Related
After trying the lag fix I could not longer open any applications they just kept force closing. I tried restarting but now the phone wont even turn back on. it stays on galaxy s screen then just goes black. I ade a back up in clock work prior to doing this but I cant access it as i was accessing it through rom manager. How can i flash the back up to recover my phone =(
IF you made the backup using NANDROID in Clockwork recovery:
boot into recovery by holding volume up+volume down+power, as soon as you see the "white vibrant", let go of power but keep holding volume up+volume down. you will be brought to recovery, it should be black background with blue text, then use your volume buttons, to go to reinstall packages, use the power button to select it, that will put you into clockwork recovery. use the volume buttons to go to Nandroid->Restore then choose your backup, Good luck.
If all else fails you may need to use ODIN to get the factory image back on, information on how to do that is in the stickies. Search for it, you will find it.
You can open the backup by holding both volume keys as you power on the phone I believe....either that or it will go into download mode and you can then use odin to flash. Hope it helps.
Edit: nevermind, look at the pay above mine lol
Sent from my SGH-T959 using XDA App
Recovery
Thanks for the quick replys greatly appreciated. I click reinstall packages but ti doesnt go into recovery. I'm thinking because I called the lag fix update.zip it is reinstalling that instead of the recovery..I think im still new to all this. I looked at the odin sticky. is there a way I can use that program and use the backup that is on my phone or is it lost and must I use the one that is provided in the sticky?
You can install Stock Rom Via ODIN. I found the link from this forum. I was in the same situation yesterday but I ended up flashing to Vibrant5.zip instead. After that, my files were still on the phone. If you made a backup with ROM manager, your backup files should be in /sdcard/clockworkmod/backup. Reinstall ROM manager and see if you can restore back to that.
I cant get into get to rom manager because my phone just boots to a black screen. is there away i can access my internal sd without having the phone booted?
http://forum.xda-developers.com/showthread.php?t=734475 follow the instructions...worked for me last night when I 'bricked' my phone by removing twlauncher with root manager
Solution
**********SOLUTION***********
Thanks for the reply's from those that did. i ended up using odin3 which took me forever to figure out lol. The brunt of my problems was getting into download mode. after searching the internet for which seemed like for ever and 100 unsuccessful attempts to get into download mode I came across on post that really helped.
I had to turnoff the phone, plug it in and wait until i seen the green battery indicator. Once i saw it i held down both volume up and down keys then pressed power. The key was as soon as the battery indicator disappeared you have to let go of power.
that worked on the first try for me from there it was smooth sailing. Odin is very simple but its the little things that are very tricky and because i didnt know what the protocol was I didnt know whether I was even in download mode or not, so these are some things to know
*you will no when you are in download mode because a picture of a yellow triangle will appear on the screen with an android in the middle with a shovel digging.
*No the recovery menu is not download mode
*Just because Odin detects the phone(Displays COM port in yellow) Does not mean you are in download mode....Which was my misconception.
*The "analyzing file" message should only appear briefly a minute or two max. Anything longer is not normal and Odin needs to be reset as well as the whole process.
*It doesn't take to long to flash and it WORKS I am back on stock and happy as hell =)
Thanks again to those that helped and good luck to any future brickers.
i just saw this post but what i did was to save the clockwork update.zip into my computer and downloaded this: http://forum.xda-developers.com/showthread.php?t=739300. unzipped it and deleted the root.zip from the directory and renamed update.zip to root.zip and hit rootme.bat
the program will push root.zip (clockwork recovery) into phone and reboot into recovery while stuck in any screen =)
I had this exact same set of issues. Ultimately what caused the problem is the fact Busybox wasn't installed. I ran the update.zip version that supposedly had busybox, ran the script and then all of my programs crashed. The phone would never reboot after that. Ultimately saved it with Odin and was able to restore my nandroid backup after getting ROM Manager going again. Very scary hour there!
jzanitsch said:
I had this exact same set of issues. Ultimately what caused the problem is the fact Busybox wasn't installed. I ran the update.zip version that supposedly had busybox, ran the script and then all of my programs crashed. The phone would never reboot after that. Ultimately saved it with Odin and was able to restore my nandroid backup after getting ROM Manager going again. Very scary hour there!
Click to expand...
Click to collapse
this happened to me while I was backing up my current rom, the scrary thing is that I never used oden.. is it possible for me to "unbrick" my phone?? it can go into download mode but the yellow bar for the ID:COM doesnt show
please help!!
