Hi, I create this thread so we can share all the different nandroid backups we have.
If you want to share your nandroid just write in this thread and I will add your nandroid link and description in the OP.
Mandatory information you should provide:
* Device: We already know what we are talking about here but if you confirm your device it will give us extra confidence.
* Model: We know that we are talking about the LGV521 for T-Mobile but again make people trust you.
* Code Name: Well, if you didn't know, our device is b3....
* Carrier: Of course, Tmo, just make it clear.
* Software version: Special attention here, there are different version of this, make sure you know what specific version you are sharing with others, please don't soft/hard brick or boot loop other's phones.
* Description: Tell us if your nandroid is rooted/unrooted, with/without stock apps, etc... Just make it clear please, so people know what they are going to flash.
* Link: Self explanatory.
Note: I will add your username as UPLOADER.
Let me begin with mine:
Device: Lg G Pad X 8.0
Model: LGV521
Code Name: b3
Carrier: T-Mobile
Software version: V52110c
Description: This nandroid backup is based on .dz provided for tungkick which is stock with root integration, it was created with twrp.
Link:https://www.androidfilehost.com/?fid=529152257862683559
Reserved 1....
Reserved 2....
I'm getting No Mirrors Found when I go to download this. Any chance of a reupload? Thanks!
APLandry said:
I'm getting No Mirrors Found when I go to download this. Any chance of a reupload? Thanks!
Click to expand...
Click to collapse
I just checked the links for this and for the Stock Rooted Rom and they are working well.
May be is your connection, setup or location...
Try with a different browser.
Related
Hi, I just bought a brand-less China-made Android phone with the words "4G LTE" on its back. It is dual SIM and a portable TV.
I would like to know if there is a better ROM while retaining the 2 features abovementioned?
Looking at the About Phone and Sysinfo, it says that it is a:
Processor: ARMv6-compatible processor rev 7 (v6l)
BogoMIPS: 668.46
Features: swp half thumb fastmult vfp edsp java
Release Codename: REL
API Level: 10
CPU ABI: armeabi
Brand: yusu
Hardware: mt6573
Android Version: 2.3.4
Kernel Version: 2.6.35.7
Device Model Number: e1101_v73_klx1ctp_capella
Baseband Version: MAUI.11AMD.W11.19.SP.V2,2011/10/01 03:35
Display Build Number: ALPS.GB.FDD2.MP.V2.14
Custom Build Version: 1324885510
Host: zhangjianan-Android
ID: GRJ22
Tags: test-keys
Type: user
User: root
What would you advise? Thanks!
check the techknow forum you will have all the china roms
MIUI se convierte en Open Source
Looking for the same thing, anyway somone could provide a link to techknow china roms? I tried google it brought up several entries. Can't get a bead on it.
h4300, is currently having problems with the screen getting out of sync (i think) starts to scramble and stuff like that.
The power button never worked out of the box, I had edited the key files to get functionality out of it, but I still cant turn it on. When its in the powered off state.
I am thinking this is just a rom issue. Since I am fairly new to the android scene, I cants say for sure.
Certainly, compiling my own rom is an option. Before I even attempt that I have to figure out how to get a recovery option going. I'm not even sure if its possible to get clockworkmod on this phone.
It's just so hard to find info on these mt65xx phones. If anyone has experience with mt65xx china phones, concerning backup, recovery, flashing. Please send me a PM.
What I need to figure out is how to backup the ROM on it, and flash new one. I guess I can live with finding / or compiling my own. However I would like to avoid building my own.
Thank you for you responses.
---------- Post added at 11:42 AM ---------- Previous post was at 11:31 AM ----------
I want to note, that I would like to just (re)flash the original rom, as opposed flashing a custom one.
I am thinking something got corrupt during their flash process. Talking to china customer support about it isn't yielding any results. They just keep asking me to send it back, and shipping it back costs more then the cost of the actual phone.
If I could just find the correct tools to flash, and back up. It would be a step in the right direction.
