I was in a .224 rom wtih xpower v3 and now i wanted to updet to v5. I installed a stock .305 rom with flashtool but after the installation and after the boot i only get system ui force closed reports. Someone can help me? it was month ago when i used flashtool, where should i take X to wipe(apps log,diag, persist, ssd, userdata or somewhere else)? Sorry for my bad english.
Related
[HELP] please help, i have flashed the cm7.0 rom and i looped during the SE logo appear, plx help. i juz wanna to flash back to STOCK ROM, wt can i do. THX!
redtab said:
[HELP] please help, i have flashed the cm7.0 rom and i looped during the SE logo appear, plx help. i juz wanna to flash back to STOCK ROM, wt can i do. THX!
Click to expand...
Click to collapse
ok you have two ways as per i know
Try this one first as this will get you latest firmware
Update via Wotan Server -
Link - Update Method 1
Second if via CWM flash but i can't guaranty about it,read the forum and try at your own risk...and also this is not latest firmware as Wotan Server method
Wotan Server is latest one for Xperia Mini (XM)
Link - Update XM via CWM
Returning to Stock ROM, Rooting it again and enabling WiFi, haptic feedback etc
I had that problem, its a prevailing issues with the newest build. There's no solution to using that 'stable' build on Xperia Minis. If you still want to use Cyanogen, get the nightly build. It works, you can try Cyanogen but its quite unstable. One of the biggest problem is the screen orientation lag, which is around 2-3 seconds.
Check this out, I just wrote a guide today for returning to stock ROM.
http://forum.xda-developers.com/showthread.php?p=21234974#post21234974
I have an SK17A (Xperia Mini Pro) and am interested in installing FXP on it. I have some questions:
1) Will I notice improved performance over Sony ROM .58? Will most everything work as it should? Will an average user experience an improvement using FXP? Or will I be more frustrated with unknown issues?
2) I'm leaning towards the CM 7.2 ROM and not the CM 9.0 ROM based on what I have read in the developer forum as 9.0 seems very unstable and buggy at this point. Is this accurate?
3) There seem to be outstanding bugs in FXP based on CM 7.2 (keyboard issues, etc) that are easily fixable but have been around for a long time. Are they really easily fixable? Why haven't they been fixed in FXP 103?
4) Why do I need to install Sony ROM .42? Is the install not possible with .58?
5) Why is there no GAPPS download linked for the Xperia Mini Pro in the FXP thread?
6) If I proceed I assume I need to follow these general instructions:
-unlock boot using fastboot
-install CWM
-backup (Nandroid?)
-install FXP
-install GAPPS
Is this accurate?
Any answers to these questions would be greatly appreciated as I haven't seen them in my forum browsing and searching so far.
First of all NO ONE CAN COMPARE WITH STOCK ROM STABILITY ! In case of stability stock ROM is THE BEST ! And the performance ? With few uninstallation of unwanted software and freezing unwanted process you can make stock rom even more faster than CM is...
Second CM is in [development] its 100% not stable and fully working out of box as Stock ROM is....
and CM9 is highly......... unstable right now I have tested it on my XMP and i reflashed to stock ROM in just 15 min of look.
Third CM is not giving concern to problems as they have posted the keyboard fixes and other fixes before so they are just developing ROM for other things ...
You have to hit your head over forums to solve your each and every bug you found.
Fourth you need not to be on .42 to install CM7 you can do it on .58 too but i am sure if you are looking for fully functional os with stock features too then you gonna dislike CM.And i m saying this cause i have tested CM on .42 HU and .58 Global ...
Fifth Gapps are not included in CM due to copyright issues so you have to install them separately ...
You can find it on official cyanogen Mod site or other forums too
Sixth
Your steps are correct but after backup you have to add one step thats "Wipe data/factory reset and wipe cache partition" through ClockWorkMode recovery options
and after that install FXP ROM
Backup is not necessary its optional unless you want to restore your previous ROM as you left it before flashing CM.
You can make Nandroid backup using Clockworkmode recovery option "backup and restore" and the backups can be found on SD card in SDCARD/clockworkmode folder.And can be used to restore your previous ROM anytime.
Lastly i have tested hell out of each and every rom and finally i switched to stock one .58 ROM not .62 as its not global one.
And i have installed Mini Mode update to get widget panel in status bar and reboot option in power menu.
Used system app remover and titanuim backup to remove and freeze unwanted apps.
And also i have used all launcher and switched to stock one and the Xperia Arc launcher for stability and performance.
And Finally ... you have any querries ? comment back i will answer you and DO NOT Hesitate to Hit THANKS button if you are satisfied with my answer and do care for my time that i spent to answer your question to get your problems solved.
NOTE : I am not against any ROM or any developer and please note if stock ROM is for ******* then every handset is made for *******
Its not my words Moderator Please refer this
Arrogant and edited Comment
Original Comment
I need help, I installed the rom and it appeared an error when I make a video recording in camera application, like this:
warning: Error records.
I have already installed another kernel and nothing, I have already installed another official rom doing all wipes and nothing, error persite.alguem help me please.
sorry for the English.
Sorry to bring up such a silly issue.
But I never encountered any problem like this. So, pls help me out....
I have a WT19i device which being modded with various custom rom at various time.
for more than 1.5 years I didn't got into any kind of problem. and it all messed up.
Yesterday I was trying to install Super jelly bean 8.0 rom.
to do that,
1. I flashed nAa's kernel
2. Wiped whatever needed.
3. Installed rom's zip and gapps
4. Reboot my device.
Everything working well except i don't have any touch response....!
Then I re-flashed my stock 4.0.4 rom, and then everything working fine. (including touch)
Again I flashed cm10 kernel and then installed Cm10 rom
Same problem again, no touch response.....
I really want to install jelly bean rom to my device.
So, pls give me a solution.
Sry if this [Q] is bothering.
Hello my friends,
after a year with stock rom and nemesis kernel, i decided to change the rom to compare the performance but after a week testing i see variuos missing stuff.
- camera it's not like the screenshot in the post of the rom (i cant link the pic)
- i have continouos system ui problem
- i check that md5 rom's it's wrong (i redownloading :good
i choose enigma rom 6.5, what i do...
# i have by default 0.400, update to 1.100 with flashtool.
# install kernel with fastboot
# put the rom in the sd, installed-
# reboot wipe data-dalvik
this step i dont understand...i think that i miss this
"Flash the update CWM flashable zip"
What should I do if I want to reinstall?, start with the stock again?
regards!
Just flash the update !! -___-
Send from my XZ with 4.4.2 to your eyes !
and where it's it? :silly:
if I want to start all over again, I flash the rom 1.100? or just reinstall from sd?
Regards!