I am on Aosp 6.0.1 all of a sudden it rebooted and stuck at boot animation. no matter what i do it will not get past that thing.I have this problem from long time in many roms after using 10-15 days this problem arises.
flash Fastboot Rom
You may have to do a reflash of the ROM, i'm assuming you have a custom recovery installed? You can try flashing over top of your existing installation.
goofball2k said:
You may have to do a reflash of the ROM, i'm assuming you have a custom recovery installed? You can try flashing over top of your existing installation.
Click to expand...
Click to collapse
Happened with me. Try booting in twrp and reboot to system
Related
Whenever I try install a custom rom, my streak never gets past the loading screen after the dell logo. I've tried streakdroid and longhorn both get stuck on a loading screen. How can I get my streak running a custom rom? :/ I've followed all the instructions and I'm not sure what I'm doing wrong.
of course first boot usually takes time to initialized itself... subsequent boot usually only take around 30 - 45 seconds only...
Yes I am aware first boot takes longer, but as I said in my first post, it freezes. It starts the loading process again.
It's seems you flash a custom rom that need mod kernel. To flash mod kernel you have to unlock boot loader.
It happen to me once, stuck at SONY logo.
Try to flash with stock rom, it will be fine (i hope).
frisman said:
It's seems you flash a custom rom that need mod kernel. To flash mod kernel you have to unlock boot loader.
It happen to me once, stuck at SONY logo.
Try to flash with stock rom, it will be fine (i hope).
Click to expand...
Click to collapse
All of the custom ROMs have the correct Kernels built into the ROM.
Did you perforn BOTH factory resets after flashing?
tenorntex said:
All of the custom ROMs have the correct Kernels built into the ROM.
Did you perforn BOTH factory resets after flashing?
Click to expand...
Click to collapse
What other factory reset it there besides the one in clockwork recovery? And how do I do it?
the menu in white text...
1. factory reset
2. software upgrade via update.pkg on sd card
3. screen calibration
4. power off
select 1
though when you do that, all data would be erased....
Beauie said:
What other factory reset it there besides the one in clockwork recovery? And how do I do it?
Click to expand...
Click to collapse
That is your first mistake. You should be using streakmod.
Sent using Longhorn 2.8, ICS Longhorn 1.4.2, and Longhorn Betas
Hello.
So today, I was gonna install a new rom. So the first thing I did was to use the Clockworkmod recovery app on my phone to reboot in to recoverymode, now Im stuck in a weird bootloop where it tries to enter recoverymode but fails then goes back to the samsunglogo, restarts and tries recoverymode again, and it just keeps restarting trying to get in to recoverymode.
I have tried installing another recovery but it does the same no matter what recovery I use.
I have tried removing the battery and putting it back in it still wants to boot in to recovery and it still fails.
Please help me! :/
deus- said:
Hello.
So today, I was gonna install a new rom. So the first thing I did was to use the Clockworkmod recovery app on my phone to reboot in to recoverymode, now Im stuck in a weird bootloop where it tries to enter recoverymode but fails then goes back to the samsunglogo, restarts and tries recoverymode again, and it just keeps restarting trying to get in to recoverymode.
I have tried installing another recovery but it does the same no matter what recovery I use.
I have tried removing the battery and putting it back in it still wants to boot in to recovery and it still fails.
Please help me! :/
Click to expand...
Click to collapse
If you can get into download mode flash stock rom and start again.
tallman43 said:
If you can get into download mode flash stock rom and start again.
Click to expand...
Click to collapse
Hello, after reinstalling the different recoverys a few times I finally got in to it and was able to install another rom, now my phone works.
Thank you though for trying to help!
Be careful, if it's accidently works. I recommend to flash TWRP 2.8.3 by Odin.
1) cm-14.0-20160914-UNOFFICIAL-onyx.zip, 2) cm-14.0-20160917-UNOFFICIAL-onyx.zip
These are the 2 cm14 zips that I tried to flash multiple times (using twrp 3.0.2.0). The flash was successful everytime. But no matter how hard I try, it just won't boot. Just stays stuck on the OnePlus logo for eternity. I just recovered my phone from a soft-brick (no OS, no Recovery) and still continuously trying since days to use cm14.
Please, if anyone can then PLEASE HELP!
amritanshu.sikdar said:
1) cm-14.0-20160914-UNOFFICIAL-onyx.zip, 2) cm-14.0-20160917-UNOFFICIAL-onyx.zip
These are the 2 cm14 zips that I tried to flash multiple times (using twrp 3.0.2.0). The flash was successful everytime. But no matter how hard I try, it just won't boot. Just stays stuck on the OnePlus logo for eternity. I just recovered my phone from a soft-brick (no OS, no Recovery) and still continuously trying since days to use cm14.
Please, if anyone can then PLEASE HELP!
Click to expand...
Click to collapse
Check the bootloader compatibilty of these roms, if they r for the mm bootloader it ll not boot untill u upgrade ur bootloader, check the threads from wer u hv downloaded this...
amritanshu.sikdar said:
1) cm-14.0-20160914-UNOFFICIAL-onyx.zip, 2) cm-14.0-20160917-UNOFFICIAL-onyx.zip
These are the 2 cm14 zips that I tried to flash multiple times (using twrp 3.0.2.0). The flash was successful everytime. But no matter how hard I try, it just won't boot. Just stays stuck on the OnePlus logo for eternity. I just recovered my phone from a soft-brick (no OS, no Recovery) and still continuously trying since days to use cm14.
