Hello,
I have a big issue with my tablet I've been trying to solve for days .
I have accidentally deleted the OS and the only way to fix this is by flashing the original firmware.
However, the problem is that I can't find the original firmware for my device on the internet and the only thing I have managed to find is firmware on Huawei website for FDR-A01L but that is a different model and not the one I am using (I am looking for a firmware for FDR-A01W version of Mediapad T2).
Any idea how I might solve this or where to find the firmware? :crying:
EDIT:
Firmware has been found and link has been posted inside txt file since I don't have rights to post external links yet (model FDR-A01W only!)
Password: rvVusc
same problem here
I have finally found a stock firmware someone has uploaded on the internet and solved the problem .
For those who are still searching for the firmware, I will upload and attach it in the first post.
asablic said:
I have finally found a stock firmware someone has uploaded on the internet and solved the problem .
For those who are still searching for the firmware, I will upload and attach it in the first post.
Click to expand...
Click to collapse
Thanks for sharing. What method did you use to root the tablet? I have the same one. I'd like to avoid unlocking the bootloader if possible, but I will do it if I have no other alternative. i hope your tabled it working again
bisbal said:
Thanks for sharing. What method did you use to root the tablet? I have the same one. I'd like to avoid unlocking the bootloader if possible, but I will do it if I have no other alternative. i hope your tabled it working again
Click to expand...
Click to collapse
Since unlocking bootloader is needed for flashing custom ROM's, I don't think you have to unlock it because you are flashing stock rom but I am not completely sure.
As for rooting, I have found some german website with the instructions on how to root the tablet and install twrp (experimental version).
If you don't understand german, you can use a translator.
Thanks! I tried running TWRP without flashing but I didn't work, it looks like you have to unlock the bootloader
[email protected]:~/Downloads$ sudo fastboot boot TWRP_kiwi.img
downloading 'boot.img'...
OKAY [ 1.529s]
booting...
FAILED (remote: Command not allowed)
finished. total time: 1.530s
Any other ideas?
Cheers
Raul
Uh the password for the archive ?
The password is : "rvVusc"
FDR-A01w
Hello,
thanks for posted this firmware but can you tell me what is the Virion for this room
Huawei MediaPad T2 10.0 Pro qualcomm msm8939v2.mbn
i have Huawei MediaPad T2 10.0 Pro and it hard bricked now usb connection showing "qualcomm hs-usb diagnostics 9006" i cant flash it becouse qualcomm msm8939v2.mbn cant find in internet. enyone have EMMC raw dump or full flash files.
thanks!!
Related
hello
my tablet is bricked i need to flash it but i cant seem to find the rom for it or some download link can some 1 please help me ?
firmware
ssj3g0ku said:
hello
my tablet is bricked i need to flash it but i cant seem to find the rom for it or some download link can some 1 please help me ?
Click to expand...
Click to collapse
hey guys, new to this, just got a MP720, not much firmware about for this one, not must of anything really,
I did however find this site with links to the to original firmware from MPMAN,
using google translate haha, it seems the two flavours of chipset for this taplet,
Hynix NAND firmware:
https://dl.dropbox.com/u/29403117/MP720 An 2.3_Hynix.rar
Micron NAND firmware:
https://dl.dropbox.com/u/29403117/MP720 An 2.3_Micron.rar
Flash Tool:
https://dl.dropbox.com/u/29403117/upgrade tool and Introduction.rar
that said i have not tested these FW's and cant vouch for the safety of using them,
I'm not a developer but hopefully they could be usefull for making a cyanogenmod for it (fingers crossed haha) or some one who has bricked there tap,
source:
https://slo-tech.com/forum/t528078
I have downloaded these files so if the link becomes dead please let me know and i will send them
Hello
I've got an Android TV Box from China. It’s an OEM device sold under the name MK805. The exterior is similar to the Mini X box, but inside is very different. It has Allwinner A10S (not A10) processor.
I bricked it while changing some files, and searched for original firmware everywhere in Internet with no results. So I tried to load firmware I found for other A10S devices (MK802+). It works, but only HDMI output. When I connect AV TVout I can only see a portion of black and white desktop. I've tried to configure different display options on section [disp_init], os script.bin file, in bootloder. At least 10 custom images without success.