Again thank for your responses, helpful or not.
Search google for a chinese htc hd2 clone someone did a port of cyanogen and recovery for it mate. Once i arrive home i will also try to search for the phone again
Sent from my Nexus One using xda premium
Thats great news, I will do a search for those, but I also found the stock ROM
Mirror Link
http://depositfiles.com/files/vxoe714di
Original Link
http://115.com/file/aqot7e50
Now I need to find the stuff to flash the stock...
Wooohaaaa
Flashing tools can be found here:
http://bm-smartphone-reviews.blogspot.com/2011/10/mt65x3-flashing-tutorial.html
itsme12345 said:
check the techknow forum you will have all the china roms
Click to expand...
Click to collapse
Hi, may I know:
Where is the "techknow" forum?
Can we have start a "China ROMs" section here on xda?
Thanks!
p/s. I just saw that this H4300 phone has a new 3D ROM!! (really wondering where I can get the ROM now~~)
http://www.dhgate.com/2gb-thunderbo...oid-2/p-ff80808133cfdacc0134131448f7623e.html
well decided to send it back (found a cheaper way) Got the new phone and working great except that the app HP Eprint$biz is not printing my pictures over cell data connection, all automatically print failure....
I dont get how it works on one and not on the other its the same phone. Am I missing something simple???
***EDIT** Ehh whatever went to an older version all is well. I can live with that.
I think I just found a cwm recovery....gotta test
Also another ROM ... will test both by end of week.
***edit sadly I was unable to get the other ROM I found working.....still testing with it***
:: Hero 4300 CWM Recovery Image File ::
**Menu is in Chinese(But hey you can make and restore backups, and etc)**
Original Link: http://115.com/file/c2d2ttuo
Mirror Link: http://www.4shared.com/zip/-w_HCAUs/CWM_H4300_recovery.html
Have you create a new scatter file for your phone?
The phone is a Hero H4300 using Mediatek chip MT6573. If you look for "H4300 Thunderbolt" on Youtube, you can see that the manufacturer has a new 3D ROM for it. It will be great if we can flash our devices with this new ROM. Thanks for your great job and I am looking forward to a custom ROM for this little wonder, because the stock Bluetooth does NOT work well, and Skype for Android has a problem with it too, apparently.
13lack13ox said:
:: Hero 4300 CWM Recovery Image File ::
**Menu is in Chinese(But hey you can make and restore backups, and etc)**
Original Link: http://115.com/file/c2d2ttuo
Mirror Link: http://www.4shared.com/zip/-w_HCAUs/CWM_H4300_recovery.html
Click to expand...
Click to collapse
Predator911 said:
Have you create a new scatter file for your phone?
Click to expand...
Click to collapse
No I never did create a scatter file for the h4300 with the MT657x3 Flash Tool. I do know it can be done. The process was a little over my head at the time. Being pretty new to the android platform I just wanted a simple solution to do backups and recovery (quick and easy) which is why I was trying so hard to find a CWM recovery for it.
I did manage to get the recovery working using the scatter file that came with the original rom, I just clicked on the recovery file, and browsed to the (CWM Like)recovery and flashed. I got and error when done flashing it (but it works, tested nandroid backup and restore, but thats all I tested) Im not sure if this was the correct procedure....I doubt it was. But backups and recovery worked for me. I dont want to mess around with it too much if that functionality is working.
---------- Post added at 07:52 PM ---------- Previous post was at 07:29 PM ----------
To create a scatter file for your stock rom please read here.
http://bm-smartphone-reviews.blogspot.com/2012/04/creating-rom-dump-of-your-mt65x3-device.html
rykel98 said:
Thanks for your great job and I am looking forward to a custom ROM for this little wonder
Click to expand...
Click to collapse
I am not responsible for any part of the creation of this. I merely translated the sites and found a recovery that worked.
Well I hope that someday we can have custom roms for this phone....
What cheaper way did you find ?