Please, if anyone can then PLEASE HELP!
Click to expand...
Click to collapse
Most Roms now require you too flash OOS 3.1.3 first. Like mentioned above bootloader issue.
Exodusche said:
Most Roms now require you too flash OOS 3.1.3 first. Like mentioned above bootloader issue.
Click to expand...
Click to collapse
I already flash the OOS 3, but still this problem continues.
File name: OnePlusXOxygen_14_OTA_015_all_201608181615_e03d2112e8ad4bff
Is there any other way how I can manually upgrade my bootloader? That would really help.
amritanshu.sikdar said:
I already flash the OOS 3, but still this problem continues.
File name: OnePlusXOxygen_14_OTA_015_all_201608181615_e03d2112e8ad4bff
Is there any other way how I can manually upgrade my bootloader? That would really help.
Click to expand...
Click to collapse
check out this thread http://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
amritanshu.sikdar said:
I already flash the OOS 3, but still this problem continues.
File name: OnePlusXOxygen_14_OTA_015_all_201608181615_e03d2112e8ad4bff
Is there any other way how I can manually upgrade my bootloader? That would really help.
Click to expand...
Click to collapse
I use Oxygen_14_OTA_18_all but there's a couple files posted on the bootloader upgrade threads that allow you not too flash the whole firmware just the partions you need to upgrade.
i am having same issue i was on oxygenos 3.1.3 firmware when i started to flash nogut roms every nogut rom works except cm. i flashed official cynogenmod 14.1 thinking that problem must have been solved but it wont boot it just shows oneplus logo. i have waited for 30 minutes but nothing happened if something worked out for you please tell me.
Well I've looked around XDA for soultion and this is it.
CM 14 has some Kernel problems, so only what you have to do is just install new kernel as Arsenic or Black Reactor kernel
I was running the new bootloader on cm13 nightlies and couldn't get it to boot either.
Even after a full wipe and reflash with v7 gapps
Gave up in the end and went back to the last cm13 Nightly
flash arsenic kernel after flashing rom and gapps it will boot. Read the posts in ashwin's official cm 14.1 thread.
Flash Black Reactor (recommended) or Arsenic Kernel.
The zip files that you have for CM are the unofficial ones. So I guess they're from Sarthak Narang. Or at least one of them. Those ROMs require the older bootloader to function. So if you have the newer bootloader, it won't work.
As the title says I can't seem to flash any custom roms. I always get stuck at the boot animation. I have unlocked boot loader, installed twrp recovery, and rooted. I'm pretty sure I follow the few custom roms installation instructions correctly. but I always get stuck on the boot screen animation. What am i doing wrong? this is incredibly frustrating This is my first nexus device but not my first time installing custom roms on android. I have the wifi version nexus 9 on latest stock android as of this time.
phillip zanders said:
As the title says I can't seem to flash any custom roms. I always get stuck at the boot animation. I have unlocked boot loader, installed twrp recovery, and rooted. I'm pretty sure I follow the few custom roms installation instructions correctly. but I always get stuck on the boot screen animation. What am i doing wrong? this is incredibly frustrating This is my first nexus device but not my first time installing custom roms on android. I have the wifi version nexus 9 on latest stock android as of this time.
Click to expand...
Click to collapse
Whenever that happens to me I let it sit on boot animation for a couple minutes, then hold power until it reboots again. It usually boots system then.
Thanks for responding ill give that a try after.
I installed Evolution X 5.9 and my Lineage Recovery is missing. I tried to install again the recovery image and it didn't install. I went to bootlooping the fastboot logo. Any help?
What do you mean by bootlooping the fastbokt logo, it won't stay on the fast boot or it keeps cycling
Kenora_I said:
What do you mean by bootlooping the fastbokt logo, it won't stay on the fast boot or it keeps cycling
Click to expand...
Click to collapse
I already solve it. But one thing is not clear to me. When I install PE recovery and install custom rom, after installing the rom, my PE recovery change to Lineage Recovery. How does this happen?
Recovery is currently part of boot.img
The alternative recovery must be on the ramdisk.
haniels6x said:
I already solve it. But one thing is not clear to me. When I install PE recovery and install custom rom, after installing the rom, my PE recovery change to Lineage Recovery. How does this happen?
Click to expand...
Click to collapse
Some roms including recovery installation, Such as Xperience rom when you flash it successfully it will change your recovery to Xperience recovery.
haniels6x said:
I already solve it. But one thing is not clear to me. When I install PE recovery and install custom rom, after installing the rom, my PE recovery change to Lineage Recovery. How does this happen?
Click to expand...
Click to collapse
Cuz Recovery of RMN10 is inside the boot image. Therefore when u flash new ROM, if the Dev placed other Recovery inside boot.img , then ur recovery will be changed to that one.
Oke oke. All good now. Thanks for the help guys! Much appreciated!