Related
I am about to unlock the bootloader but im confused about the TWRP flashing...
I went through the newbie guide and see that we have flash Universal Boot Img Patcher (UBP) after flashing MIUI Recovery ROM Zip
I am confused about the MIUI Recovery ROM Zip... Which ROM is that.??
I am currently on MIUI Global 8.0 Stable (8.0.6.0). Can i just unlock bootloader and flash TWRP and Supersu
Please someone help me with step by step guide to unlock and root this phone...(Unlocking Moto seems easy)
$lim $hady said:
I am about to unlock the bootloader but im confused about the TWRP flashing...
I went through the newbie guide and see that we have flash Universal Boot Img Patcher (UBP) after flashing MIUI Recovery ROM Zip
I am confused about the MIUI Recovery ROM Zip... Which ROM is that.??
I am currently on MIUI Global 8.0 Stable (8.0.6.0). Can i just unlock bootloader and flash TWRP and Supersu
Please someone help me with step by step guide to unlock and root this phone...(Unlocking Moto seems easy)
Click to expand...
Click to collapse
you can try to unlock directly at your current stable rom, somebody able to do it while i can't do it and should move to dev rom to unlock.
if you failed to do it at current rom, you can move to dev rom using miflash and ofc using fastboot rom. if you should move to dev rom to unlock, choose LP rom since MM rom have forced encryption feature by default.
OK.. suppose now I unlocked the bootloader... wat should I do to flash twrp and root the phone.. should I just flash tarp and supersu or should I need to flash anything else... please help me step by step after unlocking bootloader...
follow lolipop unlock process Replace emmc_appsboot.mbn in dev rom and flash via mi flash done,
fastboot oem unlock-go
fastboot flash recovery recovery name.img
then flash radon latest marshmallow version and then flash supersu 2.76 done, its work for me,
$lim $hady said:
I am about to unlock the bootloader but im confused about the TWRP flashing...
I went through the newbie guide and see that we have flash Universal Boot Img Patcher (UBP) after flashing MIUI Recovery ROM Zip
I am confused about the MIUI Recovery ROM Zip... Which ROM is that.??
I am currently on MIUI Global 8.0 Stable (8.0.6.0). Can i just unlock bootloader and flash TWRP and Supersu
Please someone help me with step by step guide to unlock and root this phone...(Unlocking Moto seems easy)
Click to expand...
Click to collapse
This may give you method for rooting...
And for installing cm13 ROM too... With proof...
It worked for me .. I did the same...
First
download the required files from the given link: [50mb]
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
any rom could be installed after it by the same proccess.
you would beome comfortable in doing all this after once trying/.
if you even brick your phone there would always be a way out.
search it on youube.
because everything occurs in partitions , you think hat you have bricked but actually not. there's always a safe way out
---------- Post added at 05:19 PM ---------- Previous post was at 05:17 PM ----------
Do the above method till rooting and installing TWRP.
If you want to install cm14.1 for redmi note 3:
Follow this thread:
http://forum.xda-developers.com/redm...459382/page330
[email protected] said:
This may give you method for rooting...
And for installing cm13 ROM too... With proof...
It worked for me .. I did the same...
First
download the required files from the given link: [50mb]
https://drive.google.com/file/d/0B81...w?usp=drivesdk
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
See the following overview video after installing the CM13 ROM:
https://www.youtube.com/watch?v=T--f7ClmQVM
any rom could be installed after it by the same proccess.
you would beome comfortable in doing all this after once trying/.
if you even brick your phone there would always be a way out.
search it on youube.
because everything occurs in partitions , you think hat you have bricked but actually not. there's always a safe way out
---------- Post added at 05:19 PM ---------- Previous post was at 05:17 PM ----------
Do the above method till rooting and installing TWRP.
If you want to install cm14.1 for redmi note 3:
Follow this thread:
http://.xda-.com/redm...459382/page330
Click to expand...
Click to collapse
How we can flash twrp without unlocking bootloder as you say, first flash twrp then unlock Bootloader it's Not posible,
XN Logos said:
How we can flash twrp without unlocking bootloder as you sat, first flash twrp then unlock Bootloader it's Not posible,
Click to expand...
Click to collapse
Both can be done.
Vice versa is also possible.
OK then click unlock bootloader first and then flash twrp.
The reverse can also be done. I did the reverse and I was amazed so thought I should as this to my tutorial
[email protected] said:
Both can be done.
Vice versa is also possible.
OK then click unlock bootloader first and then flash twrp.
The reverse can also be done. I did the reverse and I was amazed so thought I should as this to my tutorial
Click to expand...
Click to collapse
1. bro drive link you provided say file does not exist..............
2. do we have to follow all your steps every time for flashing rom???
Sorptarn said:
1. bro drive link you provided say file does not exist..............
2. do we have to follow all your steps every time for flashing rom???
Click to expand...
Click to collapse
Sorry I accidently removed the link.
I also deleted my review video of YouTube .
I will upload it and get you the link
---------- Post added at 11:08 AM ---------- Previous post was at 11:03 AM ----------
Sorptarn said:
1. bro drive link you provided say file does not exist..............
2. do we have to follow all your steps every time for flashing rom???
Click to expand...
Click to collapse
Once unlocked bootloader and flash twrp.
You don't have to take help of PC or any other thing.
You can always do it on the phone itself.
Boot into twrp by pressing upper volume and power button.
Wipe everything except storages (internal or external)
And then install the ROM zip file and gapps file accordingly.
Do it for any rom
---------- Post added at 11:20 AM ---------- Previous post was at 11:08 AM ----------
Wait uploading the file...
---------- Post added at 11:26 AM ---------- Previous post was at 11:20 AM ----------
Bro file uploaded.
Take it and enjoy.
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
---------- Post added at 11:29 AM ---------- Previous post was at 11:26 AM ----------
XN Logos said:
How we can flash twrp without unlocking bootloder as you say, first flash twrp then unlock Bootloader it's Not posible,
Click to expand...
Click to collapse
New link updated for root files
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
@[email protected] bro ye global stable miui8 lp mein kaam krega na.............
Sorptarn said:
@[email protected] bro ye global stable miui8 lp mein kaam krega na.............
