Ok, I don't know where to post this, since there is no thread for CM on the v10, but can anyone tell me what happens to the secondary display if you flash CM? Also, how about the dual front cameras, do they work?
there is no CM for Lg V10 how will you flash it ?
There is no CM for the v10 since there is no custom recovery. No custom recovery means you can't flash anything ?
---------- Post added at 04:41 PM ---------- Previous post was at 04:40 PM ----------
There is no CM for the v10 since there is no custom recovery. No custom recovery means you can't flash anything
beavis5706 said:
There is no CM for the v10 since there is no custom recovery. No custom recovery means you can't flash anything
---------- Post added at 04:41 PM ---------- Previous post was at 04:40 PM ----------
There is no CM for the v10 since there is no custom recovery. No custom recovery means you can't flash anything
Click to expand...
Click to collapse
I have a custom recovery, and there is CM for the v10.
If you haven't updated your bootloader/modem too far you can flash cm. But it uses both displays as what it really is. One display. So you'll lose the camera portion of the screen. You'll be missing a block of the status bar and some of the desktop /screen based on your dpi. And you'll definitely have no second screen options and i don't recall what happens with the camera...
There was CM being done but was left unfinished.
It was for H901.
If anyone wants to continue.
Cyanogen Mod 13 For H901 - T-Mobile V10
Double0EK said:
There was CM being done but was left unfinished.
It was for H901.
If anyone wants to continue.
Cyanogen Mod 13 For H901 - T-Mobile V10
Click to expand...
Click to collapse
That was an "unofficial" port for CM13. Meanwhile there is also an "official" release with CM12. This is present on their wiki. Might be a bit behind the bleeding edge, but it is officially supported.
Related
I have seen that there are a couple of roms mentioned by other users, and while I am sure were not allowed to post links, I saw that Vanir has its lollipop rom available, you can download it via the installer in the 4.4.4 rom from engine's thread. Do note that it's better to download, wipe the phone via twrp and then install fresh to this rom. It's been on nightly status for several weeks. Another nightly I recently found was the AICP rom, which recently mentioned in the lounge. I looked all over and cannot find much on it, but it does have great functionality and has nightlies as well. Have you guys found any roms worth looking at?
Check in the tmobile, att verizon or international thread sometimes there are roms that support every veriant
8
asacado said:
I have seen that there are a couple of roms mentioned by other users, and while I am sure were not allowed to post links, I saw that Vanir has its lollipop rom available, you can download it via the installer in the 4.4.4 rom from engine's thread. Do note that it's better to download, wipe the phone via twrp and then install fresh to this rom. It's been on nightly status for several weeks. Another nightly I recently found was the AICP rom, which recently mentioned in the lounge. I looked all over and cannot find much on it, but it does have great functionality and has nightlies as well. Have you guys found any roms worth looking at?
Click to expand...
Click to collapse
My favorite is by Ground Zero - Validus lp. Search Google+. Thanks to @ aheeejd for the recommendation.
Is ground 0 stock or cm 12? Thank you
---------- Post added at 07:17 AM ---------- Previous post was at 07:14 AM ----------
http://forum.xda-developers.com/lg-g3/orig-development/slimlp-t3033808
---------- Post added at 07:20 AM ---------- Previous post was at 07:17 AM ----------
http://forum.xda-developers.com/lg-g3/development/rom-t3025261
http://forum.xda-developers.com/lg-g3/development/rom-blisspop-v2-0-ls990-t3022685
http://forum.xda-developers.com/lg-g3/development/rom-crdroid-t2955012
Some developers are on Google Plus rather than XDA.
Is there like a main location that you can find them?
DU is doing weeklies for the ls990. Check their G+ Community.
1619415 said:
Is ground 0 stock or cm 12? Thank you
AOSP
The other teams may have a build for ls990 but I've seen them stop building or they are not current versions. Example - Du is on 9.1 but our last build is still 9.0. So watch the g+ community updates.
Click to expand...
Click to collapse
Is this rom any good?
http://dwnld.aicp-rom.com/?device=ls990
1619415 said:
Is this rom any good?
http://dwnld.aicp-rom.com/?device=ls990
Click to expand...
Click to collapse
That was my dd until I found validus that is faster and has a dark theme. Use multi ROM and flash everything you find. That way you can reboot into each ROM and compare. Then just delete the ROM you don't like.