I know it's very hard to find original firmware but, does anybody knows where download it?. Has anybody got this device and could dump its rom?.
Thanks in advance.
ouch! u should have backed up rom before fiddling with it hmmmm...?
azua_23 said:
Hello
I've got an Android TV Box from China. It’s an OEM device sold under the name MK805. The exterior is similar to the Mini X box, but inside is very different. It has Allwinner A10S (not A10) processor.
I bricked it while changing some files, and searched for original firmware everywhere in Internet with no results. So I tried to load firmware I found for other A10S devices (MK802+). It works, but only HDMI output. When I connect AV TVout I can only see a portion of black and white desktop. I've tried to configure different display options on section [disp_init], os script.bin file, in bootloder. At least 10 custom images without success.
I know it's very hard to find original firmware but, does anybody knows where download it?. Has anybody got this device and could dump its rom?.
Thanks in advance.
Click to expand...
Click to collapse
Did you tired the roms from http://www.minxand.com ?
Thnaks for your answers.
Yes, I should have dumped rom before. But I didn't :crying: I'm too brave (or senseless). Now it's too late to regret.
Roms from miniand.com don't work. All of them are for A10 processors
I hope someone has this device and help me. Meanwhile, I'll continue testing changes in bootloader.
Try this link https://disk.yandex.ua/public/?hash=4x4BjOS89LLGJSvGkbA94ze5p1xzlbkWVovBU5IftAA=
Where did you find MK802+ firmware?
Where did you find MK802+ firmware?
Thanks !
azua_23 said:
Hello
So I tried to load firmware I found for other A10S devices (MK802+). It works, but only HDMI output.
.
Click to expand...
Click to collapse
shared link says file not found. Would appreciate if you could share files
I have this Huawei medipad 7 youth model number S7-701wa, I am trying to find stock rom for this model number. I tried to do the hard reset for this model but for some reason its not working. I would like to bring it back on stock
On Huawei website i found some of the models S7-701u and S7-701w but not for S7-701wa , i already tried stock rom for those models but did not work.
Could anybody please help me in this.
Brownpanda said:
I have this Huawei medipad 7 youth model number S7-701wa, I am trying to find stock rom for this model number. I tried to do the hard reset for this model but for some reason its not working. I would like to bring it back on stock
On Huawei website i found some of the models S7-701u and S7-701w but not for S7-701wa , i already tried stock rom for those models but did not work.
Could anybody please help me in this.
Click to expand...
Click to collapse
the s7-701wa is a Japanesse version, you must search for this firmware in google:
S7-701wa_FIRMWARE_Android4.1_C343B003_Japan_JCOM_05011XXK.zip
puntoazul said:
the s7-701wa is a Japanesse version, you must search for this firmware in google:
S7-701wa_FIRMWARE_Android4.1_C343B003_Japan_JCOM_05011XXK.zip
Click to expand...
Click to collapse
Thanks a lot for your time , i will check and get back to you
I have tried to find this firmware on google , but could not find it anywhere,
Could anybody please help me in this, I need to bring it to stock but cannot find firmware anywhere ..
Same here
Trying to find the same firmware. Huawei has been no help at all. Cannot locate the Japanese version S7-701wa_FIRMWARE_Android4.1_C343B003_Japan_JCOM_0501 1XXK.zip as well. If anyone can direct me to the correct site, it would be greatly appreciated.
Gurn Blanston said:
Trying to find the same firmware. Huawei has been no help at all. Cannot locate the Japanese version S7-701wa_FIRMWARE_Android4.1_C343B003_Japan_JCOM_0501 1XXK.zip as well. If anyone can direct me to the correct site, it would be greatly appreciated.
Click to expand...
Click to collapse
here --> http://www.easy-firmware.com/index.php?a=browse&b=file&id=4146.
and try here ---> http://www.easy-firmware.com/index.php?a=search&b=s7-70
Cannot Access Site
Hi, and thank you for your reply.