Click to expand...
Click to collapse
any rom can be install from phone through twrp directly but this is for rom other than miui.
if you install the global stable miui 8 official then its gone. your phone will brick. the bootloader, since is unofficially unlocked, your phone would stuck at mi logo.
now if you wanna install miui rom without any such kinda loss, you see this video: the madthing he explained everything.
download a patched miui 8 rom that will support unofficially unlocked bootloader and will not cause any problem. and it supprts volte too.
or if you want the real miui 8 global rom back . this has to be done by pc.
Install miui 8 patched directly from twrp recovery. [easy one with extra features and safe and volte supported]
https://www.youtube.com/watch?v=B1U1T5gBzbI
Or install the stable miui 8 global offiical rom by pc method. doing everything again. [hard one, success not guaranteed but mostly works. follow each step correctly]
https://www.youtube.com/watch?v=YijIOh9b3mY
his would definetly help you.
do give a thumbs up if you found it helpful
[email protected] said:
any rom can be install from phone through twrp directly but this is for rom other than miui.
if you install the global stable miui 8 official then its gone. your phone will brick. the bootloader, since is unofficially unlocked, your phone would stuck at mi logo.
now if you wanna install miui rom without any such kinda loss, you see this video: the madthing he explained everything.
download a patched miui 8 rom that will support unofficially unlocked bootloader and will not cause any problem. and it supprts volte too.
or if you want the real miui 8 global rom back . this has to be done by pc.
Install miui 8 patched directly from twrp recovery. [easy one with extra features and safe and volte supported]
https://www.youtube.com/watch?v=B1U1T5gBzbI
Or install the stable miui 8 global offiical rom by pc method. doing everything again. [hard one, success not guaranteed but mostly works. follow each step correctly]
https://www.youtube.com/watch?v=YijIOh9b3mY
his would definetly help you.
do give a thumbs up if you found it helpful
Click to expand...
Click to collapse
Thnx fr the update..........
Bt was asking that im currently on miui 8 stable lp........ Th unlock krne k lie miui dev rom th flash nhi krni......
First try this the process I have suggested and given instructions. If any problem comes I would help.
It can alone unlock bootloader. No need to install global kenzo ROM.
I would help just text me
[email protected] said:
First try this the process I have suggested and given instructions. If any problem comes I would help.
It can alone unlock bootloader. No need to install global kenzo ROM.
I would help just text me
Click to expand...
Click to collapse
Tried to unlock bootloader, but the stuck at 50% saying unable to verify device something.. so tried logging into micloud and making hte device active.
Will try it today.
So after unlocking bootloader, just flash TWRP using adb commmands and flash SuperSU??
abihary said:
you can try to unlock directly at your current stable rom, somebody able to do it while i can't do it and should move to dev rom to unlock.
if you failed to do it at current rom, you can move to dev rom using miflash and ofc using fastboot rom. if you should move to dev rom to unlock, choose LP rom since MM rom have forced encryption feature by default.
Click to expand...
Click to collapse
Thank you... I tried to unlock it on global stable rom but not able to do it(stuck a 50%)
Can i just download and 6.9.15 global developer rom and flash it using updater and try unlocking the bootloader or is it necessary to flash fastboot rom only.
If yes, please provide the link for lollipop fastboot rom
$lim $hady said:
Thank you... I tried to unlock it on global stable rom but not able to do it(stuck a 50%)
Can i just download and 6.9.15 global developer rom and flash it using updater and try unlocking the bootloader or is it necessary to flash fastboot rom only.
If yes, please provide the link for lollipop fastboot rom
Click to expand...
Click to collapse
better go to global dev LP to avoid problem with data encryption at global dev MM.
you can download it from this link
abihary said:
better go to global dev LP to avoid problem with data encryption at global dev MM.
you can download it from this link
Click to expand...
Click to collapse
Thanks for the link. Downloading it now..could you please provide the steps to flash this file or a link which helps in flashing fastboot rom...
once i have flashed, just unlock it and flash twrp and supersu.
Any other steps to flash cm 13 or 14..??
$lim $hady said:
Tried to unlock bootloader, but the stuck at 50% saying unable to verify device something.. so tried logging into micloud and making hte device active.
Will try it today.
So after unlocking bootloader, just flash TWRP using adb commmands and flash SuperSU??
Click to expand...
Click to collapse
Yeah
---------- Post added at 10:09 AM ---------- Previous post was at 10:03 AM ----------
[email protected] said:
Yeah
Click to expand...
Click to collapse
If you do it by installing global dev kenzo ROM by mi flash then it may get stuck at 50-60℅ as happened to many here.
I have also experienced it. It got stuck at 40℅. It may happen.
It can say not enough memory to continue or whatever ****.
Leave it don't panic. The ROM has partially been installed.
Now cmtry power off. Or click on boot edl mode. Now directly click unlock bootloader .bat file which I provided. And then click on flash twrp. Bat file.
You phone will automatically boot into twrp and now go last tab of last second row, got to globe icon and change language and now go back and wipe everything.
No wiping internal storage if you have kept any ROM there. But I suggest wipe everything.
Insert a micro SD card or USB otg containing any ROM (because you need to boot up at least) and then flash it along with proper gapps.
---------- Post added at 10:12 AM ---------- Previous post was at 10:09 AM ----------
You phone will boot up and now if you want you can go again to twrp and install a proper ROM of your choice. Or if you want stay there. Boot loader unlocked twrp flashed and everything done.
[email protected] said:
Yeah
---------- Post added at 10:09 AM ---------- Previous post was at 10:03 AM ----------
If you do it by installing global dev kenzo ROM by mi flash then it may get stuck at 50-60℅ as happened to many here.
I have also experienced it. It got stuck at 40℅. It may happen.
It can say not enough memory to continue or whatever ****.
Leave it don't panic. The ROM has partially been installed.
Now cmtry power off. Or click on boot edl mode. Now directly click unlock bootloader .bat file which I provided. And then click on flash twrp. Bat file.
You phone will automatically boot into twrp and now go last tab of last second row, got to globe icon and change language and now go back and wipe everything.
No wiping internal storage if you have kept any ROM there. But I suggest wipe everything.