Hi Gurus,
I recently installed (an unofficial version of) Resurrection Remix on my Blu Life 8XL. But the StageFright detector claims that the phone is still vulnerable. Since the developer who ported RR to 8XL have not provided any updates, is it possible for me to apply a patch to the stagefright security vulneribility, either from the OS itself (in some form of APK), or from within TWRP?
Thanks.
I also have a blu life 8 xl.... can you send me the link to the rom... i wanna try it
---------- Post added at 08:32 PM ---------- Previous post was at 08:31 PM ----------
and I'd like the link to the twrp Recovery too thanks....
SAURON1230000 said:
I also have a blu life 8 xl.... can you send me the link to the rom... i wanna try it
---------- Post added at 08:32 PM ---------- Previous post was at 08:31 PM ----------
and I'd like the link to the twrp Recovery too thanks....
Click to expand...
Click to collapse
You can find the ROMs, Recoveries and a support group (FWIW) here. Personally I found CM13 most stable, but even that had some nagging issues.
Thanks!!!! I found the same community yesterday lol
Currently running their bliss m latest update (2nd) for my blu life 8 xl L290U........I'm never going back to any other lol
Hello guys I made a custom rom from note 7 ux with some new features to this device.
Hope you will enjoy
Here's the link= Moderator edit link will be replaced when proper information on kernel source,Install instucs And descriptions are given...
Nice one, thanks!
Awesome bro, am so happy that you create this thread ,have been waiting for it, thank you for your great work.
NOTE: I notice you didn't give any instruction on how to install this rom especially for those who are new to your work. Please give instruction on how to install.
---------- Post added at 03:56 PM ---------- Previous post was at 03:36 PM ----------
https://www.youtube.com/watch?v=fBsKgGs71_w&feature=youtu.be
for those who want to see what the rom looks like and the instruction to install watch video and read description on the video above from developer sanjuboy.
---------- Post added at 04:04 PM ---------- Previous post was at 03:56 PM ----------
So after installing this rom on my G550T1 , I didn't have any sound at all but rom was silky smooth and I like it a lot. I know this rom was made for the G550FY ,maybe that why no sound. But could developer Sanjuboy please fix this issue?
Nice Work Bro...
---------- Post added at 10:06 AM ---------- Previous post was at 09:57 AM ----------
Did you try to build or port lineage os for this device???
Thanks
@ßh! said:
Nice Work Bro...
---------- Post added at 10:06 AM ---------- Previous post was at 09:57 AM ----------
Did you try to build or port lineage os for this device???
Thanks
Click to expand...
Click to collapse
thats what everyone wants but its not so easily done
also this works great but no sound
---------- Post added at 01:35 AM ---------- Previous post was at 12:49 AM ----------
maybe this could be adapted to fix the sound issue?
https://forum.xda-developers.com/tm...x-patch-call-audio-fix-t-w8-grace-ux-t3449303
---------- Post added at 01:35 AM ---------- Previous post was at 01:35 AM ----------
i tried running that and rebooting into grace ux and it just bricked my lte connection
jujijoog said:
also this works great but no sound
---------- Post added at 01:35 AM ---------- Previous post was at 12:49 AM ----------
maybe this could be adapted to fix the sound issue?
https://forum.xda-developers.com/tm...x-patch-call-audio-fix-t-w8-grace-ux-t3449303
---------- Post added at 01:35 AM ---------- Previous post was at 01:35 AM ----------
i tried running that and rebooting into grace ux and it just bricked my lte connection
Click to expand...
Click to collapse
so it boot up ok? , just lte connection u had a issue with? ,What model device do u have?
desmond462 said:
so it boot up ok? , just lte connection u had a issue with? ,What model device do u have?
Click to expand...
Click to collapse
i have g550t1 and yes it boots fine and no there was no LTE issue at all. What i meant was i tried flashing the sound fix which broke LTE. Not a surprise as it was written for a diff phone. Just tried it out and restored.
Another thing is at one point i got grace ux working with sound but it was with the first version that OP posted on youtube which has a link that is down.
The way i got it to work was restoring his backup and then installing czarstuperstar's rom over it. Like a dirty flash over it.
I tried this today with the second version of OP's rom which is different from his newest graceux/dreamux mix. It booted up fine and sound even worked but it was very buggy.
Have not tried this method with his newest but i did install it for a while today and it works like a charm minus all sound even call sound.
