Greeting,
It was heard that rooting T-01D are similar as F-05D.
I found a website regarding rooting F-05D, but I dont read Japanese, just want to know if anyone have tried the enclosed method to root T-01D?
or could anybody do the translation, since the terms become quite strange after using the online translators
The following link is ref. of rooting F-05D:
ttp://ayati.cocolog-nifty.com/blog/2012/01/f-05droot-1d0b.html
(should be "http" rather than "ttp")
The source code of T-01D have been provided also, but I have no idea how to use it and root the machine:
ttp://spf.fmworld.net/oss/t-01d/data/download.html
(should be "http" rather than "ttp")
Thank you very much in advance?
Update of 4/4
the following t-01d rooting procedures is provided by Magimaster
Hello.
I am sending this pm regarding the translation for flashing the Fujitsu f-05d sold by Docomo in Japan. I cannot reply in the development section due to my low post count.
My phone is an f-05d. I do not have a t-01d but, according to the original rooting guide for the f-05d, the users are reporting success in rooting the t-01d as well.
I will not really translate for you. Rather, I will explain what I did to root my f-05d.
Here is a rough summary of the steps I followed:
For starters, you need to make sure that adb recognizes your phone when connected to the PC via USB. This means that you need to install the Android SDK and the USB driver for your t-01d by Fujitsu.
I had trouble getting adb to recognize my phone, as Window$ insisted in recognizing it as an USB drive. What I did, among other things, was:
In the phone settings, go to Applications > Development and check USB Debigging and Stay awake.
Install the Google USB Driver package, in the extras section of the Android SDK Manager.
With the phone connected to the PC, go to Window$ device manager > Universal Serial Bus Controllers and uninstall (use the delete key from your the keyboard) every mass storage device that appeared when my phone was connected. Disconnect and reconnect the usb cable.
Only until I did this final step was my phone recognized and listed as Android Phone > Android Composite ADB Interface in the device manager. If your device is not recognized, you just cannot continue. Look for help about this, or else you cannot move on with this method of rooting.
Confirm that your phone is recognized as Android Phone > Android Composite ADB Interface in the Window$ device manager. Do not continue until it is.
From the Android SDK manager, install the package android sdk platform-tools.
You need download F05Droot.zip from the original blog page your linked before. I will not link to the file directly, but you should have no problem finding it. Extract the files within into the program directory \Android\android-sdk\platform-tools (this is my path).
You need to download a replacement for the file lsm_disabler.ko that is inside the F05Droot.zip. Get it from here and extract it an replace the one inside the platform-tools directory.
By the way, this platform-tools directory is the one that has the adb executable file. Just a heads up.
You need to download su. I cannot tell you where to get it. I just do not know where I got mine from, but was easy so go for it When you have it, extract it and put it in the platform-tools directory.
Confirm that the platform-tools directory includes these files:
Code:
adb.exe
AdbWinApi.dll
AdbWinUsbApi.dll
su
lsm_disabler.ko
f05dsu.bat
There will be more, but these are the ones needed for this to work.
Now, get ready to root. Connect your phone to the PC.
Go to your phone settings > setting my body > step/activity counter app > pedometer use and confirm it is checked on.
In the platform-tools directory, look for f05dsu.bat and run it. A DOS window will open. This is the funny part. Unless you are doing this from a Japanese version of Window$, or from a Window$ with Japanese locale active, you will see a lot of strange symbols instead of Japanese characters... which would be the same for almost anyone anyway Regardless, you will see a prompt to Press any key to continue . . .. At this point, you do not need to do anything on your phone, other than visually checking that the check mark on the pedometer is set.
On the DOS window press any key, your will see more garbage and another prompt to press any key. This is the important part. See if you can find among all those symbols this pattern: OFF/ON. If you do see it, it means we are on track.
Now that you were able to see the OFF/ON, go to your phone and uncheck the pedometer (OFF) and check it again (ON).
In the DOS window, press any key. Your phone will reboot. The message in the DOS window says that you must wait for the phone to boot up and for Window$ to recognize your usb connection to the phone.
When/if your phone is recognized by Window$, go to the DOS window and press any key.
Again, press any key and your phone will reboot.
The DOS window has a message indicating that you must now install superuser and busybox. When your phone reboots, go to the android market and install from there when you have the time.
You can now close the DOS window because, unless there was any error, you are now rooted, my friend
From the market, install a terminal, or an app that includes a terminal. I use Rom Toolbox because it has a terminal and scripts to mount the /system as rw.