Super Hard Bricked my SGH T959 Vibrant
Please PLEASEEEEEE HELP ME ... PLEASE
I was flashing jelly bean 4.1 (my previous version was ICS 4.0 by ExROM by LightX). When I rebooted my phone it was showing the Vibrant screen >> "VIBRANT SAMSUNG". then my phone was not starting. it was stocked in the screen. i did CWM recovery but it was also not working. I have tried many ways by ODIN or Heimdell Soft Unbrick. but now i get into only downloading mode. no vibrant screen isn't appearing. only one time ODIN can recognize my phone then i haven't the t959 tar file. so i didn't flash that time. after that i gave soft unbrick by Heimdell's software then my download mode went off and not restarting. by the way when i downloaded the TAR file and connect to ODIN then ODIN couldn't recognize my phone. my PC can recognize my phone but ODIN can't. whenever i give soft unbrick the download screen goes off. i have tried two computers and two cables. same problem appearing. i have also tried all odin versions but these are not working. only one time ODIN can recognize my phone. further before, when i gave volume up + volume down + power button then RST_STAT = 0*0 ..... appearing and an android said "UNKNOWN UPLOAD MODE" but now there is no android but the red little letters still appearing on my screen. PLEASE BOSS HELP ME... PLEASE .
Can someone assist?
I was going from bionix V, and decided to Odin back to stock. I used pit 512 and a kernel here - the last one on the list (stock+froyo uvkb1) on this post - forum.xda-developers.com/archive/index.php/t-870480.html
I flashed the kernel here as the pda in Odin. I thought this was the right way to go, but instead, I'm now stuck in an infinite recovery loop where I can't reboot and can't flash any thing else. I just boot into recovery over and over again. I've mounted the drive, deleted all the files, added back in backups, and tried to flash a ton of stuff, but I keep getting this error:
E: can't mount /dev/block/stl11 ( file exists)
E:cant mount CACHE: recovery/command
cant mount cache:recovery/log
cant open cache:recovery/log
re-partition, auto reboot, and f.reset time were all checked in odin, but nothing else.
Oh, and I can't just use odin to restore - I cannot get into download mode using either the three button method or the adb method.
Can anyone help? I seriously don't want to have to go buy another phone - mainly because I can't really afford that sort of thing.
EDIT: Appreciate people helping here - just to clarify, I don't need help with 3 button method or adb into download - those methods aren't working.
There are 4 ways to get into download that I know of and 3 are on the phone itself.
1. Power down. Insert USB. Hold down vol up / vol down, and hold power until phone starts to boot. Let go of power and hold down volume until download starts.
2. Using a command prompt and ADB, tell the device to reboot into download.
3. Reboot into download via the CWM recovery menu.
The 4th way is the homemade jig, which I don't have the tools to create at the moment. However, I may try it shortly here.
I've tried all 3 of the ways above, and I'm stuck in a boot loop. I'm also unable to disable voodoo.
Does anybody know anyway to do a full on clean reset of the phone with Odin, nandroid, etc? The issue is, all of these methods on the boards would work if I could get into download, BUT, the phone won't mount the proper files for whatever reason (error code in original post) and so I cannot get into download, the home screen, nothing but the cwm recovery menu.
You should get in to download mode and odin stock jdf, those files you flashed are froyo builds. I don't think it work's that way, you must flash jdf first.
I know I need to do that - problem is, I can't get into download mode. That's step one - I'm stuck in the cwm recovery menu, over and over, and can't get anywhere else. Any ideas?
Try this
how to put in download mode- sure fire way
1- phone off
2- open Odin
3- hold vol button and plug in USB.
I just posted a thread. My phone just keep going to DL when I switch battery.
Thanks, but no - that method isn't working. There are 4 ways to get into download that I know of and 3 are on the phone itself.
1. Power down. Insert USB. Hold down vol up / vol down, and hold power until phone starts to boot. Let go of power and hold down volume until download starts.
2. Using a command prompt and ADB, tell the device to reboot into download.
3. Reboot into download via the CWM recovery menu.
The 4th way is the homemade jig, which I don't have the tools to create at the moment. However, I may try it shortly here.
I've tried all 3 of the ways above, and I'm stuck in a boot loop. I'm also unable to disable voodoo.
Does anybody know anyway to do a full on clean reset of the phone with Odin, nandroid, etc? The issue is, all of these methods on the boards would work, BUT, the phone won't mount the proper files for whatever reason (error code in original post).
I really appreciate you trying to help, it's the right answer for a lot of issues, but just not this one.
power off phone
pull out battery
GRAB THIS STUFF : http://forum.xda-developers.com/showthread.php?t=1047087
turn on odin
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode and go back to stock with odin from here!
make sure u put the proper .pit and .pda file in there proper places on odin and ur set to go.
Enjoy and also make sure u have the proper samsung drivers
What if you can get in dl mode but odin won't read your phone? I have the correct drivers intalled. It was working fine til I upgrated to cm7. Now my phone is stuck at vibrant screen and can't get in recovery. The phone boots in dl mode but its not recognized by my pc. Any ideas if I'm screwed?
Sent from my Htcclay FastTest using XDA App
I hope this is in the right section, don't know as I am new to XDA.
But I have a real issue. Here goes.
I recently updated my Xperia S to ICS. And I thought I want to root it.