Sorry for being a NOOB, but when I click on those links, or copy / paste them, I get the following error message:
Fatal error: The file /home/easyfirmware/public_html/index.php cannot be decoded by this version of the ionCube Loader. If you are the administrator of this site then please install the latest version of the ionCube Loader. in Unknown on line 0
I tried downloading the ionCube .exe file, but have no idea how to set that up.
Hello again.
I managed to access the easyfirmware site, but unfortunately it only carries the firmware for the S7-701w which is not compatible with my S7-701wa device.
Thanks again for your help.
S7-701wa firmware link
here's the link www(dot)androidfilehost(dot)com/?fid=24369303960683276
THANKS
4500intelxed said:
here's the link www(dot)androidfilehost(dot)com/?fid=24369303960683276
Click to expand...
Click to collapse
this one work?
most of firmware in tried failed
Well, I'm not OP, but I'm downloading it right now. Turns out this SKU of the mediapad was used for VISA sign up kiosks at Tim Hortons in Canada (My boss gave it to me since the program was discontinued), however being a sign up kiosk, mine has a locked down firmware which can only access a specific website, which has since been taken down. Also, because of it's locked down state, I can't enable adb debugging to root the device and install TWRP, etc.
I've been able to get into recovery and attempted to flash the 701s and 701w firmware variants like OP, needless to say those didn't work.
EDIT: It seems to be flashing! Thanks so much!
Same issue as you!!
szteto said:
Well, I'm not OP, but I'm downloading it right now. Turns out this SKU of the mediapad was used for VISA sign up kiosks at Tim Hortons in Canada (My boss gave it to me since the program was discontinued), however being a sign up kiosk, mine has a locked down firmware which can only access a specific website, which has since been taken down. Also, because of it's locked down state, I can't enable adb debugging to root the device and install TWRP, etc.
I've been able to get into recovery and attempted to flash the 701s and 701w firmware variants like OP, needless to say those didn't work.
EDIT: It seems to be flashing! Thanks so much!
Click to expand...
Click to collapse
Hello Sir,
I am encountering the same issues. Mine is also a Tim Hortons tablet I'd like to get going but haven't managed as of yet. How did you get yours going? What tools do I need? Any help is appreciated.
szteto said:
Well, I'm not OP, but I'm downloading it right now. Turns out this SKU of the mediapad was used for VISA sign up kiosks at Tim Hortons in Canada (My boss gave it to me since the program was discontinued), however being a sign up kiosk, mine has a locked down firmware which can only access a specific website, which has since been taken down. Also, because of it's locked down state, I can't enable adb debugging to root the device and install TWRP, etc.
I've been able to get into recovery and attempted to flash the 701s and 701w firmware variants like OP, needless to say those didn't work.
EDIT: It seems to be flashing! Thanks so much!
Click to expand...
Click to collapse
Hey mate,
Sorry for the late reply, but I was just given one of these tablets also by my boss at Tims...any chance you could give me a hint on how to get the thing up and running? I'm new to all this rooting/firmware updating stuff
Please provide root guide for this P23 Chipset...
the main problem in rooting this device is that OPPO has blocked fast-boot mode in this device
and i am unable to unlock its boot-loader without that..
and help me for porting twrp for this device...
any suggestions about rooting are most welcomed
thanks in advance :laugh:
Device Conifguration
Model- Oppo F5 (CPH1723)
ColorOs version- V3.2
Android version- 7.1.1
RAM- 4GB
Version- CPH1723EX_11_A.18_180117
Baseband Version - M_V3_P10
Kernel Version - 4.4.22-G201801171019
no one knows..
even i tried all the way i can....even downloaded ported twrp from p23 chipset and tried flashing it via miracle box and it was successful but while booting it automatically flashes old color os recovery
and also i tried rooting the stock boot.img and flashing it via miracle but again it says ...
try flashing official boot or recovery image,damn
i heard that they removed the fastboot binary on their phones,still theirs an option to bring it back,but i dont know
Up update guys?
rahul.trivedi1994 said:
even i tried all the way i can....even downloaded ported twrp from p23 chipset and tried flashing it via miracle box and it was successful but while booting it automatically flashes old color os recovery
and also i tried rooting the stock boot.img and flashing it via miracle but again it says ...
try flashing official boot or recovery image,damn
i heard that they removed the fastboot binary on their phones,still theirs an option to bring it back,but i dont know
Click to expand...
