Can I Unlock Bootloader and Install TWRP (ZCX~TWRP) On Stable ROM Kenzo 32GB v8.0.6. I've Obtained Permission and downloaded the required files ( ZCX TWRP ,Mi flash and Xiaomi drivers ) Please answer the questions below
1.Can I Unlock Bootloader on Stable ROM ?
2.Unlocking bootloader means I will loose all data right?
3.can I directly flash ZCX TWRP after unlocking bootloader ?
I couldnt unlock it on stable, but no harm if you try
Unlocking doesnt mean you will lose data, you lose nothing
You can flash after unlockibg bootloader.
And you can unlock it as many times you need (it gets locked if you flash MIUI again or if you switch MIUI android version..
redminote3 said:
I couldnt unlock it on stable, but no harm if you try
Unlocking doesnt mean you will lose data, you lose nothing
You can flash after unlockibg bootloader.
And you can unlock it as many times you need (it gets locked if you flash MIUI again or if you switch MIUI android version..
Click to expand...
Click to collapse
I want to install TWRP and if I [ Can I ] flash MIUI developer ROM from TWRP ( full rom) the bootloader will be locked again
redminote3 said:
I couldnt unlock it on stable, but no harm if you try
Unlocking doesnt mean you will lose data, you lose nothing
You can flash after unlockibg bootloader.
And you can unlock it as many times you need (it gets locked if you flash MIUI again or if you switch MIUI android version..
Click to expand...
Click to collapse
Thanks for your reply
Sampath521 said:
Can I Unlock Bootloader and Install TWRP (ZCX~TWRP) On Stable ROM Kenzo 32GB v8.0.6. I've Obtained Permission and downloaded the required files ( ZCX TWRP ,Mi flash and Xiaomi drivers ) Please answer the questions below
1.Can I Unlock Bootloader on Stable ROM ?
2.Unlocking bootloader means I will loose all data right?
3.can I directly flash ZCX TWRP after unlocking bootloader ?
Click to expand...
Click to collapse
1. try it, somebody able to unlock at stable rom while i can't do it with stable rom. moved to dev rom, and unlock successfully
2. nope, your data will remain untouch
3. yes...dont forget to reboot directly to twrp afterward to disable dm-verity.
abihary said:
1. try it, somebody able to unlock at stable rom while i can't do it with stable rom. moved to dev rom, and unlock successfully
2. nope, your data will remain untouch
3. yes...dont forget to reboot directly to twrp afterward to disable dm-verity.
Click to expand...
Click to collapse
How did you move to Developer ROM my purpose for unlocking bootloader is to move into developer ROM please please tell me how to Move into developer ROM please???[emoji122] [emoji122]
Sampath521 said:
How did you move to Developer ROM my purpose for unlocking bootloader is to move into developer ROM please please tell me how to Move into developer ROM please[emoji122] [emoji122]
Click to expand...
Click to collapse
if only move to developer ROM, you don't need to unlock first. you can directly move to dev rom using miflash.
all you need available here.
miflash --> MIUI ROM Flashing Tool (Size: 31MB)
fastboot ROM --> Redmi Note 3 Qualcomm Latest Global Developer Version Fastboot File Download
abihary said:
if only move to developer ROM, you don't need to unlock first. you can directly move to dev rom using miflash.
all you need available here.
miflash --> MIUI ROM Flashing Tool (Size: 31MB)
fastboot ROM --> Redmi Note 3 Qualcomm Latest Global Developer Version Fastboot File Download
Click to expand...
Click to collapse
If I run mi flash.msi it opens Firefox and I can't get drivers for redmi note 3 please tell me the links and how to open MSI files
Sampath521 said:
If I run mi flash.msi it opens Firefox and I can't get drivers for redmi note 3 please tell me the links and how to open MSI files
Click to expand...
Click to collapse
*.msi is installer app file for windows. it should act as *.exe file. not really understand why it open firefox.
drivers for device,easiest way is install mi pc suite in your pc. googling it and you'll easily found it
abihary said:
*.msi is installer app file for windows. it should act as *.exe file. not really understand why it open firefox.
drivers for device,easiest way is install mi pc suite in your pc. googling it and you'll easily found it
Click to expand...
Click to collapse
I can't find it I found my but not Qualcomm Snapdragon please give me a link
Sampath521 said:
I can't find it I found my but not Qualcomm Snapdragon please give me a link
Click to expand...
