse
i'm still confuse about how to update, please give step by step, and what software we need to do that. really thanx for the hep
r0b1n84 said:
i'm still confuse about how to update, please give step by step, and what software we need to do that. really thanx for the hep
Click to expand...
Click to collapse
This will help you, check it out: http://forum.xda-developers.com/showthread.php?t=1219566
---------- Post added at 12:39 PM ---------- Previous post was at 12:37 PM ----------
webdoctors said:
I'm trying to duplicate Omnichron's steps, but my PC doesn't detect the phone with fastboot, only ADB detects the phone. I can't find any drivers for fastboot for Dell Venue that actually works...
Click to expand...
Click to collapse
This will help you, it works for me: ftp://ftp.dell.com/handheld/R291096.exe
How to get into fastboot?
Hi all,
I found this picture online but not sure if this is the fastboot menu? How can I get there and what is the next step? Which option is the fastboot?
[05] SD download confirms to brick the phone
Thanks!
I think there are two menus. The one with the picture above and another one that you need to use to flash the recovery and system images. Here are steps:
1. Turn the "Mute" switch to "On" (you will see red).
2. Turn off the phone.
3. Turn it back on and at the same time hold the "Volume down" button. You will see a single line saying something about fastboot mode.
4. Now, connect your Venue to your PC via USB cable. On the Venue screen it will say something like " fastboot connected".
5. At that point you can start flashing.
~~~~~~~~~~~~~~~~~~~~~~~~
6. After you flashed the recovery and rebooted your phone (via fastboot command), you need to disconnect the USB cable from your PC.
7. As soon as you see the Dell logo you need to press and hold both volume buttons (Up and Down). This will take you to a new screen prompt which gives you three lines: one for factory reset, another for sd card update and I cant remember the third one (maybe calibration).
8. Choose the "sd card update" by pressing the camera button and you will see a new screen prompt with blue letters.
9. At this point you need to press the camera button again and the update will start (it will take some time).
10. Once the update is installed your phone will reboot and you need make sure your "mute" button is still on (you will see red) and press and hold the "volume down" button as soon as you see the Dell logo. You will see the familiar single line that says something about fastboot USB mode.
11. Now connect your phone via USB cable back to the PC and it will change the status on the Venue to "fastboot connected".
12. Now you can flash the system image. After the flashing is done, you would need to enter a fastboot reboot command and the phone will reboot and factory reset on it's own.
And that should be it.
If you need help flashing, let me know and I will type up the steps too.
P.S. The option that royoni illustrated via the image in his post WILL BRICK your phone. He warns you and I will too. I have done it and had to send it back to Dell.
Hope this helps
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Power off the phone .
Press vol down and power button and it will boot into boot loader
Connect the USB cable .
Go to ed300's post and download the twrp recovery for lollipop and KitKat.
If the base ROM on which u have flashed the new ROM was KitKat use the KitKat twrp.
Else use the lollipop twrp.
Extract the required zip file.
After connecting the USB , click on the file named Flash . after its completed click on Boot file .after that's also done again click the Flash file .
After that it will show (waiting for device )
And the phone will boot to the recovery mode and u can flash the ED300's ROM I prefer CM12.1
Good luck.
bro Iam getting waiting for device now itself but Iam not able to move any furthur after that . It is just showing "waiting for device "
bvsbrk said:
bro Iam getting waiting for device now itself but Iam not able to move any furthur after that . It is just showing "waiting for device "
Click to expand...
Click to collapse
Did u follow as I mentioned?
Which was the base rom on which u flashed CM
Its lollipop and I followed steps exactly as you mentioned . I replaced the recovery of adb and fastboot folder with the recovery you suggested . But the thing is fastboot driver which was gone after flashing cm.
bvsbrk said:
Its lollipop and I followed steps exactly as you mentioned . I replaced the recovery of adb and fastboot folder with the recovery you suggested . But the thing is fastboot driver which was gone after flashing cm.
Click to expand...
Click to collapse
Replaced? I didn't get that.
Just download this https://userscloud.com/a25aszfwkn2z
Put the phone to fastboot by pressing vol down and power .
Connect the USB to phone . Unzip the file mentioned above. Open the file.
Double click on flash.bat then after that's done , boot.dat after that's also done then flash.bat and ur phone will boot to recovery.
aravindmj said:
Replaced? I didn't get that.
Just download this https://userscloud.com/a25aszfwkn2z
Put the phone to fastboot by pressing vol down and power .
Connect the USB to phone . Unzip the file mentioned above. Open the file.
Double click on flash.bat then after that's done , boot.dat after that's also done then flash.bat and ur phone will boot to recovery.
Click to expand...
Click to collapse
The link is downloading a file which is invalid. I cant open the zip file that you asked to download from the zip file . Pls send some other link
bvsbrk said:
The link is downloading a file which is invalid. I cant open the zip file that you asked to download from the zip file . Pls send some other link
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B3yAzE4FH2e7RkNQbUk2b0g1T0E/view?usp=drivesdk
aravindmj said:
https://drive.google.com/file/d/0B3yAzE4FH2e7RkNQbUk2b0g1T0E/view?usp=drivesdk
Click to expand...
Click to collapse
that is not working every command window stopped at "waiting for device" anyway thanks a lot
bvsbrk said:
that is not working every command window stopped at "waiting for device" anyway thanks a lot
Click to expand...