13lack13ox said:
well decided to send it back (found a cheaper way) Got the new phone and working great except that the app HP Eprint$biz is not printing my pictures over cell data connection, all automatically print failure....
I dont get how it works on one and not on the other its the same phone. Am I missing something simple???
***EDIT** Ehh whatever went to an older version all is well. I can live with that.
Click to expand...
Click to collapse
What cheaper way did you find ?
oh my sorry....havent been watching this thread. Used a flat rate box from US postal service. The place said to not go that route, but i took a chance.
Sorry for digging up this grave, but I felt compelled to answer
Sent from my Inspire 4G using xda app-developers app
Which is a reliable place to buy China phones . I recently found a tablet for $399 with same processor as S3. Only doubtful if its legitimate.
Site is antelife.com ... Any comments?
Sent from my HTC Sensation XE with Beats Audio Z715e
I dunno if there is such a thing in mail order. The question should be... Which courier is most reliable. Ive had hella bad luck, even from new egg.
Ehhh, place looks ok to me. But its up to you, its always a gamble in the mail.
Sent from my Inspire 4G using xda app-developers app
Hello Guys,
Could anyone please provide some info about this case:
o What are my options if I have an Android device (smartphone) not supported by CyanogenMod?
o Is there anything than waiting until my model will be added to the supported list? I bought a very simple and reasonably priced "no-name" phone (Simvalley SP-2X.SLIM), and I learn now one disadvantage is that it is not supported.
o I also did not find anything about rooting, flashing or even booting it up into safe mode / recovery.
Any help and info is very much appreciated.
TWRP
schmayer said:
Hello Guys,
Could anyone please provide some info about this case:
o What are my options if I have an Android device (smartphone) not supported by CyanogenMod?
o Is there anything than waiting until my model will be added to the supported list? I bought a very simple and reasonably priced "no-name" phone (Simvalley SP-2X.SLIM), and I learn now one disadvantage is that it is not supported.
o I also did not find anything about rooting, flashing or even booting it up into safe mode / recovery.
Any help and info is very much appreciated.
Click to expand...
Click to collapse
Hy there, you can try TWRP Manager. It's a similar program
schmayer said:
Hello Guys,
Could anyone please provide some info about this case:
o What are my options if I have an Android device (smartphone) not supported by CyanogenMod?
o Is there anything than waiting until my model will be added to the supported list? I bought a very simple and reasonably priced "no-name" phone (Simvalley SP-2X.SLIM), and I learn now one disadvantage is that it is not supported.
o I also did not find anything about rooting, flashing or even booting it up into safe mode / recovery.
Any help and info is very much appreciated.
Click to expand...
Click to collapse
Well, here it is straight forward, your device only gets official support if the Cyanogenmod teams deems the unofficial build for it stable and reliable to gain official support. If there isn't any unofficial builds then it's safe to say that it will never have official support. As for rooting the device there may be methods for it available, a universal root for example, flashing as in roms and other things, no clue, never heard of that device before and there might not be any support for it either. So with that being said, hope this helps you.
Sent from an Xposed LG-G2/LS-980
yoelpro said:
Hy there, you can try TWRP Manager. It's a similar program
Click to expand...
Click to collapse
Hi Yoelpro,
Thanks for your info. Since my first post I have managed to root my device - was very happy. It was not too easy, given that it is extremely minimal supported. I already tried TWRP with GooManager, but when I try to install an open recovery sript, surprise surprise: "no recoveries were found for your device".
Any ideas if there is another way to find one and copy it on the phone? I have to confess being too scared even trying to flash a custom ROM without flashing a backup first. I managed to find out that the stock ROM is a Vanilla on my Simvalley SP-2X.SLIM.
Thank you.
Critical Detox said:
Well, here it is straight forward, your device only gets official support if the Cyanogenmod teams deems the unofficial build for it stable and reliable to gain official support. If there isn't any unofficial builds then it's safe to say that it will never have official support. As for rooting the device there may be methods for it available, a universal root for example, flashing as in roms and other things, no clue, never heard of that device before and there might not be any support for it either. So with that being said, hope this helps you.
