Hi all
Today i present to u Kali Nethunter supporting OnePlus 2 for the newly released android 7.1 nougat rom.
I'm going to keep this post short an sweet so assuming ur device is prepared and installed latest TWRP, we should be ready
NOTE: This is an overlay-Rom which means that there's no need to wipe system, data, etc...etc...
HOW TO INSTALL:
>First download the zip below and place on the root of ur device.
>Now boot into TWRP recovery (if u forgot is volume down and power) and select install, now select the zip u downloaded and swipe to flash.
>After reboot, head straight to the Nethunter App (Grant Root Access)
>Open Chroot Manager and Grant Root Access then close off and reboot.
Note:If u flashed the one without chroot plz follow the steps below;
>Go to Kali Chroot Manager and Click on Download Latest when Prompted, choose FULL CHROOT. and wait for it to download and then install.
>Once completed u may get a prompt saying to ADD METAPACKAGE and u will see a list to select from. (OPTIONAL)
(Note: Kali Nethunter Metapackage contains everything needed to run NetHunter, so be sure to only add extra metapackages if they're really needed, especially if disk space is running low. U can find out more about Kali Metapackage here.
>select ur desired package and it will download and install so let it do it's ting
>All left to do now to to close off and reboot. That's it:victory::highfive:
Note: Boot may take up to 5 min.
---------------------------------------------------------------------------------------------------------------------------------------------------
UPDATES/FIXES:
>HID support is now working...
I have been working on compiling the kernel to support the HID attacks for the past week and it's now working great.(Let me know how it worked for u) The links below have been updated as of 12/12/2016, but if u already have nethunter installed and dont want to flash the entire rom again, feel to download and flash the kernel from here.
>USB Keyboard keeps stopping error...
If u are having problem with the usb keyboard, uninstall old one and install new one from here.
>Terminal keeps stopping error...
If u are having problem with Terminal, uninstall old one and install new one from here.
>Boot up takes too long...
For some reason boot up takes long so add this line to end of /system/build.prop using ur favourite text editor:
Code:
ro.config.hw_quickpoweron=true
It will take effect after reboot/power on/off.
>Installing cowpatty...
Cowpatty is not required but recommended by wifite and it is not installed, so open a kali terminal an enter:
Code:
apt install cowpatty
>Added oos 3.5.8 support
Have not tested, so u can let me know if works. Fixed... Working now.:good:
>Tested and working on 7.1 nougat based Roms like Resurrection Remix, halogenos, etc...
>Fixed super su brick sensor issue.
>For atheros chip based adapter users who are unable to get their wlan1 up or even shown in the terminal follow these instructions:
1- goto "nethunter terminal" app and tap on "Kali"
2- type "apt-get update"
3- type "apt-get install firmware-atheros"
4- check "airmon-ng" after re-plugging your adapter
>For realtek chip based adapter users who are unable to get their wlan1 up or even shown in the terminal follow these instructions:
1- goto "nethunter terminal" app and tap on "Kali"
2- type "apt-get update"
3- type "apt-get install firmware-realtek"
4- check "airmon-ng" after re-plugging your adapter
>For chips other than (realtek or atheros) users are asked to follow these instructions:
1- goto "nethunter terminal" app and tap on "Kali"
2- type "apt-get update"
3- type "apt-get install firmware-misc-nonfree"
4- check "airmon-ng" after re-plugging your adapter
>Fixed any issues with wireless adapters.
-----------------------------------------------------------------------------------------------------------------------
DOWNLOADS:
No Chroot
Minimal Chroot
Full Chroot
FOR OOS 3.5.8
OOS 3.5.8
GIT SOURCE (KERNEL)
Nougat
OOS 3.5.8
It have been built and tested to be working by me:angel:(see screenshots in attachments)
:goodLZ hit THANKS... I would appreciate it:good:
Version Information-
Status: Stable
Current Stable Version: 3.15.3
Credits
Thanks to the Nethunter Team and those who contributed
Thank you!
