Hello guys , i will try to be as brief as possible.
I unlocked the bootloader (officialy) , rooted , twrp , epic rom , flashed zetsubou kernel , installed nethunter app , installed chroot ,then kali.
Now when i boot terminal and plug in wifi card (tp link wn727n) led is glowing, dmesg shows device ,but ifconfig doesnt recognise wlan1.There is no Isusb command despite that usbutils installed.What is wrong?Also this cards works on pc well.How can i fix it?
Thank you.
did you install modules? kmodmanager?
Related
LG L5 (E610 )
Windows 8 x64
oryginall usb cable
Hello,
When I was flashing my phone yesterday, something went wrong, and my phone isn't working very well(i guess ). So, i have had Android 4.1.2 on stock non-brand ROM. I've decided ,that i will upgrade it to CM 10 , which has nightly builds. There were no errors during instalation and after reboot i have seen my CM ROM working. BUT, i haven't got any GSM connection, and phone was saying, that "there were errors on refreshing networks list" or smth similiar. I've decided to install baseband switcher from L7 device ( i know, stupid decision .. ) in recovery . I did it, and after reboot i got stripes on my screen. I thinked, that it's bricked, but when I plugged in USB cable to my computer, android boots and , have normal desktop with all features enabld, BUT i don't have ability to go to Emergency mode or Recovery mode ( stripes, stripes everywhere ) . What shall i do, is there a small chance to restore my phone from adb in eclipse, or smth ?
rybczyns said:
LG L5 (E610 )
Windows 8 x64
oryginall usb cable
Hello,
When I was flashing my phone yesterday, something went wrong, and my phone isn't working very well(i guess ). So, i have had Android 4.1.2 on stock non-brand ROM. I've decided ,that i will upgrade it to CM 10 , which has nightly builds. There were no errors during instalation and after reboot i have seen my CM ROM working. BUT, i haven't got any GSM connection, and phone was saying, that "there were errors on refreshing networks list" or smth similiar. I've decided to install baseband switcher from L7 device ( i know, stupid decision .. ) in recovery . I did it, and after reboot i got stripes on my screen. I thinked, that it's bricked, but when I plugged in USB cable to my computer, android boots and , have normal desktop with all features enabld, BUT i don't have ability to go to Emergency mode or Recovery mode ( stripes, stripes everywhere ) . What shall i do, is there a small chance to restore my phone from adb in eclipse, or smth ?
Click to expand...
Click to collapse
My friend Eclipse is used to build android apps,in our case(Eclipse application is a plug-in that creates an extension for the extension point,to create applications in java form)... http://wiki.eclipse.org/FAQ_What_is_an_Eclipse_application?
As for the bricked phone,its not bricked if it comes on,its called a soft brick and can be fixed by reinstalling a recovery,then a rom that is compatible with your phone.
Diablo 7 is right as your phone is booting up then you are having soft brick it happens to lot of people what you have to do is just flash custom recovery through pc and look for some compatible rom and flash it via recovery
Total brick means it will not boot up it cannot be detected by USB it's boot got corrupt
Sent from my LG-P765 using xda app-developers app
Ok, thanks for your reply. The thing is, I can't go to recovery or emergency mode, so I think, that i can't use flash tool. What kind of tools, do you mean, which can help me?
EDIT:
Ok, i got it works, First I uninstalled all drivers from my OS, then installed it again from LGMobileSupportTool and using Emergency System Recovery make it works. I'm glad to have Android 4.1.2
Thanks for your replies.
How to do it?
I have the same problem. Can you give me a step-by-step method on how to do it. Thank you very much?
So,I decided to download a bunch of xposed modules on my generic tablet and i used the APM+ module and rebooted into the bootloader.However it is stuck at boot and i cant do anything.I already drained the battery and still it doesnt even go to thr lock screen.I also tryed to hold the power button down but same thing.I have the firmware for it but i dont want to lose everything on my tablet.I dont remember what modules i installed but i think it was a adblocker,a lucky patcher xposed module,apm module,and thats about it.I tryed connecting it to a pc and installing adb drivers but in adb theres no devices.Its a quad core a33 tablet created by IRULU it has 16gb of storage and 400mb ram.It was rooted with kingroot using dragonface with is a custom rom creator for windows.The tablet has the lastest version of busybox and adb was activated before this happened.I also gave adb root permissions in kingroot.The tablets is a couple months old.Its a IRULU x7 tablet with no bluetooth or g-sensor.It has 2 cameras.No custom recovery.I dot have any mods on its except for xposed.Its is andriod 4.4.2 kitkat OS.Which has volume buttons.Can anyone help me.Thank you.Let me know if i need more info.[emoji2] by the way i think i activated about 6 xposed modules all at once[emoji12]The bootloader is locked since it is a custom rom.I just injected su files into the system root.