BTW it was you that commented on sanjuboy's youtube and encouraged him to make this thread right? Thanks for that btw
P.S @sanjuboy have you found any method for getting sound to work on g550t1? Any ideas? I saw a youtube video in another language with a link to a replacement other.xml to be used for fixing bugs in your rom. I tried replacing it and then i deleted another css file that it told me to in the video but it didnt do anything. Also tried installing xposed over your new rom and it caused a bootloop. Does xposed work on it in g550fy? i noticed that root worked fine for me.
jujijoog said:
i have g550t1 and yes it boots fine and no there was no LTE issue at all. What i meant was i tried flashing the sound fix which broke LTE. Not a surprise as it was written for a diff phone. Just tried it out and restored.
Another thing is at one point i got grace ux working with sound but it was with the first version that OP posted on youtube which has a link that is down.
The way i got it to work was restoring his backup and then installing czarstuperstar's rom over it. Like a dirty flash over it.
I tried this today with the second version of OP's rom which is different from his newest graceux/dreamux mix. It booted up fine and sound even worked but it was very buggy.
Have not tried this method with his newest but i did install it for a while today and it works like a charm minus all sound even call sound.
BTW it was you that commented on sanjuboy's youtube and encouraged him to make this thread right? Thanks for that btw
P.S @sanjuboy have you found any method for getting sound to work on g550t1? Any ideas? I saw a youtube video in another language with a link to a replacement other.xml to be used for fixing bugs in your rom. I tried replacing it and then i deleted another css file that it told me to in the video but it didnt do anything. Also tried installing xposed over your new rom and it caused a bootloop. Does xposed work on it in g550fy? i noticed that root worked fine for me.
Click to expand...
Click to collapse
I will try do some of those potential fix and see wat I can come up with, you seems to have greater idea on wat to do, than me on these things. Thank you for your effort, hoping sanjuboy is working on something to fix sound.
I tried to install this on a g550t1 on5 and it looks amazing. But as has been reported NO SOUND.
Does anyone know of any other custom roms for the g550t1 on5? The grace ux looks great, really makes a huge difference.
The superstar rom works fine, but doesn't have the cosmetic flare.
If anyone gets the sound to work please post solution for us all.
Great work by the OP.
Sent from my Rooted Galaxy S7 EDGE on Android 7.0 Nougat, here's the instructions how to do it!
jujijoog said:
thats what everyone wants but its not so easily done
Click to expand...
Click to collapse
I found some methods to build lineage os for this device but I have no experience in building or porting rom....
If someone wants to try then I will post the link........
Thanks!!!
---------- Post added at 10:03 PM ---------- Previous post was at 09:57 PM ----------
I installed on SM-G550FY & its working fine there is no bug on this Grace ux.....
---------- Post added at 10:14 PM ---------- Previous post was at 10:03 PM ----------
The no sound bug on SM-G550T/T1 may be occur due to device varient...
Araltd said:
I tried to install this on a g550t1 on5 and it looks amazing. But as has been reported NO SOUND.
Does anyone know of any other custom roms for the g550t1 on5? The grace ux looks great, really makes a huge difference.
The superstar rom works fine, but doesn't have the cosmetic flare.
If anyone gets the sound to work please post solution for us all.
Great work by the OP.
Sent from my Rooted Galaxy S7 EDGE on Android 7.0 Nougat, here's the instructions how to do it!
Click to expand...
Click to collapse
Hey friends i try every method but i don't know why sound is not working..
So again sorry i cannot help you on this purpose friends
@ßh! said:
I found some methods to build lineage os for this device but I have no experience in building or porting rom....
If someone wants to try then I will post the link........
Thanks!!!
Click to expand...
Click to collapse
um yeah its easy to build linage os if a lineage based rom has been already ported to your phone but that hasnt happened.
the kernel source needs to be worked on is what i understand and i dont really have the time or exp to do that. i have thought about it though and i may do it eventually im just hoping someone that its easier for does it. the kernel is open source but i hear that its very buggy. when you say that you found a method for porting lineage do you mean to this phone specifically or just porting it in general because porting methods are well known but not this for phone in specific
---------- Post added at 10:03 PM ---------- Previous post was at 09:57 PM ----------
[/COLOR]I installed on SM-G550FY & its working fine there is no bug on this Grace ux.....