Insert a micro SD card or USB otg containing any ROM (because you need to boot up at least) and then flash it along with proper gapps.
---------- Post added at 10:12 AM ---------- Previous post was at 10:09 AM ----------
You phone will boot up and now if you want you can go again to twrp and install a proper ROM of your choice. Or if you want stay there. Boot loader unlocked twrp flashed and everything done.
Click to expand...
Click to collapse
Thanks but i don want to unlock it unofficially.. unless its not possible to unlock it officially..
$lim $hady said:
Thanks but i don want to unlock it unofficially.. unless its not possible to unlock it officially..
Click to expand...
Click to collapse
Wait for 1 or 2 weeks then.
And not sure whether it will accept your request or not. OK .
Welcome
MODS: Please move this question to the HELP section - incorrectly posted. Thanks.
Hello,
I am trying to root the Global MIUI _V10.2.1.0.PECMIXM ROM using Magisk. I want my phone to remain encrypted, and having spent all day today trying to achieve this, I am turning here for help.
I have tried flashing via Fastboot and TWRP, have tried flashing Disable DMVerity (without disabling the force encryption) before, and after flashing Magisk. I hava managed to get Magisk 18 flashed and able to boot to the ROM, but when I open Magisk Manager (Installed by the flash) it updates itself and says it needs to install Magisk, proposing to download it - or patch boot img.
Every time I try to flash the downloaded zip, or try fastboot flashing the modified boot.img, the phone won't boot - it just ends up in TWRP recovery.
I have wiped data 100s of times to try to fix this, to no avail.
I have tried to boot into TWRP without flashing it, but this just hands on the TWRP flash screen every time.
Any help / tips would be appreciated.
Were you following any tutorial post? Recent xiaomi phones come with more strict policy on bootload locks. I'm not familiar with it, but if I didn't misunderstand, without BL unlock it's kinda dangerous to flash anything on the phone.
msg7086 said:
Were you following any tutorial post? Recent xiaomi phones come with more strict policy on bootload locks. I'm not familiar with it, but if I didn't misunderstand, without BL unlock it's kinda dangerous to flash anything on the phone.
Click to expand...
Click to collapse
Thanks for replying. Yes, following tutorials, have unlocked my bootloader and can flash ROMs, just cannot get the latest MIUI 10 Global Stable rooted, without decrypting the phone. I have managed it on the Xiaomi.eu global stable, but not with the original Stock ROM.
Has anyone succeeded?
hello bro, u can try my way.
NEED:
unlock bootloader.
folder ADB / u can download all in my GG driver or internet from other source if u scare virus (^o^)
twrp / u can download all in my GG driver or internet from other source if u scare virus (^o^)
diver ADB / u can download all in my GG driver or internet from other source if u scare virus (^o^)
PREPARING:
download and copy to phone store and folder ADB
u should rename file TWRP with short name, any name u can remember. (ex: twrp.img or aaa.img, etc....)
install diver for PC/ LAP, u can try to plug mi phone in case FASTBOOT and check in DEVICE MANAFER of PC/ LAP.
remember ENABLE USB debugging on phone
OK, ACTION:
open CMD/ command window in folder ADB (u can put this folder at any diver on PC / LAP) with right click at this folder.
type all commands, follow with contrucs:
adb reboot bootloader (past this if u are in BL)
choose 1 in 2 ways:
1.
fastboot flash recovery twrp.img (do it to install recovery cook replace recovery stock)
fastboot flash misc misc.bin (do this line if u use stock folder china - TWRP-3.2.3-1202-XIAOMI8UD-CN-wzsx150-fastboot.7z)
fastboot boot twrp.img (do it for reboot to recover cook)
2.
fastboot boot twrp.img (do it, u use recovery temporary recovery cook and very easy, find file recovery, install it)
(test again by to use temporary reovery, reboot to recovery again)
note: i like second way, very easy and fast with pro person (^o^)
i tested in all miui stock (china, global)
HAVE FUN \(^o^)/
this link for all
https://drive.google.com/open?id=1uT8g1oOOkD27P2fylNzlAlXrT8PbCJEs
do note use it if u scare virus, malware, etc........ \(^o^)/
reply me if u can not apply all or do not dowload my GG driver.
u can read and do all with this stock link in miui en (http://en.miui.com/thread-3671565-1-1.html)
t4manh198E said:
hello bro, u can try my way.
NEED:
unlock bootloader.
folder ADB / u can download all in my GG driver or internet from other source if u scare virus (^o^)
twrp / u can download all in my GG driver or internet from other source if u scare virus (^o^)
diver ADB / u can download all in my GG driver or internet from other source if u scare virus (^o^)
PREPARING:
download and copy to phone store and folder ADB
u should rename file TWRP with short name, any name u can remember. (ex: twrp.img or aaa.img, etc....)
install diver for PC/ LAP, u can try to plug mi phone in case FASTBOOT and check in DEVICE MANAFER of PC/ LAP.
remember ENABLE USB debugging on phone
OK, ACTION:
open CMD/ command window in folder ADB (u can put this folder at any diver on PC / LAP) with right click at this folder.
type all commands, follow with contrucs:
adb reboot bootloader (past this if u are in BL)
choose 1 in 2 ways:
1.
fastboot flash recovery twrp.img (do it to install recovery cook replace recovery stock)
fastboot flash misc misc.bin (do this line if u use stock folder china - TWRP-3.2.3-1202-XIAOMI8UD-CN-wzsx150-fastboot.7z)
fastboot boot twrp.img (do it for reboot to recover cook)
2.
fastboot boot twrp.img (do it, u use recovery temporary recovery cook and very easy, find file recovery, install it)
(test again by to use temporary reovery, reboot to recovery again)
note: i like second way, very easy and fast with pro person (^o^)
i tested in all miui stock (china, global)
HAVE FUN \(^o^)/
this link for all
https://drive.google.com/open?id=1uT8g1oOOkD27P2fylNzlAlXrT8PbCJEs
do note use it if u scare virus, malware, etc........ \(^o^)/
reply me if u can not apply all or do not dowload my GG driver.
u can read and do all with this stock link in miui en (http://en.miui.com/thread-3671565-1-1.html)
Click to expand...