Click to collapse
Try this https://drive.google.com/file/d/0B3yAzE4FH2e7RkNQbUk2b0g1T0E/view?usp=drivesdk
aravindmj said:
Try this https://drive.google.com/file/d/0B3yAzE4FH2e7RkNQbUk2b0g1T0E/view?usp=drivesdk
Click to expand...
Click to collapse
This I had tried already as you posted it before. Some one said my device data is completely lost while I flashed cm.
bvsbrk said:
This I had tried already as you posted it before. Some one said my device data is completely lost while I flashed cm.
Click to expand...
Click to collapse
Sorry the link was wrong try this it's a different one https://drive.google.com/file/d/0B3yAzE4FH2e7RU5helVWd0dBUGM/view?usp=drivesdk
App data excluding what's app will be lost but the data in the internal storage will.be present.
aravindmj said:
Sorry the link was wrong try this it's a different one https://drive.google.com/file/d/0B3yAzE4FH2e7RU5helVWd0dBUGM/view?usp=drivesdk
App data excluding what's app will be lost but the data in the internal storage will.be present.
Click to expand...
Click to collapse
Same thing bro the problem is something related to fastboot drivers which were gone from my phone
It worked for me . Can you send me a link where i can find CM12.1
Mahesh0001 said:
It worked for me . Can you send me a link where i can find CM12.1
Click to expand...
Click to collapse
https://forum.xda-developers.com/le...t-cm12-1-rom-lenovo-a6000-plus-withe-t3288805
My phone went into bootloop , i was using ResurrectionRemix 5.8.3 , i cant go into recovery mode. but can start bootloader.
I have installed Minimal fastboot , its showing no devices found when used "adb devices"
But shows the devices for command "fastboot devices"
I also tried flashing twrp.img using "fastboot flash recovery twrp.img"
But still phone not starting just stuck on looping the startup..Please helpppp
i get error when i hit flash.bat that device not found but it write the img file
What should i do?
My Lenovo A6000 Kitkat 4.4 struck on logo after phone switched off after hang. Phone when switched lenovo logo comes with display down saying press power button long for fastboot but does not enter fastboot. Whenever i press power button it says the same press power button long for fastboot but does not enter fastboot. nothing works I guess the OS crashed tried to enter into boot menu using volume +- powerbutton nothing works tried different combination nothing works.
i have downloaded kitkat 4.4 stock ROM but dont know how to flash and install using pc. If anyone knows how then let me know.
johnwell4u said:
My Lenovo A6000 Kitkat 4.4 struck on logo after phone switched off after hang. Phone when switched lenovo logo comes with display down saying press power button long for fastboot but does not enter fastboot. Whenever i press power button it says the same press power button long for fastboot but does not enter fastboot. nothing works I guess the OS crashed tried to enter into boot menu using volume +- powerbutton nothing works tried different combination nothing works.
i have downloaded kitkat 4.4 stock ROM but dont know how to flash and install using pc. If anyone knows how then let me know.
Click to expand...
Click to collapse
Flashing via phone is easy.
Just go to recovery wipe entire thing and then flash.
Mahesh0001 said:
i get error when i hit flash.bat that device not found but it write the img file
What should i do?
Click to expand...
Click to collapse
Make sure to use the recovery based on the rom that you where on before this thing happened.
And try executing the boot.bat file also. Do it simultaneously
aravindmj said:
Replaced? I didn't get that.
Just download this https://userscloud.com/a25aszfwkn2z
Put the phone to fastboot by pressing vol down and power .
Connect the USB to phone . Unzip the file mentioned above. Open the file.
Double click on flash.bat then after that's done , boot.dat after that's also done then flash.bat and ur phone will boot to recovery.
Click to expand...
Click to collapse
worked for me to open recovery again.. i am now trying to reflash MIUI8 android 5.1.1.:good::good::good:
HELLO FRIENDS...
Many friend have face this problems i.e no recovery,no splash screen,no system only just a small vibration this is know as Hard-Brick..
This method will 100% works for both Lenovo a6000 and plus...
for this we need the following things....
Firmware-File
QPST Tool
and well working computer or Laptop..
Thing want to know before starting...
We will not use QPST tool for flashing this is optional. After installing QPST tool the error face by most computer will be fixed error like MSVCP100.dll error mostly this problem is face by 64bit OS..If you have installed 64bit try it if it's works then good if not then use your friend's PC which have 32bit OS or install 32bit OS
We will use flash tool which already given in Firmware zip.
Let's Start...:laugh:
After downloading the firmware You'll get firmware folder and Qualcomm Flash Tool and most important drivers folder there will be more files but no use of those file.
STEP 1.First extract this above 3 file in a folder where you want...then click on driver folder and then click on Qualcomm_USB_Driver_Setup.exe......setup will start...select the first option(WWWAN.DHCP........) and then next...further you can do.. while installation if a pop-up comes click on yes(all ways click on yes) after completion of driver installation please reboot or restart you are pc or laptop ..:good:
STEP 2...click on Qualcomm Flash Tool->QcomDLoader.exe if it start then good....and if there is an error like MSVCP100.dll not found or something else
then install QPST tool and run it. After opening it now close it.....Now again click on QcomDLoader.exe this time it will work:good:
then click on Load button(the first icon of the tool) then browse the firmware folder where u have extracted...then click on start(the 3 icon of the flash tool)
STEP 3:..Now remove Your sim card and memory card(if u don't have this then also remove your battery and then put it again)...