Click to collapse
It's in the same link that @abihary has mentioned http://en.miui.com/a-234.html
I have attached a screenshot here...
I managed to unlock BL yesterday on 12 years old 32bit laptop with XP
I could only enter fastboot mode, so I installed old MiFlash;
http://bigota.d.miui.com/tools/MiPhone20151028.exe
Then I selected Drivers in that file to get ADB interface bootloader working, then I used MiUnlock and it went success
i didnt have my computer with 64bit win10 at hand where I have everything working tip top, so I tried that and it worked...maybe it can help someone too
Denis:) said:
I managed to unlock BL yesterday on 12 years old 32bit laptop with XP
I could only enter fastboot mode, so I installed old MiFlash;
http://bigota.d.miui.com/tools/MiPhone20151028.exe
Then I selected Drivers in that file to get ADB interface bootloader working, then I used MiUnlock and it went success
i didnt have my computer with 64bit win10 at hand where I have everything working tip top, so I tried that and it worked...maybe it can help someone too
Click to expand...
Click to collapse
you can use miflash 20160830 for 32 bit pc/laptop. i already try it using both 32 & 64 bit laptop
abihary said:
you can use miflash 20160830 for 32 bit pc/laptop. i already try it using both 32 & 64 bit laptop
Click to expand...
Click to collapse
It doesnt work on WinXP, but it works on 32bit Win7+
Related
Hi guys,
Just recently purchased redmi note 3 pro 32gb from gearbest.
Phone should be international version with 7.2.13.00(LHOCNCL) preinstalled.
I found that I cannot flash any standard / developer ROM when official website by using built-in flash tool.
Any way to go from here? to at least receive OTA updates and in future I will like to try out Ressurection rom.
thanks.
Your ROM is unexsisting one, cooked by the seller.
You must flash a new one clean via EDL mode and MiFlash
This CN in the name means Chinese, and the numbers says that the rom is only modified to support more languages.
pakudaboy said:
Hi guys,
Just recently purchased redmi note 3 pro 32gb from gearbest.
Phone should be international version with 7.2.13.00(LHOCNCL) preinstalled.
I found that I cannot flash any standard / developer ROM when official website by using built-in flash tool.
Any way to go from here? to at least receive OTA updates and in future I will like to try out Ressurection rom.
thanks.
Click to expand...
Click to collapse
Yes ^he^ is correct . Download a rom from the mi website . And then flash the rom using MiFlash tool . then you should be able install roms .
s-u-f-f-e-r said:
Your ROM is unexsisting one, cooked by the seller.
You must flash a new one clean via EDL mode and MiFlash
This CN in the name means Chinese, and the numbers says that the rom is only modified to support more languages.
Click to expand...
Click to collapse
thanks guys.
Does this mean i need to wait for unlock bootloader first?
my MI account has previous device linked which I just removed now and set to my new phone.
might take weeks to get approval?
or is there a guy to by pass the locked bootloader?
thanks.
pakudaboy said:
thanks guys.
Does this mean i need to wait for unlock bootloader first?
my MI account has previous device linked which I just removed now and set to my new phone.
might take weeks to get approval?
or is there a guy to by pass the locked bootloader?
thanks.
Click to expand...
Click to collapse
This procedure works on locked bootloader.
http://en.miui.com/thread-235865-1-1.html
s-u-f-f-e-r said:
This procedure works on locked bootloader.
http://en.miui.com/thread-235865-1-1.html
Click to expand...
Click to collapse
thanks so much for the info
will I lost my IMEI if I use miflash and choose FlashALL per that guide?
pakudaboy said:
thanks so much for the info
will I lost my IMEI if I use miflash and choose FlashALL per that guide?
Click to expand...
Click to collapse
No you wont loose your IMEI. Basically you are just flashing official MIUI Rom, your IMEI details are stored in another partition (non volatile) and FlashAll will not touch them.
You are safe to follow this guide, and by the way you would not be able to unlock the bootloader (the official way) from this vendor Rom. So if you plan to do so later, here you go with this first step.
gunmoule said:
No you wont loose your IMEI. Basically you are just flashing official MIUI Rom, your IMEI details are stored in another partition (non volatile) and FlashAll will not touch them.