So I went ahead and started, but when I should have placed a zip file on my internal memory, I extracted the files there instead.
So no, on CWM, when I am supposed to install from .zip file, I can't, since I do not have .zip file there.
I have tried almost all of the options on CWM on the phone, nothing works and I just get back to the start.
So my question is, how do I get out of the loop?
Is there any way I can access my phones files? So I maybe can put the SuperSU .zip file in the directory?
I can boot the phone in fastboot mode, but then it doesn't show on the computer.
Or maybe I can just reverse everything? An easy way, because I am not the best when it comes to this. I have found some solutions, but they ALL require that you put files on your SD card. Only problem is that my phone doesn't have SD card, only internal memory. ANd I can't access that right now.
Please help
Download Flashtools from http://androxyde.github.com/
Download a stock ftf rom from here http://forum.xda-developers.com/showthread.php?t=1599303
Put the downloaded rom in the flashtool/firmwares/ folder, then go to flashtool/drivers/ folder and run Flashtool-drivers.exe, when that has finished restart your computer.
Turn phone off, now press and hold the volume down button and connect the phone to your computer with the usb cable, when you get a green led you can let go, you are now in flash mode.
Start up flashtool, or flashtool64 if your on an x64 system, click the thunderbolt icon in the top left corner, select flashmode and click ok, in the left hand window select the rom you downloaded and then click ok in the bottom right corner.
karder said:
I hope this is in the right section, don't know as I am new to XDA.
But I have a real issue. Here goes.
I recently updated my Xperia S to ICS. And I thought I want to root it.
So I went ahead and started, but when I should have placed a zip file on my internal memory, I extracted the files there instead.
So no, on CWM, when I am supposed to install from .zip file, I can't, since I do not have .zip file there.
I have tried almost all of the options on CWM on the phone, nothing works and I just get back to the start.
So my question is, how do I get out of the loop?
Is there any way I can access my phones files? So I maybe can put the SuperSU .zip file in the directory?
I can boot the phone in fastboot mode, but then it doesn't show on the computer.
Or maybe I can just reverse everything? An easy way, because I am not the best when it comes to this. I have found some solutions, but they ALL require that you put files on your SD card. Only problem is that my phone doesn't have SD card, only internal memory. ANd I can't access that right now.
Please help
Click to expand...
Click to collapse
Is your Bootloader unlocked?
Hello, I'm having the same problem too, but I wonder how do I "turn off" the device, since I keep pressing the top button to do this and it reboots and goes into CWM mode? Will I have to remove the battery?
Good news. Luckily I managed turn off the device. In the CWM main menu, keep the cursor positioned over the option that resets the device. Hold down the power button and immediately after, press the volume up and hold. Wait until the device vibrates 3 times. Now ready you run the procedure to connect in download mode and reinstall your firmware.
You guys must have used cmd to flash nozomi-recovery.img?
Sent from my LT26i using Tapatalk 2
Yeah, exactly. I used recovery-nozomi.img with CWM version 5.5.0.4 ... but I made a mistake in not installing SuperSU.
hdegenaro said:
Yeah, exactly. I used recovery-nozomi.img with CWM version 5.5.0.4 ... but I made a mistake in not installing SuperSU.
Click to expand...
Click to collapse
That's why I hate nozomi - recovery.img!
Nothing to worry... Happened to me too.
Use flashtool to reflash entire ftf(if you have ulbl) else use SEUS to repair (if you have lbl, I hate pcc!).
If lbl.... Then ulbl.
Use cmd to flash a custom kernel(don't use doom kernel its for gb).
Finished....
Thank... If helpful
Sent from my LT26i using Tapatalk 2
hmm
Had a similar problem.. FIxed it with a lot of reading but now dnt remeber anymore :/
I'm having this problem too...
Almost everything is ready for flashing now, except the phone is not really turning off, even after 3 vibrates when holding down power and volume up... It turns off, but coming back in flash process!
That's how far I can go: It turns off, I hold down volume down, connect it to PC, have a green light. Flashtool see the phone, I push Flash button,Program gives "Device connected in flash mode" message, then "Selected Xperia s (LT26i)_WORLD_6,1,A,2,50_IT.flf" message, "Preparing files for flashing" message and "Device disconnected" message, because this stupid Recovery back on my screen again...
If I just can find the way to turn off my phone, so it's not come back to live when connected to PC...
hdegenaro said:
Good news. Luckily I managed turn off the device. In the CWM main menu, keep the cursor positioned over the option that resets the device. Hold down the power button and immediately after, press the volume up and hold. Wait until the device vibrates 3 times. Now ready you run the procedure to connect in download mode and reinstall your firmware.
Click to expand...
Click to collapse
Please, tell me which option do you mean..? It's no such an option like "Reset the device"...
SOLVED!
I manage to fix it!
Just wait for Flashtool to give error message (with phone picture and USB cable in it) and ask to reconnect device. Unplug device, press power button and volume up button until vibrate 3 times. Push volume down and plug usb cable, to get green light. Flashtool continue process from where it was broken.