Sent from my ONE A2003 using Tapatalk
What is this rom all about ? looks like a bad ass hacking **** rom from watch dogs
VxIA0NGXXV said:
What is this rom all about ? looks like a bad ass hacking **** rom from watch dogs
Click to expand...
Click to collapse
Yep, it a cool hacking rom build to do numerous types of hack such as hacking into wifi ap with security type; wep/wpa2(wps)/wpa(wps) and much more. u can find more info here.
keep up the good work
thank you devs for this rom.
and i'm in love with the bootanimation
sometimes i restart my device just to see the bootanimation
Have you fixed the HID issue?
Sent from my "1+2" powered by Unofficial RR
Compiled by myself
nicesoni_ash said:
Have you fixed the HID issue?
Sent from my "1+2" powered by Unofficial RR
Compiled by myself
Click to expand...
Click to collapse
Not yet
Still working on it
Brandon Indar said:
Not yet
Still working on it
Click to expand...
Click to collapse
well technically you cant fix it unless you compile cm14.1's kernel with this https : // github . com/pelya/android-keyboard-gadget
or we have to wait for a kernel release from the OST "trace github's commits on the nethunter-devices repo"
in order to modify the kernel someone from the OST mentioned the use of mbtool.
:good:
Hi i have installed kali nethunter . give error when start command wifite -required program not found : airodum-ng..how to install airodum any help
pggopani44 said:
Hi i have installed kali nethunter . give error when start command wifite -required program not found : airodum-ng..how to install airodum any help
Click to expand...
Click to collapse
Did u install full chroot or minimal chroot?...
If u installed it then try this
Code:
apt install wifite
Or u will need to uninstall it by
Code:
apt-get remove wifite
and reinstall it by
Code:
apt install wifite
That is strange error I haven't come accross
UPDATE... HID keboard attack now working along with some new fix
Post your git source in op.
Sent from my "1+2" powered by Unofficial RR 7.x.x
Compiled by myself
Why are the files restricted on AFH?
NeoVsk said:
Why are the files restricted on AFH?
Click to expand...
Click to collapse
Sorry bout that...working now
nicesoni_ash said:
Post your git source in op.
Click to expand...
Click to collapse
Will do so... I was bussy.
Is there any particular reason to use SuperSU? It breaks sensors.
NeoVsk said:
Is there any particular reason to use SuperSU? It breaks sensors.
Click to expand...
Click to collapse
U can uninstall it if u want
Everything still works[emoji2]
Sent from my ONE A2005 using Tapatalk
Brandon Indar said:
U can uninstall it if u want
Everything still works[emoji2]
Sent from my ONE A2005 using Tapatalk
Click to expand...
Click to collapse
Sensors were not working after complete SuperSU unroot so I restored the backup, removed script that flashes SuperSU from the zip, reflashed and everything seems to be working! Great job!
NeoVsk said:
Sensors were not working after complete SuperSU unroot so I restored the backup, removed script that flashes SuperSU from the zip, reflashed and everything seems to be working! Great job!
Click to expand...
Click to collapse
Glad it worked?
I might add fast charge support to Kernel later on[emoji6]
Sent from my ONE A2005 using Tapatalk
Brandon Indar said:
Glad it worked🤗
I might add fast charge support to Kernel later on[emoji6]
Sent from my ONE A2005 using Tapatalk
Click to expand...
Click to collapse
The SuperSU problem was in fact trickier than I assumed. Nethunter Terminal didn't work after removing SSU from the zip file so I had to substitue it with a SSU modified by Seraph08 that does not break sensors. Modified SSU is available in here: http://forum.xda-developers.com/oneplus-2/development/6-0-x-cyanogenmod-13-oneplus-2-t3292436
Looking forward to fast charge!
Does the rom include gapps?
Related
This is a kernel module that disables write protection on the system partition while running the stock kernel.
This module was written by @far2 for the htc one M8 and Desire 816 its source code can be found on his git here: https://github.com/flar2/wp_mod
So credit goes to him.
I have just checked to see if it would be compatible and compiled it against A3UL 1.31.401.3 kernel source. It has been tested to load and work fine with all stock kernels.