Now hold volume+ and volume - button(do not touch power button) and plug in vie usb... the flash will automatically start....
wait till it complete...after finish it will show finish in green color...then unplug the phone and hold power button to start...
This method is same for Lenovo a6000 plus the only different will be....it will show 1GB ram and 8GB internal storage
To fix this install any custom rom..,:good:
This method is tasted by me and it work for me I have Lenovo a6000 plus that's why I am sharing this with you all....
NOTE:-after coming back to KitKat you may face the problem of boot loop for 7.x.x rom or some feature of the rom may not work..to overcome this problem follow this
download this twrp KitKat version(not so important) you can use cwm(not tested) and direct flash the lollipop rom which contain system.img file in it eg. vibe 2.5(tested and works) ,color os 3.1 or any rom which contain system.img and reboot.:good:
do not use any pach file for upgrading to lollipop do direct flash lollipop rom.
I hope this will also work for you...
if this post help's you plz donate me on paytm...no 9763697739
if any problem occurs then please let me know..
Screen Short
This is my phone info after flashing it.....
this is not Lenovo a6000 this SS in of Lenovo a6000 plus
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This after flashing custom Rom
soan0 said:
HELLO FRIENDS...
Many friend have face this problems i.e no recovery,no splash screen,no system only just a small vibration this is know as Hard-Brick..
This method will 100% works for both Lenovo a6000 and plus...
for this we need the following things....
Firmware-File(this is stock rom is for Lenovo a6000 but can be use for Lenovo a6000+)
QPST Tool
and well working computer or Laptop..
Thing want to know before starting...
We will not use QPST tool for flashing this is optional. After installing QPST tool the error face by most computer will be fixed error like MSVCP100.dll error mostly this problem is face by 64bit OS..If you have installed 64bit try it if it's works then good if not then use your friend's PC which have 32bit OS or install 32bit OS
We will use flash tool which already given in Firmware zip.
Let's Start...:laugh:
After downloading the firmware You'll get firmware folder and Qualcomm Flash Tool and most important drivers folder there will be more files but no use of those file.
STEP 1.First extract this above 3 file in a folder where you want...then click on driver folder and then click on Qualcomm_USB_Driver_Setup.exe......setup will start...select the first option(WWWAN.DHCP........) and then next...further you can do.. while installation if a pop-up comes click on yes(all ways click on yes) after completion of driver installation please reboot or restart you are pc or laptop ..:good:
STEP 2...click on Qualcomm Flash Tool->QcomDLoader.exe if it start then good....and if there is an error like MSVCP100.dll not found or something else
then install QPST tool and run it. After opening it now close it.....Now again click on QcomDLoader.exe this time it will work:good:
then click on Load button(the first icon of the tool) then browse the firmware folder where u have extracted...then click on start(the 3 icon of the flash tool)
STEP 3:..Now remove Your sim card and memory card(if u don't have this then also remove your battery and then put it again)...
Now hold volume+ and volume - button(do not touch power button) and plug in vie usb... the flash will automatically start....
wait till it complete...after finish it will show finish in green color...then unplug the phone and hold power button to start...
This method is same for Lenovo a6000 plus the only different will be....it will show 1GB ram and 8GB internal storage
To fix this install any custom rom..,:good:
This method is tasted by me and it work for me I have Lenovo a6000 plus that's why I am sharing this with you all....
I hope this will also work for you...
if any problem occurs then please let me know..
Click to expand...
Click to collapse
For some people who dont get their phones detected need to open their motherboard and short the two points located beside memory card slot
The Hard Gamer said:
For some people who dont get their phones detected need to open their motherboard and short the two points located beside memory card slot
Click to expand...
Click to collapse
It can be told better with an image, if you can manage :-B
sasukay said:
It can be told better with an image, if you can manage :-B
Click to expand...
Click to collapse
Ok i wil try to find it
nice method thank you for sharing this will help many peoples....
MR.HACKER5476 said:
nice method thank you for sharing this will help many peoples....
Click to expand...
Click to collapse
yes bro i know how it feel when phone get brick...
The phone boots shows logo restarting and it keeps on restarting
chriselanko said:
The phone boots shows logo restarting and it keeps on restarting
Click to expand...
Click to collapse
install any custom rom or do factor reset
if you have done this above but still have the problem then answer my question
u r currently instead rom android version ?
is custom recovery is flashed?
do u have used any patch zip to upgrade or downgrade the android version ?
soan0 said:
install any custom rom or do factor reset
if you have done this above but still have the problem then answer my question
u r currently instead rom android version ?
is custom recovery is flashed?
do u have used any patch zip to upgrade or downgrade the android version ?
Click to expand...
Click to collapse
I am not able to acess recovery mode.
can enter fastboot but not recovery.
I have also attached the screenshot of final status while flashing.
I followed all steps .
bro its taking too much time what to do its tooked about 11 min and still okeep going
soan0 said:
HELLO FRIENDS...
Many friend have face this problems i.e no recovery,no splash screen,no system only just a small vibration this is know as Hard-Brick..
This method will 100% works for both Lenovo a6000 and plus...
for this we need the following things....
Firmware-File(this is stock rom is for Lenovo a6000 but can be use for Lenovo a6000+)
QPST Tool
and well working computer or Laptop..
Thing want to know before starting...
