Hi
I have a GT-i9205 which I used to have rooted with megakat (I think) which I gave to a friend, I was given it back in a bootloop state & i would like to try and fix it if possible. Can someone help with the information below?
Boot = Set Warrenty Bit: Kernal & forced reboots
Recovery= Recovery booting Set Warrenty Bit: Recovery & forced reboots
Download Mode: I can enter it & flash but nothing takes effect, I flash CWM recovery or philz_touch_6.48.4-meliusltexx & the process shows pass in odin without errors but i cannot boot into recovery's/stock rom (I9205XXUDOA1)
When device is connected windows recognises it in download mode & is showing in device manager under USB controllers as Samsung mobile USB CDC composite device.
I also tried to flash PIT for i9205 aswell with I9205XXUDOA1 in PDA
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> NON-HLOS.bin
<ID:0/004> aboot.mbn
<ID:0/004> sbl1.mbn
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Related
flashed a rom in a slot instead of stock... so now its all jacked up.. when i try wipe on odin or downgrade i get this (below)
Just tried the nc5 upgrade ap... now it auto boots to recovery and says E: Failed to mount... crap I have work in morning
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> system.img.ext4
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Frustratez said:
flashed a rom in a slot instead of stock... so now its all jacked up.. when i try wipe on odin or downgrade i get this (below)
Just tried the nc5 upgrade ap... now it auto boots to recovery and says E: Failed to mount... crap I have work in morning
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> system.img.ext4
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
UPDATE: Gf walks in says hey try to flash the upgrade then the downgrade... I do it ... s4 set up is now on my screen.. lmao wtf? weird fix but oh well
GALAXY S3 SGH-I747M virgin mobile canada
FIRMWARE UPDATE ISSUE
IT GIVES ME THAT ERROR AND stays on the screen
i used odin to restore my phone :
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
it fails everytime
plz adivse
Hi my Galaxy S6 SM-G920P is bricked from failed root and when i try to install firmware G920PVPU2BOF7 I get this error:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help will be appreciated...
are you using a charging cable.USB charing cable?
Thanks for your response, I already figure it out, I was using the incorrect firmware, download the right pne and works.
So, im trying to install Twrp using Odin but it fails and gives the following error every time. Can you please help me to solve this error or suggest me any other method to install a recovery. Thanks
Odin log:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
when i try to flash my note 9 version sm-960f i found this error
<ID:0/004> Odin engine v(ID:3.1401)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 7774 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> up_param.bin
<ID:0/004> cm.bin
<ID:0/004> keystorage.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> __XmitData_Write
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
any one could help