This is for stock kernels only and is of no use if you are running JMZ kernel. It will allow you to keep your stock kernel (for better compatibility across regional rom versions) but same as JMZ kernel it allows you to modify the system partition and install mods and fixes that will stick through a reboot without having to do them through recovery.
Install instructions
- download latest supersu-install from here https://download.chainfire.eu/696/Su...etrieve_file=1
- download the attached "A3UL_4.4.2-wp_mod.zip"
- reboot to recovery (TWRP)
- Install Supersu-install.zip (a current supersu install is required as one of it's scripts will load the module)
- Install A3UL_4.4.2-wp_mod.zip
- Reboot
To test if the module is loaded you can open Terminal Emulator and type "lsmod" and wp_mod.ko should be in the list of loaded modules.
For a further test you can run the following in Terminal emulator.
su
mount -o remount rw /system
echo "this is a wp_mod test" > /system/wp_mod_test.txt
sync
reboot
Once rebooted check that the /system/wp_mod_test.txt file you just created has stuck through reboot.
MiniBlu
MiniBlu said:
This is a kernel module that disables write protection on the system partition while running the stock kernel.
This module was written by @far2 for the htc one M8 and Desire 816 its source code can be found on his git here: https://github.com/flar2/wp_mod
So credit goes to him.
I have just checked to see if it would be compatible and compiled it against A3UL 1.31.401.3 kernel source. It has been tested to load and work fine with all but the latest at&t kernel (as I don't have a copy of the latest at&t kernel to test it with but I think it should work for it as well).
This is for stock kernels only and is of no use if you are running JMZ kernel. It will allow you to keep your stock kernel (for better compatibility across regional rom versions) but same as JMZ kernel it allows you to modify the system partition and install mods and fixes that will stick through a reboot without having to do them through recovery.
Install instructions
- download latest supersu-install from here https://download.chainfire.eu/696/Su...etrieve_file=1
- download the attached "A3UL_4.4.2-wp_mod.zip"
- reboot to recovery (TWRP)
- Install Supersu-install.zip (a current supersu install is required as one of it's scripts will load the module)
- Install A3UL_4.4.2-wp_mod.zip
- Reboot
To test if the module is loaded you can open Terminal Emulator and type "lsmod" and wp_mod.ko should be in the list of loaded modules.
For a further test you can run the following in Terminal emulator.
su
mount -o remount rw /system
echo "this is a wp_mod test" > /system/wp_mod_test.txt
sync
reboot
Once rebooted check that the /system/wp_mod_test.txt file you just created has stuck through reboot.
MiniBlu
Click to expand...
Click to collapse
Just to be clear...this is not a kernel but a mod for the kernel? And it has not been tested with the latest rom--1.53.502.11? Thats what I'm currently running. Thanks
KLit75 said:
Just to be clear...this is not a kernel but a mod for the kernel? And it has not been tested with the latest rom--1.53.502.11? Thats what I'm currently running. Thanks
Click to expand...
Click to collapse
Thats right. This zip just adds a loadable kernel module(wp_mod.ko) to /system/lib/modules and a script(install-recovery-2.sh) to /system/etc. Once its installed the supersu script will run the script which loads the module during boot. As there has been no major kernel version jump it should work fine with your at&t kernel but I have been unable to test it. If you could test it that would be great. If it doesn't work for you it can be easily removed by just deleteing those 2 files it creates from recovery(or I can post a zip to remove it)
MiniBlu
MiniBlu said:
Thats right. This zip just adds a loadable kernel module(wp_mod.ko) to /system/lib/modules and a script(install-recovery-2.sh) to /system/etc. Once its installed the supersu script will run the script which loads the module during boot. As there has been no major kernel version jump it should work fine with your at&t kernel but I have been unable to test it. If you could test it that would be great. If it doesn't work for you it can be easily removed by just deleteing those 2 files it creates from recovery(or I can post a zip to remove it)
MiniBlu
Click to expand...