---------- Post added at 10:14 PM ---------- Previous post was at 10:03 PM ----------
The no sound bug on SM-G550T/T1 may be occur due to device varient...[/QUOTE]
whaaat the hell?
you have metro pcs or t-mobile?
i have metro pcs and it didnt work.
kind of shocked that this worked on t1 as this is a known problem with graceux ports to t-mobile/metropcs variants
im not 100% but i think the only diff between g550t and t1 is the css files and i deleted those and even used a modded one and no luck so i doubt it works on t-mobile but not metropcs. Can you tell me your method for install and any variables that might account for you success?
jujijoog said:
um yeah its easy to build linage os if a lineage based rom has been already ported to your phone but that hasnt happened.
the kernel source needs to be worked on is what i understand and i dont really have the time or exp to do that. i have thought about it though and i may do it eventually im just hoping someone that its easier for does it. the kernel is open source but i hear that its very buggy. when you say that you found a method for porting lineage do you mean to this phone specifically or just porting it in general because porting methods are well known but not this for phone in specific
---------- Post added at 10:03 PM ---------- Previous post was at 09:57 PM ----------
[/COLOR]I installed on SM-G550FY & its working fine there is no bug on this Grace ux.....
---------- Post added at 10:14 PM ---------- Previous post was at 10:03 PM ----------
The no sound bug on SM-G550T/T1 may be occur due to device varient...
Click to expand...
Click to collapse
whaaat the hell?
you have metro pcs or t-mobile?
i have metro pcs and it didnt work.
kind of shocked that this worked on t1 as this is a known problem with graceux ports to t-mobile/metropcs variants
im not 100% but i think the only diff between g550t and t1 is the css files and i deleted those and even used a modded one and no luck so i doubt it works on t-mobile but not metropcs. Can you tell me your method for install and any variables that might account for you success?[/QUOTE]
Method is not for this device its a general method...
& the kernel sources are available on github https://github.com/jcadduono/android_kernel_samsung_universal3475
---------- Post added at 10:53 AM ---------- Previous post was at 10:49 AM ----------
@ßh! said:
whaaat the hell?
you have metro pcs or t-mobile?
i have metro pcs and it didnt work.
kind of shocked that this worked on t1 as this is a known problem with graceux ports to t-mobile/metropcs variants
im not 100% but i think the only diff between g550t and t1 is the css files and i deleted those and even used a modded one and no luck so i doubt it works on t-mobile but not metropcs. Can you tell me your method for install and any variables that might account for you success?
Click to expand...
Click to collapse
Method is not for this device its a general method...
& the kernel sources are available on github https://github.com/jcadduono/android_kernel_samsung_universal3475[/QUOTE]
I don't have metro pcs or t-mobile ....
you should ask the rom developer @sanjuboy for this error...
Guys if you want to port lingage os for galaxy on5 then take j5 lingage os with no problem. Becouse i tried with that os and my phone is boots up with no problem but after showing samsungs logo it again reboot and again so on....
So please have some view on j5 lingage os may be it can work for this device
Thanks
sanjuboy said:
Guys if you want to port lingage os for galaxy on5 then take j5 lingage os with no problem. Becouse i tried with that os and my phone is boots up with no problem but after showing samsungs logo it again reboot and again so on....
So please have some view on j5 lingage os may be it can work for this device
Thanks
Click to expand...
Click to collapse
that is interesting that it even gets to samsung logo. but you are saying after samsung logo it just bootloops?
http://www.gsmarena.com/compare.php3?idPhone1=7184&idPhone2=7648
they have different gpu's i dont think it will be so easy
sanjuboy said:
Guys if you want to port lingage os for galaxy on5 then take j5 lingage os with no problem. Becouse i tried with that os and my phone is boots up with no problem but after showing samsungs logo it again reboot and again so on....
So please have some view on j5 lingage os may be it can work for this device
Thanks
Click to expand...
Click to collapse
it didn't boot up to home screen?, so you couldn't say it boot up ok then if it bootloop at the Samsung logo? ,that still a major issue.
hey guys I'm trying to build a candy rom[7.1.2] for on5 but m not getting a proper kernel source for this device.
I don't have this phone.
My friend said me to build one rom.
So can any one help to find the kernel source
Hritik utekar said:
hey guys I'm trying to build a candy rom[7.1.2] for on5 but m not getting a proper kernel source for this device.
I don't have this phone.
My friend said me to build one rom.
So can any one help to find the kernel source
Click to expand...
Click to collapse
Here is the kernel source
https://github.com/jcadduono/android_kernel_samsung_universal3475
can you try to build lineage os for this device???
sanjuboy said:
Guys if you want to port lingage os for galaxy on5 then take j5 lingage os with no problem. Becouse i tried with that os and my phone is boots up with no problem but after showing samsungs logo it again reboot and again so on....
