Prologue- Before the bootloop and can't boot to recovery mode
So my ZH&K Odyssey Spin has been affected by malware and viruses. The effect of this is that I can't seem to "Reset to Factory Settings" and it just says "Unmounting Phone Storage". I even tried to enter to "Recovery Mode" and resetting from there but still no luck. Then I read about custom ROMs and flashing your ROM to remove malware and also rooting.
Chapter 1- The flashing, rooting and Custom ROMs
So I learned about rooting my android phone to gain more "admin" privileges and to be able to delete the bloatware in the stock ROM that ZH&K has but I noticed that the virus is included in the ROM so that gave me an idea to download a custom ROM and flash to my mobile phone to remove the bloatware and viruses. I tried doing the SPD Flash tool(UpgradeTool/FactoryDownload) and mounted the ROM for ZH&K Odyssey Spin (My phone hehehe ) and when I started the operation it just sat there doing nothing. So I researched more and found out about the ADB and fastboot methods of flashing ROM. I wanted to to flash TWRP Recovery into my phone but there was no TWRP Recovery available for my device so I "accidentally" downloaded the TWRP Recovery for Motorola G Falcon and after flashing to my device I noticed that I can't access the "Recovery mode".
Chapter 2-The "Bricking"
So when I flashed the 'TWRP Recovery for Motorola G Falcon' I cannot access the Recovery Mode. Take note that I learned about adb and fastbooting. So out of panic I typed "fastboot -w" (a command that wipes your data) into the cmd console. Then it happened when my phone rebooted it will show the "ZH&K" logo and play its animation and also has sound but after that it just stays that way and black screen and bootloop. So I tried to access the Recovery Mode(which is now unaccessible:crying and still shows the logo but does not go in but instead the screen goes black.
Epilogue- The "Begging for Help"
So I don't know what to do at this point and want some assistance for I have searched the net and there is no other problem like mine I even did the Battery pull method to "refresh" the phone but still no luck and some help will be greatly appreciated !
Phone: ZH&K Odyssey Spin
External: 8gb Sandisk
If you want to know something just ask thanks!!!
Related
So a friend recently bought this spanish voxter tab 97 IPS (16GB) and after a few days of usage and several attempt to install a custom ROM, the tablet stopped booting. According to him, he tried loading a "compatibility bla bla bla.zip" file with CMW which I really do not know what it is, and since he did the installation, the tab stopped booting into system. Every time it's turned on, it just stops at the boot screen and nothing more. Although before this, he had installed a custom recovery and had also done a Nandroid backup with the recovery. However, what baffles me is, CMW is no longer accessible through the normal "power + volume up" key combo and I'm quite unsure of how to boot into fastboot.
That aside, I tried booting into recovery with adb because apparently, adb recognizes the device whenever it's stuck at boot screen, this also failed, neither did rebooting into fastboot via adb work. All I need to know is if this device is totally bricked, or if there's still something I can do. If there's any, I really would appreciate every help offered. Thanks..
LG Escape running 4.1.2
here is the progression of events:
1. rooted device
2. root seemed successful and no malfunctions
3. backed up all apps and system data with Titanium backup
4. the lg escape has no way to unlock the bootloader, so I tried various other methods. one of which was entering recovery mode via terminal commands. this is basically a hard reset, and it wiped all my data
5. I restored all my apps and data from my external sd card with titanium
My best guess is this is where something went wrong
6. upon restoration it prompted me to reboot the device
7. reboot passes manufacturer logo, but resets when AT$T logo appears
8. as stated earlier, there is no way to enter recovery mode during boot.
9. there is a hard reset during boot, but mine will not work, as it requires touching buttons which do not seem to be active in my stage of the boot sequence
so, I understand this does NOT mean my phone is bricked, but I don't know how else to get it to boot back up, or what is even causing the boot loop, as I DO NOT HAVE ANY CUSTOM ROMS flashed. any help here is very appreciated!