Click to collapse
I will but been waiting for a chance to flash the slimrom. Cant believe its been 11 months ive owned this and both your kernel mod and slimrom post on the same day! But most likely ill have a better chance of using yours as a daily driver. Ill probably post results in a few days. Thats usually enough time to give you an accurate bug report.
Btw--if i test slimrom 1st, should i do a full wipe, restore backup then flash kernelmod in one shot?
Still waiting on a response to my gapps question in the other thread...i haven't flashed it yet. Want an opinion on which gapps to use. Theres no link posted and its not mentioned in install instructions.
Thanks, I've had jmz kernel but had a backup of stock kernel and went back to stock because jmz doesn't support exFAT SD cards , I tested it everything is working, FYI European carrier.
Ok so no obvious fix on the headphone issue with slimrom so I'm ready to test this. I just have a few questions
1. Can I just flash it with my stock backup I made earlier today (factory reset, flash rom, flash wp_mod, reboot system)? This backup already has supersu installed, busybox, etc.)
2. I had already made some modifications flashed through recovery and also altered wifi tethering which you helped me with. Do you foresee any problems having it already setup like this or should I just start from scratch?
I guess thats it for now. Actually just asking because you made it a point to flash su even though I'd imagine most people who are here are already running a rooted stock version. Thanks again!
KLit75 said:
Ok so no obvious fix on the headphone issue with slimrom so I'm ready to test this. I just have a few questions
1. Can I just flash it with my stock backup I made earlier today (factory reset, flash rom, flash wp_mod, reboot system)? This backup already has supersu installed, busybox, etc.)
No. That should be fine.
2. I had already made some modifications flashed through recovery and also altered wifi tethering which you helped me with. Do you foresee any problems having it already setup like this or should I just start from scratch?
No. It will have no affect on things that are already installed.
I guess thats it for now. Actually just asking because you made it a point to flash su even though I'd imagine most people who are here are already running a rooted stock version. Thanks again!
Click to expand...
Click to collapse
As long as you have a fairly recently updated supersu install it should be fine. If it's not working for you then just flash the latest supersu and and check again.
MiniBlu
Flashed it just now with my backup and everything went fine. Itll take a few days to find bugs (if any). This is really cool. Thanks!
*****Update****Nice job. Its running as good as ever with no obvious flaws. I did have one random reboot but ive been messing with quite a few xposed mods. Overall, its been excellent for nearly 48 hours. Thanks again.
@MiniBlu has anyone tested your kernel mod with the new slimrom?
KLit75 said:
@MiniBlu has anyone tested your kernel mod with the new slimrom?
Click to expand...
Click to collapse
I don't know. Not that I've heard of anyway. I've been meaning to have a look at it myself but haven't had time yet. From some of what I've read I think changes to the system drive are already sticking on slimrom so I think it might be runing a kernel based on JMZ kernel. I also haven't seen any link to there slimrom device tree or kernel source which hopefully we can find as could really help to finish of the CM builds I've been struggling with.
MiniBlu
I can confirm now slimrom is able to write to system.
Mysterious Magic (G Watch)
The First Custom G Watch ROM Based on the Android 5.1.1 (LDZ22D) OTA
Prerequisites:
Unlocked Bootloader (fastboot oem unlock)
ADB Debugging Enabled (Settings > About > Tap on build number 7 times > Swipe back > Developer Options > Enable ADB Debugging)
Drivers Installed (Windows)
Features:
Rooted out-of-the-gate (su, busybox)
Init.d support built in (/system/etc/init.d)
Improved transitions
Improved speed (slight overclock)
Improved battery life
Increased vibration
Forced GPU rendering
Easy to use installer (Windows, Linux, OSX)
Hotplugging of all 4 cores, as needed
Special Thanks:
invisiblek - For his wonderful custom kernel work!
okibi, arter97, Tomsgt, nagasgura, PlayfulGod, WindyCityRockr, and all other community developers - For their time, effort, and inspiration, in making this watch run faster, better, and even smoother!
All of the community members, watch owners, and rom flashers - Without my amazing users, and the help of this community, none of this would be possible, or even exist!
