Hello,
I'm a beginner with building ROMs, yet I found an interest in build an AOSP for a phone(mi4c). I found the kernel sources released by the vendor, but I am trying to figure out the next steps: creating a device tree and getting the vendor blobs.
As I could check the kernel if for 5.1(managed to build it), and I would like to try to make that - AOSP 5.1.
Is there any way to extract the device tree from kernel(I found some device tree on git, yet I would like to know if there is another way to create it)?
for vendor blobs and which are required I found some information here on xda, but haven't tested so far.
Thanks!
Related
Hello everybody.
I have a noob question about compile cyanogenmod for my new device.
Now, i have: CMW recovery, Kernel source code on local computer, full repo cm source + toolchains.
How to add my device tree, kernel source code to CM source and compile CM7 ROm?
Thanks you, cheer
Anyone here?
Did you figure it out yet? I asked the same question and am waiting for an answer, tho I'm on CM 10, HTC Vivid. If I figure it out I'll post back and try and help.
nguyenhonganh said:
Hello everybody.
I have a noob question about compile cyanogenmod for my new device.
Now, i have: CMW recovery, Kernel source code on local computer, full repo cm source + toolchains.
How to add my device tree, kernel source code to CM source and compile CM7 ROm?
Thanks you, cheer
Click to expand...
Click to collapse
I met the same problem, does anyone can help?
Do you have a device tree? Or do you have an unsupported device? If you have an existing device tree from some other ROM, etc, then you just need to edit your .repo/local_manifest/roomservice.xml to pull in the trees that you need.
If you need to create a device tree, then it gets not complicated, as each device is different. The basic process is to create the necessary directories (device/manufacturer/model, kernel/manufacturer/model (may need to be kernel/manufacturer/device_family/model, for reference to that, see CM's repo for the LG G3) and finally vendor/manufacturer/device.
After you have the directories setup, you will need to actually start building the tree. The easiest way is to copy another devices files into your devices tree, and then edit the files. The closer the device you copy in is, the less work you will need to do to the files. Refer to sites like gsmarena.com, PhoneArena.com, etc for phone specs.
That's about as far as I can take you without dealing with a specific device. If you need more info, post back here with your questions, and post your device specs, or at least the model number,and I'll see if I can help.
rassawyer said:
Do you have a device tree? Or do you have an unsupported device? If you have an existing device tree from some other ROM, etc, then you just need to edit your .repo/local_manifest/roomservice.xml to pull in the trees that you need.
If you need to create a device tree, then it gets not complicated, as each device is different. The basic process is to create the necessary directories (device/manufacturer/model, kernel/manufacturer/model (may need to be kernel/manufacturer/device_family/model, for reference to that, see CM's repo for the LG G3) and finally vendor/manufacturer/device.
After you have the directories setup, you will need to actually start building the tree. The easiest way is to copy another devices files into your devices tree, and then edit the files. The closer the device you copy in is, the less work you will need to do to the files. Refer to sites like gsmarena.com, PhoneArena.com, etc for phone specs.
That's about as far as I can take you without dealing with a specific device. If you need more info, post back here with your questions, and post your device specs, or at least the model number,and I'll see if I can help.
Click to expand...
Click to collapse
I have a mt6750 devices... And there is a device from my company manufacturer.. Its a mt6750 device, it have cm device tree.. Both device working on same rom.. I can port that device rom but it always give me bugs.. So my question is how to use it?
Hello,
I'm trying to build a device tree for the Samsung Galaxy Tab A 9.7 (gt510wifi), by following CyanogenMod's porting guide here. I've managed to get a basic device tree going inside CM12.1's source tree, but I'm stuck at the part where I need to create the extract-files.shand the setup-makefiles.sh. The guide says to use other device trees as a reference for creating these scripts, but from what I can tell, each script is vastly different due to device discrepancies, and I'm unsure what to do at this point. I've searched everywhere online, but there doesn't seem to be any documentation whatsoever on how to create these files.
I'm no stranger to porting ROMs, as I've built SlimLP for my other devices, but I always had a pre-built tree created by another developer that I simply renamed files in to get it to work with SlimLP's sources.
Any help is greatly appreciated
I've seen one tutorial on developing custom rom from source. To do that device specific files like kernel, device tree and vendor blobs are needed. I have following problems regarding those files.
* Kernel - I have zip file of kernel downloaded from my device manufacturer site. How can i make use of that to build a rom?
* device tree - I'm not able to find a device tree for my device anywhere (github or anywhere), how can I build device tree using (kernel/stockrom...)