Click to collapse
Can you backup the scatter file with miracle box?
Is there any root method for oppo f5 6gb??
Yes i can
Gibz97 said:
Can you backup the scatter file with miracle box?
Click to expand...
Click to collapse
Yes i have scatter file and boot.img n recovery.img etc
rahul.trivedi1994 said:
Yes i have scatter file and boot.img n recovery.img etc
Click to expand...
Click to collapse
Can I see the scatter file? Please
Gibz97 said:
Can I see the scatter file? Please
Click to expand...
Click to collapse
Sure why not.. I'll upload in night and . I've tried alot of ways to unlock bootloader but failed(rooted boot.img n flash it)(twrp port ) etc...
you can whatsapp me and we will work on this if possible..
rahul.trivedi1994 said:
Sure why not.. I'll upload in night and . I've tried alot of ways to unlock bootloader but failed(rooted boot.img n flash it)(twrp port ) etc...
70005zzzzz you can whatsapp me and we will work on this if possible..
Click to expand...
Click to collapse
Cool
guys update for rooting F5? whats up?
i hope somebody can find a way to root this phone..
any updates?
update: rooting oppo f5
any update, please.
Need a scatter file
Can anyone share the scatter file with me, please?
Any development on how to root this oppo F5?
Or did someone managed to find custom recovery for this mobile?
Please share
Try temp root for mediatek
It works on my gf a5s
https://github.com/JunioJsv/mediatek-easy-root
Need help regarding which tool should be used to flash stock firmware on Oppo F5.
I am trying to flash stock rom on my oppo f5 but my phone is not detected by the SP flash tool, it does nothing when I press download button on the SP flash tool and connect the switched off phone, nothing happens and after a while phone starts charging as normally it does when connected to a computer.
While i can easily flash other MTk phones easily on the same computer, which means there is nothing wrong with my computer and mediatek drivers are installed properly.
Please let me know if someone has ever attempt to flash stock firmware or any other firmware on this device.
Thanks
Sorry for my out of topic discussion because i cant make thread before certain post
I have oppo f5 with build number 1723.
And my phone has infected by an adware. As i remember at that time my build is around 2017’s build because i never really upgrade my firmware
And i upgrade my firmware via recovery mode or whatever the name of it. Because when i try to press check for upgrade via setting it does nothing.
I downloaded my updated firmware from oppo official website and i double checked them and i am pretty sure the downloaded firmware is for build 1723
After i upgrade my firmware my phone name changed to OPPO A73 which is oppo f5 youth (correct me if i am wrong)
now my phone cant read sim card anymore and when i check imei on *#06# it only says “null”
Anyone here know what the solution?
Note : I am sure my downloaded firmware is for 1723 build because i double checked them before install and i am sure my phone build number is 1723
Thanks in advance
Sory for mu bad english
drajudge13 said:
Sorry for my out of topic discussion because i cant make thread before certain post
I have oppo f5 with build number 1723.
And my phone has infected by an adware. As i remember at that time my build is around 2017’s build because i never really upgrade my firmware
And i upgrade my firmware via recovery mode or whatever the name of it. Because when i try to press check for upgrade via setting it does nothing.
I downloaded my updated firmware from oppo official website and i double checked them and i am pretty sure the downloaded firmware is for build 1723
After i upgrade my firmware my phone name changed to OPPO A73 which is oppo f5 youth (correct me if i am wrong)
now my phone cant read sim card anymore and when i check imei on *#06# it only says “null”
Anyone here know what the solution?
Note : I am sure my downloaded firmware is for 1723 build because i double checked them before install and i am sure my phone build number is 1723
Thanks in advance
Sory for mu bad english
Click to expand...