So please have some view on j5 lingage os may be it can work for this device
Thanks
Click to expand...
Click to collapse
Are you changed boot.img before flash or not ?
I've used a number of different camera apps over the past few months now, and I've had very mixed results. I'm not going to list them all, or keep an indefinite list. I'll just update based on what other people use, and recent builds that work or don't work well for this phone.
The camera quality can actually be really good, considering it wasn't even really a selling point during the campaign. They just need better software to maximize the capabilities of it.
Currently my daily use camera app is:
GoogleCamera_5.3.015.Test - by @Arnova8G2
Everything seems to work very well on this build. I have everything set to default except a few Advanced settings. I enabled 'HDR+ Enhanced for Portrait', 'Disable zoom in portrait mode', and 'Auto-exposure in the Portrait mode'.
Previously I was using:
GoogleCamera-Pixel2Mod-Arnova8G2-V8Final-Test - by @Arnova8G2
That was previously working very well for me, but when I changed over to the next build (after final test), the rear camera was broken. Front-facing cam was fine, but I just had a black screen for the rear camera. So instead of changing back to the 'Final-Test' version, I decided to try out the one I have listed as my current cam.
Please feel free to share what you use, your settings, and you thoughts on the different apps. Whether it's a Google Cam mod, or if it's something from the Play Store. I honestly haven't tried any from the Play Store on this yet. I've only used stock, and the Google Cam ports.
(Be sure to share links and/or credit if it's not your own cam)
Cameras I've had issues with:
GoogleCamera-Pixel2Mod-Arnova8G2-V8 (Rear camera was just a black screen)
If you aren't aware of it, this is a site with a list of all the Google Cam mods:
Google Camera Port List
As far as video is concerned though, Google Cam mods seem to have difficulty while focusing when switching quickly between differing levels of light.
The stock camera appears to handle video better, but is easily beat out in taking pictures.
Harfainx said:
As far as video is concerned though, Google Cam mods seem to have difficulty while focusing when switching quickly between differing levels of light.
The stock camera appears to handle video better, but is easily beat out in taking pictures.
Click to expand...
Click to collapse
What ROM you have mate?
This is on the stock rom currently. Newest build.
Harfainx said:
This is on the stock rom currently. Newest build.
Click to expand...
Click to collapse
But is it RedOS or AOSP one?
Can you show the about phone?
eng.stk said:
But is it RedOS or AOSP one?
Can you show the about phone?
Click to expand...
Click to collapse
Oh, AOSP. I don't have any special skin or anything. The international version.
hi,
Can you port the latest Neovision & Newpower for other nubia phones or any android. I'm using Nubia z9 mini.
---------- Post added at 08:29 AM ---------- Previous post was at 08:28 AM ----------
hi,
Can you port the latest Neovision & Newpower for other nubia phones or any android. I'm using Nubia z9 mini.
Thanks
Any new Google camera version work in nubia red magic
And if i want to use Google camera. Need root smartphone or not. Plz tell me
sandeepkhatri said:
And if i want to use Google camera. Need root smartphone or not. Plz tell me
Click to expand...
Click to collapse
I suppose yes because I have tried to install gcam to my phone also unfortunately force close ,need root to enable API 2 to work and root need unlocked bootloader but in international ROM you can't unlocked bootloader so you have to do it in Chinese rom which I don't like so the conclusion is gcam=root=unlocked bootloader=Chinese Rom!
If I'm wrong please someone correct me because I also want gcam in international ROM!
How to unlock bootloader and enable camera 2api in nubia red magic smartphone. Plz tell me if anyone know
---------- Post added at 05:07 PM ---------- Previous post was at 05:05 PM ----------
No you don't need root to enable camera 2api. Only unlock bootloader need
---------- Post added at 05:08 PM ---------- Previous post was at 05:07 PM ----------
strakell said:
I suppose yes because I have tried to install gcam to my phone also unfortunately force close ,need root to enable API 2 to work and root need unlocked bootloader but in international ROM you can't unlocked bootloader so you have to do it in Chinese rom which I don't like so the conclusion is gcam=root=unlocked bootloader=Chinese Rom!
If I'm wrong please someone correct me because I also want gcam in international ROM!
Click to expand...