We will not use QPST tool for flashing this is optional. After installing QPST tool the error face by most computer will be fixed error like MSVCP100.dll error mostly this problem is face by 64bit OS..If you have installed 64bit try it if it's works then good if not then use your friend's PC which have 32bit OS or install 32bit OS
We will use flash tool which already given in Firmware zip.
Let's Start...:laugh:
After downloading the firmware You'll get firmware folder and Qualcomm Flash Tool and most important drivers folder there will be more files but no use of those file.
STEP 1.First extract this above 3 file in a folder where you want...then click on driver folder and then click on Qualcomm_USB_Driver_Setup.exe......setup will start...select the first option(WWWAN.DHCP........) and then next...further you can do.. while installation if a pop-up comes click on yes(all ways click on yes) after completion of driver installation please reboot or restart you are pc or laptop ..:good:
STEP 2...click on Qualcomm Flash Tool->QcomDLoader.exe if it start then good....and if there is an error like MSVCP100.dll not found or something else
then install QPST tool and run it. After opening it now close it.....Now again click on QcomDLoader.exe this time it will work:good:
then click on Load button(the first icon of the tool) then browse the firmware folder where u have extracted...then click on start(the 3 icon of the flash tool)
STEP 3:..Now remove Your sim card and memory card(if u don't have this then also remove your battery and then put it again)...
Now hold volume+ and volume - button(do not touch power button) and plug in vie usb... the flash will automatically start....
wait till it complete...after finish it will show finish in green color...then unplug the phone and hold power button to start...
This method is same for Lenovo a6000 plus the only different will be....it will show 1GB ram and 8GB internal storage
To fix this install any custom rom..,:good:
This method is tasted by me and it work for me I have Lenovo a6000 plus that's why I am sharing this with you all....
NOTE:-after coming back to KitKat you may face the problem of boot loop for 7.x.x rom or some feature of the rom may not work..to overcome this problem follow this
download this twrp KitKat version(not so important) you can use cwm(not tested) and direct flash the lollipop rom which contain system.img file in it eg. vibe 2.5(tested and works) ,color os 3.1 or any rom which contain system.img and reboot.:good:
do not use any pach file for upgrading to lollipop do direct flash lollipop rom.
I hope this will also work for you...
if any problem occurs then please let me know..
Click to expand...
Click to collapse
its taking too much time and keep going what to doo
shivanshusuraj said:
its taking too much time and keep going what to doo
Click to expand...
Click to collapse
which buttons u have pressed at the start
bro turn off u r phone then remove u r sim and memory card (not necessary) then press and hold volume + and volume - (don't touch power button )together till u feel a soft vibration then only connect to u r pc
yes i remover all things no sim no memory and i hode both volume key then plug usb
soan0 said:
which buttons u have pressed at the start
bro turn off u r phone then remove u r sim and memory card (not necessary) then press and hold volume + and volume - (don't touch power button )together till u feel a soft vibration then only connect to u r pc
Click to expand...
Click to collapse
yes i remover all things no sim no memory and i hode both volume key then plug usb and then it vibrate and connected but its took 23 min but not done then i remover usb directly
chriselanko said:
I am not able to acess recovery mode.
can enter fastboot but not recovery.
I have also attached the screenshot of final status while flashing.
I followed all steps .
Click to expand...
Click to collapse
bro now u can flash custom recovery i.e TWRP,CWM as par u r android version
i think u know that how to do ..if not then plz check how to flash twrp or cwm in Lenovo a6000
shivanshusuraj said:
yes i remover all things no sim no memory and i hode both volume key then plug usb and then it vibrate and connected but its took 23 min but not done then i remover usb directly
Click to expand...
Click to collapse
u r drivers are install properly plz check which phone do u have
if u have serious problem then whatsapp me 9763697739
shivanshusuraj said:
yes i remover all things no sim no memory and i hode both volume key then plug usb and then it vibrate and connected but its took 23 min but not done then i remover usb directly
Click to expand...
Click to collapse
if it possible to format u r pc then do it and again do all the step if not then try this hole guide in u r friend pc
Still Bootlooping / no recovery
soan0 said:
bro now u can flash custom recovery i.e TWRP,CWM as par u r android version
i think u know that how to do ..if not then plz check how to flash twrp or cwm in Lenovo a6000
Click to expand...
Click to collapse
1) Flashed Sucessfully the given frimware using the tool in the folder.
2) Phone still in boot loop.
3) Tried to flash Twrp image you mentioned in this thread, it flashed sucessfully but cannot able to acess recovery by hardware button combinations or by any means.
4)Tried Flashing Vibe 2.5 Lollipop ROM using fastboot ( using command fastboot update E:\vibe.zip ). It showing errors like
" archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
"
5) Please help me with this and tell me where was I wrong. Am not a PRO, just a beginner So please give detailed instructions if am wrong. Thank you @soan0
chriselanko said:
1) Flashed Sucessfully the given frimware using the tool in the folder.
2) Phone still in boot loop.
3) Tried to flash Twrp image you mentioned in this thread, it flashed sucessfully but cannot able to acess recovery by hardware button combinations or by any means.
4)Tried Flashing Vibe 2.5 Lollipop ROM using fastboot ( using command fastboot update E:\vibe.zip ). It showing errors like
" archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
"
5) Please help me with this and tell me where was I wrong. Am not a PRO, just a beginner So please give detailed instructions if am wrong. Thank you @soan0
Click to expand...