Guys plz help me out plz anything.Say something.......I really need help
FIRST VOTE IN POLL BECOME LARGE POLL ALSO HELP FOR XOLO USERS AND LITTLE THANK FOR ME
WORKING HARD ON DEVICES
send me some thank paypal.me/aarushdhama
ROOT
you can root now
But only by pc ADB fastboot
Requirements
1.recovery https://drive.google.com/file/d/0B_cfID200f6QeF8tbU45aGJLcW8/view
2.supersu beta ( download only my SuperSU any other may be bootloop )
3.driver sprd
4.disable pc signature
5.USB cable
Download all files link in download section
**Instructions
FOR BETTER VIDEO TUTORIAL
LINK- https://youtu.be/kQ5PGaQKHfU
1. Disable pc driver signature (search on Google its easy )
2. Connect phone to pc and set media device to CD option
And copy files means driver files
Install driver now x64 for 64 bit and x86 for 32 bit
Make sure ist disable driver signature​... otherwise you can't install drivers and without driver no root
3. Enable OEM unlocking and USB debugging
(Go to about tap 8 times on build no. Then you see a option developer option then open and click )
4.copy SuperSU file to phone
5. Recovery (universal) clockworkmod
In pc
6. And you also need a folder which are created in C drive window drive ADB& fastboot
7.copy recovery file name (clockworkmod) to ADB folder and
8. Now connect phone by USB cable
Now go to folder adb and click shift+right click then a option see in list open command prompt here then click it
9. Now you see a cmd option and write
Adb devices. -hit enter
Then you see a popup in phone make sure don't lock your phone your phone display always on
And click on always option in phone and hit allow to option in phone
Now again write "adb devices"
Now you see a device
With some id - device
Now mean your phone connect by adb
10. Now write
Adb reboot bootloader - hit enter
Now your phone go to the fastboot mode
Does not do anything with phone
11. Write now
Fastboot flash recovery clockworkmod.img -hit enter
Now some data you see and ok flashed complete like this
Now disconnect your phone take down battery and and re insult battery and power on by pressing
Volume up (+) power make sure one time
And after some time you see a logo of xolo
And power key left but Don't left volume up key
When you see a recovery option go to update from sd card)internal
Flash SuperSU.zip file
Now reboot and enjoy your rooted xolo era 1X
CUSTOM ROM- cm13 is on the beta version
CM 13 FOR ERA4G/era1x/erax BETA VERSION MAYBE WORK ON ERA X (NOT TESTED) BY MURALIVIJAY AND SUMIT DEV
THIS ROM NOT FULLY WORKING BUGLESS ROM.. UNDER BETA TESTING PROCESSS....... SO IT HAVE BUG AND SORRY FOR MY BAD ENGLISH
WHATS NEW ?
1)FIXED WIFI AND BLUTOOTH
2)FIXED BACKLIGHTING
3)FIXED SENSOR
WHATS NOW WORKING ?
1)WIFI
2)BLUETOOTH
3)GPS
4)CAMERA
5)PRE ROOTED
6)SUPPORT MULTIWINDOW
7)APPS CAN,T LAG RUNNING SMOOTHLY
BUGS :
1)RIL NOT WORKING
2)NO SIM DETECTION (MAIN BUG)
3)AUDIO NOT WORKING
4)SDCARD MOUNTING PROBLEM
5)OPTION NAVIGATION NOT WORKING
HOW TO FLASH ?
(MAKE SURE TAKE BACKUP OF YOUR STOCK ROM USING TWRP)
1)DISBLE DRIVER SIGNATURE VERIFICATION ON YOUR PC
2)RUN "RESEARSCH DOWNLOAD" AS ADMIN
3)LOAD "S204 PAC FIRMWARE"
4)GOTO PARTITION TAP UNSELECT ALL PARTITION EXCEPT FDL1,FDL2
5)NOW LOCATE BOOT AS "BOOT.IMG" FILE SYSTEM AS "SYSTEM.IMG" AND USERDATA DON,T LOCATE ANYTHING THEN CHECK THIS THREE PARTITION
6)REMOVE DEVICE BATTERY PLAY THE FLASH BUTTON THEN FLASH IT
7)PUT BACK BATTERY AGAIN POWER ON NOW CM LOGO WILL APPER WAIT FOR 5MIN TO TAKE FIRST BOOT
(IAM NOT RESPANSABLE IF YOUR GET HARD BRICK AND DAMAGE .. )
(NOTE FOR DEVELOPERS)
i,m hardly tried to fix the bug but unable to fix it... because selunux is (enforce mode) blocking (avc) "rild_sp" socket so .. ril receiver couldn,t find
rild socket .. so we need our device kernel code to fix selinux.. but some after days iam tried new method to bypasss selinux mode by su.d ..it was changed
selinux mode into "permissive mode"..and modem socket connected but bad luck it can,t sim cards .. because iam used samsung device ril to build this rom..
but im take second log again it could,t find "rild2" socket ..i don,t know why its again come ramdisk is ok .. first socket connected .. second socket socket trying to connect ...
so this is very big problem in our device .. any expert sprd developers try to fix it ..