You are safe to follow this guide, and by the way you would not be able to unlock the bootloader (the official way) from this vendor Rom. So if you plan to do so later, here you go with this first step.
Click to expand...
Click to collapse
thanks for ur info.
yeh, I tried to unlock it with official tool but kept failing.
I'll give that guide a show later when I'm home.
hopefully I don't brick my phone..lol
guide works great!
now i'm with global 7.3.7
is there a guide to flash TWRP with locked bootloader as well?
thanks!
pakudaboy said:
thanks for ur info.
yeh, I tried to unlock it with official tool but kept failing.
I'll give that guide a show later when I'm home.
hopefully I don't brick my phone..lol
Click to expand...
Click to collapse
Unlocking was successful only on dev rom in my case
pakudaboy said:
guide works great!
now i'm with global 7.3.7
is there a guide to flash TWRP with locked bootloader as well?
thanks!
Click to expand...
Click to collapse
Read up this thread: http://forum.xda-developers.com/redmi-note-3/how-to/guide-redmi-note-3-available-twrps-t3406708 , this: http://en.miui.com/thread-240531-1-1.html and this: http://en.miui.com/thread-296053-1-1.html
Sent from my Redmi Note 3 using Tapatalk
s-u-f-f-e-r said:
Unlocking was successful only on dev rom in my case
Click to expand...
Click to collapse
ok
i'm flashing dev ROM now.
going to try if i can unlock BL.
so there no way to install TWRP without unlock BL first?
my situation is bit messed up, because I had Redmi Note 2 linke to same mobile number.
so when I tried to unlock it it keeps saying "Couldn't verify device, Current accoutn is different from the account info on the device" but i'm 100% sure i'm using same account tho.
s-u-f-f-e-r said:
Unlocking was successful only on dev rom in my case
Click to expand...
Click to collapse
unlocked fine with Dev ROM!
sweet
now time to find out how to flash TWRP!
Put the recovery image file in the folder from Unlocker.
Press Shift and Right click with the mouse on the empty space in the folder.
In the context menu choose Open Command Window Here
Put the phone in fastboot mode
Write in the terminal
fastboot flash recovery and write down the name of the image. For example:
fastboot flash recovery twrp.img
or
fastboot flash recovery recovery.img
Success.
s-u-f-f-e-r said:
Put the recovery image file in the folder from Unlocker.
Press Shift and Right click with the mouse on the empty space in the folder.
In the context menu choose Open Command Window Here
Put the phone in fastboot mode
Write in the terminal
fastboot flash recovery and write down the name of the image. For example:
fastboot flash recovery twrp.img
or
fastboot flash recovery recovery.img
Success.
Click to expand...
Click to collapse
done.
TWRP flashed, but somehow lost wifi function in Dev Rom
going to try flash Resurrection over see if that fix it.
seems everything's working now with RR rom!
thanks so much for everyone's help especially s-u-f-f-e-r!
If I flash TWRP using this method:
http://forum.xda-developers.com/red...-to-flash-twrp-recovery-unlock-t3473294/page1
Will I be able to normally flash CM/MIUI roms without unlocking bootloader. My bootloader was never unlocked btw.
I dont care about OTA update, I never dirty flash. Always clean
@malimukk
Hi,
Of course you can do that, just read the second post of OP.
Thanks.
karkand said:
@malimukk
Hi,
Of course you can do that, just read the second post of OP.
Thanks.
Click to expand...
Click to collapse
Also flash kernels etc.?
I have seen some discussions about which TWRP to install. Alka or Cofface.. what would you recommend?
Thanks
i replaced the default recovery.img with twrp 3.0.2 (renamed and replaced as recovery.img)for redmi note 3.the phone flashed sucessfully but i cant enter into recovery mode.when i press "power+volume up" its showing to connect charger.even tried from the updator app but no use.any help !
superstar007 said:
i replaced the default recovery.img with twrp 3.0.2 (renamed and replaced as recovery.img)for redmi note 3.the phone flashed sucessfully but i cant enter into recovery mode.when i press "power+volume up" its showing to connect charger.even tried from the updator app but no use.any help !
Click to expand...