Click to collapse
Bro after flashing wait for few min it take time to boot up
And try to flash vibeui 2.5 by twrp which i have given the link if still have a problem then whatsapp me or call so that i can understand u r problem correctly
9763697739
soan0 said:
Bro after flashing wait for few min it take time to boot up
And try to flash vibeui 2.5 by twrp which i have given the link if still have a problem then whatsapp me or call so that i can understand u r problem correctly
9763697739
Click to expand...
Click to collapse
After flashing , i just power on the device and left it. it just keeps on restarting. (ie what i mentioned as boot loop).
I cannot acess TWRP then how can i flash vibe 2.5 using it.
Sry I didnt get you, I send the video of the phone in your whatsapp number.
even using " fastboot boot twrp.img" command it is showing sucessful in cmd promt but while device keeps restarting
chriselanko said:
I am not able to acess recovery mode.
can enter fastboot but not recovery.
I have also attached the screenshot of final status while flashing.
I followed all steps .
Click to expand...
Click to collapse
If you can't enter recovery your simplest method would be flashing recovery through fastboot mode..
Hello, I have a redmi note 3 SE (Kate) and its stock.
A few days ago the device randomly restarted and its bootlooping, instead of the recovery mode the device its showing me a picture of the phone and a usb cable. I can only access fastboot mode, what (and how) can I do something about it?
Thank you in advance
Teo128 said:
Hello, I have a redmi note 3 SE (Kate) and its stock.
A few days ago the device randomly restarted and its bootlooping, instead of the recovery mode the device its showing me a picture of the phone and a usb cable. I can only access fastboot mode, what (and how) can I do something about it?
Thank you in advance
Click to expand...
Click to collapse
If u cant boot into miui. Then u need to factory reset in recovery.
Hold power + vol up
and release as soon when mi logo vibrates.u will be in recovery mode.
Choose wipe data and cache. Reboot.
naik2902 said:
If u cant boot into miui. Then u need to factory reset in recovery.
Hold power + vol up
and release as soon when mi logo vibrates.u will be in recovery mode.
Choose wipe data and cache. Reboot.
Click to expand...
Click to collapse
Recovery mode doesn't work, it shows this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Teo128 said:
Recovery mode doesn't
work, it shows this
Click to expand...
Click to collapse
If u cant boot into miui then download mi pc suite on computer and install.
Connnect phone to pc in same recovery mode shown by your picture.
And connect internet and download rom and flash. If there is option to factory reset then u use it.
Or
Download fastboot tgz rom .
Put ur device in edl mode.
And flash using miflash tool
Select clean flash all option during flash
Thanks
On windows 10
I downloaded the PC suite and installed the redmi note 3 windows drivers, the computer detect it correctly as "Redmi note 3" and the phone display the USB cable as conneted but the MI pc suite doesn't detect the device :crying:
Teo128 said:
Thanks
On windows 10
I downloaded the PC suite and installed the redmi note 3 windows drivers, the computer detect it correctly as "Redmi note 3" and the phone display the USB cable as conneted but the MI pc suite doesn't detect the device :crying:
Click to expand...
Click to collapse
Use edl mode method.
Mi pc suite already has usb drivers. No need to install drivers twice.
Remove other drivers and check.
Or
Put device in fastboot mode. Vol down +power
Connect to pc
Use this fastboot command in cmd.
fastboot devices
If serial number of device appeaered then ur device is detected.
Ur device is locked. Now put device from fastboot mode to Edl mode. And flash fastboot rom using mi flash. Select " clean all" option.
How to put in edl mode. .? Follow this guide to put in edl mode.
https://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718
Download kate rom and mi flash tool. Put in edl mode and flash.
Fastboot kate rom.
http://bigota.d.miui.com/8.11.29/ka...29_20181129.0000.00_6.0_global_b29e9d8bcf.tgz
---------- Post added at 04:27 AM ---------- Previous post was at 03:32 AM ----------
Sorry i gave kenzo rom link..
Use kate rom. Link changed again.
naik2902 said:
Use edl mode method.
Mi pc suite already has usb drivers. No need to install drivers twice.
Remove other drivers and check.
Or
Put device in fastboot mode. Vol down +power
Connect to pc
Use this fastboot command in cmd.
fastboot devices
If serial number of device appeaered then ur device is detected.
Ur device is locked. Now put device from fastboot mode to Edl mode. And flash fastboot rom using mi flash. Select " clean all" option.
Click to expand...
Click to collapse
Hello and thank you for your help.
I actually installed the drivers AFTER MI PC suite failed to detect my device, at that time windows displayed it as just "android device".
Fastboot CMD show me this, it's correctly working?
I don't have time to try the EDL method today, I'll give it a try tomorrow. Will it work on a unlocked(I meant Locked) device?
Teo128 said:
Hello and thank you for your help.
I actually installed the drivers AFTER MI PC suite failed to detect my device, at that time windows displayed it as just "android device".
Fastboot CMD show me this, it's correctly working?
I don't have time to try the EDL method today, I'll give it a try tomorrow. Will it work on a unlocked device?
Click to expand...
Click to collapse
Did u unlocked officially using miunlock tool?
Check ur bootloader status. Using below.command
fastboot oem device-info
If unlocked = true .Then u dont need edl mode..u can flash it in normal fastboot mode.
Just download fastboot rom. I gave link.