Sent from an Xposed LG-G2/LS-980
Click to expand...
Click to collapse
Hey there Critical Detox
Thanks for your info. Since my first post I have managed to root my device: Simvalley SP-2X.SLIM - was very happy to see that it is working.
Unfortunately, I could not even find an unofficial CM build, I'm quite sure that an official build does not exist. Interestingly, my device was once perfectly recognized as SP-2X.SLIM and once recognised as HTC (for drivers) during the rooting. I'm very curious IF or AS WHAT my device would be recognized if I started the one click install of CM. I might be a chicken, but a careful chicken as I don't want to do it before saving a backup of the stock ROM to my SD card first. When I try to install an open recovery sript (GooManager), surprise surprise: "no recoveries were found for your device". I managed to find out that the stock ROM on my device is a Vanilla 4.2.2 but could I not find this ROM to download yet.
Any help is very welcome, as I am not quite an expert and my phone is a quasi no-name model.
Cheers,
schmayer
TWRP 2.8.5.0 for the SGH-M819N MetroPCS Mega 6.3
With permission from the highly skilled developer who generously took his time to create this build, I share with you Team Win Recovery Project version 2.8.5.0 for the MetroPCS Mega 6.3 (SGH-M819N). I can't take any credit for this build, but all I can say is don't forget to appreciate your developers who kindly take their time to bring things like this to you.
The need for this build arose after discovering the partition table on the MetroPCS Mega 6.3 is slightly different than on the international Mega 6.3, and it created an incompatibility with the more recent TWRP builds. If the AT&T variant ever gets it's bootloader cracked/unlocked (don't hold your breath), then this should also work on it too, as it's partition table is identical to the MetroPCS's. I have no idea about the Sprint variant.
Anyway, down to business...
Downloads
I've attached the recoveries to this post in zip and tar format. If for some reason this isn't allowed, I've created alternate download mirrors. If you need this recovery in .img format, simply download the zip and extract it from that. Chances are, if you're here, you're already capable of handling that. Anyhow, enjoy...
Mirror #1:
https://www.mediafire.com/folder/1f1qo3fqhj5bm/TWRP
Mirror #2:
https://drive.google.com/folderview...h5czBwRTlfeW1VaUlLZFdTbm5VYXRrdms&usp=sharing
Any knowledge if the Canadian mega had the same partition table? No locked boot loader for Canada. And I have been using the ROMs built for the 9205 I think..
I checked the partition table of my Canadian mega and it seems the same to me. (After a few drinks it looked almost exact, so you might want some one else to confirm). So I flashed it and everything seems to be working fine.. But I will not know for sure until my yearly wipe and reinstall..
Of anyone wants to see my partition table send a message and Ill post it
As an update I've been using this recovery on my Canadian mega i527m for a week now, been flashing and backup and restoring most every day as I Mess with my mega
Only issue I have found is that when rebooting and it asks to install super user I can't cancel out and if I hit yes the screen just goes black and it reboots..
Other wise it's working pretty good.
thank you for posting this.
Nice work
I know this post is a few years old, but thank you so much for this TWRP build!! I have a client that was about to give up on his MetroPCS Mega 6.3, so I suggested TWRP, SuperSU, System App Remover Pro, Titanium Backup, AdAway, BusyBox, & EX Kernel Manager (a GREAT kernel tweaking tool, even for Kernels other than ElementalX!!), and now she's running like a champ!!
Ugh, Samsung crapware just KILLS devices that would otherwise be great, so thank you again for this TWRP build. It made flashing SuperSU a breeze, not to mention the ability to make Nandroid's . . . . then, it was time for bloatware removal and some tweak-tastic goodness!!
I would've preferred to flash a custom ROM, but apparently there isn't a single one that's 100% functional on the MetroPCS variant (SGH-M819N), so again, thank you so much for this. If a decent, compatible custom ROM ever surfaces, at least now we have a way to flash it!!