Click to collapse
Thanks for replying. However, this tells me how to flash TWRP, how to boot to TWRP - I have no problem doing that whatsoever. I can successfully do that again and again.
What I have not been able to do is flash Magisk v18 on v10 stock ROM and be able to boot successfully. It bootloops into TWRP.
My post help u to install twrp or flash twrp
I do not know your mean what is flash twrp !?
Reboot to recov cook by press volumn +/- and power button
Use magisk 17.1 stanle, u can find it in my gg driver or download in miui eu 's page
---------- Post added at 05:03 AM ---------- Previous post was at 05:02 AM ----------
nealed said:
Thanks for replying. However, this tells me how to flash TWRP, how to boot to TWRP - I have no problem doing that whatsoever. I can successfully do that again and again.
What I have not been able to do is flash Magisk v18 on v10 stock ROM and be able to boot successfully. It bootloops into TWRP.
Click to expand...
Click to collapse
1 in 2 ways is certainly successful
nealed said:
Thanks for replying. However, this tells me how to flash TWRP, how to boot to TWRP - I have no problem doing that whatsoever. I can successfully do that again and again.
What I have not been able to do is flash Magisk v18 on v10 stock ROM and be able to boot successfully. It bootloops into TWRP.
Click to expand...
Click to collapse
Hey, I'm success root my mi 8 pro (Android 9 V10.2.1.0.PECMIXM - MIUI 10)
If you know how to use TWRP, now just reboot your mi 8 pro to TWRP
and then choose Mount > check system & vendor.
Then flash the Latest Version of magisk (v18.1)
REMEMBER : TO MOUNT >> CHECK SYSTEM & VENDOR. AFTER THAT JUST FLASH MAGISK. ONLY MAGISK !!!
And then reboot to your system.
After that, download the latest versio of Magisk Manager, install it and open it.
And BOOOOM~
Your Mi 8 Pro just rooted.
nfadrizp said:
Hey, I'm success root my mi 8 pro (Android 9 V10.2.1.0.PECMIXM - MIUI 10)
If you know how to use TWRP, now just reboot your mi 8 pro to TWRP
and then choose Mount > check system & vendor.
Then flash the Latest Version of magisk (v18.1)
REMEMBER : TO MOUNT >> CHECK SYSTEM & VENDOR. AFTER THAT JUST FLASH MAGISK. ONLY MAGISK !!!
And then reboot to your system.
After that, download the latest versio of Magisk Manager, install it and open it.
And BOOOOM~
Your Mi 8 Pro just rooted.
Click to expand...
Click to collapse
I rooted firsr u
nd now i am using mi mix 3 ???
Unofficial TWRP has been released, it is tested, can be used can be touched
REQUIREMENT :
- Already UNLOCK BOOTLOADER
- Your PC already installed adb&fastboot driver
-If you cannot enter the cycle boot, please refer to: https://forum.xda-developers.com/re...access-redmi-9-mediatek-t4149531（-vbmeta.img）
How to:
STEP 1
- Backup Always Recommended
-Turn off the phone-then press the volume down button + power on button to enter fastboot
-Then plug in the data cable (provided that your phone is correctly installed with the adb driver) and run the redmi9 one-key flashing tool
-Wait for the phone to enter recovery and you're done
note:
My device China version redmin9
Download （Download link may require vpn）：new
TWRP-3.4.2BREDMI9.rar - 蓝奏云
文件大小：31.8 M|
wwa.lanzous.com
lkj00 said:
Unofficial TWRP has been released, it is tested, can be used can be touched
REQUIREMENT :
- Already UNLOCK BOOTLOADER
- Your PC already installed adb&fastboot driver
-If you cannot enter the cycle boot, please refer to: https://forum.xda-developers.com/re...access-redmi-9-mediatek-t4149531（-vbmeta.img）
How to:
STEP 1
- Backup Always Recommended
-Turn off the phone-then press the volume down button + power on button to enter fastboot
-Then plug in the data cable (provided that your phone is correctly installed with the adb driver) and run the redmi9 one-key flashing tool
-Wait for the phone to enter recovery and you're done
note:
My device China version redmin9
Download （Download link may require vpn）：
https://wwa.lanzous.com/iXvkCgnha5g
Click to expand...
Click to collapse
Is your device boot successfully without any problem
I think it is not safe to flash this recovery in global version ROM...
lkj00 said:
Unofficial TWRP has been released, it is tested, can be used can be touched
REQUIREMENT :
- Already UNLOCK BOOTLOADER
- Your PC already installed adb&fastboot driver
-If you cannot enter the cycle boot, please refer to: https://forum.xda-developers.com/re...access-redmi-9-mediatek-t4149531（-vbmeta.img）
How to:
STEP 1
- Backup Always Recommended
-Turn off the phone-then press the volume down button + power on button to enter fastboot
-Then plug in the data cable (provided that your phone is correctly installed with the adb driver) and run the redmi9 one-key flashing tool
-Wait for the phone to enter recovery and you're done
note:
My device China version redmin9
Download （Download link may require vpn）：
https://wwa.lanzous.com/iXvkCgnha5g
Click to expand...
Click to collapse
Thanks for sharing. This may be better than the other one from unofficialtwrp. Forks by wzsx150 are usually good from my past experience. Anyone successfully installed?
Shas45558 said:
Is your device boot successfully without any problem
I think it is not safe to flash this recovery in global version ROM...
Click to expand...
Click to collapse
My device has been tested without problems
lkj00 said:
Unofficial TWRP has been released, it is tested, can be used can be touched
REQUIREMENT :
- Already UNLOCK BOOTLOADER
- Your PC already installed adb&fastboot driver
-If you cannot enter the cycle boot, please refer to: https://forum.xda-developers.com/re...access-redmi-9-mediatek-t4149531（-vbmeta.img）
How to:
STEP 1
- Backup Always Recommended
-Turn off the phone-then press the volume down button + power on button to enter fastboot
-Then plug in the data cable (provided that your phone is correctly installed with the adb driver) and run the redmi9 one-key flashing tool
-Wait for the phone to enter recovery and you're done
note:
My device China version redmin9
Download （Download link may require vpn）：
https://wwa.lanzous.com/iXvkCgnha5g
Click to expand...