Extract it to folder
Put phone in fastboot mode and connect.
Run mi flash tool
Browse and select extracted tgz main folder
Select "clean all" option
And flash.
naik2902 said:
Did u unlocked officially using miunlock tool?
Check ur bootloader status. Using below.command
fastboot oem device-info
If unlocked = true .Then u dont need edl mode..u can flash it in normal fastboot mode.
And flash.
Click to expand...
Click to collapse
The device its unlocked (I meant LOCKED), I didn't tamper with it or tried to flash something, it just bricked on its own.
I'll try your method tomorrowm hoping the problem isn't hardware related.
Teo128 said:
The device its unlocked, I didn't tamper with it or tried to flash something, it just bricked on its own.
I'll try your method tomorrowm hoping the problem isn't hardware related.
Click to expand...
Click to collapse
Wtf dude. Cant u read.
It shows Device unlocked = false
Means Ur device is locked.
U need to flash fastboot rom using edl mode.
naik2902 said:
Wtf dude. Cant u read.
It shows Device unlocked = false
Means Ur device is locked.
U need to flash fastboot rom using edl mode.
Click to expand...
Click to collapse
You are right! I'm sorry, it's my bad, I'm writing "Unlocked" instead of "Locked" so stupid. LOL
I was talking about the EDL Mode method of course, I downloaded everything, just need time to try
Thank you very much for your help
Teo128 said:
You are right! I'm sorry, it's my bad, I'm writing "Unlocked" instead of "Locked" so stupid. LOL
I was talking about the EDL Mode method of course, I downloaded everything, just need time to try
Thank you very much for your help
Click to expand...
Click to collapse
Have u ever unlocked it before? By Officially or unofficiallly?
If u unlocked it before. Then did u try to flash twrp and install custom rom?
naik2902 said:
Have u ever unlocked it before? By Officially or unofficiallly?
If u unlocked it before. Then did u try to flash twrp and install custom rom?
Click to expand...
Click to collapse
Nope, I decided to keep it stock so I didn't attempt anything. It just bricked itself...
naik2902 said:
Have u ever unlocked it before? By Officially or unofficiallly?
Click to expand...
Click to collapse
I putted the phone in EDL mode and I'm tryng to flash it with miflash tool, it gives me this error "cannot receive hello packet, miflash is tryng to reset status!" :silly:
Teo128 said:
I putted the phone in EDL mode and I'm tryng to flash it with miflash tool, it gives me this error "cannot receive hello packet, miflash is tryng to reset status!" :silly:
Click to expand...
Click to collapse
Make sure ur downloaded file is fully downloaded.
Extract tgz zip in folder fully.
Browse and Select main folder in miflash tool.
What option u using during flash ?
Use clean all
naik2902 said:
Make sure ur downloaded file is fully downloaded.
Extract tgz zip in folder fully.
Browse and Select main folder in miflash tool.
What option u using during flash ?
Use clean all
Click to expand...
Click to collapse
I did it but it's not working, the phone is in ELD mode and recognized as QDloader 9008
Teo128 said:
I did it but it's not working, the phone is in ELD mode and recognized as QDloader 9008
Click to expand...
Click to collapse
Check this thread and go through all below comments.and try what users did when they faced this problem.
https://en.miui.com/forum.php?mod=viewthread&tid=354839&extra=page=1&page=2&mobile=2
Could be Many reasons
May be admin privileges to mi flash
May be 32 bit pc u using
May be u need to move rom folder to main c directory
Or many more
Go though comments. They solved it.
naik2902 said:
Check this thread and go through all below comments.and try what users did when they faced this problem.
https://en.miui.com/forum.php?mod=viewthread&tid=354839&extra=page=1&page=2&mobile=2
Could be Many reasons
May be admin privileges to mi flash
May be 32 bit pc u using
May be u need to move rom folder to main c directory
Or many more
Go though comments. They solved it.
Click to expand...
Click to collapse
I already checked that thread...
I have both 64bit windows 7 and 10, tried to move the folder to C: and to run MIflash as administrator, I'll try to start over and download the rom again :crying:
Teo128 said:
I already checked that thread...
I have both 64bit windows 7 and 10, tried to move the folder to C: and to run MIflash as administrator, I'll try to start over and download the rom again :crying:
Click to expand...
Click to collapse
U dont need to download again.
Ur rom zip comes with file name.
Romszip Filename Starts with
kate ....global... ens with something
http://bigota.d.miui.com/8.11.29/ka...29_20181129.0000.00_6.0_global_b29e9d8bcf.tgz
The last number here...b29xxxxxcf is md5sum.
To calculate if u have downloaded file properly .
Just Check md5sum of rom zip using md5 checker.
Install any md5hash checker app from playstore on smarphone.
..Download rom zip on smartphone and check md5sum of downloaded file using the app.
Go through those comments. The link i gave u..
Google search redmi note 3 with those errors. U will find solution somewhere. U dont make use of google thats why u cry.
naik2902 said:
U dont need to download again.
Ur rom zip comes with file name.
Romszip Filename Starts with
kate ....global... ens with something
http://bigota.d.miui.com/8.11.29/ka...29_20181129.0000.00_6.0_global_b29e9d8bcf.tgz
The last number here...b29xxxxxcf is md5sum.
To calculate if u have downloaded file properly .
Just Check md5sum of rom zip using md5 checker.