Donations:
If you happen to like my ROM and find yourself wishing to donate, you can do so by pressing the "Donate to Me" button below my username on the left side of the screen. I spend my free time developing my contributions to the community, and every penny is greatly appreciated!
Changelog:
Version 1.0 r2 (7/12/2015) :
- Removed vibration intensity from the tweaks and added it to it's own seperate file, for end user configuration.
- Removed governor and frequency settings from tweaks and added it to it's own seperate file, for end user configuration.
- Changed the default governor from ondemand to smartmax, to accomodate the kernel included with this rom.
For the best results, refrain from changing the default governor, unless you plan on pairing this rom with a different kernel other than invisiblek's (included).
- Added the ability to change dpi settings.
- Added the ability to enable a specific number of cores (when not using the included kernel).
- Fixed adb, fastboot issues some users were having.
- Major revisions to the installer!
Version 1.0 (7/5/2015) :
- Initial release.
Downloads:
Version 1.0 r2 (md5: 1c2652a3607a53d889c664eec72a37f2)
Mirror 1
Mirror 2
F.A.Q
How do i use the installer?
Extract the archive.
Enter the "Installer" folder.
Enter the folder of the platform you're using (Windows, Linux, or OSX).
Run the installer and follow the on-screen instructions.
Linux and OSX scripts may need the proper permissions in order to run.
Please note: First boot will take some time, and you'll need to re-pair your watch and phone.
How do I edit and install custom settings?
Enter the "Settings" folder.
Open the settings file with the text editor of your choosing.
Make changes to the settings file.
Save the settings file.
Run the installer, select Install Settings, and follow the on-screen instructions.
Questions? Comments? Concerns?
Leave all questions, comments, and concerns below, and I'll be sure to reply as fast as possible!
installer doesnt work
ker2gsr said:
installer doesnt work
Click to expand...
Click to collapse
Which version? Can you screenshot the specific errors?
Sent from my SM-G925P using XDA Free mobile app
MysteriousSparrow said:
Which version? Can you screenshot the specific errors?
Sent from my SM-G925P using XDA Free mobile app
Click to expand...
Click to collapse
that info might help lol yes i was using the wimdows installer im using windows 8 x64 the installer detected my device but when i went to do a reboot it said command anniciated but device didnt reboot into fastboot it went through all format steps and said succesfully flashed rom but device never rebooted to format on flashboot sorry no screen shot i flashed manually
ker2gsr said:
that info might help lol yes i was using the wimdows installer im using windows 8 x64 the installer detected my device but when i went to do a reboot it said command anniciated but device didnt reboot into fastboot it went through all format steps and said succesfully flashed rom but device never rebooted to format on flashboot sorry no screen shot i flashed manually
Click to expand...
Click to collapse
After looking into it, it seems I added an extra unneeded character to the script. I'm reuploading the correct version now, and I'll replace the download link accordingly! Sorry about that!
The fixed version is now uploaded. Give that a try and let me know!
Just installed with windows 10 and installer worked with no problems. Will boot into mint and try installer and report back.
dude1981 said:
Just installed with windows 10 and installer worked with no problems. Will boot into mint and try installer and report back.
Click to expand...
Click to collapse
Thanks! Let me know!
MysteriousSparrow said:
Thanks! Let me know!
Click to expand...
Click to collapse
Installer worked fine on Linux Mint. Will test on watch for a couple days and report back. What kernel is it running?
installed on windows 8 no issues...waiting for sync to test this bad boy out
thanks dev
dude1981 said:
Just installed with windows 10 and installer worked with no problems. Will boot into mint and try installer and report back.
Click to expand...
Click to collapse
dude1981 said:
Installer worked fine on Linux Mint. Will test on watch for a couple days and report back. What kernel is it running?
Click to expand...
Click to collapse
invisiblek's dory kernel
Thanks for the feedback, good to hear the installers are in working order now.
Will download when I get home. Can't wait to try this out...
goast said:
installed on windows 8 no issues...waiting for sync to test this bad boy out
thanks dev
Click to expand...