EDIT: so I have attempted to use adb on my pc to reboot into recovery from there, but it occurred to me that while I was in recovery the first time, I never checked "usb debugging". as a result my adb console commands cant even see my device. any way to turn on usb debugging while locked in a boot loop?
also, I can get it to enter download mode. I was hoping I could just reflash the firmware to it without needing to enable usb debugging, but have no clue how to do that while locked out of the phone.
I realize this is a very specialized set of questions, but it is necessary to ask here as the most people will see it. im open to any ideas
whitechameleon said:
LG Escape running 4.1.2
here is the progression of events:
1. rooted device
2. root seemed successful and no malfunctions
3. backed up all apps and system data with Titanium backup
4. the lg escape has no way to unlock the bootloader, so I tried various other methods. one of which was entering recovery mode via terminal commands. this is basically a hard reset, and it wiped all my data
5. I restored all my apps and data from my external sd card with titanium
My best guess is this is where something went wrong
6. upon restoration it prompted me to reboot the device
7. reboot passes manufacturer logo, but resets when AT$T logo appears
8. as stated earlier, there is no way to enter recovery mode during boot.
9. there is a hard reset during boot, but mine will not work, as it requires touching buttons which do not seem to be active in my stage of the boot sequence
so, I understand this does NOT mean my phone is bricked, but I don't know how else to get it to boot back up, or what is even causing the boot loop, as I DO NOT HAVE ANY CUSTOM ROMS flashed. any help here is very appreciated!
EDIT: so I have attempted to use adb on my pc to reboot into recovery from there, but it occurred to me that while I was in recovery the first time, I never checked "usb debugging". as a result my adb console commands cant even see my device. any way to turn on usb debugging while locked in a boot loop?
also, I can get it to enter download mode. I was hoping I could just reflash the firmware to it without needing to enable usb debugging, but have no clue how to do that while locked out of the phone.
I realize this is a very specialized set of questions, but it is necessary to ask here as the most people will see it. im open to any ideas
Click to expand...
Click to collapse
i have now tried to flash the firmware while in download mode using a less than legitimately obtained lg R&D tool. however, i need V10F_00.kdz and i am facing a bit of censorship. any kind soul willing to host this file on dropbox or similar so i can download it?
Usually devices have a button combination to press when powering on to get into different modes. Maybe try searching for the button combination of your phone on Google? Try ' lg escape button recovery ' ?
J2270A said:
Usually devices have a button combination to press when powering on to get into different modes. Maybe try searching for the button combination of your phone on Google? Try ' lg escape button recovery ' ?
Click to expand...
Click to collapse
believe me i have. the only combo i can get to is download mode. there is a combo for a hard reset, but my touch buttons arent active during boot.
Hi guys, I really need your help.
I'm new at this rooting stuffs and I tried to root my Oppo Neo 5.
I tried so many softwares like OneClickRoot, FramaRoot, and Kingroot but none seemed to work.
So I resorted to an app called oppo tools
It worked at first but I got really annoyed when my status bar suddenly colored to red when my phone discharges to 15% so I unrooted my phone and rooted back again. I really thought that was going to fix my problem but that's where the bootloop issue started.
I tried to flash some custom recovery zip but it failed since I only have a stock recovery.
But the thing is, I found a guide that says to rename the clockworkrecovery img to PG86IMG.zip.
So I did tried that and as soon as I flashed the zip from my stock recovery, my phone hanged.
I long-pressed the power button to restart and boot into recovery mode but nothing seems to happen.
I'll try to explain a bit more on how it looks when I boot my device.
When it boots normally (I mean not pressing the volume to enter recovery mode) it will only show the logo but when I try to go into recovery mode it will show the logo with a little text on the lower left portion "Recovery Mode"
Before I flashed the PG86IMG.zip, recovery mode was still working and the charging screen when off is working too.
but after I flashed the zip, every time I try to recovery mode the logo shows up with the little text but RECOVERY MODE isn't working. When I charge my phone it automatically boots up and shows the logo and text like it's trying to go recovery mode (I'm just trying to charge? It's going to recovery mode)
I tried using "adb devices" on cmd but it's not detecting any devices.