Open whatever terminal you chose and, at the $ prompt type su
If new prompt is #, type soff
You will need to run these commands every time before trying to mount /system as rw.
That is all. I hope you can root your phone.
Just a petition, post this message in the forums, as it may help others who have similar difficulties. It sure could have helped me if someone had done before me.
Have a nice one and please forgive my English.
Click to expand...
Click to collapse
update 15/4
On 13/4 finally i got my phone rooted
I have to run f05droot.bat instead of f05dsu.bat
After I have run the f05dsu.bat, for the steps, no error popout.
then I open the terminal type su, it reply me "permission denied".
I know it is not successful, after several run, the situation still the same.
after that have checked the contents of f05droot.bat and f05dsu.bat.
They are very similar but the f05droot.bat will push the superuser and busybox into the device at the same time.
(so I added those files in the directory \Android\android-sdk\platform-tools )
Therefore, i tried that and its works finally.
I feel really exciting at that moment.
I hope this post can help they T-01d user to root the phone.
personally I really like this phone ^~^
the su file is also important
Anyone try it? Does it work?
I have got the source code from its web
But I dont know how to use that and lead me to root the machine
ttp://spf.fmworld.net/oss/t-01d/data/download.html
Can you post a review of this device?
redcarrot said:
Greeting,
It was heard that rooting T-01D are similar as F-05D.
I found a website regarding rooting F-05D, but I dont read Japanese, just want to know if anyone have tried the enclosed method to root T-01D?
or could anybody do the translation, since the terms become quite strange after using the online translators
The following link is ref. of rooting F-05D:
ttp://ayati.cocolog-nifty.com/blog/2012/01/f-05droot-1d0b.html
(should be "http" rather than "ttp")
The source code of T-01D have been provided also, but I have no idea how to use it and root the machine:
ttp://spf.fmworld.net/oss/t-01d/data/download.html
(should be "http" rather than "ttp")
Thank you very much in advance?
Click to expand...
Click to collapse
If you have time, can you please post a mini review of the device? I wanted to buy one too and I'm quite excited reading your review!
Thanks and more power!
Here is the mini review
Screen color is perfect except black and accurate. Speed is good in comparing with SGS2. Battery life is similar to SGS2. Form factor is better than SGS2. Camera is outstanding, thanks to the 1.3MP camera. Waterproofing design is what I like. The bad is upgrading is only possible in Japan. Digital TV is useless. Sound level is a bit low.
personally i like this phone very much especially the outlook.
my personal review is the following:
1. same as above the screen is perfect
2. the camera is also excellent
3. while you have a phone call, it change mode automatically depends on the environment
4. if i switch off all the data things, this phone can stand more than one day
(so i wont blame the battery, because I think we use too many network related stuffs)
5. i have to admit that the firmware is not quite stable (fortunately the phone can be upgrade to 4.0 after july)
for the rooting process, it seems like someone has success:
(i think that is temp root)
search "T-01D 軟解, tofu-keitai" in google (that is chinese unfortunately)
redcarrot said:
Greeting,
It was heard that rooting T-01D are similar as F-05D.
I found a website regarding rooting F-05D, but I dont read Japanese, just want to know if anyone have tried the enclosed method to root T-01D?
or could anybody do the translation, since the terms become quite strange after using the online translators
The following link is ref. of rooting F-05D:
ttp://ayati.cocolog-nifty.com/blog/2012/01/f-05droot-1d0b.html
(should be "http" rather than "ttp")
The source code of T-01D have been provided also, but I have no idea how to use it and root the machine:
ttp://spf.fmworld.net/oss/t-01d/data/download.html
(should be "http" rather than "ttp")
Thank you very much in advance?
Update of 4/4
the following t-01d rooting procedures is provided by Magimaster
Click to expand...
Click to collapse
It really work!~
I rooted my T-01D with this method!
And it's permanent root!!
Many thanks!~
hi HaoyuWen,
i have followed the steps, when i type su in the terminal simulator, it comes out segmentation fault su, do you have any idea.
I use titanium backup to check and it said my t-01d is not rooted.
for the pedometer on/off things, do i need to press the home key and go back to the pedometer to do the switch?
Thank you very much in advance
HaoyuWen said:
It really work!~
I rooted my T-01D with this method!
And it's permanent root!!
Many thanks!~
Click to expand...