Click to collapse
Good to hear! Thanks for the feedback!
Report back and let me know what you think!
Ralphyralph said:
Will download when I get home. Can't wait to try this out...
Click to expand...
Click to collapse
Can't wait to hear what you think!
rom working great so far i had already installed manually so i didnt test again for you but others seem to have no issue now great work watch feels more snappier and responsive
ker2gsr said:
rom working great so far i had already installed manually so i didnt test again for you but others seem to have no issue now great work watch feels more snappier and responsive
Click to expand...
Click to collapse
Good to hear! Let me know if you have any concerns or questions in the future, regarding the rom.
Sent from my SM-G925P using XDA Free mobile app
upload
View attachment 3392477 Ok what am I doing wrong?
Hello I write this post to try to asnwer all your questions so I will updating when i get more free time here you go!.
First, we have now fully treble rom (sources can be released soon don't worry).
after this I write some know questions and answers I hope it help us to kill all the doubts
Q&A
Can I flash MIUI oreo in treble build?
No, MIUI doesn't have GSI rom
[*]I can't flash Gapps in GSI how can I fix that?
Well do this, Go to TWRP, Wipe option and go in advance wipe option then select system and tap in repair o change file system
see the screenshots
https://imgur.com/a/NuuuR in the url.
Or flash GSI with Gapps incluided
Which version of PHH's treble rom is compatible with our device?
You can use A Only ARM64
[*] My camera take time to open in GSI roms what is the problem?
Well since we need some libshims they aren't incuided in GSI so the camera takes time open due to the camera daemon take time to be initialized correctly and released from the system calls.
How can I install a treble rom, im in (miui, aex , los, pixel experience, or any other not treble build)
Well some guy writed a tutorial so I link you here: How to install Treble xperience
[*] How can I install treble PHH's rom?
You can use one of this 2 forms:
You can download the system.img then Open CMD (in windows) or Terminal (in Linux) (First of all you must have minimal adb (in windows) or have installed the android tools in linux) If you have it, continue reading, if not, read below that I leave as install
1.- (thermianl or CMD) in the directory where you have the system,img and write For example
Code:
fastboot flash system system-arm64-aonly-vanilla-nosu.img
then reboot to your recovery and wipe data factory reset.
2.- Go to Your TWRP wipe data factory reset
Copy system-arm64-aonly-vanilla-nosu.img inside your internal memory then go to install option and select image and search the image and selec system in the menu and swipe
Reboot and enjoy!.
You are here if you haven't installed the adb and fastbootWindows:
1.- Download minimal adb from here: https://forum.xda-developers.com/showthread.php?t=2317790
2.- Execute the exe and is all.
Linux:
1.- Open a Linux terminal (this is for debian based and debian hahaha (like ubuntu, kubuntu, Linux mint etc)
2.- Write in the termianl:
Code:
sudo apt-get install android-tools-adb android-tools-fastboot
and is all XD easy no?...
I will write more soon.
Good flashing.
reserved idk
Cool tuto
How to flash to miui from treble
HoganSam123 said:
How to flash to miui from treble
Click to expand...
Click to collapse
Via fastboot I think ?
I read about treble support and able to understand it just on paper but on actual usage i'm still blank. I wanna ask how is it helping in our device (land) case and could we get android p beta running as flagships having treble support can run latest android p beta images.
kamalpreetsingh said:
I read about treble support and able to understand it just on paper but on actual usage i'm still blank. I wanna ask how is it helping in our device (land) case and could we get android p beta running as flagships having treble support can run latest android p beta images.
Click to expand...
Click to collapse
yup ,i wanna know it too.
Can i flash normal roms over treblized rom?
The_CelldWeller said:
Can i flash normal roms over treblized rom?
Click to expand...
Click to collapse
Yes but you need to do a clean flash... including system+data+vendor+dalvik+cache.
NaYaB786 said:
Yes but you need to do a clean flash... including system+data+vendor+dalvik+cache.
Click to expand...
Click to collapse
Thanks. It worked.