I'm really out of ideas guys, I know not all people use this model but what would be your suggestion?
A suggestion on how to fix this would really be appreciated :good:
I'm sorry I'm really new at this, please correct me if I did something wrong starting this thread. :angel:
@DeepBricked please confirm your problem, Boot-loop and can enter into recovery.
Salman Al-Badgail said:
@DeepBricked please confirm your problem, Boot-loop and can enter into recovery.
Click to expand...
Click to collapse
Oh, I'm sorry, I didn't notice.
Lately I can't access the recovery mode but now
I'm currently on Boot-loop and I can enter into recovery.
The ColorOS recovery mode only have limited function that I can mess around.
It only has the apply update, wipe data and cache, reboot, power off and system file verification.
As always I already did wipe the data and cache but nothing happens. Still boot-loop.
What should I do?
DeepBricked said:
Oh, I'm sorry, I didn't notice.
Lately I can't access the recovery mode but now
I'm currently on Boot-loop and I can enter into recovery.
The ColorOS recovery mode only have limited function that I can mess around.
It only has the apply update, wipe data and cache, reboot, power off and system file verification.
As always I already did wipe the data and cache but nothing happens. Still boot-loop.
What should I do?
Click to expand...
Click to collapse
You made a soft brick, not to worry flash it with correct stock firmware, if the phone is in warranty than ask them to do flash, this will take approx 10-30min. If it isn't in warranty than you should try it own or else pay some amount and the rest they will do.
Salman.
how about bootloop, cant enter recovery, reboot continiously when turn on even going to recovery, only fastboot isnt rebooting automaticaly but pc days drivers not succesfuly installed, and when off it qont detect by pc because of rebooting auto,
where can i find a rom for my oppo neo 5
pls help me pls
R3 Pro (3GB/32GB, 2015817 version) came with some chinese/sellers custom ROM (and locked bootloader). It was heavy and bloated, so I decided to update it. Tried latest global stable (fastboot) ROM via miflash, flash was successful but that's was a lie - it stuck on mi logo...
Then I tried various other ROMs, global and developers, latest and older, some xiaomi.eu, manhit, etc. (for locked bootloader) and all I've got was either just a mi logo or mi logo with "powered by android" animation beneth. I left it for hours after flash and still nothing.
Then I found some ways to flash twrp, did that successfully, booted into it, wonder around in terminal and file manager, tried some recovery ROMs - but the result is the same - just logo or logo + animation.
I can get into fastboot (but it doesn't realy matters since bootloader is locked), download (EDL) mode, that Xiaomi menu (with Power and Vol+, with "shortcuts" to all the modes, hardware tests - btw. everything works there, etc.), twrp, charge battery (with some ROMs phone just gets warm and I know it's charging, there are no LED and/or animation, but in some everything works just like it should), but just can't boot into OS.
And I'm going nuts!
Here are some logs from the last ROM (i don't even know anymore which one is it) - pastebin.com/qaKVzxue and pastebin.com/dM3nEVj0
I'm not so experienced in looking at that but seems like every other thing in there, like cpu, i2c (touch/sensor), sound, battery, etc. is broken/faulty which is not true - everything was fine before update, and everything IS still fine according to inbuilt (xiaomi) hardware tests.
So somehow it seems that all the ido ROMs I tried are wrong for this device? Or am I missing something (quite possibly, I'm tired and pissed off)
Last night I did a backup of efs/nvram and then wiped internal memory/partitions, flashed latest global ROM, restored efs/nvram - phone stuck, but this time not on MI logo but freakin' penguin logo (like here en.miui.com/thread-377870-1-1.html). Same logo is for fastboot mode, no more bunny. Then flashed twrp and phone now shows mi logo with "powered by android" animation beneath, like before...