I'm totally new for this so I don't know if it is even possible or not. Or Is there any other way to create device tree.
* vendor blobs - I've same problem for vendor blobs as in device tree.
~ so from where and how I can extract or create device tree and vendor?
~ and make things ready to develop a custom rom
My device is HTC one (m8 eye)
code name : melsuhl
I have not found any tutorial to build vendor tree but there is an outstanding tutorial on building device tree..
Check this out : https://youtu.be/Uw_caMHZRC4
hello @HarshOne i am looking for the same things as you. Trying to build a lineageOS ROM for my cph2025 OPPO Find X2 Pro. Did you find a way to find those trees?
Hello guys.
This question is specially for devs or advanced users with development skills.
My question is related to the kernel source of one of my devices, Huawei Mediapad T1 10 (codename: hwt1a21l). I got the kernel source from the oficial Huawei website and uploaded it to a github repo. My device, which has a msm8916 chiset, doesn't have any development (roms, recoveries, device tree, etc) and his rom, EMUI 3.0, is based on Kit Kat 4.4.2.
I have been trying to bring development for this tablet many months ago because the stock rom is too deprecated for the hardware that has, with the msm8916 there is a huge potential to bring it a lot of development.
Well, i'm going to summarize my problems when trying to bring development for the device:
To get started development, for example a LineageOS build i needed a solid base to start with: device tree, propietary blobs and kernel source, so i got all of them. I ported the device tree from another one very similar to mine (with the same chipset), extracted the propietary blobs with the build tools from the source and got the kernel source from the Huawei website. So everything seemed to be good, but when i start the build process with my Linux machine (repo sync > source build/envsetup.sh > breakfast hwt1a21l > brunch hwt1a21l) i always receive thousands of build error by the kernel source, and i have been fixing (or at least avoid) a lot of them but it never ends, so i don't know if it's worth to keep trying to "fix" them or if i'm wasting my time.
So, what i have been trying to do: i have been trying to build a LineageOS 14.1 and TWRP recovery with my device tree This: Mustang-ssc/android_device_huawei_msm8916-common ported from this one from @dianlujitao : dianlujitao/android_device_huawei_msm8916-common and the specific kernel source for my device downloaded from the Huawei website Mustang-ssc/android_kernel_huawei_hwt1a21l. Here ends the summary.
So after a lot of hours, days and nights over the last months trying to make progress with this and not getting any help from the few devs i asked after seeing my lack of progress i decided to publicly ask for help.
The questions:
1. I have the official kernel source (Mustang-ssc/android_kernel_huawei_hwt1a21l) which i didn't have success to compile it, and then i saw the kernel source from a device almost identical to mine (same chipset, brand, ram, ...) (dianlujitao/android_kernel_huawei_msm8916). Can i use that kernel source as a base for my device after porting the specific configurations of my official kernel source (defconfig, drivers, libraries)? That one is much more updated and probably optimized than mine, but i don't know if it's possible to adapt a kernel source from other device using your kernel source.
2. This may be a dumb question: my device has Kit Kat 4.4.2. Is there any link between the kernel source and the android version the device has? I mean, i don't know if i should do something to adapt my kernel source for newer android versions (Marshmallow, Nougat) of if it's ok to just build with it without any change.
If you read it all, congratulations, you're awesome
Still waiting for a reply
I would like to develop a custom ROM for my device. I read some guides and obtained some basic knowledge, but still don't know how to start. So I would like to ask some questions to test my knowledge and expand them.
My device: Wiko View
My Android version (actually installed): 7.1.2 almost pure Android (just some third-party apps)
Desired Android version: AOSP 9.0 (maybe?)
So as far as I know I need these things:
AOSP Source Code (9.0)
Kernel
Vendor (tree or blobs?)
Device tree
So for the AOSP: I can get it from the repo hosted by Google. How should it look once downloaded?
For the kernel: should I use that from my actual ROM, or the most recent one? And how to include it in my ROM before compiling?
For the Vendor: As far as I read, with project treble I shouldn't edit this. But since I'm not developing a treble ROM, I'm in troubles, right? In older ROMs (before Oreo and Treble), they're stored in /system/vendor. Is just that folder or are there more? Do I need to update something? Where do I need to put this folder?
For the device tree: I read some guides that explains how to extract it from ROM (only from 5.0 and up, since mine is 7.1 no problems, I hope). Is this right or are there other ways? Or do I need to write it myself?
I'm going to thanks anyone in advance. I know there are plenty of questions, but I hope this thread will be a place for begginer (like me) to know more about compiling from source a ROM. Have a great day!