Storytime ;D
So many people asking for WN722N v2/v3 in the web including myself. I actually bought one extra for nethunter. So because the driver is not included from stock, i compiled it myself.
Here is the driver src link: https://github.com/aircrack-ng/rtl8188eus/
(Compiled driver uploaded below)
Requirements
4.14.83-Re4son-OOS Kernel (is included in 2020.1 Nethunter package) (https://images.offensive-security.com/nethunter/nethunter-oneplus7-oos-pie-kalifs-full-2020.1.zip)
onto OOS 9.5.8 (https://forum.xda-developers.com/oneplus-7/how-to/oneplus-7-repo-oxygen-os-builds-t3937152)
-> I recommend using Pie, since i could not get Q working with Nethunter.
Restore, Unbrick, Downgrade, Upgrade
MSM tool (only OOS): https://forum.xda-developers.com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325
Repo of OOS Builds: https://forum.xda-developers.com/oneplus-7/how-to/oneplus-7-repo-oxygen-os-builds-t3937152
Downgrade package: https://www.getdroidtips.com/how-to...pro/#Download_OnePlus_77_Pro_rollback_package
Warning
Use it at your own risk. This was my first time compiling anything like this... I am not responsible for any kind of damage. Only tested on GM1903!
Installation
Actually i don't know... normally it would get loaded into /system/lib/modules but this folder does not exist for OP7?
I ended up just putting into /storage/emulated/0/ and then loading it with
insmod /storage/emulated/0/8188eu.ko
(/unload) rmmod /storage/emulated/0/8188eu.ko
Activating monitor mode:
airmon check kill
ip link set wlan1 down
iw dev wlan1 set type monitor
If error "No such device -19" simply unload and reload the driver.
Some screenshots (I have a v3)
This is awesome and your work is much appreciated! the guide was clear but I didn't really get the installation part. Could you please clear it up for me, I'm using the global oneplus 7 pro 12 gb ram. do I just place the file into /system/lib/modules or do I have to run an additional command?
danielqf45 said:
This is awesome and your work is much appreciated! the guide was clear but I didn't really get the installation part. Could you please clear it up for me, I'm using the global oneplus 7 pro 12 gb ram. do I just place the file into /system/lib/modules or do I have to run an additional command?
Click to expand...
Click to collapse
In my research i found out, that most are putting it into /system/lib/modules. However this folder does not exist on OP7. I've ended up putting it into /storage/emulated/0/ and then loading the driver with the command already descriped in the tutorial.
If I do that, and have the adapter connected my phone reboots.
What does it do?
* Your warranty is now void.
* Im not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame me or XDA and its respected developers.
SpiderBlood Kernel for Pixel 3/3XLFeatures:
Atheros adapters suppport
Realtek adapters support (including 88XXAU)
Ralink adapters support
Bluetooth USB adapters support
Internal bluetooth support
Ethernet adapters support
SDR support
Injection
HID
USB Arsenal
NetHunter supported wireless cards: https://www.kali.org/docs/nethunter/wireless-cards/
Tested wireless cards: AWUS1900
Supported android version: 12,13 (PixelDust ROM)
Kernel base source: https://github.com/freak07/Kirisakura_bluecross/
Installation steps
First we need to remove encryption from our phone, pixel 3 is a slot device so we need to flash this in TWRP and format data (Advanced -> format data -> yes)
Next we need to do initial setup, skip pattern lock, install magisk app (magisk is already installed after flashing DSE NEO, but the app is missing) magisk
Now we can flash kernel in TWRP
If you want to use latest nethunter terminal app that is based on neoterm instead of crappy nh terminal you need to build terminal and nethunter apps in android studio and install them on your phone
Navigate to nethunter chroot manager now, and install full kalifs
Download firmware files from here, go to root shell and enter
Code:
mount -o rw,remount /
and copy all files inside firmware folder to /vendor/firmware. You can use any root expoler app or copy it using terminal
That's it! You have working nethunter device with all features supported now!mount -o rw,remount /
Will this work on any other roms????
S_K_I_P said:
Will this work on any other roms????
Click to expand...