Error message popped up not from first try, so hopefully this will be helpful to somebody...
Sorry for my english...
Many Thanks
a lot of thanks.....
My phone was stuck in CWM mode. After going through this post, i could recover my phone in normal mode
neel-arnab said:
a lot of thanks.....
My phone was stuck in CWM mode. After going through this post, i could recover my phone in normal mode
Click to expand...
Click to collapse
You wrong section!
Xperia P, U, Sola, Go Q&A, Help & Troubleshooting
Hi, This guide is made for flashing Alcatel OneTouch POP UP (6044D). This won't work on any other device. This guide is very simple. If your device has been soft BRICKED or Hard BRICKED this is the way to restore it.
THE FIRMWARE PROVIDED IN THIS THREAD DEOS NOT BELONG TO ME
I AM NOT RESPONSABLE OF ANY DAMAGE CAUSED TO YOUR DEVICE BECAUSE OF THIS GUIDE, DO NOT TELL ME THAT YOUR DEVICE HAS BEEN BRICKED
What you will need
1: PC/ Laptop
2: Miracle Box (Link given down the thread)
3: Qualcomm Drivers
4: The Device
And some knowledge
So Let's start.
Link for Firmware:
https://drive.google.com/file/d/0ByQqd_psFzvxSEJ1OUpxSFFtRW8/view
Link for Miracle Box:
Link will be available tomorrow
First download QUALCOMM drivers, it's very essential or your PC won't detect it.
Download Miracle box (PROVIDED in the THREAD). The miracle Box has been cracked so it does not need a dongle. Make sure to turn off the antivirus otherwise the Antivirus will delete it:crying:
Download the FIRMWARE of the device, I have tried other Firmware with different tools but this was the only one that worked, my device was also Hard BRICKED, so the FIRMWARE is tested. Also I have tried other guides provided online but neither of them worked for me, Flashing it with QFIL Will lead to an error or an Unfinished flash.
When everything is installed.
[PHOTOS ARE INCLUDED ONE THE BOTTOM OF THE THREAD]
Open Miracle Box, Click on QUALCOMM, Then on Flashing, There you will see two option "Write Flash" and "Custom Flasher", so Click on "custom Flasher". Then choose "File to Write".
Also choose Partion(s) that you want to Flash. e.g. System.img so choose system as Partion and system.img as file to Write.
Once all of this is done, boot the device into edl mode, yes, 6044D has edl mode.
HOW TO
So to boot into edl there are two ways to boot into it. First is through recovery mode (stock) or TWRP etc... So if you have a recovery then navigate to reboot to bootloader in recovery, when pressing power button to choose it, press volume + and - at the same time start pressing home button two to three time. and then will turn dark black or back with backlight turned on.
This one is for without recovery, in case you don't have a recovery then, press power, volume + - and home button at the same time, the phone will start and will show boot logo, keep pressing it till it restarts, (When restarting press the home button multiple time) and it will go in edl.
(But in my case, I had to do it multiple time to get to edl mode)
Back to PC. Plug the USB to the device and the PC then Press port button, if it doesn't detect it, it means that it's not in edl mode, try again
When all is set press start, ( everything said on the upper paragraph must be done quickly or it will give an error ) so be quick:good:
Once the partition is flashed, do the same one by one with the whole rom, mainly system, boot, recovery etc... (When doing it you don't need to reboot and come back in edl mode)
WHEN FLASHING DO NOT REMOVE THE USB PORT! OR IT WILL LEAD TO EVEN WORSE CONDITION, JUST DON'T
Reboot and enjoy!
If you have any problems or questions ask me, give a thanks, that keep me motivated:silly:
Some stock rom screenshots are attached,
Another thing is that of you have a custom recovery for Alcatel pop up 6044D, like TWRP, CWM or Philz recovery, so please send it to me
My Tab S6 tried to auto-install an update yesterday (it is rarely connected to Wifi/internet). It then rebooted. Since then, it's been stuck in a boot loop.
It will display the "Samsung Galaxy Tab S6 | Secured By Knox" logo screen for a few seconds, then switch to the blue "Installing System Update" screen (with the android logo). Installing System Update gets to 28% and stops. Then the rotating icon on the android freezes. Then the device reboots and starts all over again.
Edit: the tablet is 100% stock. It's not been rooted or had any custom ROMs loaded.
I have tried getting to recovery mode, by holding power+volup while it boots. This doesn't seem to change the behavior at all. Any advice is much appreciated.
Fedge7 said:
My Tab S6 tried to auto-install an update yesterday (it is rarely connected to Wifi/internet). It then rebooted. Since then, it's been stuck in a boot loop.
It will display the "Samsung Galaxy Tab S6 | Secured By Knox" logo screen for a few seconds, then switch to the blue "Installing System Update" screen (with the android logo). Installing System Update gets to 28% and stops. Then the rotating icon on the android freezes. Then the device reboots and starts all over again.