Click to collapse
Do you have an unlocked bootloader? You need to check in fastboot mode, by typing in fastboot oem device-info
you may have to boot straight to recovery, or the recovery image may get overwritten
my bootloader is locked.i think above method is for locked bootloader.right.i pressed power+volume up right after flashing(after disconnecting cable),phone showed mi logo and then after 5-6 seconds its showing to connect cable again. also when i use miflash tool to unlock bootloader.its not showing advanced menu in miflash tool.any solutionfor that too.my desktop is windows 7 32 bit os.do i need a 64 bit os to get all options in miflash tool.pls any solution.
Can anyone confirm the successful installation on Kenzo along with the step by step guide. And please let me know which fastboot rom should be used for fastboot flashing. Because we have 3 type of ROMs on Kenzo I.e. Global Stable, Global Developer or Chinese Developer rom. Please provide the step wise installation guide so that I can carry on
manudhomra said:
Can anyone confirm the successful installation on Kenzo along with the step by step guide. And please let me know which fastboot rom should be used for fastboot flashing. Because we have 3 type of ROMs on Kenzo I.e. Global Stable, Global Developer or Chinese Developer rom. Please provide the step wise installation guide so that I can carry on
Click to expand...
Click to collapse
I can't write you a detailed step-by-step guide because my English is not so perfect, but: you need to install the Global/Chinese Developer rom. Must be Developer rom, but you can choose which of them (Chinese or Global).
I made it with Global Developer, so I can confirm that this method perfectly works.
Luck!
Mononitoto said:
I can't write you a detailed step-by-step guide because my English is not so perfect, but: you need to install the Global/Chinese Developer rom. Must be Developer rom, but you can choose which of them (Chinese or Global).
I made it with Global Developer, so I can confirm that this method perfectly works.
Luck!
Click to expand...
Click to collapse
pls help
1.can i use official twrp version from there site or need any modded version
2.pls confirm i only have to replace "recovery.img" and no other system files
superstar007 said:
pls help
1.can i use official twrp version from there site or need any modded version
2.pls confirm i only have to replace "recovery.img" and no other system files
Click to expand...
Click to collapse
You need the modded version and yes, only have to replace that .img and no other.
Check this thread, is which I followed
http://forum.xda-developers.com/redmi-note-3/how-to/method-to-flash-twrp-recovery-unlock-t3473294
Mononitoto said:
You need the modded version and yes, only have to replace that .img and no other.
Check this thread, is which I followed
http://forum.xda-developers.com/redmi-note-3/how-to/method-to-flash-twrp-recovery-unlock-t3473294
Click to expand...
Click to collapse
thank you so much it worked perfectly.and i hope installing xposed framework wont be a problem in the future.
Hi guys,
first of all: I am an idiot
I was using an old nightly from CM 13-kenzo and decided to do some preparation to finally migrate to Lineage without data loss.
So I wanted to go to CM14.1 before flashing the experimental Lineage and the nightly.
What did I flash with TWRP?
1.) ROM: cm-14.1-20161225-NIGHTLY-kenzo.zip
2.) GAPPS 7.1 ARM64 micro
3.) Firmware: CM14.1-firmware_20161205.zip
I think I should have flashed the firmware first, moreover, I didn't wipe caches.
What's happening now?
Recovery mode does not work (the display just flash for half a second)
Booting does not work (ofc )
Fastboot mode still works.
How can I fix this nice problem with Cyanogenmod?
Any help is much appreciated.
Bro,I also faced this problem. Just go to guides section and follow the guide"install zcx twrp without unlocking bootlader" one. And flash by that method twrp and you will get it all back.
I have also faced problem same you are facing and solved it!!!
Btw. which recovery you used while installing this build?
ATG Droid said:
Btw. which recovery you used while installing this build?
Click to expand...
Click to collapse
Your bootloader is locked
Snooze4 said:
Hi guys,
first of all: I am an idiot
I was using an old nightly from CM 13-kenzo and decided to do some preparation to finally migrate to Lineage without data loss.
So I wanted to go to CM14.1 before flashing the experimental Lineage and the nightly.
What did I flash with TWRP?
1.) ROM: cm-14.1-20161225-NIGHTLY-kenzo.zip
2.) GAPPS 7.1 ARM64 micro
3.) Firmware: CM14.1-firmware_20161205.zip
I think I should have flashed the firmware first, moreover, I didn't wipe caches.
What's happening now?
Recovery mode does not work (the display just flash for half a second)
Booting does not work (ofc )
Fastboot mode still works.
How can I fix this nice problem with Cyanogenmod?
Any help is much appreciated.