Click to collapse
lkj00 said:
My device has been tested without problems
Click to expand...
Click to collapse
Great.....you should try gsi on your device....
Sounds good and regards to the developer, But I recommend that to wait until the TWRP be tested well and release the first update vesion .
for me I will keep waiting for the official TWRP, no need to rush there is no any custom rom
Well it works for me. I use the redmi 9 nfc 3/32 lancelot.
Thread Title Edited to: Redmi 9 unofficial TWRP (Sep,2020)
Funk Wizard said:
Thread Title Edited to: Redmi 9 unofficial TWRP (Sep,2020)
Click to expand...
Click to collapse
Thanks for quick respond.
I just want to know can this be used to flash full magisk? I am in indian rom. Will there be brick issue or something?
Colossus96 said:
I just want to know can this be used to flash full magisk? I am in indian rom. Will there be brick issue or something?
Click to expand...
Click to collapse
I guess you can test it yourself. Quite easy to fix things if it doesn't boot the TWRP. You'll simply flash the original recovery.img from the current MIUI full ROM installed on your phone to erase the TWRP without even erasing userdata. My bootloader is currently locked so can't test it now. About bricks, as you know this is an MTK so you have to be extremely careful.
The advantage with TWRP is you can mod the system so long as you enable write access to that partition. Flashing Magisk modules also works better via the recovery.
Last thing, I think the only way you can get root on MIUI is through the patched boot method. Flashing the Magisk installer zip in TWRP just doesn't do.
Abdullah.Csit said:
Sounds good and regards to the developer, But I recommend that to wait until the TWRP be tested well and release the first update vesion .
for me I will keep waiting for the official TWRP, no need to rush there is no any custom rom
Click to expand...
Click to collapse
I also wait for offical..i root my device and use mod...
I do not want to take risk because of mtk prossessor...
I did
nielsync said:
Thanks for sharing. This may be better than the other one from unofficialtwrp. Forks by wzsx150 are usually good from my past experience. Anyone successfully installed?
Click to expand...
Click to collapse
I did installed it into my Redmi 9 4/64 Indonesia version... So far no problem at all
---------- Post added at 12:57 AM ---------- Previous post was at 12:50 AM ----------
lkj00 said:
Unofficial TWRP has been released, it is tested, can be used can be touched
REQUIREMENT :
- Already UNLOCK BOOTLOADER
- Your PC already installed adb&fastboot driver
-If you cannot enter the cycle boot, please refer to: https://forum.xda-developers.com/re...access-redmi-9-mediatek-t4149531（-vbmeta.img）
How to:
STEP 1
- Backup Always Recommended
-Turn off the phone-then press the volume down button + power on button to enter fastboot
-Then plug in the data cable (provided that your phone is correctly installed with the adb driver) and run the redmi9 one-key flashing tool
-Wait for the phone to enter recovery and you're done
note:
My device China version redmin9
Download （Download link may require vpn）：
https://wwa.lanzous.com/iXvkCgnha5g
Click to expand...
Click to collapse
Hi sir, i have tested this twrp, and its stable enough.. but i wanna ask u for helping us make a stable/official one based on PBRP (Pitch Black Recovery Project). Can u help us with this??
My telegram : @afdy_y
lkj00 said:
Unofficial TWRP has been released, it is tested, can be used can be touched
REQUIREMENT :
- Already UNLOCK BOOTLOADER
- Your PC already installed adb&fastboot driver
-If you cannot enter the cycle boot, please refer to: https://forum.xda-developers.com/re...access-redmi-9-mediatek-t4149531（-vbmeta.img）
How to:
STEP 1
- Backup Always Recommended
-Turn off the phone-then press the volume down button + power on button to enter fastboot
-Then plug in the data cable (provided that your phone is correctly installed with the adb driver) and run the redmi9 one-key flashing tool
-Wait for the phone to enter recovery and you're done
note:
My device China version redmin9
Download （Download link may require vpn）：
https://wwa.lanzous.com/iXvkCgnha5g
Click to expand...
Click to collapse
What is redmi 9 one key flashing tool? How can i find it?
Shas45558 said:
What is redmi 9 one key flashing tool? How can i find it?
Click to expand...
Click to collapse
It means the flashing program in the zip. You can just flash the img file via fastboot command. I tried, it works.
Copy the .img file to your fastboot folder & flash .
Almost brick my device.....
Today I installed this in my redmi 9....
I was surprised when I see that my device is is boot into this recovery....
I am very happy but my happiness gone after a few minutes.....
When I boot into system I cannot boot into recovery.....
So I format all user data and chach....
But same thing happen To me....
I flash this recovery again with fastboot mode.. then I can boot into recovery...
I think it could be happen because my phone is encrypted... So I force dencrypted my device....
When I want to boot into system. I fail to boot no system and no recovery...
I think it is over but luckily I able to boot into fastboot mood ..then I flash boot and recovery....
I realise that there is no need to flash this recovery... Because you can root your phone without recovery....
If you try to flash GSI ROM... It will not happen because it does not support GSI ROM
There is no option to erase system and vendor separately.....
So who want to flash GSI via this recovery, I suggest you do not flash it because we do not need it this time....
I am not sure it may be happen only with me. Feel free to share your experience...
Shas45558 said:
Today I installed this in my redmi 9....
I was surprised when I see that my device is is boot into this recovery....
I am very happy but my happiness gone after a few minutes.....
When I boot into system I cannot boot into recovery.....
So I format all user data and chach....
But same thing happen To me....
I flash this recovery again with fastboot mode.. then I can boot into recovery...
I think it could be happen because my phone is encrypted... So I force dencrypted my device....
When I want to boot into system. I fail to boot no system and no recovery...
I think it is over but luckily I able to boot into fastboot mood ..then I flash boot and recovery....
I realise that there is no need to flash this recovery... Because you can root your phone without recovery....
If you try to flash GSI ROM... It will not happen because it does not support GSI ROM
There is no option to erase system and vendor separately.....
So who want to flash GSI via this recovery, I suggest you do not flash it because we do not need it this time....