Edit: the tablet is 100% stock. It's not been rooted or had any custom ROMs loaded.
I have tried getting to recovery mode, by holding power+volup while it boots. This doesn't seem to change the behavior at all. Any advice is much appreciated.
Click to expand...
Click to collapse
can you shut it down? try volume down and power button ? if it don't shut down, do this soon as it reboots, hold volume up and down and plug in usb cable to desktop/laptop usb port! it will boot into download mode!
N1NJATH3ORY said:
can you shut it down? try volume down and power button ? if it don't shut down, do this soon as it reboots, hold volume up and down and plug in usb cable to desktop/laptop usb port! it will boot into download mode!
Click to expand...
Click to collapse
I can't actually shut it down. If I start holding power+voldown right after it boots, the tablet does reboot before getting stuck at 28%. But it reboots--it doesn't power off.
I tried download mode and that actually seemed to work! Specifically, I left the tablet overnight in the reboot loop until the battery drained. Just now, I held down volup+voldown and plugged it into my laptop. I got the green "Warning/Custom OS" screen and then pressed volup to continue. The tablet rebooted pretty quickly after that (I'm guessing due to low battery) so I didn't get a good look at the download mode options.
Once I'm in download mode, can I factory reset the tablet? I don't need to preserve any data/apps/settings.
Fedge7 said:
I can't actually shut it down. If I start holding power+voldown right after it boots, the tablet does reboot before getting stuck at 28%. But it reboots--it doesn't power off.
I tried download mode and that actually seemed to work! Specifically, I left the tablet overnight in the reboot loop until the battery drained. Just now, I held down volup+voldown and plugged it into my laptop. I got the green "Warning/Custom OS" screen and then pressed volup to continue. The tablet rebooted pretty quickly after that (I'm guessing due to low battery) so I didn't get a good look at the download mode options.
Once I'm in download mode, can I factory reset the tablet? I don't need to preserve any data/apps/settings.
Click to expand...
Click to collapse
You cannot reset the tablet from Download mode afaik- You need to enter Recovery Mode to do that.
You can however, flash stock from Download mode using Odin (3.13.3 is best). If you're not confident with doing that, your best option is Factory Reset in Recovery Mode. Hold Volume Up and Power when the Tablet is booting, let go when you see the Samsung logo. The timing can be tricky, but you should be able to do it. Also, you can force a reboot with Volume Down and Power.
Alternatively, if factory reset doesn't work, since you're completely stock, you will still be covered under warrenty.
bartleby999 said:
your best option is Factory Reset in Recovery Mode. Hold Volume Up and Power when the Tablet is booting, let go when you see the Samsung logo.
Click to expand...
Click to collapse
Thanks for the suggestion. I have tried this many many times. I've tried letting go of the buttons at different times. I've tried holding volup while letting go of power. I've tried this a ton of different ways, and no matter what, the tablet always shows the "Installing system update" screen. Some googling has led me to believe that sometimes, when performing a factory reset, the "Installing system update" screen shows up right before the normal recovery screen. Is it possible that the tablet is trying to get to recovery mode, but can't get past this first step?
Fedge7 said:
Is it possible that the tablet is trying to get to recovery mode, but can't get past this first step?
Click to expand...
Click to collapse
Honestly, I don't know - I'm not an expert but I guess it's possible that the update failed and corrupted both System and Recovery.
You'll be covered under warrenty, so maybe just return the Tablet from where you purchased or direct to Samsung, could take a while given the current situation though I guess. If you have a PC, then I think the best option would be to just flash stock yourself, since that's probably all Samsung will do. Even if that doesn't work you'd still be covered under warrenty, as far as I'm aware attempting to flash stock doesn't trip Knox.
Here is solution to unbrick your device!!!
Fedge7 said:
My Tab S6 tried to auto-install an update yesterday (it is rarely connected to Wifi/internet). It then rebooted. Since then, it's been stuck in a boot loop.
...
Edit: the tablet is 100% stock. It's not been rooted or had any custom ROMs loaded.
I have tried getting to recovery mode, by holding power+volup while it boots. This doesn't seem to change the behavior at all. Any advice is much appreciated.
Click to expand...
Click to collapse
Despair not...I have just come from resolving this exact situation not 30 minutes ago. I'd been trying to flash (using Odin as I decided to stay on Stock and not root this device, for a change) the latest OneUI2.1 releases for my device (SM-T865 - LTE version) and boom in the middle of the Odin update, the flash just failed...I then couldn't reboot and get into neither Recovery, nor Download Mode because it appears my bootloader and recovery both got corrupted.
Here's what you need....