Click to expand...
Click to collapse
. Your bootloader is lock, if you still can get to fastboot, then enter edl mode and use miflash to unlock yourboot loader again
Thx. Does Miflash work on a chromebook?
Mrxyzl said:
. Your bootloader is lock, if you still can get to fastboot, then enter edl mode and use miflash to unlock yourboot loader again
Click to expand...
Click to collapse
Do you mean the MiFlash Unlock tool? That doesn't work.
It's saying "Your device isn't supported by Mi Unlock" Go to .../unlock to apply for Mi Unlock support.
If you mean XiaomiMiFlash tool, what exactly do I have to flash?
Snooze4 said:
Do you mean the MiFlash Unlock tool? That doesn't work.
It's saying "Your device isn't supported by Mi Unlock" Go to .../unlock to apply for Mi Unlock support.
If you mean XiaomiMiFlash tool, what exactly do I have to flash?
Click to expand...
Click to collapse
Yes, I mean Miflash tool. You need to folow this guide
http://en.miui.com/thread-235865-1-1.html
And remember you will lost all data in internal memory, you will get back to MIUI with that guide. Then try to unlock your bootloader officially or unofficially again.
Or if you woud like to take risk then you can try this way https://forum.xda-developers.com/redmi-note-3/how-to/unlock-unofficially-install-zcx-twrp-t3586778 without data lost
Mrxyzl said:
Yes, I mean Miflash tool. You need to folow this guide
http://en.miui.com/thread-235865-1-1.html
And remember you will lost all data in internal memory, you will get back to MIUI with that guide. Then try to unlock your bootloader officially or unofficially again.
Or if you woud like to take risk then you can try this way https://forum.xda-developers.com/redmi-note-3/how-to/unlock-unofficially-install-zcx-twrp-t3586778 without data lost
Click to expand...
Click to collapse
Regarding your 2nd link:
now bring your phone in action and turn on oem unlock from developer optipn(tap miui version 7 time and find developer option in additional option)
sign out of your mi account
Click to expand...
Click to collapse
That would be the impossible part. So I guess I've to work with the first link. Thanks.
So if you damaged the recovery and your bootloader is locked theres no way to rescue this phone without a xiaomi shop but good luck
Okay problem solved. I used this guide https://forum.xda-developers.com/redmi-note-3/how-to/kate-guide-install-lineage-os-locked-t3546154 and it worked like a charm.
Thread can be closed.
Unlocking Bootloader1. Make sure you have a sim and active mobile data. Then go to about phone tap build number 7-8 times. After that go to advanced settings > developer options > turn on OEM unlocking and then check if this device is secure and click add account and device.
2. Download Mi unlock tool from here. Extract it and paste it in C:/unlock. or else your device won't be recognized for unlocking.
3. Open Mi unlock tool and then enter the Mi account which was on your device. Put your device in fastboot mode by pressing vol- and power and then connect to PC. Press unlock and if it tells you to wait you have no other option but to wait. If your mi flash tool shows connect your device even after you have connected it. Follow this guide here.
4. After you have unlocked your bootloader reboot your phone.
Flashing TWRP and Rooting via magisk
1. Download this TWRP image here. Thanks to the original developer mauronofrio.
2. Download adb and fastboot tools here and install it.
3. Now put your phone in fastboot mode and connect it with your pc. Now where you have downloaded the TWRP file rename it to TWRP.img and open a CMD window there if you don't know how just google.
4. Type the following commands
1. fastboot devices
2. fastboot flash recovery TWRP.img
3. fastboot reboot recovery.
Click to expand...
Click to collapse
5. Your phone will boot into TWRP now. But TWRP will be overwritten by stock miui recovery to stop that you need to flash Magisk. Download this zip move it to internal storage then flash by tapping on install and swipe to flash. Reboot your device. Reboot to recovery again to check if TWRP is present.
Now your device is rooted
OR
Flash latest OrangeFox Recovery if you don't want magisk.
Flashing A rom
1. Download.
2. Flash.
3 Format Data.
Done
Feel free to ask any questions. And don't point a finger at me for messing your device.
My mi unlock tool says can't get info. I using Indian version miui 12
Thanks for the useful guide. I have a quick question, does this works with MIUI 12?
igeekyayush said:
My mi unlock tool says can't get info. I using Indian version miui 12
Click to expand...