Click to collapse
So both F-05D and T-01D can use this ?
yes, but i havnt got that work yet.
just want to know when I get the device rooted, will the device screen shows the device is rooted?
finally i got my phone rooted
you have to run f05droot.bat instead of f05dsu.bat
the su file is also important
redcarrot said:
yes, but i havnt got that work yet.
just want to know when I get the device rooted, will the device screen shows the device is rooted?
Click to expand...
Click to collapse
You can install a root checker to see
^ Please update it on the front page
Gonna get mine soon, so excited to hear this
wth_is_life said:
You can install a root checker to see
^ Please update it on the front page
Gonna get mine soon, so excited to hear this
Click to expand...
Click to collapse
I think I brick my T-01D. Don' know why, I do exactly the same what I have been told here... Now It ends up infinite boot loop
Anybody help me please?
Hey there everyone, sadly this guide isn't working for me. Everything in the guide goes smoothly and I do exactly what is listed but after my phone reboots the final time I still have no root access. I run f05droot.bat instead of f05dsu.bat like the user said but to no avail, I even ran f05dsu.bat and still nothing.
Anyone else have trouble? Maybe it is because I am on a certain FW? I am on 2.3.5
Baseband Version C_L1_M23
Kernel version: 2.6.35.7 [email protected] #1
and Build number is V43R41C
Just wondering as I really want root to disable all of these RAM-hogging default applications.
Bump? Anyone?
As far as I know, this rooting method cannot be done on FW V43R41C.
Sent from my SC-01D using Tapatalk 2
kinchung said:
As far as I know, this rooting method cannot be done on FW V43R41C.
Sent from my SC-01D using Tapatalk 2
Click to expand...
Click to collapse
Aw Thanks for the notice, of course it's my firmware. Any idea about ICS? It was supposed to come out in July but yeah..
I don't know about ICS for t-01d. My sc-01d has been already upgraded to ICS, the performance is improved a lot. sh-01d also gets ICS today.
Sent from my SC-01D using Tapatalk 2
kinchung said:
I don't know about ICS for t-01d. My sc-01d has been already upgraded to ICS, the performance is improved a lot. sh-01d also gets ICS today.
Sent from my SC-01D using Tapatalk 2
Click to expand...
Click to collapse
I see, I read about the T-01D (among many others) getting updated from articles like this: http://forums.hardwarezone.com.sg/e.../docomo-update-ics-4-0-18-models-3662812.html
I'm sure the T-01D would perform pretty awesome and maybe pre-installed software would not be as big a deal as it is now. Maybe since your SH-01D is getting updated, T-01D isn't far behind. The only thing I have to see is if I can update out of Japan.
I don't have sh-01d but galaxy tab 10.1 sc-01d instead. My t-01d also upgraded to V43R41C last month during visiting Japan. Upgrade of t-01d may not be possible outside Japan as Software Update cannot be executed without docomo sim and network.
Sent from my SC-01D using Tapatalk 2
hey everyone long story short i rooted my tablet a while back and started having problems so i flashed a new rom and the wifi isnt working.
I went to androidfiles.org and clicked nabi 2 and download wifi-fix, ota update and stock zip rom and flashed those three zip files ( i compressed them) in twrp.. its booting up and everything but wifi isnt working. ive read a lot of peeps are having wifi probs. I have a xda link for my exact device and you guys tell me wut the hell im supposed to do. its got all kinds of stock roms and ota updats and stuff,... which one do i use wtf do i do. should i go one at a time from lowest to biggest, do i even need ota updates or w./e that is?!?!?!? please help guys my chirstmas is becoming a nightmare... its my only internet source.. i had to come all the way to the dang library for this crap.. please help!!!!! heres the link that might give u guys an idea on how to help.. heres the stock roms and stuff
http://forum.xda-developers.com/wiki/Fuhu_nabi_2 thank you!!!!!
duuude im baked said:
hey everyone long story short i rooted my tablet a while back and started having problems so i flashed a new rom and the wifi isnt working.
I went to androidfiles.org and clicked nabi 2 and download wifi-fix, ota update and stock zip rom and flashed those three zip files ( i compressed them) in twrp.. its booting up and everything but wifi isnt working. ive read a lot of peeps are having wifi probs. I have a xda link for my exact device and you guys tell me wut the hell im supposed to do. its got all kinds of stock roms and ota updats and stuff,... which one do i use wtf do i do. should i go one at a time from lowest to biggest, do i even need ota updates or w./e that is?!?!?!? please help guys my chirstmas is becoming a nightmare... its my only internet source.. i had to come all the way to the dang library for this crap.. please help!!!!! heres the link that might give u guys an idea on how to help.. heres the stock roms and stuff
http://forum.xda-developers.com/wiki/Fuhu_nabi_2 thank you!!!!!