Click to collapse
No you don't need root to enable camera 2api. Only unlock bootloader need
sandeepkhatri said:
How to unlock bootloader and enable camera 2api in nubia red magic smartphone. Plz tell me if anyone know
---------- Post added at 05:07 PM ---------- Previous post was at 05:05 PM ----------
No you don't need root to enable camera 2api. Only unlock bootloader need
---------- Post added at 05:08 PM ---------- Previous post was at 05:07 PM ----------
No you don't need root to enable camera 2api. Only unlock bootloader need
Click to expand...
Click to collapse
Unlock bootloader with adb ;
Unlocking bootloader will format my phone?
What's next to enable to enable 2api?
Yes format ur phone. But i need to know how to enable camera 2 api without root
I tried both of the versions you listed in your post along with multiple others and cannot find a gcam port that will even attempt to open beyond instantly gettin an error saying it crashed as soon as I tap on it.
Yes u can install gcam in global rom. Just unlock bootloader. No very difficult task. Go browser and search how to root nubia red magic
---------- Post added at 07:20 AM ---------- Previous post was at 07:14 AM ----------
After that install build prop apk.
My phone state is
Android -: OPM1.WW_Phone-17.2018.2002.29-20200409
Non rooted device,
After update android 10 problem is-:
1)Battery drain fast than android 9
2) Delay charging time
3)video recording lag
4) In camera app noise reduction option not working, it still off.
5) some app not working well or misbehave, may be it is not supported android 10.
6)when I press power button+vol down button to go recovery option but it not there only shows "no command". Means Recovery option missing.
Pls comment anybody same problem happen or any other problem in Android 10
No command problem solved
Speaker sound noisey.. after android 10 update
By downgrading to 9 from 10, solve your issuses.
san_2020 said:
Speaker sound noisey.. after android 10 update
Click to expand...
Click to collapse
By downgrading to 9 from 10, solve your issuses.
Please visit below asus taiwan site.
There is a tool for downgrading.
https://www.asus.com/tw/Phone/ZenFone-Max-Pro-M2/HelpDesk_BIOS/
I hope that you can solve issue.
But I don't want to downgrade hope asus solved the problem next update..but I am enjoying with new version...
Install custom rom
In my case, I made my device root at Android9 of stock rom and install custom rom of Android10. I like the building the custom rom by myself and love "BlissRoms-Next".
---------- Post added at 08:47 PM ---------- Previous post was at 08:04 PM ----------
san_2020 said:
But I don't want to downgrade hope asus solved the problem next update..but I am enjoying with new version...
Click to expand...
Click to collapse
I had installed aproximately 10 kind of custom roms.
As final I found the best Rom with solving the issue at stock rom.
Additionally I can experience many new functions that stock rom does not have.
After flashing Android 10 to pie downgrade zip I am facing ghost touch issues
---------- Post added at 01:13 AM ---------- Previous post was at 01:09 AM ----------
SaburoSiro said:
In my case, I made my device root at Android9 of stock rom and install custom rom of Android10. I like the building the custom rom by myself and love "BlissRoms-Next".
---------- Post added at 08:47 PM ---------- Previous post was at 08:04 PM ----------
I had installed aproximately 10 kind of custom roms.
As final I found the best Rom with solving the issue at stock rom.
Additionally I can experience many new functions that stock rom does not have.
Click to expand...
Click to collapse
Have you built any bug less or minorly buged rom for zenfone max m2 ?
Sorry I build for Max pro m2.
Tolong saya mau downupgred ke pie tetapi tombol volume+power Tidak dapat digunakan untuk memasuki recovery mode di android
Battery draining issue.
Charging issue.
Microphone not working properly.stops working not recording sound in any app or video.
They are not able to provide us stable A10 update.
Praveen2499 said:
Battery draining issue.
Charging issue.
Microphone not working properly.stops working not recording sound in any app or video.
They are not able to provide us stable A10 update.
Click to expand...
Click to collapse
So many bugs in android 10 beta Don't flash it guys
---------- Post added at 04:39 PM ---------- Previous post was at 04:39 PM ----------
osm_amit said:
After flashing Android 10 to pie downgrade zip I am facing ghost touch issues
---------- Post added at 01:13 AM ---------- Previous post was at 01:09 AM ----------
Have you built any bug less or minorly buged rom for zenfone max m2 ?
Click to expand...
Click to collapse
I already said
So many bugs in android 10 beta Don't flash it guys
Take bug report and SMMI test. Then send all reports to [email protected] or else go to asus support contact page send via email us option.