I am not sure it may be happen only with me. Feel free to share your experience...
Click to expand...
Click to collapse
This recovry is only to flash magisk for now. Flashing ROMs not supported yet. Don't try to flash rom with this.
That's mean this recovery is not helpful.....
Because we root our devices without any recovery....
Colossus96 said:
This recovry is only to flash magisk for now. Flashing ROMs not supported yet. Don't try to flash rom with this.
Click to expand...
Click to collapse
So it's just for the developers ( As first step to deal with this awful Mediatek ). We will look forward and hopping to get lucky as redmi note 8,8pro.
Abdullah.Csit said:
So it's just for the developers ( As first step to deal with this awful Mediatek ). We will look forward and hopping to get lucky as redmi note 8,8pro.
Click to expand...
Click to collapse
In order to get that lucky we will need source code. Without source code nothing can be done properly.
This might help you after realizing that you want to install custom ROM again after upgrading to android 11 MIUI but you cannot install android 10 or 11 based ROM and stuck with either boot loop or android rescue party.
WARNING: This might wipe every writable partition. Charge your phone at least 20% or more to prevent from destroying these partitions.
Instructions:
1. Download firmware from here
2. Download full ROM (either recovery or fastboot) from here
3. Save the firmware zip file it in either internal storage or sdcard. Reboot to TWRP afterwards
4. Tap install and find the zip file in your storage and install. Wait for a couple of seconds to get done.
To install full ROM
Recovery
1. After installing firmware from recovery mode, don't reboot. If you reboot the system it will fail to boot. Boot to fastboot if you fail this step and flash a recovery image. Proceed with next step.
2. Install full ROM flashable zip from sdcard or internal storage.
3. Format /data. Reboot.
Using fastboot
1. Boot from fastboot mode
2. Extract full ROM fastboot zip file.
3. Open miflash and locate the fastboot folder.
4. Choose flash_all. Click start.
5. The phone reboots itself. Boot to recovery mode and wipe data.
All done. The phone is now downgraded from android 11 back to android 10.
Note: I got 2 anti triggered when attempting to downgrade the phone using recovery and fastboot without installing firmware zip file first. RIP me I guess I voided my warranty anyways so doesnt matter as I already applied some insurance for my device.
TL;DR: Installed Recovery will get erased as I mentioned in WARNING. Please don't skip every step.
Edit: since it made confusion, I split steps for recovery and fastboot mode.
Has anyone tried this procedure?
Im on 12.0.6.0(EU). Bootloader locked (wait 3days) so no TWRP. Want downgrade to 12.0.8.0(EU) and flash Pixelexperience ROM.
It will work?
I'm a bit confusing... Links inserted in first 2 points seem to be the same link. So what I've to download exactly?
I'm on 12.0.7.0 Android 10 but I'm curious to try 12.0.6.0 Android 11 stable beta released some days ago...
PYCON said:
I'm a bit confusing... Links inserted in first 2 points seem to be the same link. So what I've to download exactly?
I'm on 12.0.7.0 Android 10 but I'm curious to try 12.0.6.0 Android 11 stable beta released some days ago...
Click to expand...
Click to collapse
Its not the same. First one is cca. 80MB of size while full rom is 2.4GB for recovery and 4.4GB for fastboot.
I did this method yesterday and its working. No problems whatsoever.
The only thing i would add is you need both versions of rom - recovery and fastboot. Recovery when you flash for the first time in recovery and fastboot when you flash with Mi flash.
And my advice is, android 11 miui is really bad. Its not finished, it stutters a lot, u can't use third party launchers with gesture navigation (at least in my case, Nova lanucher), performance is bad.
Not worth any time.
Steelrock said:
Its not the same. First one is cca. 80MB of size while full rom is 2.4GB for recovery and 4.4GB for fastboot.
I did this method yesterday and its working. No problems whatsoever.
The only thing i would add is you need both versions of rom - recovery and fastboot. Recovery when you flash for the first time in recovery and fastboot when you flash with Mi flash.
And my advice is, android 11 miui is really bad. Its not finished, it stutters a lot, u can't use third party launchers with gesture navigation (at least in my case, Nova lanucher), performance is bad.
Not worth any time.
Click to expand...
Click to collapse
Ok, ok, good to know. I'm just curious... I'll remain with A10 till when A11 will be good enough to be used as a daily driver
Hi. Does this method requires unlocked bootloader? Thanks
hi. this method not working for me !
*phone is unlocked !
ar-rabbiar said:
hi. this method not working for me !
*phone is unlocked !
Click to expand...
Click to collapse
This error is normal because ur phone is unlocked....but the phone should reboot normal in the new ROM. It did not happen this way?
Alin45 said:
This error is normal because ur phone is unlocked....but the phone should reboot normal in the new ROM. It did not happen this way?
Click to expand...
Click to collapse
reboot with bootloop and again. and just miui 12 a11 or rom with selinux permissive working for flash.
The same in here. Bootloop, bootloop....
But if flash the a11 rom it works.
ar-rabbiar said:
hi. this method not working for me !
*phone is unlocked !
Click to expand...
Click to collapse
did you try to flash firmware file from twrp recovery first? also that error means that a checkpoint failed which you need to disable or remove in configuration settings.
tourofeio said:
The same in here. Bootloop, bootloop....
But if flash the a11 rom it works.
Click to expand...
Click to collapse
did you tried recovery or fastboot flashing? and did you installed firmware first before installing full rom?
endva3 said:
Has anyone tried this procedure?
Im on 12.0.6.0(EU). Bootloader locked (wait 3days) so no TWRP. Want downgrade to 12.0.8.0(EU) and flash Pixelexperience ROM.
It will work?
Click to expand...
Click to collapse
i only tried recovery method and it works fine after days of trying. 12.0.6 android 11 is still buggy and miui needs to fix it a lot. most of apps are not well optimized for this flavor.
Today unlocked bootloader. Flashing 12.0.8.0 (i have 12.0.6.0 A11).
Everything work perfect. No bootloop, bootloader relock and works fine
People are probaly skipping some steps.