1. Odin app for PC (am on Windows)
2. Your device's Stock firmware (sammobile firmware archive)
3. You will need someone to help you boot the device directly into Download mode (and this is the tricky part because for most of us we are used to get into Bootloader by using the key combination (from Powered Off device) Vol+ and Power On at the same time to get into stock recovery and then scrolling down to option 2 in this menu, "Reboot to Bootloader". Well now you are going to boot directly into Bootloader mode. Here's how you do it...
4. Get your friend to line up the USB-C cable into the port of the device, but DO NOT press it in...yet
5. Press Power off and Vol- buttons at the same time to turn off the device
6. And now you have to to be super fast: if device starts to turn on on its own, YOU press and hold Vol+ and Vol- both at the same time while YOUR FRIEND pushes the USB cable fully into the port - you should now have booted directly into Download mode. (if not repeat this, and remember to be super fast and sync with your friend pushing in the USB cable)...
7. When you get into Download mode, then you are home and dry...
8. Select ONLY the Bootloader file (BL...XX...) in Odin, make sure only "reset time" and "reboot" are ticked, and flash
9. When device reboots, press Vol+ and Power combo to get back into Bootloader mode again...but I think device will reboot into Download mode on its own
10. Now select all the files from your Stock file into the various tabs (BL, CP, CSC, AP...) do not select HOME_CSC as we want to flush this device clean...
11. Flash, and voila...success - you will have lost all your data but rather that than losing the device...
12. Feedback here and let us know if this works? For reference for others in the future...
FYI, I got in this situation, and the previous post did work for me, just takes good timing! Thanks!!!!
Same issue today for me. My tablet showed different screen with green and red text, it allowed me to delete app data, then booted into safe mode, then i had to do factory reset and now i am screwed, as it is refusing to restore any apps and their settings. I will try to flash it back to Android 9, maybe then it will do the restore. I forgot to do any manual backup to SD or so.
Edit: the device upgraded to 10, but reset itself after about 10 minutes of use.
Edit2: i found what caused it. It is caused by Nova Launcher, if i try to set wallpaper.
Just found a news article that there is a RGB/sRGB problem with wallpapers. It might be the problem i had.
I am adding a screenshot of the result.
Yeah, I had that kind of reboot loop from a wallpaper that I downloaded
Moe5508 said:
Here is solution to unbrick your device!!!
Despair not...I have just come from resolving this exact situation not 30 minutes ago. I'd been trying to flash (using Odin as I decided to stay on Stock and not root this device, for a change) the latest OneUI2.1 releases for my device (SM-T865 - LTE version) and boom in the middle of the Odin update, the flash just failed...I then couldn't reboot and get into neither Recovery, nor Download Mode because it appears my bootloader and recovery both got corrupted.
Here's what you need....
1. Odin app for PC (am on Windows)
2. Your device's Stock firmware (sammobile firmware archive)
3. You will need someone to help you boot the device directly into Download mode (and this is the tricky part because for most of us we are used to get into Bootloader by using the key combination (from Powered Off device) Vol+ and Power On at the same time to get into stock recovery and then scrolling down to option 2 in this menu, "Reboot to Bootloader". Well now you are going to boot directly into Bootloader mode. Here's how you do it...
4. Get your friend to line up the USB-C cable into the port of the device, but DO NOT press it in...yet
5. Press Power off and Vol- buttons at the same time to turn off the device
6. And now you have to to be super fast: if device starts to turn on on its own, YOU press and hold Vol+ and Vol- both at the same time while YOUR FRIEND pushes the USB cable fully into the port - you should now have booted directly into Download mode. (if not repeat this, and remember to be super fast and sync with your friend pushing in the USB cable)...
7. When you get into Download mode, then you are home and dry...
8. Select ONLY the Bootloader file (BL...XX...) in Odin, make sure only "reset time" and "reboot" are ticked, and flash
9. When device reboots, press Vol+ and Power combo to get back into Bootloader mode again...but I think device will reboot into Download mode on its own
10. Now select all the files from your Stock file into the various tabs (BL, CP, CSC, AP...) do not select HOME_CSC as we want to flush this device clean...
11. Flash, and voila...success - you will have lost all your data but rather that than losing the device...
12. Feedback here and let us know if this works? For reference for others in the future...
Click to expand...
Click to collapse
Bravo!!
Works for me.
Many thanks
I can get into download mode. But it kicks me out within a few seconds. Any help please
Moe5508 said:
Here is solution to unbrick your device!!!
Despair not...I have just come from resolving this exact situation not 30 minutes ago. I'd been trying to flash (using Odin as I decided to stay on Stock and not root this device, for a change) the latest OneUI2.1 releases for my device (SM-T865 - LTE version) and boom in the middle of the Odin update, the flash just failed...I then couldn't reboot and get into neither Recovery, nor Download Mode because it appears my bootloader and recovery both got corrupted.
Here's what you need....