Install any md5hash checker app from playstore on smarphone.
..Download rom zip on smartphone and check md5sum of downloaded file using the app.
Go through those comments. The link i gave u..
Google search redmi note 3 with those errors. U will find solution somewhere. U dont make use of google thats why u cry.
Click to expand...
Click to collapse
I actually always check google, only problem its that everyone says tons of different things :silly:
So, I started over, redownloaded the ROM (checksum perfect), downloaded the last portable version of MIflash, reinstalled the drivers, rebooted both laptop and phone, started MIflash as administrator...
AND FINALLY!
The device was succesfully unbricked! Many thanks!:good::fingers-crossed:
So, now I have android 6 and MIUI 10 (previously I had MIUI 8), should I upgrade to a better ROM?
Hi there!
I ported this TWRP recovery from Mi pad 3 and it works perfectly! It was tested on official firmware TOS-V2.01-A921 (Phoenix OS), I don't know will it work on older firmwares or not (try at your own risk). All user data and storage will be fully erased!
Step 1
First of all you need to unlock bootloader. It's required ADB to be installed on your PC, because it will be done via fastboot.
Follow this steps:
-connect the tablet to pc, (first you have to enable OEM unlocking and USB debugging in Developer options)
- reboot the tablet in fastboot mode, hold buttons “power+Vol +” at startup, choose fastboot mode with Vol+ button, valid with Vol-
- open a command prompt in adb folder, then “fastboot devices”, then “fastboot oem unlock”, it should say “OKAY, finished”
Now it's done.
Step 2
Download this archive and unpack it (contains everything you need) - https://mega.nz/#!C1w0GaAI!Zw1QXuAgBLNOjymsWanQPuoKr8N6IhPAhuZy1yjlv-k
- Install MTK drivers
- Click on Flash_tool.exe
- Select "scatter-Loading" and search MT8173_Android_scatter.txt
- Press "recovery" and add path (choose) recovery file - TWRP 3.2.3
- Select "Download Only"
- Turn off your tablet and wait some seconds
- Press “Download” button in FlashTool programm to start
- Connect your tablet into the computer via USB data cable holding volume + button (do not press power button!).
- The process will start and a red progress bar will appear after color purple, yellow. Finally, green circles should display.
That's all. Now you should flash TWRP: hold buttons “power+Vol +” at startup, choose recovery mode with Vol+ button, valid with Vol- (alike in step 1)
If you face Error message like this:
BROM ERROR : S_DL_GET_DRAM_SETTING_FAIL (5054)
Obtain DRAM Failed!
Please check your load matches to your target which is to be downloaded.
Do this steps: choose scatter load -> load TWRP file ->[/B ]Push download button -> plug in the usb cable without pushing volume up
Step 3
Now it is required to format internal storage to be displayed properly (you will see 0 mb storage size). Just go to wipe section and choose "wipe data" option (write "yes" on keybord and accept).
After this reboot recovery ( go to reboot section -> reboot recovery)
Step 4
Connect tablet to PC and copy Magisk package to internal storage (Magisk should be flashable via TWRP in .zip format and can be found in appropriative thread). I've succesfully installed Magisk v17.1.
Afterwards, go to install section -> install package and reboot device (no wipes after installation are required). If it will ask for installing TWRP app , just cancel that.
All above-described actions should be fully completed, sure nothing is missed ! Because in this case your tablet will not boot!
So, that's all ! Let me know if you face any issues. Enjoy
Custom ROMs for TWRP can be found here:
Modified stock ROM - https://forum.xda-developers.com/android/help/firmware-modified-stock-rom-v2-01-t3894124
ASUS ZenUI ROM - https://forum.xda-developers.com/android/help/firmware-asus-zenui-rom-teclast-t8-t3898591
MIUI 10 ROM (stable!) - https://forum.xda-developers.com/android/help/firmware-miui-10-rom-teclast-t8-beta-t3910219
Pixel Experience ROM - https://forum.xda-developers.com/android/help/firmware-pixel-experience-rom-teclast-t8-t3919512
>> P.S. In the nearest future I will release some custom ROM'S for our device, at least Stock ROM for flashing via TWRP with ROOT added.
This will be amazing - THANK YOU!
Thank you for your tuto.
I want to put your asus rom in my teclast T8.
On my computer flash tool don't seems to work. I have a screen sp flash tool is loading and then, nothing.
I am on Win10 and try all compatibility mods and admin mod..
Any idea ?
naonilio said:
Thank you for your tuto.
I want to put your asus rom in my teclast T8.
On my computer flash tool don't seems to work. I have a screen sp flash tool is loading and then, nothing.
I am on Win10 and try all compatibility mods and admin mod..
Any idea ?
Click to expand...
Click to collapse
Try to install drivers for win 10 from: https://forum.xda-developers.com/showthread.php?t=1982587. For me it works perfectly on win 7,8. But it is recommended to use version of SP flashtool I attached here for our device.
Sword900 said:
Try to install drivers for win 10 from: https://forum.xda-developers.com/showthread.php?t=1982587. For me it works perfectly on win 7,8. But it is recommended to use version of SP flashtool I attached here for our device.
Click to expand...