Device tree http://github.com/era4g
any developers can fix those below bugs in future .. in my knowlege iam fixed but some other unable to fix ,, if any developers fixed this bugs please
kindly mail me [email protected] also iam here in hangouts .. Thanks i hope you will this ****s : D
ROM URL DOWNLOAD LINK CM13
https://drive.google.com/file/d/0B7rWS2FCs7IBWURHdDZtdFQwcWc/view
RECOVERY-twrp recovery flash it by flashify after root but this recovery have touch issue but working great for backup/restore /flash anything
for problem fix watch this video
https://www.youtube.com/watch?v=uW6g5Hl03Ks&t=3s
reserved-------:good::fingers-crossed:
Please help anyone port any rom for xolo users twrp available , cm beta version also
Is this rom will work in xolo era 1x ?
please help me bhai how to revert this boot screen something happened and then it is asking me to allow or read only but when i press it it wont register pls help fast bhai
sharvaj said:
please help me bhai how to revert this boot screen something happened and then it is asking me to allow or read only but when i press it it wont register pls help fast bhai
Click to expand...
Click to collapse
have u flash the rom in xolo era 1x ?
bravolol said:
have u flash the rom in xolo era 1x ?
Click to expand...
Click to collapse
Yes i did and now im using that recovery with touch issues and bcoz of that cant do anything pls help, also, i cant boot into system anymore (i got myself into a bootloop?)
Awesome.....!
Took a bit of work around to get this done.
I was confused with your Youtube video. Still Didn't understand why you have booted boot.img and if it was important why wasn't that provided in the download links.
But, You XDA Thread is perfectly descriptive.
Intially, the TWRP didn't boot. But, Once I removed the Battery and reinserted it, everything worked fine.
Thank you for the Thread. Learn't a bit about Android root.
:good::good::good:
---------- Post added at 02:06 AM ---------- Previous post was at 01:42 AM ----------
bunty5555 said:
Please help anyone port any rom for xolo users twrp available , cm beta version also
Click to expand...
Click to collapse
Did you find any custom ROM's???
root successful
rooted my phone using the provided recovery and Supersu.
Try this for rill fixing
Use rill files from ur stock rom dont use from Samsung, but use rill.java of Samsung for building rill, and i saw ur device tree n vendor tree, there was a very main file missing which is required for rill, /bin/cp-diskserver (its very important for rill)
And one more thing you forgot to add this code in build.prop... I saw that u used sc7731c.java rill for telephony.jar so u have to put this in build prop
ro.telephony.ril_class=SC7730CRIL
ro.telephony.prop_class=SC7730CRIL$TelephonyPropertyProvider
Sorry for my bad English i hope u understand
Sent from my [device_name] using XDA-Developers Legacy app
Anyway to fix imei on xolo era 1x .please help me.
Recovery file doesn't exist, please someone share the recovery file to root.
stock rom link for Xolo era 1x pro, or any custom ROM link
Phone bricked
Any help, only cyanogen recovery I can access
amit020 said:
stock rom link for Xolo era 1x pro, or any custom ROM link
Phone bricked
Any help, only cyanogen recovery I can access
Click to expand...
Click to collapse
how did you root it?
Hello to all, as the title says i need help to meka a joystick to work on my android. Here are the facts that I have:
-The joystick is detected in my android box as Dragonrise Vendor=0079 Product=0006
-The stick does not respond in android, I used Keytest and nothing shows there.
-I have searched a lot, and I think the method is to compile one module to allow android to use it, but not sure about it.
-Device is rooted
-I tryed to install some zip modules I have found on the internet, but I think they where for other kernel versions and they do not work. I used flash Gordon, and other module installer without recovery, as flashify.
-I don't know anything about programming or compilling (but I can try if it is easy and with some help).
-Android version is 4.4.2 Kitkat, kernel is 3.10.33
Thanks.
Hey fellow devs,
I wanted to know if there is any way i can install a custom module to my android's kernel.
I tried using "insmod" command on my androidsu terminal but got an error "missing required keys" i guess it has something to do with secure boot but my bootloader is already unlocked and my device is rooted. Im currently using a redmi y2 (s2) and i wish to use a wireless adaptor with mt7601 chipset. Is there anyway i can do this without building the whole kernel?
Also i have kali nethunter installed in my device.
Please respond asap