Click to collapse
I'm having same issue , do u find any solution
Hi i need help unbricking this. I flashed a img file to boot partition and my phone didnt seem to like it. How do i fix it. do i need boot.img file? does anyone who uses that phone have it? pls help if you know about mtk devices pls help me
I think i just need the stock rom
Ty in advance
kusti420 said:
Hi i need help unbricking this. I flashed a img file to boot partition and my phone didnt seem to like it. How do i fix it. do i need boot.img file? does anyone who uses that phone have it? pls help if you know about mtk devices pls help me
I think i just need the stock rom
Ty in advance
Click to expand...
Click to collapse
You can download Cubot X19 ROM from their website (cubot net/support/firmware/x19/)
Any idea how to root this device?
Official firmware URL in Cubot website
mega.nz/#!JVEx3YqR!lthU61ZF1_deyBrtrQyNeOJ4uUqw9C_V2SZfH3lfS9U
However, this firmware having problem.
After flash, Display has been showing "No write Google Key".
i.imgur.com/7NJuU5Q.png
I don't know about this message and having no idea erase.
---------- Post added at 03:12 AM ---------- Previous post was at 03:07 AM ----------
spirtosan said:
Any idea how to root this device?
Click to expand...
Click to collapse
Use Magisk.
But, problem in official firmware is not solved.
Use Magisk
Click to expand...
Click to collapse
Thank you , but can you make a little guide?
spirtosan said:
Thank you , but can you make a little guide?
Click to expand...
Click to collapse
Check this Guide.
https://forum.xda-developers.com/android/software-hacking/root-recovery-root-device-magisk-t3779454
This is Log in Windows Powershell.
PS C:\WINDOWS\system32> adb devices
List of devices attached
* daemon not running; starting now at tcp:5037
* daemon started successfully
0123456789ABCDEF unauthorized
PS C:\WINDOWS\system32> adb shell reboot bootloader
PS C:\WINDOWS\system32> fastboot devices
0123456789ABCDEF fastboot
PS C:\WINDOWS\system32> fastboot getvar unlocked
unlocked: no
Finished. Total time: 0.003s
PS C:\WINDOWS\system32> fastboot oem unlock <<-- You need Press Volume UP on X19-->>
(bootloader) Start unlock flow
OKAY [ 29.367s]
Finished. Total time: 29.368s
PS C:\WINDOWS\system32> fastboot getvar unlocked
unlocked: yes
Finished. Total time: 0.003s
PS C:\WINDOWS\system32> fastboot reboot <<--Reboot Android and Setup-->>
PS C:\WINDOWS\system32> adb shell reboot bootloader
PS C:\WINDOWS\system32> fastboot devices
0123456789ABCDEF fastboot
PS C:\platform-tools> fastboot flash boot "D:\patched_boot.img" <<--Select patched_boot.img on your PC-->>
Sending 'boot' (9404 KB) OKAY [ 0.520s]
Writing 'boot' OKAY [ 0.651s]
Finished. Total time: 1.176s
PS C:\platform-tools> fastboot reboot
Rebooting
Finished. Total time: 0.002s
http://forum.cubot.net/viewtopic.php?f=21&t=2375
spirtosan said:
You can download Cubot X19 ROM from their website (cubot net/support/firmware/x19/)
Any idea how to root this device?
Click to expand...
Click to collapse
yeah, they finally uploaded the rom there
rooting is easy, just download magisk, patch the boot.img and then flash it with adb
Thank you, this method worked.
Code:
C:\Users\mc>cd c:\adb
c:\adb>adb devices
List of devices attached
* daemon not running; starting now at tcp:5037
* daemon started successfully
0123456789ABCDEF unauthorized
c:\adb>adb devices
List of devices attached
0123456789ABCDEF device
c:\adb>adb reboot bootloader
c:\adb>fastboot flash boot c:\adb\boot.img
Sending 'boot' (9993 KB) OKAY [ 0.675s]
Writing 'boot' FAILED (remote: 'not allowed in locked state')
fastboot: error: Command failed
c:\adb>fastboot oem unlock
(bootloader) Start unlock flow
OKAY [ 25.885s]
Finished. Total time: 25.890s
c:\adb>fastboot flash boot c:\adb\boot.img
Sending 'boot' (9993 KB) OKAY [ 0.522s]
Writing 'boot' OKAY [ 0.133s]
Finished. Total time: 0.705s
c:\adb>fastboot reboot
Rebooting OKAY [ 0.000s]
Finished. Total time: 0.003s
enotaes said:
Official firmware URL in Cubot website
mega.nz/#!JVEx3YqR!lthU61ZF1_deyBrtrQyNeOJ4uUqw9C_V2SZfH3lfS9U
However, this firmware having problem.