Click to expand...
Click to collapse
Thought I would share some info I found when I ran into the wifi problem on my daughter's nabi. I did some searches on the internet and the typical answer I found for solving the wifi issue was "reset the device" or "unroot and return to stock rom - flash all updates and reroot". Being a glutton for punishment, and the fact I didn't want to reset the device, I searched and searched and was able to fix my daughter's wifi without doing a reset or unroot/reroot. Before I get into it I wanted to mention that wifi failures can happen for a number of reasons so while this worked for myself, it may not work for you.
Some prerequisites:
Most importantly; you need a rooted device. If you do not have root access you will not be able to write files or access the commands to fix the issue I am about to outline.
Some knowledge of linux would be helpful, but not necessarily required.
Lets get started:
Warning! It goes without saying but I will say it anyways - you can mess up your nabi by rooting it. Some of the commands below could mess up your nabi bad. If this scares you then you probably should not proceed any further. I am not responsible for any damage you do to your nabi.
Commands are listed between ' and ' - do not use the ' when inputing the commands.
Note: The first two/three steps are not necessary but they do give you insight as to how I was able to determine my problem. If following this doesn't fix the problem for you the logcat output may give you some important info that you can google that may help you fix your particular problem.
Note: Steps 5 and on can be skipped if you have a text editor (vi or nano) on your device. If you have a text editor loaded simply edit the conf file directly.
1. You will need to run the command 'adb logcat' in a command-line window and in your appropriate directory. Adb is available as part of the android sdk but can also be found stand alone since most people do not need the sdk.
2. Try to turn on the wifi. You should see the output of your adb logcat window scroll some data. If the wifi is not attempting to turn on at all sometimes you can move between the settings options then go back to the wifi settings and move the slider. If you cannot get your wifi to turn on you can scroll the window up and attmept to find the data from when the device started up. In the output you should see lines that talk about wlan0 and probably something that says "failed" somewhere. In my case I could see where the wlan0 enabled but then a few lines down it said something about "Line: 25 failed" and "failed to parse file".
3. The file is actually a configuration file used by the wifi kernal module/driver. In my case this file had become corrupted.
4. Set adb in root mode (won't work if the device does not have root access) by running 'adb root' at the command-line. You may need to click on an "allow root permission" window on the actual device after running this command.
5. Run 'adb pull /data/misc/wifi/wpa_supplicant.conf' from command-line. If this does not work then do the following:
a. Run 'adb shell' from command line.
b. 'su'
c. 'cat /data/misc/wifi/wpa_supplicant.conf' - copy the output from the command and paste into a text editor (see note in step 6 on why NOT to use notepad).
d. Save the file as wpa_supplicant.conf, preferrably in the same diretory as adb.
e. 'exit' twice should exit you from the adb shell and return you to your command-line. If all else failes a "ctrl-c" should drop you out of adb.
6. Use a text editor to open wpa_supplicant.conf. The file should be located int he same directory as adb. If you are using Windows I would strongly suggest you NOT use notepad. Notepad will typically change all the EOLs (End Of Line) from \n to \r\n which will really mess things up worse.
7. In the file you should see "network={" entries. There maybe one entry, there maybe many entries. You can remove all lines between "network={" and "}" including the latter themselves. If you see your 'home' network listed you can leave it as the only entry and make sure its priority is set to 1 but it maybe better to remove it as well just in case it contains part of the corrupted data.
8. Save the file.
9. Do 'adb push wpa_supplicant.conf /data/misc/wifi/wpa_supplicant.conf' from command-line. If this does not work then do the following:
a. Run 'adb push wpa_supplicant.conf /sdcard/wpa_supplicant.conf' from command-line.
b. Run 'adb shell'
c. 'su'
d. 'dd if=/sdcard/wpa_supplicant.conf of=/data/misc/wifi/wpa_supplicant.conf'
e. Do 'exit' twice to exit the adb shell. If all else fails then a "ctrl-c" should drop you ot of adb.
10. If the wpa_supplicant file was corrupted then the wifi should now be able to enable and you should now be able to connect to a network.
I hope this is helpful to at least a few people.