1. Download Firmware small size files
2. Download full Firmware, both - fastboot and recovery (put it on SD card, small and recovery)
3. Install Twrp or Orangefox recovery (download it from somewhere)
4. Enter into recovery and install small firmware FIRST, dont reboot, install big firmware (recovery version) SECOND
5. do not reboot
6. format data
7. Now reboot into fastboot
8. Extract fastboot firmware zip into new folder on desktop
9. Start Mi flash, select that folder where u extracted files and tick "clean only" on the bottom of the Mi flash if u want to leave bootloader unlocked and from drop down menu near that pick "flash_all.bat".
Thats how i did it.
Steelrock said:
People are probaly skipping some steps.
1. Download Firmware small size files
2. Download full Firmware, both - fastboot and recovery (put it on SD card, small and recovery)
3. Install Twrp or Orangefox recovery (download it from somewhere)
4. Enter into recovery and install small firmware FIRST, dont reboot, install big firmware (recovery version) SECOND
5. do not reboot
6. format data
7. Now reboot into fastboot
8. Extract fastboot firmware zip into new folder on desktop
9. Start Mi flash, select that folder where u extracted files and tick "clean only" on the bottom of the Mi flash if u want to leave bootloader unlocked and from drop down menu near that pick "flash_all.bat".
Thats how i did it.
Click to expand...
Click to collapse
i did the same, but looking to partitions of system, product and vendor, i understand that flashing the files via recovery and fastboot they dont write in that partitions.
looks like the partitions are read only. thanks
I try to flash a custom rom like arrows os via recovery , the rom shows the boot logo of arrows rom, and then bootloop.
tourofeio said:
I try to flash a custom rom like arrows os via recovery , the rom shows the boot logo of arrows rom, and then bootloop.
Click to expand...
Click to collapse
Most probable, u forgot to do a Format data (yes) before reboot to system.
endva3 said:
Today unlocked bootloader. Flashing 12.0.8.0 (i have 12.0.6.0 A11).
Everything work perfect. No bootloop, bootloader relock and works fine
Click to expand...
Click to collapse
Did you flash it from the built-in recovery or with MiFlash? (My 167 hour waiting period ends tomorrow)
Solved people. change the version of the Mi Flash.
Hello all,
It's a long time that's i haven't post a thread here but i have a question.I have a Poco with MIUI Global 9.6 Stable (9.6.25.0) for ROM with a Android Version 8.1.0 OPM 171019.011 with root acces, unlocking bootloader and TWRP 3.3.0-0 installed.
I would upgrade my phone to something "newer" (A ROM with Android 12 if possible) and conserv the root access and my apps.
I have read that now ,we should have 3 files to do that (firmware,system and vendor) to make a wipe and install new ROM with TWRP.
So my question:
-Is it possible to upgrade Android 8.1.0 to Android 12 witn a new ROM? (i have read something about kernel in Android12 but haven't understand all)
-Have i missed some steps or just download files,boot TWRP,wipe and install newer ROM+firmware and vendor appropriate is good?
-Which ROM do you recommend?
Thanks for the previous answers.
devil1 said:
Hello all,
It's a long time that's i haven't post a thread here but i have a question.I have a Poco with MIUI Global 9.6 Stable (9.6.25.0) for ROM with a Android Version 8.1.0 OPM 171019.011 with root acces, unlocking bootloader and TWRP 3.3.0-0 installed.
I would upgrade my phone to something "newer" (A ROM with Android 12 if possible) and conserv the root access and my apps.
I have read that now ,we should have 3 files to do that (firmware,system and vendor) to make a wipe and install new ROM with TWRP.
So my question:
-Is it possible to upgrade Android 8.1.0 to Android 12 witn a new ROM? (i have read something about kernel in Android12 but haven't understand all)
-Have i missed some steps or just download files,boot TWRP,wipe and install newer ROM+firmware and vendor appropriate is good?
-Which ROM do you recommend?
Thanks for the previous answers.
Click to expand...
Click to collapse
It's not possible to switch from stock ROM to custom without doing clean install. You will have to root again.
First update to latest Official Stock ROM, then take backup of your files to your PC or to SDCard (if you have one) , flash to latest Official TWRP and check my POCO F1 Ultimate Collection & Guides. You can find everything there. I have awarded recommended ROMs in my collection.
Feel free to ask if you have any question regarding the guides.
Thanks for the answer.I have begin to read your guides.
If i understand good,it's not possible to conserv my root,unlock bootloader and twrp when i upgrade to android 12? Automaticaly i should root again my phone and restore with titanium backup my files,contact,....?
devil1 said:
Thanks for the answer.I have begin to read your guides.
If i understand good,it's not possible to conserv my root,unlock bootloader and twrp when i upgrade to android 12? Automaticaly i should root again my phone and restore with titanium backup my files,contact,....?
Click to expand...
Click to collapse
First you need to take backup of your files to PC or External SDCard.
Then you should update to latest version of MIUI via OTA if it's possible or via TWRP (you can use the stock recovery rom to do it via twrp). (You can also use my guides for clean install stock rom)
Then you should unlock your bootloader if it's not already unlocked.
Then flash latest Official TWRP.
Then flash latest firmware (not vendor) just to make sure you are on the latest. (You should be on latest firmware after updating to the latest MIUI version)
Then Wipe everything + format data according to my guides and flash the ROM you want. If you choose A12 Pixel Experience or crDroid keep in mind that these ROMs use their own recovery because these are encrypted by default ROMs and TWRP can't handle the decryption of A12 encrypted ROMs yet. So to make OTA updates and that stuff work correctly devs of these ROMs decide to use their own recovery which can handle the decryption of encrypted roms and as result to make OTA update work fine. Check the installation instructions of these roms in their threads. (Afterwards you can use adb sideload to flash stuff using these recoveries)
After that, flash Magisk since you want root.
Then you can restore titanium backup if you want.
OK i follow your instruction.Thanks
Hello retrial,
I have now updating my phone to MIUI Global 12.0.3 Stable with Android Version 10QKQ1.My phone is not yet rooted and now he is encrypted.The recovery is now Mi-Recovery 3.0
I have unlock again my bootloader.
Now to follow your instruction,i should flash the latest TWRP.
I have take TWRP-3.6.0_9-0-berylium in your guide.