I don't know how this works with Xiaomi phones, but looks like it worked with some factory/seller special combination of ROM and bootloader. Then I did update and something stuck, maybe differences between ROM and bootloader, or some inside/hidden security mechanism that stops boot process? And because I can't find original firmware and/or bootloader is locked (maybe even updated?) it's now stuck...
Either that or some HW fault, but it would be insane that official ROM update with official tools and in factory download mode with full battery can cause such problem!
Can you go to twrp recovery?
Yes, like I said in the first post. I can do anything but boot android/MIUI. It's either because of locked bootloader or somehow official ROM installed officialy (via MiFlash in EDL mode) bricked phone, which is catastrophic bug i.e. epic design/implementation fail by Xiaomi.
Try this
https://forum.xda-developers.com/redmi-3/help/bootloop-bootloader-locked-options-t3331139
Sorry to intrude, I have pretty much the same problem.
Phone is stuck in bootloop and I can only access fastboot mode and EDL mode (but in EDL the phone does not connect to pc) and when I try to flash a stock ROM (since I know it is a software issue due to an unfortunate update) it says "locked device". So I tried to unlock it via MiUnlock... but phone cannot be verified 'cause "account not bound to this device" and obviously I cannot change any options since I cannot use my phone.
Please, help
it was happened to me about 3 days ago when i play around with the twrp & rooting thingy... tried everything from youtube to various forum solutions... just one link really works when you only have fastboot options and your phone bootloader is still unlocked. just follow the steps in the OP... key things here is downloading the tool to read your phone as mentioned in the OP i.e [TOOL]Minimal ADB and Fastboot [1-6-17]
1) Download Tool -> https://forum.xda-developers.com/showthread.php?t=2317790
2) Follow all the steps in the OP -> http://en.miui.com/thread-277276-1-1.html
3) Enjoy your phone from back from the dead.. LOL!
4) Remember here, the key is NEVER GIVE UP and PATIENT!
NOTE : The Device will start, wait till completion , it can take up to 10 Minutes. -> for me around 15-20 minutes for I have flashed the current beta rom of MIUI8 7.6.8
cheers, guys!
blx-
I had a similar situation.
Officially unlocked boot loader. Flashed TWRP using fastboot. Only got the mi logo and a boot loop on start up.
Could not turn on. Could not boot into TWRP.
When the phone was boot looping I could still get into fastboot mode by holding power+volume down.
I booted from fastboot mode into TWRP by opening the command prompts and using
"fastboot boot twrp2.img"
That got the phone available from windows explorer. I was able to move a new ROM image to the SD card and install from TWRP.
Currently running lineage 14.1 -20190112.
I lost a bunch of **** but my phone seems to turn on for the moment.
Note, I still cannot boot into TWRP using the phone only. I can only boot in from fast boot as above.
Hi All,
I am currently in the phone repair business. Well i buy as much as i can fix and sell on. Its all fun. I have a very nice one currently and looking to see if anyone has ideas. All i want to do is boot to recovery that is my current goal.
So phone clearly has corrupt installation, likely a flash Rom or update gone wrong. It boots to Huawei logo then reboots and that's all it does. Tried de-powering and all sorts including removing battery cable but to no luck.
There is no recovery mode
No download mode
Can get to fastboot but unable to run commands it seems due to FRP lock. I am not worried about FRP lock at this time, i only want recovery back.
Tried:-
All flash commands and all fail
Any attempt to get to receovery or download mode fails
All three buttons to force SD card boot fails
Currently trying to boot using SD card but seems i need to change boot devices from within recovery. Well it has no recovery mode so no luck there.
So it is pretty much a brick at this point and could be a write off but before I give up does anyone have any other ideas? maybe a FB command i can run with FRP lock and bootloader lock on?
Thanks
Karl