Flashable rom for m819n
There is resurrection remix 7.1 romcant post links but have them on onedrive if you need one
custom rom
teders22 said:
There is resurrection remix 7.1 romcant post links but have them on onedrive if you need one
Click to expand...
Click to collapse
could you send a link to me for the rom. i have the MetroPCS Mega 6.3 and would like to revive it
Yes I can later today after I get of work I'll try during lunch but after work for sure
teders22 said:
Yes I can later today after I get of work I'll try during lunch but after work for sure
Click to expand...
Click to collapse
Here is the official web page I would download it from there.twrp 2850 I don't think it flashes this release on my device it I st boot loops I use twrp 3...
https://drive.google.com/file/d/1H62zmCGj93qTaWkprgO8EN0d70njtIoa/view
I'm sorry I've been working day and right now that I forgot to post earlier.
IPL try to get twrp gapps and ROM up for you before I back to work today
[
QUOTE=teders22;76765726]Yes I can later today after I get of work I'll try during lunch but after work for sure[/QUOTE]
Here is the link to twrp 3.2 for mega and resurrection ROMs 7.1. And 8.1. You need this twrp and if you ever loose root Here is magisk 16 to reroot hope these help
https://1drv.ms/f/s!ApOUNLEkX72djUGd8BbHHg4t3Wc8
THIS WILL ONLY WORK ON KINZIE AKA MOTO X FORCE!
Warning: Flashing this may void your device’s warranty, lead
to data loss, hair loss, financial loss, privacy loss, security breaches, or other damage, and therefore
must be done entirely at your own risk. No one affiliated with this project is responsible for your
actions but yourself.
Click to expand...
Click to collapse
Not working:
Hotspot is working but buggy (spam turn on a bit and it should work)
Camera recording
maybe some minor bugs
To get store working set password in developer tools and then run in terminal "devel-su zypper ref" then type password and ignore first repo error.
INSTALL:
- download cm13 base
- download rootfs
- [OPTIONAL] flash Jolla bootlogo
- wipe everything (data/dalvik/system/cache you know)
- Install cm13
- Install rootfs
- Boot
- Reboot after first boot to have audio control fixed
- Have fun
Changelog:
BUILD 3:
Initial public release
STABLE 1:
Fixed usb networking
Fixed led
Fixed audio volume control
STABLE 2:
Update to 2.2.0.29
STABLE 3:
Update to 2.2.1.18
STABLE 4:
Update to 3.0.0.8
Fixed cpu hotplug settings (i thought i added it already sry) so it will now work A LOT BETTER
F.A.Q.
OTA
Run in terminal:
Code:
devel-su ssu re 3.0.0.8
devel-su ssu ar adaptation-community http://repo.merproject.org/obs/nemo:/testing:/hw:/motorola:/kinzie/sailfishos_3.0.0.8/
devel-su ssu ar adaptation-community-common http://repo.merproject.org/obs/nemo:/testing:/hw:/common/sailfishos_3.0.0.8/
devel-su zypper clean -a
devel-su zypper ref -f
version --dup
reboot phone
HOW TO REPORT BUG
After bug occurs type in the terminal following commands:
/usr/libexec/droid-hybris/system/bin/logcat
devel-su dmesg
devel-su journalctl
and give me logs from there (do not paste it in the post! Use pastebin.com)
devel-su will ask you for password, you can set it in developer tools.
Many thanks to mal and other people on #sailfishos-porters IRC channel that helped me.
XDA:DevDB Information
SailfishOS, ROM for the Droid Turbo 2
Contributors
Mister_Magister
Source Code: https://github.com/VerdandiTeam
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: SailfishOS
Version Information
Status: Stable
Current Stable Version: 4
Created 2017-08-30
Last Updated 2018-11-10
Reserved
I'd like to see how this works out.