1. Odin app for PC (am on Windows)
2. Your device's Stock firmware (sammobile firmware archive)
3. You will need someone to help you boot the device directly into Download mode (and this is the tricky part because for most of us we are used to get into Bootloader by using the key combination (from Powered Off device) Vol+ and Power On at the same time to get into stock recovery and then scrolling down to option 2 in this menu, "Reboot to Bootloader". Well now you are going to boot directly into Bootloader mode. Here's how you do it...
4. Get your friend to line up the USB-C cable into the port of the device, but DO NOT press it in...yet
5. Press Power off and Vol- buttons at the same time to turn off the device
6. And now you have to to be super fast: if device starts to turn on on its own, YOU press and hold Vol+ and Vol- both at the same time while YOUR FRIEND pushes the USB cable fully into the port - you should now have booted directly into Download mode. (if not repeat this, and remember to be super fast and sync with your friend pushing in the USB cable)...
7. When you get into Download mode, then you are home and dry...
8. Select ONLY the Bootloader file (BL...XX...) in Odin, make sure only "reset time" and "reboot" are ticked, and flash
9. When device reboots, press Vol+ and Power combo to get back into Bootloader mode again...but I think device will reboot into Download mode on its own
10. Now select all the files from your Stock file into the various tabs (BL, CP, CSC, AP...) do not select HOME_CSC as we want to flush this device clean...
11. Flash, and voila...success - you will have lost all your data but rather that than losing the device...
12. Feedback here and let us know if this works? For reference for others in the future...
Click to expand...
Click to collapse
Hi,
Really need your help, after I updated my firmware using Odin, updated BL, AP, CP, CSC, my tab cannot boot up stuck in logo. Doing the Power + volume up leads me to different screen now. I cannot access recovery mode or download page anymore,
What must I do? Pleasssee help. Added the pic, after doing hard reset (power + vol up)
I cannot connect back to Odin also. Always setup connection failed.
Please help. Really messed up big time
Just a thought... Can this be restored from service center?
Thank you in advance.
I have the same problem with a Tab S6 Lite, it is in bootloop and does not let me enter the recovery mode, I can go into download mode and I flashed the latest original firmware Android11, Android10 etc., . I tried them all but always goes in bootloop, and also the bootloop occurs only if I connect the usb cable to the PC, without any sign of life. Do I still have hopes or have I compromised the motherboard?
The reason for all this is because I had followed a guide to give root permissions with magisk, I did everything right, only that the guide was with Android10, while I had Android11 and I was deceived by the fact that in the title of the guide there was written "guide 2021"
, so I did not check the compatibility of operating systems, I was a fool, I know, I hope so much that I did nothing irretrievable, it's my son's tablet!
Genpis said:
I have the same problem with a Tab S6 Lite, it is in bootloop and does not let me enter the recovery mode, I can go into download mode and I flashed the latest original firmware Android11, Android10 etc., . I tried them all but always goes in bootloop, and also the bootloop occurs only if I connect the usb cable to the PC, without any sign of life. Do I still have hopes or have I compromised the motherboard?
The reason for all this is because I had followed a guide to give root permissions with magisk, I did everything right, only that the guide was with Android10, while I had Android11 and I was deceived by the fact that in the title of the guide there was written "guide 2021"
, so I did not check the compatibility of operating systems, I was a fool, I know, I hope so much that I did nothing irretrievable, it's my son's tablet!
Click to expand...
Click to collapse
Did you use HOME CSC or the non HOME CSC when flashing?
Genpis said:
I have the same problem with a Tab S6 Lite, it is in bootloop and does not let me enter the recovery mode, I can go into download mode and I flashed the latest original firmware Android11, Android10 etc., . I tried them all but always goes in bootloop, and also the bootloop occurs only if I connect the usb cable to the PC, without any sign of life. Do I still have hopes or have I compromised the motherboard?
The reason for all this is because I had followed a guide to give root permissions with magisk, I did everything right, only that the guide was with Android10, while I had Android11 and I was deceived by the fact that in the title of the guide there was written "guide 2021"
, so I did not check the compatibility of operating systems, I was a fool, I know, I hope so much that I did nothing irretrievable, it's my son's tablet!
Click to expand...
Click to collapse
Try to install a castom rooted rom which has pre installed also Twrp.
[MAGISK Rom / Firmware base convertor) 420rom-T860/5 - V13.3- CUE1 - ANDROID 10 - OneUI 3.1 - Sec Patch 05/2021 - Released 06/07/2021
WELCOME TO 420 ROM - MAGISK ROM FOR SAMSUNG GALAXY TAB S6 WiFi/4G (T860/5)! 420rom Telegram-Group: Please bear in mind that things will be added as and when my learning and time permits (being a dad with a family and having ADHD myself means...
forum.xda-developers.com
Download the android 11 last rooted rom from there. You install it with odin as as a normal original rom.
Disable in odin auto reboot. After rom install, restart manually and press the correct buttons immediately to boot in Twrp and not to system. Format (not wipe) data from there and reboot to system. If you are lucky it will work..