Click to collapse
Sorry for late reply. Have you installed the drivers correctly? Try using another port in your pc or use this mi unlock tool version zip
Doombuggie85 said:
Thanks for the useful guide. I have a quick question, does this works with MIUI 12?
Click to expand...
Click to collapse
Yes, it does.
hello,
thanks for the reply sir. yes i've tired changing port, pc everything. today i've factory reset my phone and added mi account and now i'm getting 7 days wait time. let's see now
LoadOP2 said:
Sorry for late reply. Have you installed the drivers correctly? Try using another port in your pc or use this mi unlock tool version zip
Click to expand...
Click to collapse
igeekyayush said:
hello,
thanks for the reply sir. yes i've tired changing port, pc everything. today i've factory reset my phone and added mi account and now i'm getting 7 days wait time. let's see now
Click to expand...
Click to collapse
Okay keep the sim inserted and use the device for 7 days. And if it doesn't work try using older version of unlock tool.
Hi there!
Silly question: is it possible to install TWRP but keep the official ROM? (phone is unlocked)
_benedict_ said:
Hi there!
Silly question: is it possible to install TWRP but keep the official ROM? (phone is unlocked)
Click to expand...
Click to collapse
Flashing a custom rom is optional. You don't NEED to flash a rom to get TWRP...
---------- Post added at 06:48 PM ---------- Previous post was at 06:46 PM ----------
I've unlocked the bootloader using the unlock tool and waited for 7 days,
But i rooted the device using a different method where i patched a boot.img and flashed that to the device.
Will this method still work for me as I'm already rooted but just want TWRP so i can flash other ROMs.. The post says you have to flash magisk from the (temporary) TWRP for the TWRP to stay as the recovery..
Will the magisk on my phone and the magisk installed here collide?
I just want TWRP so i can switch to a custom rom, so any input is appreciated!!
_benedict_ said:
Hi there!
Silly question: is it possible to install TWRP but keep the official ROM? (phone is unlocked)
Click to expand...
Click to collapse
Skip the flashing a rom part and you will be good to go.
But i rooted the device using a different method where i patched a boot.img and flashed that to the device.
Will this method still work for me as I'm already rooted but just want TWRP so i can flash other ROMs.. The post says you have to flash magisk from the (temporary) TWRP for the TWRP to stay as the recovery..
Will the magisk on my phone and the magisk installed here collide?
I just want TWRP so i can switch to a custom rom, so any input is appreciated!!
Click to expand...
Click to collapse
You can flash twrp and then check if it persists. If not flash magisk again their is no thing as magisk colliding lol. Just make sure you flash a newer version. And if nothing works flash stock rom and then twrp.
If you have the stock boot IMG flash it and then intsall twrp and magisk.
smsry said:
Flashing a custom rom is optional. You don't NEED to flash a rom to get TWRP...
Click to expand...
Click to collapse
LoadOP2 said:
Skip the flashing a rom part and you will be good to go.
Click to expand...
Click to collapse
Haha, makes sense! Thank you for your answers
Nevermind.. i got it to work pretty easily..
I have twrp on this device and Pixel Experience ROM and it's working all fine..
But there's this one thing where when booting to recovery, it asks me to input a password for User(0) when i try to input anything it says password failed..
From reading the log, it says it's for decrypting data(8f I'm not mistaken)
Is this important? Do i need to decrypt it?
Currently the ROM works fine with no errors, so I'm not gonna bother, but would still like to know what this "decrypting" thing is..
smsry said:
Nevermind.. i got it to work pretty easily..
I have twrp on this device and Pixel Experience ROM and it's working all fine..
But there's this one thing where when booting to recovery, it asks me to input a password for User(0) when i try to input anything it says password failed..
From reading the log, it says it's for decrypting data(8f I'm not mistaken)
Is this important? Do i need to decrypt it?
Currently the ROM works fine with no errors, so I'm not gonna bother, but would still like to know what this "decrypting" thing is..
Click to expand...
Click to collapse
Yes, If you use a lock screen enter that password it will be decrypted. You will have to format data if you decide to flash any other rom anyway.
flashed twrp but not able to boot into recovery.
igeekyayush said:
flashed twrp but not able to boot into recovery.
Click to expand...
Click to collapse
There can be many reasons for that. Please tell me the error or what's actually happening. Then only I can be of help.