After flash, Display has been showing "No write Google Key".
i.imgur.com/7NJuU5Q.png
I don't know about this message and having no idea erase.
---------- Post added at 03:12 AM ---------- Previous post was at 03:07 AM ----------
Use Magisk.
But, problem in official firmware is not solved.
Click to expand...
Click to collapse
i had the same problem. in my case imei numbers were missing and after i contacted cubot, they helped me out and i got rid of that watermark
I'm bored too.
ADB is working, but fastboot doesn't get the right for the confirmed PC.
Concerning missing IMEIs I searched long time and finally solved it with https://androidmtk.com/download-sn-write-tool
Any one know where I can down load CUBOT_X19_9021C_2_V02_20190802 android 9.0 (current firware)? On Cubot website it shows old firmware CUBOT_X19_9021C_1_V08_20190627 android 9.0.
Thanks
Any one know where I can down load CUBOT_X19_9021C_2_V02_20190802 android 9.0 (current firware)? On Cubot website it shows old firmware CUBOT_X19_9021C_1_V08_20190627 android 9.0.
Thanks
Click to expand...
Click to collapse
Hi
The official website for the Cubot X19 Firmware is https://www.cubot.net/support/firmware/x19/.
I have heard / read, that they have tried a new firmware but this didn't work at the customers so they have retired it.
This may be the firmware you have written.
After my experience the developers have theyr professional environment where some things work fine, but on other PCs or in other networks with other pathes it doesn't work.
This is a general problem of developers, not only Cubot.
Even for me as experienced user (and not developer): They send me a fix for the Google-Key-Watermark which didn't work with theyr pathes. I adapted it for my environment, and it worked. But now I am adapting these changes general, for that it works for all users. Each detail is important, sometimes its good to make a break and to re-check it the next day (or some days later when other things are more important).
I hope they can integrate the next fix of the buggy recovery (no zip-file install possible) in the next update; or when the fix they are proposing to me will work, I will publish him here.
Best regards
Christopher
G3O_CH said:
Hi
The official website for the Cubot X19 Firmware is https://www.cubot.net/support/firmware/x19/.
I have heard / read, that they have tried a new firmware but this didn't work at the customers so they have retired it.
This may be the firmware you have written.
After my experience the developers have theyr professional environment where some things work fine, but on other PCs or in other networks with other pathes it doesn't work.
This is a general problem of developers, not only Cubot.
Even for me as experienced user (and not developer): They send me a fix for the Google-Key-Watermark which didn't work with theyr pathes. I adapted it for my environment, and it worked. But now I am adapting these changes general, for that it works for all users. Each detail is important, sometimes its good to make a break and to re-check it the next day (or some days later when other things are more important).
I hope they can integrate the next fix of the buggy recovery (no zip-file install possible) in the next update; or when the fix they are proposing to me will work, I will publish him here.
Best regards
Christopher
Click to expand...
Click to collapse
Thanks for replying. Actually the firmware I am looking for which is US version. I got the answer from Cubot after-sale support to me that: " Hello,
I asked our engineer for help. But he told me that we didn't have the US version firmware for this phone, the firmware all are the same, not special US version. "
Attached is my Phone US version Build number.
KimLe said:
Thanks for replying. Actually the firmware I am looking for which is US version. I got the answer from Cubot after-sale support to me that: " Hello,
I asked our engineer for help. But he told me that we didn't have the US version firmware for this phone, the firmware all are the same, not special US version. "
Attached is my Phone US version Build number.
Click to expand...
Click to collapse
Hi
The answer looks like written by Scarlett. She tries to make the support while the developers are doing other things, probably preparing the coming Cubot X20.