(I hope you unlocked bootloader before try to root. If you haven't unlocked bootloader this won't work also).
Moe5508 said:
Here is solution to unbrick your device!!!
Despair not...I have just come from resolving this exact situation not 30 minutes ago. I'd been trying to flash (using Odin as I decided to stay on Stock and not root this device, for a change) the latest OneUI2.1 releases for my device (SM-T865 - LTE version) and boom in the middle of the Odin update, the flash just failed...I then couldn't reboot and get into neither Recovery, nor Download Mode because it appears my bootloader and recovery both got corrupted.
Here's what you need....
1. Odin app for PC (am on Windows)
2. Your device's Stock firmware (sammobile firmware archive)
3. You will need someone to help you boot the device directly into Download mode (and this is the tricky part because for most of us we are used to get into Bootloader by using the key combination (from Powered Off device) Vol+ and Power On at the same time to get into stock recovery and then scrolling down to option 2 in this menu, "Reboot to Bootloader". Well now you are going to boot directly into Bootloader mode. Here's how you do it...
4. Get your friend to line up the USB-C cable into the port of the device, but DO NOT press it in...yet
5. Press Power off and Vol- buttons at the same time to turn off the device
6. And now you have to to be super fast: if device starts to turn on on its own, YOU press and hold Vol+ and Vol- both at the same time while YOUR FRIEND pushes the USB cable fully into the port - you should now have booted directly into Download mode. (if not repeat this, and remember to be super fast and sync with your friend pushing in the USB cable)...
7. When you get into Download mode, then you are home and dry...
8. Select ONLY the Bootloader file (BL...XX...) in Odin, make sure only "reset time" and "reboot" are ticked, and flash
9. When device reboots, press Vol+ and Power combo to get back into Bootloader mode again...but I think device will reboot into Download mode on its own
10. Now select all the files from your Stock file into the various tabs (BL, CP, CSC, AP...) do not select HOME_CSC as we want to flush this device clean...
11. Flash, and voila...success - you will have lost all your data but rather that than losing the device...
12. Feedback here and let us know if this works? For reference for others in the future...
Click to expand...
Click to collapse
Why flashing only the bootloader first? At the moment I'm trying to recover my s20 fe from a bootloop without losing my data
sosimple said:
Try to install a castom rooted rom which has pre installed also Twrp.
[MAGISK Rom / Firmware base convertor) 420rom-T860/5 - V13.3- CUE1 - ANDROID 10 - OneUI 3.1 - Sec Patch 05/2021 - Released 06/07/2021
WELCOME TO 420 ROM - MAGISK ROM FOR SAMSUNG GALAXY TAB S6 WiFi/4G (T860/5)! 420rom Telegram-Group: Please bear in mind that things will be added as and when my learning and time permits (being a dad with a family and having ADHD myself means...
forum.xda-developers.com
Download the android 11 last rooted rom from there. You install it with odin as as a normal original rom.
Disable in odin auto reboot. After rom install, restart manually and press the correct buttons immediately to boot in Twrp and not to system. Format (not wipe) data from there and reboot to system. If you are lucky it will work..
(I hope you unlocked bootloader before try to root. If you haven't unlocked bootloader this won't work also).
Click to expand...
Click to collapse
Any tips in recovering my stock s20 fe from a bootloop without losing data? already tried Odin but without success the first try
jointer said:
Same issue today for me. My tablet showed different screen with green and red text, it allowed me to delete app data, then booted into safe mode, then i had to do factory reset and now i am screwed, as it is refusing to restore any apps and their settings. I will try to flash it back to Android 9, maybe then it will do the restore. I forgot to do any manual backup to SD or so.
Edit: the device upgraded to 10, but reset itself after about 10 minutes of use.
Edit2: i found what caused it. It is caused by Nova Launcher, if i try to set wallpaper.
Click to expand...
Click to collapse
did you managed to not lose your data?
jrdef said:
Any tips in recovering my stock s20 fe from a bootloop without losing data? already tried Odin but without success the first try
Click to expand...
Click to collapse
Wiping cache partition in Recovery and reflashing the firmware are basically your only 2 options
jrdef said:
Any tips in recovering my stock s20 fe from a bootloop without losing data? already tried Odin but without success the first try
Click to expand...
Click to collapse
Flash in odin the same rom you had. There are 2 csc files in rom, which you use 1 in odin one. Try use the "home csc". Home csc keep KEEPS your data. If you're lucky it may work. (It would work in keeping your data 100% if your rom was ok. Because it isn't you have some changes to work.).
You must try with same rom or newer.
CSC – If you flash the CSC file, it’ll perform a factory reset of your Galaxy device and wipe all data while installing a new firmware to bring your device to the same state as it was when you purchased it. Go with CSC if you want a clean installation.
HOME_CSC – On the other hand, if you want to keep your Samsung phone’s data and settings even flashing the stock firmware, you can select the HOME_CSC file.