Sir ive used xiaomi flashtool v2 after that and it worked. Thanks sir. After that i updated to latest twrp from that chinese one.
LoadOP2 said:
There can be many reasons for that. Please tell me the error or what's actually happening. Then only I can be of help.
Click to expand...
Click to collapse
Joyeuse
Hello, Does it work for Joyeuse (European version)?
The name of TWRP says Curtana -Unified
rfguy said:
Hello, Does it work for Joyeuse (European version)?
The name of TWRP says Curtana -Unified
Click to expand...
Click to collapse
Yes Unified means all Snapdragon 720g Devices which include Joyeuse, Curtana, Gram, Excalibur.
Hey buddy, thank you for this quick step-by-step guide. I flash ROMs since 2012 and you know what? It helped me the same. Having all stuff needed for go from stock to custom concentrated in one place (plus some useful tip like the Magisk flash at the end) it's always useful and time-saving. Thank you
2 Micro-notes about fastboot btw:
- write 'fastboot (with lowered 'f'): it may confuse some newbie
- it's 'reboot' instead of 'boot'
Hi, I'm trying to update my MIUI version to MIUI 13 however nothing is working, I am aware I've got a locked bootloader which is why I'm only trying to update via the Updated in Settings an odd thing is that my MIUI version is different from any version I've seen downloadable.
My version is RJBEUSF
EEA version is RJBEUXM
What to do?
Thanks
monarchgaming_ said:
Hi, I'm trying to update my MIUI version to MIUI 13 however nothing is working, I am aware I've got a locked bootloader which is why I'm only trying to update via the Updated in Settings an odd thing is that my MIUI version is different from any version I've seen downloadable.
My version is RJBEUSF
EEA version is RJBEUXM
What to do?
Thanks
Click to expand...
Click to collapse
if you can't update via settings
reset device and try again if fail
then bootloader should be unlocked to try the 2nd official way
unlock bootloader with "mi unlock" on any pc or laptop
then download your desired ROM and flash it with "mi flash"
you can also relock bootloader again while flashing with mi flash
mong786 said:
if you can't update via settings
reset device and try again if fail
then bootloader should be unlocked to try the 2nd official way
unlock bootloader with "mi unlock" on any pc or laptop
then download your desired ROM and flash it with "mi flash"
you can also relock bootloader again while flashing with mi flash
Click to expand...
Click to collapse
If I want to relock bootloader do I need my specific device's MIUI ROM? I'm trying to download it via the Settings but I think it's a "carrier" based MIUI rom and it's really limiting.
Only reason that I would want this is for resell value. Easier to sell a stock device than an open bootloader one.
Thanks btw for answering.
monarchgaming_ said:
If I want to relock bootloader do I need my specific device's MIUI ROM? I'm trying to download it via the Settings but I think it's a "carrier" based MIUI rom and it's really limiting.
Only reason that I would want this is for resell value. Easier to sell a stock device than an open bootloader one.
Thanks btw for answering.
Click to expand...
Click to collapse
you can only flash with pc or laptop following way
requirements
1.pc/laptop with adb drivers
2.unlocked bootloader device
yes you need fastboot rom flashing with "mi flash" to relock the bootloader
Official Roms for Mi10 (UMI) you can download from here and select fastboot while downloading not recovery rom
extract downloaded rom in c drive
download latest mi flash and extract this in c drive also
run mi flash select rom, attach your device in fastboot mode by pressing vol down + power down
and hit flash button, attaching screen shot also
hope this will help
i have same device, and this mi flash version worked good for me (MiFlash 2021.2.26.0)
i was getting problems with latest version
mong786 said:
you can only flash with pc or laptop following way
requirements
1.pc/laptop with adb drivers
2.unlocked bootloader device
yes you need fastboot rom flashing with "mi flash" to relock the bootloader
Official Roms for Mi10 (UMI) you can download from here and select fastboot while downloading not recovery rom
extract downloaded rom in c drive
download latest mi flash and extract this in c drive also
run mi flash select rom, attach your device in fastboot mode by pressing vol down + power down
and hit flash button, attaching screen shot also
hope this will help
i have same device, and this mi flash version worked good for me (MiFlash 2021.2.26.0)
i was getting problems with latest version
Click to expand...
Click to collapse
Thank you. Will try once it lets me unlock bootloader as currently I'm still 120hours away.