Sony Xperia Z2 D6503 Marshmallow (6.0.1) Build 23.5.A.1.291 - Unlocked using This solution.
I am quite new to flashing phones. I have done it in the past but it was a great deal easier back when I last did it at the dawn of Android.
My issue is simply, I want to stop my supplier (Three) from being able to differentiate between my phone downloading data and when I tether it to something. I had unlimited data but a limitation on tethering which I thought was a bit sneaky and crap. So, after rooting my phone successfully, what else will I need to do in order to stop Three from snooping and differentiating my traffic?
Thank you all in advance for your help.
This is not a device-orientated question, in fact you should ask this question in the General or Q&A forum so that more professionals from all the brands can help you out.
P's make sure you have read and understand the forum rules Statement 6,
...nor do we permit members to request, post, promote or describe ways in which warez, cracks, serial codes or other means of avoiding payment, can be obtained or used...
Click to expand...
Click to collapse
What you have requested here have given me a feel of violating the forum rules.
Try this:
http://nexus5.wonderhowto.com/how-to/tether-your-nexus-5-without-your-carrier-knowing-0155546/
Dunno if it will work on your device, be sure to backup before fiddling with system files...
Knutselmaaster said:
Try this:
http://nexus5.wonderhowto.com/how-to/tether-your-nexus-5-without-your-carrier-knowing-0155546/
Dunno if it will work on your device, be sure to backup before fiddling with system files...
Click to expand...
Click to collapse
Thanks dude, but there was no database file in the specified folder.
Then you should try to find where Sony puts that file. Have you tried using the search function of your file explorer to see if it exists in other places?
Knutselmaaster said:
Then you should try to find where Sony puts that file. Have you tried using the search function of your file explorer to see if it exists in other places?
Click to expand...
Click to collapse
I have now and found a file with the same name but it doesn't contain the same data. It was found in a completely different folder within the data, data subfolders.
As in there is no "global" subsection.
I have found a solution.
Open a command prompt
Run ABD (Browse to folder, by default cd c:\abd\ and then type ABD shell)
At the prompt type: settings put global tether_dun_required 0
hit enter.
Type exit and hit enter.
This was you don't have to edit database files you use the shell to make the change which is a far safer way forward anyway.
Restart your phone. Viola.
Solution found here; http://www.lukecjdavis.com/fix-internet-tethering-on-lollipop-xperia-z3-plus-other-android-devices/
That is great news, thank you for sharing the solution.
Following the instructions from this post (except don't rebook at the end) https://forum.xda-developers.com/showpost.php?p=61736387&postcount=15 I was able to successfully tether on the LG G6 h871. The data flows from phone to whatever wifi device smoothly.
The thing I'm still working on is that the changes don't persist if the phone turns off. The settings reset when the phone is restarted. Anyone know how to make the changes stick?
Thanks!
Here's a brief update.
You can actually make these settings from within your phone, instead of through the ADB command, which is useful in case you suffer an inadvertant reboot while in the field. Still haven't been able to make the settings persist through reboot however.
Taken from here https://forum.xda-developers.com/att-lg-v10/help/activate-hotspot-unlocked-lg-v10-t3585697
You use the Settings Database Editor and find these entries in there (you have to find the one in both the System and Global tables).
The setting in Global table "tether_dun_required 0" is protected and won't let you edit it.
You can change this using ADB, and fortunately granting these permissions is a one time process that does persist through normal reboots. https://forum.xda-developers.com/tm...settings-database-editor-tweaks-t3609876/amp/
"adb shell"
"pm grant by4a.setedit22 android.permission.WRITE_SECURE_SETTINGS" (check this command against the text the app pops up when you try to change the protected setting)
"reboot"
Now you are able to go into the Settings Database Editor app and modify these two settings
Global table "tether_dun_required 0"
System table "tether_entitlement_check_state 0"
And viola you will have a working wifi hotspot on your unrooted stock phone. Hopefully I can figure out a way to make these changes stick through reboots though, because it is a bit of a hassle to click through the app anytime it reboots, but at least it works, and it's certainly better than the popping out your sim card trick and trying to time shoving it back in just at the right moment during the wifi hotspot creation trick.
I used to use this trick but tried the other day and while I was able to connect to the hotspot I could not get internet on any device. Anyone else notice this.
Is this issue specific to the h871 / AT&T? On h870 (carrier free) you can just enable it in settings...
Worked very well for me, thanks! Did you get around these settings stick after reboot?