Scarlett writes quite good English, answers from develeopers (engineers) looks like have been written in Chinese and translated by Google. My English isn't well too (living in Switzerland I prefer German or French).
The actual Android 9 ROMs for the Cubot Phones are based on GSI-Treble-ROMS (https://forum.xda-developers.com/project-treble). These are international and adapted with drivers and settings for specific hardware (Cubot X19).
I don't think that your firmware is a specific US version. But it looks like they have installed on some devices a new firmware, which made problems and was retired.
If hou have big problems with your firmware, it could help to downgrade on the version from the website. If the problems are small, you better don't change too much.
Best regards from Switzerland
Christopher
G3O_CH said:
Hi
The answer looks like written by Scarlett. She tries to make the support while the developers are doing other things, probably preparing the coming Cubot X20.
Scarlett writes quite good English, answers from develeopers (engineers) looks like have been written in Chinese and translated by Google. My English isn't well too (living in Switzerland I prefer German or French).
The actual Android 9 ROMs for the Cubot Phones are based on GSI-Treble-ROMS (https://forum.xda-developers.com/project-treble). These are international and adapted with drivers and settings for specific hardware (Cubot X19).
I don't think that your firmware is a specific US version. But it looks like they have installed on some devices a new firmware, which made problems and was retired.
If hou have big problems with your firmware, it could help to downgrade on the version from the website. If the problems are small, you better don't change too much.
Best regards from Switzerland
Christopher
Click to expand...
Click to collapse
Yes, you are right. The answer was written by Scarlett.
I got Cubot X19 US version from GearBest : https://www.gearbest.com/cell-phones/pp_009514021249.html?wid=1349303#goodsDetail
The firmware support US Network.
Networks:
GSM: 850/900/1800/1900MHz
WCDMA: 850/1700/1900MHz
FDD-LTE: B2/4/5/7/12/17/28A+B
And it is different with EU Network.
Networks:
GSM 850/900/1800/1900MHz
WCDMA 900/2100MHZ
FDD-LTE B1/3/7/8/20
KimLe said:
Yes, you are right. The answer was written by Scarlett.
I got Cubot X19 US version from GearBest : https://www.gearbest.com/cell-phones/pp_009514021249.html?wid=1349303#goodsDetail
The firmware support US Network.
Networks:
GSM: 850/900/1800/1900MHz
WCDMA: 850/1700/1900MHz
FDD-LTE: B2/4/5/7/12/17/28A+B
And it is different with EU Network.
Networks:
GSM 850/900/1800/1900MHz
WCDMA 900/2100MHZ
FDD-LTE B1/3/7/8/20
Click to expand...
Click to collapse
Okay, compared with the official specifications on https://www.cubot.net/smartphones/x19/spec.html there are some significant differences.
When Scarlett couldn't solve the problem, she gave me a mail adress from a developer (engineer).
I don't want to publish this adress because this isn't the official way. But I will send you the mail adress with private message.
Best regards
Christopher
G3O_CH said:
Okay, compared with the official specifications on https://www.cubot.net/smartphones/x19/spec.html there are some significant differences.
When Scarlett couldn't solve the problem, she gave me a mail adress from a developer (engineer).
I don't want to publish this adress because this isn't the official way. But I will send you the mail adress with private message.
Best regards
Christopher
Click to expand...
Click to collapse
Thanks. :good:
Hi
I have the same problem with Red Google Key watermark but this watermark consist Chinese characters. ->
https://drive.google.com/open?id=1mRI7uTe4qc7UB019fJhlBlRNBjD-fNZ1
I wrote IMEI again by https://androidmtk.com/download-sn-write-tool and I can connect via phone and LTE, but I still have red watermark
Have you idea how to fix it?
Regards
Hi,
what for boot.img must I use for magisk?
boot-verified.img or boot.img?
micgeb said:
Hi,
what for boot.img must I use for magisk?
boot-verified.img or boot.img?
Click to expand...
Click to collapse
Hi
I used boot.img
For Android 9 commands in adb:
adb reboot bootloader
fastboot flashing unlock
fastboot flash boot magisk_patched.img
fastboot reboot
Regards