Added Jolla bootlogo
Guys i made idle battery life a lot better. I'll upload build today/tomorrow
UPLOADED
I did not criticize the expensive system, I just wanted to show some screenshots that I took when I installed the OS.
but the forum does not allow new users to post external links with less than 10 postangens.
luccas_bandeira said:
I did not criticize the expensive system, I just wanted to show some screenshots that I took when I installed the OS.
but the forum does not allow new users to post external links with less than 10 postangens.
Click to expand...
Click to collapse
You probably still don't see it. "Selfish" is an insult. Sailfish is an Operating system made by Jolla. Know your typo :highfive:
Mister_Magister said:
You probably still don't see it. "Selfish" is an insult. Sailfish is an Operating system made by Jolla. Know your typo :highfive:
Click to expand...
Click to collapse
wtf.. ._.
Guys i have fixed notification led but you gotta wait for it a bit
Nice
Awesome..
Guys i got bt turned on (nothing else but turning on/off works but it turns on!) And also doing some weird stuff with kernel will try also fix camera recording
AD working?
Is Dalvik working on this port? Someone pointed to this on TMO : here
lfc222222 said:
Is Dalvik working on this port? Someone pointed to this on TMO : here
Click to expand...
Click to collapse
Well Mister1Magister looks like me so dunno think for yourself
next question: do you intend to have Dalvik work on any future device port you are trying to fund?
If so, how do you pick devices? (Ok, that’s 2...)
lfc222222 said:
next question: do you intend to have Dalvik work on any future device port you are trying to fund?
If so, how do you pick devices? (Ok, that’s 2...)
Click to expand...
Click to collapse
Aliendalvik not dalvik that's first. Aliendalvik is avaliable only for official devices, it just happened to work on kinzie too (just needed to change some file). I was planning to port anbox for this and any other device but it's currently almost not working and it's hard :/
How do i choose devices? Well i love motorolas because they're very very easy to port so i'm sure they will work. I'm throwing away brands that i hate/i know sfos would not work on them. My 2 crowdfunding campaigns covers moto x style and huawei p8 lite it was almost choosed by people (i picked them from sailfishos port request page). I'll by for myself from my money moto x 1 and x2 cuz i love them X force was choosed because it was very interesting device and also it's probably one of the most powerful sfos powered device rn so i wanted to show people that not only ultra old devices have sfos but newest ones too (well x force is 2 years old but still have great specs). so yeah once anbox get usable i'll try to port on x force and every device that i have/will have
Well guys my work is freezed until my X Force get repaired
Appreciate your work! Sent a small $5 donation, thanks and hope your device will be repaired soon!
alex3594 said:
Appreciate your work! Sent a small $5 donation, thanks and hope your device will be repaired soon!
Click to expand...
Click to collapse
Yeah thank you very much! It will be used to bring another device!
A question: can this sailfish version on the device be updated OTA to the latest version?
Or will it be stuck at version 2.1.1.26 built5? Many thanks and best wished
Woermel said:
A question: can this sailfish version on the device be updated OTA to the latest version?
Or will it be stuck at version 2.1.1.26 built5? Many thanks and best wished
Click to expand...
Click to collapse
There will be non ota update to 2.1.3 once my phone get fixed. cant do ota untill it gets fixed
xxxxxxxx I did not create these and take no creditxxxxxxxxxx
I compiled this guide to help anyone with a LGK20 phone due to lack of information and newbie Instructions I want to personally thank developers for their hard work. Many of them have stuff in the play store or have PayPal links to show support. (They work hard and I'm sure any little bit helps) You guys rock.
############# Not responsible for bricked devices ############
----------- PHONE INFO ---------
Names: Spirit, LGK20, and TP260.
System: Android 7.1.2
CPU: ARM (needed for Xposed (very cool do try) )
---------------------------------------------
-------------Files and Kits----------------
https://drive.google.com/drive/mobile/folders/10OXHQtyZBCap7PaqiGZEEErmo_th8xFp
--------------------------------------------------------
Your link to google drive I'd empty
Sent from my LG K20 Plus using Tapatalk