Click to collapse
It should work on aosp based ROMs, but you need to check it
cr4sh-lab said:
It should work on aosp based ROMs, but you need to check it
Click to expand...
Click to collapse
Is it only works with Kirisakura based rom??
S_K_I_P said:
Is it only works with Kirisakura based rom??
Click to expand...
Click to collapse
No, kirisakura is based on stock kernel source I think, you need to check
I installed it on Evolution X 7.6.2 because there is Android 13 support, but unfortunately, Google logo comes out and it boot with the bootloader
Reatmos said:
I installed it on Evolution X 7.6.2 because there is Android 13 support, but unfortunately, Google logo comes out and it boot with the bootloader
Click to expand...
Click to collapse
Does the Nethunter works with internal bluetooth ?
NSAHacker said:
Does the Nethunter works with internal bluetooth ?
Click to expand...
Click to collapse
Yes, its using bluebinder to attach interface and you can use it
cr4sh-lab said:
Yes, its using bluebinder to attach interface and you can use it
Click to expand...
Click to collapse
Nice, But last time I installed Kirisakura Kernel. It didn't required to even Disable Encryption and Dealing with Partitions and I think It even preserved Magisk Installation. I hope you get the idea what I am saying
NSAHacker said:
Nice, But last time I installed Kirisakura Kernel. It didn't required to even Disable Encryption and Dealing with Partitions and I think It even preserved Magisk Installation. I hope you get the idea what I am saying
Click to expand...
Click to collapse
Yeah, but I had problems with them on my pixel 3 and 4a, so I posted these instructions.
Nice, I would Love to give it a Try for Sure.
Thanks for info
Does this kernel support KernelSU?
Enchanter7402485097 said:
Does this kernel support KernelSU?
Click to expand...
Click to collapse
Check kirisakura kernel features, if not - then there's no KernelSU support, because I don't added it too
Thanks for your reply
cr4sh-lab said:
Check kirisakura kernel features, if not - then there's no KernelSU support, because I don't added it too
Click to expand...
Click to collapse
Thanks for your reply
Since i already have the Kirisakura kernel installed, can i just install this over it?
ph0sgene said:
Since i already have the Kirisakura kernel installed, can i just install this over it?
Click to expand...
Click to collapse
Yes
is it allowed to flash this kernel if I have a13 rom
Yes, supported android version: 12,13 (PixelDust ROM) check pixeldust rom first
cr4sh-lab said:
* Your warranty is now void.
* Im not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame me or XDA and its respected developers.
SpiderBlood Kernel for Pixel 3/3XLFeatures:
Atheros adapters suppport
Realtek adapters support (including 88XXAU)
Ralink adapters support
Bluetooth USB adapters support
Internal bluetooth support
Ethernet adapters support
SDR support
Injection
HID
USB Arsenal
NetHunter supported wireless cards: https://www.kali.org/docs/nethunter/wireless-cards/
Tested wireless cards: AWUS1900
Supported android version: 12,13 (PixelDust ROM)
Kernel base source: https://github.com/freak07/Kirisakura_bluecross/
Installation steps
First we need to remove encryption from our phone, pixel 3 is a slot device so we need to flash this in TWRP and format data (Advanced -> format data -> yes)
Next we need to do initial setup, skip pattern lock, install magisk app (magisk is already installed after flashing DSE NEO, but the app is missing) magisk app
Our device have Read-Only filesystem so we need to flash this in TWRP, and use default options
Now we can flash kernel in TWRP
If you want to use latest nethunter terminal app that is based on neoterm instead of crappy nh terminal you need to build terminal and nethunter apps in android studio and install them on your phone
Navigate to nethunter chroot manager now, and install full kalifs
Download firmware files from here, go to root shell and enter
Code:
mount -o rw,remount /
and copy all files inside firmware folder to /vendor/firmware. You can use any root expoler app or copy it using terminal
That's it! You have working nethunter device with all features supported now!mount -o rw,remount /
Click to expand...
Click to collapse
Step 3 << Can i done this by OverlayFS module?? If i don't do this what error could be happened??