Click to collapse
Looks that this issue is caused by very unfortunate folder naming in zip archive. Remove "," from folder names and you should be fine . Just remember to do that also for folder T8 TWRP RECOVERY - otherwise you will face "scatter file invalid" error later.
hello sword900,
i have downloaded your mtkflash tool but i have always an issue with the download of your recovery to the tablet.
every time, i have an flash error 4051 dram or so.
i have many tried this with different mtk drivers and disabling windows driver signature but it wont work.
after that i have installed the last official firmware V2.01-A921.
the installation was successful and that approved that my setup is ok.
i think there is a mistake between the recovery file and the scatter information.
have you any idea, what i can do to solve this problem?
thanks in advance
dreas
ok, i have found the solution. with an other flash tool and scatter file it works.
now i have tried the asus and stock rom.
it seems to be that the asus rom has gps funktionality. nice!
dreas74 said:
ok, i have found the solution. with an other flash tool and scatter file it works.
now i have tried the asus and stock rom.
it seems to be that the asus rom has gps funktionality. nice!
Click to expand...
Click to collapse
Yeah, this recovery works only on last firmware TOS v2.01. As I know, our device is not supplied with GPS module, so it won't work. Anyway let me know about your experience after testing my ROMs
dreas74 said:
ok, i have found the solution. with an other flash tool and scatter file it works.
now i have tried the asus and stock rom.
it seems to be that the asus rom has gps funktionality. nice!
Click to expand...
Click to collapse
I also solve mi matter with an other flash tool and scatter file !
I am on the asus ROM for the moment and that's working like a charm, thank you for your work.
---------- Post added at 11:04 PM ---------- Previous post was at 11:02 PM ----------
alex.niemnozka said:
Looks that this issue is caused by very unfortunate folder naming in zip archive. Remove "," from folder names and you should be fine . Just remember to do that also for folder T8 TWRP RECOVERY - otherwise you will face "scatter file invalid" error later.
Click to expand...
Click to collapse
I can confirm, I lost probably many thousands of my hairs with that problem !
Tried somebody this solution on 1.10? Will it work, or i have to update to TOS-V2.01-A921?
Teclastt8 said:
Tried somebody this solution on 1.10? Will it work, or i have to update to TOS-V2.01-A921?
Click to expand...
Click to collapse
You can try this but I don't think stock firmware will boot after this. So, you can install twrp and flash custom ROM. Anyway all your data will be lost...
Sword900 said:
You can try this but I don't think stock firmware will boot after this. So, you can install twrp and flash custom ROM. Anyway all your data will be lost...
Click to expand...
Click to collapse
:good: Thank you! I don't want to use the original, I want to use your asus rom, just asked it because i want to know that the 2.01 is necessary or not.
Excuse my bad English!
Another question... if i want back the original 1.10, i only need install it via SP flash tool?
Teclastt8 said:
:good: Thank you! I don't want to use the original, I want to use your asus rom, just asked it because i want to know that the 2.01 is necessary or not.
Excuse my bad English!
Another question... if i want back the original 1.10, i only need install it via SP flash tool?
Click to expand...
Click to collapse
Yeah, you should do firmware upgrade via SP flash tool in this case.
Hi, i have tried to install TWRP for a couple days now on my Teclast T8. Tried several different drivers, scatter-files and Smart Phone Flash Tool. Any hints that i have missed?
Error message with included Smart Phone Flash Tool, scatter and TWRP.
BROM ERROR : S_DL_GET_DRAM_SETTING_FAIL (5054)
Obtain DRAM Failed!
Please check your load matches to your target which is to be downloaded.
Windows 10 10.0.17763
Build Number in Android: TOS V2.01_20180612
MediaTek USB Port (COM3) Driver 3.0.1504.0
pB2NP said:
Hi, i have tried to install TWRP for a couple days now on my Teclast T8. Tried several different drivers, scatter-files and Smart Phone Flash Tool. Any hints that i have missed?
Error message with included Smart Phone Flash Tool, scatter and TWRP.
BROM ERROR : S_DL_GET_DRAM_SETTING_FAIL (5054)
Obtain DRAM Failed!
Please check your load matches to your target which is to be downloaded.
Windows 10 10.0.17763
Build Number in Android: TOS V2.01_20180612
MediaTek USB Port (COM3) Driver 3.0.1504.0
Click to expand...
Click to collapse
Just read some previous posts, it should help. Remove all commas,spaces etc in all folders' names. If not - try to use another scatter file and version of SP flashtool.
Sword900 said:
Just read some previous posts, it should help. Remove all commas,spaces etc in all folders' names. If not - try to use another scatter file and version of SP flashtool.
Click to expand...
Click to collapse
Thanks for replying!
As you can see in this picture i have replaced the spaces in folder and file names.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Could you please refer to other scatter files that may work? I have tried with SP flashtool v 5.1824 aswell, but it's the same error there.
If I remember correctly, I did it that way:
scatter load->Twrp load->Push download button->without push volume up, plug in the usb cable
Try this, if nothing else can help.
Teclastt8 said:
If I remember correctly, I did it that way:
scatter load->Twrp load->Push download button->without push volume up, plug in the usb cable
Try this, if nothing else can help.
Click to expand...
Click to collapse
Yeeez... That worked. Thanks a lot.
@Sword900, could you add this in the description for other frustrated people like me?
I have two new T8, when i try to start new instalation latest version of facebook, messenger, instagram apps, apps can not start. App closed, send report or restart it. Not working. Tried with 1.10 and 2.10 firmware but result is the same. Others apps or games are ok. Any idea to fix it? Thank you.
Error
Deleted.