I think i should do Fastboot Method because i'm now in Mi-Recovery?i'm right?
No problem with the encryption?
Thanks.
i have find this video.This is not the good phone but i think that the installation is the same:
devil1 said:
Hello retrial,
I have now updating my phone to MIUI Global 12.0.3 Stable with Android Version 10QKQ1.My phone is not yet rooted and now he is encrypted.The recovery is now Mi-Recovery 3.0
I have unlock again my bootloader.
Now to follow your instruction,i should flash the latest TWRP.
I have take TWRP-3.6.0_9-0-berylium in your guide.
I think i should do Fastboot Method because i'm now in Mi-Recovery?i'm right?
No problem with the encryption?
Thanks.
Click to expand...
Click to collapse
Yes use Fastboot Method to flash TWRP. No problem with encryption.
After that follow my clean install custom rom guide to flash the ROM you want. Also please check the instructions in the threads of ROMs you want to flash. A12 crDroid and PE use their own recoveries.
Basically tell me which ROM you want to flash to help you exactly with steps.
Hello retrial,
i have a problem to install TWRP-3.6.0-9-0 on my pocophone.Everything working fine but in step 8 of your guide,i can't find my twrp.img that i have copied in 2 different case to test :
8. Boot into Recovery by typing in cmd: fastboot boot <recovery_filename>.img (The file may not be named identically to what stands in this command, so adjust accordingly and write the full path of it, check the example below).
This command will not flash permantly the recovery, it will just temporary boot into it and afterwards you will flash permantly the twrp.img you copied into your Internal Storage or SDcard in recovery partition.
For example: fastboot boot C:\Users\Retrial\Desktop\twrp-3.5.2_9-0-beryllium.img
Have you an idea to why i cannot find my twrp.img in the boot mode?
devil1 said:
Hello retrial,
i have a problem to install TWRP-3.6.0-9-0 on my pocophone.Everything working fine but in step 8 of your guide,i can't find my twrp.img that i have copied in 2 different case to test :
8. Boot into Recovery by typing in cmd: fastboot boot <recovery_filename>.img (The file may not be named identically to what stands in this command, so adjust accordingly and write the full path of it, check the example below).
This command will not flash permantly the recovery, it will just temporary boot into it and afterwards you will flash permantly the twrp.img you copied into your Internal Storage or SDcard in recovery partition.
For example: fastboot boot C:\Users\Retrial\Desktop\twrp-3.5.2_9-0-beryllium.img
Have you an idea to why i cannot find my twrp.img in the boot mode?
Click to expand...
Click to collapse
Send a screenshot what you type in cmd and where you have the twrp.img
Or you mean you can't find it in your device while you are booted on TWRP?
i cannot find the twrp.img in my device.The step 8 of your tutorial.
I have copied the files but cannot find it in the cases.I have take TWRP-3.6.0-9-0
The link of the files: https://eu.dl.twrp.me/beryllium/twrp-3.6.0_9-0-beryllium.img.html
devil1 said:
i cannot find the twrp.img in my device.The step 8 of your tutorial.
I have copied the files but cannot find it in the cases.I have take TWRP-3.6.0-9-0
The link of the files: https://eu.dl.twrp.me/beryllium/twrp-3.6.0_9-0-beryllium.img.html
Click to expand...
Click to collapse
Are you sure you select Install Image?
ok i have download an other twrp.img and this time it's ok.i can go to the end of the tutorial but when i reboot my device mi-recovery 3.0 come back.I have tried 2 times but all the time mi-recovery3.0 come back
Have you an idea?
Should i take a additional command like in the video i have send you in the thread "fastboot flash recovery"?
devil1 said:
ok i have download an other twrp.img and this time it's ok.i can go to the end of the tutorial but when i reboot my device mi-recovery 3.0 come back.I have tried 2 times but all the time mi-recovery3.0 come back
Have you an idea?
Should i take a additional command like in the video i have send you in the thread "fastboot flash recovery"?
View attachment 5549731
Click to expand...
Click to collapse
I have all the steps on my guide. Please read it carefully. It boots back to mi recovery because you haven't flash TWRP yet just booted into. After boot into TWRP u need to flash twrp in recovery section so it will stay after reboot.
Please read the steps.
Download portable Minimal ADB and Fastboot and latest Official TWRP recovery.
Open cmd from minimal adb and fastboot and write:
fastboot boot and the path you have TWRP.
Example:
Code:
fastboot boot C:\Users\Retrial\Desktop\twrp-3.6.0_9-0-beryllium.img
Then proceed with the rest steps in my guide. Connect ur device to pc while u are booted into TWRP and copy TWRP.img to your device. Then in TWRP press Install Image and select the twrp.img u just copied into ur device. Select recovery and done.
I have made a video to show you what happened (sorry for the bad quality and the moove) :
I think a video is easyest to understand my problem.For information my bootloader is unlock and usb debugging ok.
devil1 said:
I have made a video to show you what happened (sorry for the bad quality and the moove) :
I think a video is easyest to understand my problem.For information my bootloader is unlock and usb debugging ok.
Click to expand...
Click to collapse
Hmm strange, probably of MIUI. Anyway since you are going to flash custom rom, when u flash twrp in recovery go back and select wipe and wipe everything (read my clean install guide), go back press format data type yes, and then reboot to TWRP.
EDIT: I just saw u rebooted to system. That's not what we want. Press reboot to recovery.
i reboot first to bootloader after have flash the twrp.img in recovery.That's only the second time that i reboot to system to use the normal mode of the phone and reboot after to recovery mode to show you that mi recovery is back.
devil1 said:
i reboot first to bootloader after have flash the twrp.img in recovery.That's only the second time that i reboot to system to use the normal mode of the phone and reboot after to recovery mode to show you that mi recovery is back.
Click to expand...
Click to collapse
The TWRP flashed correctly. You overlap it again by pressing reboot to recovery from MIUI updater.
Don't do that...do the combination to boot to TWRP after flashing it. Power+Volume Up.
And continue with clean install steps in my guide to flash custom rom.
In my guide I write nowhere to boot to MIUI and press from MIUI Updater reboot to recovery, please stick to my guide and you will be fine.
Poco f1 update not