Hello guys,
i have a big big big problem
I was not able to flash a md5 data with odin to reset my phone(cause i rooted it)
As i used the root i installed twrp too and always if i try to get to the boot menu twrp started instead.
But what can i do now?
The O/S is deleted....what can i do
Please help me
ThX
iHüsoo91 said:
Hello guys,
i have a big big big problem
I was not able to flash a md5 data with odin to reset my phone(cause i rooted it)
As i used the root i installed twrp too and always if i try to get to the boot menu twrp started instead.
But what can i do now?
The O/S is deleted....what can i do
Please help me
ThX
Click to expand...
Click to collapse
Just flash the stock firmware. Which model do you have? G925???
Hey
yeah i try it but doesent worked
But let me say this
I repaired my phone
The md5 flash file was damaged
So I downloaded a other version and it worked
Thx again
Related
Hello,
This is my first time installing a custom rom and I hope i did everything right. I installed CM9 using the guide found on their wiki page and installed it successfully. But after installation i cannot get my sim card to work on the phone.
Recovery: ClockWorkMod
CM9: 9.0.0-i9300
Galaxy SIII international.
Thanks in advance
Muzammil Ahmed
muxammle said:
Hello,
This is my first time installing a custom rom and I hope i did everything right. I installed CM9 using the guide found on their wiki page and installed it successfully. But after installation i cannot get my sim card to work on the phone.
Recovery: ClockWorkMod
CM9: 9.0.0-i9300
Galaxy SIII international.
Thanks in advance
Muzammil Ahmed
Click to expand...
Click to collapse
try reinstall a stock rom, check if everythings is fine then reinstall CM9
Thnx for the quick response
I think the problem isn't cm9, when I was trying to install the from I couldn't boot to the cwm recovery because I forgot to root my device. Then I rooted my s3 with cf something root kit and then my signals were gone. I have the international version so my phone should be factory unlocked so I thought I should install cm anyway cuz that might solve the problem. But it didn't. I really like cyanogenmod and don't want to revert back to crappy touchwizz . The problem was there before installing cm9 but after rooting my phone.
Please any help. I really need to use my phone.
Thnx
Muzammil
muxammle said:
Thnx for the quick response
I think the problem isn't cm9, when I was trying to install the from I couldn't boot to the cwm recovery because I forgot to root my device. Then I rooted my s3 with cf something root kit and then my signals were gone. I have the international version so my phone should be factory unlocked so I thought I should install cm anyway cuz that might solve the problem. But it didn't. I really like cyanogenmod and don't want to revert back to crappy touchwizz . The problem was there before installing cm9 but after rooting my phone.
Please any help. I really need to use my phone.
Thnx
Muzammil
Click to expand...
Click to collapse
You should reinstall everything from the scratch mate, so revert your device at stock (using odin), then flash the correct [email protected] kernel and finally if everything is working flash cm9.
Edit: if your device is locked i think you can unlock it easily, search in the forum you can find out everything you need for this.
Sent from my GT-I9300 eating Jelly Bean
sorry mate ..
i am a complete noob, i dont know how to revert to stock rom, stock recovery and unroot my device
Download original firmware for your phone from sammobiles and flash it using odin. If is good then root it again and flash cm9.
Sent from my GT-I9300 using xda app-developers app
Arsaw said:
Download original firmware for your phone from sammobiles and flash it using odin. If is good then root it again and flash cm9.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Okay,
I have downloaded my firmware file but i noticed that i need three tar files for the flashing precess through ODIN but i downloaded only 1 file *.tar.md5
no clue now what to do
Update: I tried to extract the file using splitfus but it didnt work.
Update 2: Okay now I have Installed my stock firmware and it seems to be working now.. But should I risk installing the CM9 again ?
muxammle said:
Okay,
I have downloaded my firmware file but i noticed that i need three tar files for the flashing precess through ODIN but i downloaded only 1 file *.tar.md5
no clue now what to do
Update: I tried to extract the file using splitfus but it didnt work.
Click to expand...
Click to collapse
- launch Odin
- load that ONE FILE on PDA section
- put your phone in download mode (volume down+home+power)
- connect the phone to computer, wait for drivers to be installed and ODIN to find your phone (you will see a message in Odin)
- click start
- don't touch the phone until it's done. It will boot alone
Also, it might be a good idea to wipe data / reset to factory before and after flash.
You could find all this info with google ....
On the topic, I have a similar issue. My phone was factory unlocked , and got locked after flashing latest stock firmware. Downgrading didn't solved anything. I am searching the forums right now, but it seems like all fixes are dated.
If anyone could point me in the right direction, it will be appreciated.
Thx
Hey rsndetre,
Thnx for the post, but sorry I already did that and it worked ..
Here are the method I used to get back my device back to normal and got my sim card working and again reinstalled cm9
1- Downloaded Toolkit from http://forum.xda-developers.com/showthread.php?t=1703488
2- Flashed Stock Boot Image
3- Flashed Stock Recovery Mode
4- Downloaded stock firmware from http://fus.nanzen.se/
5- Flashed stock firmware using Odin (your method above)
6- Rooted the device again (using odin and CF-Root-SGS3-v6.4)
7- Downloaded and placed cm9 and google apps package in SDCARD
8- Installed Rom Manager from Play Store.
9- Downloaded and Installed ClockWorkMod from rom manager and booted to recovery mode using RomManager
10- Then factory resetted, formatted the cache and installed the CM9 and GAPPS V11
Then my phone was good to go.
My phone is up and running, thanks rsndetre, Arsaw and TecQuality for your replies. I appreciate your time
Thanks
Muzammil Ahmed.
hey guys, I was running my S3 on the paranoid android(2.99) just fine but then I tried to flash 2.54 over my 2.99 install through TWRP. It flashed fine but then it was stuck on the PA bootscreen so then I tried restoring a backup through TWRP but it said no backups found even though I made 3, i later realised they were in a different folder and I couldn't get them.
Anway, desperate to get a working phone, I downloaded the I9300XXELLA firmware and flashed it via ODIN, it failed so I disconnected my phone and now it says "Firmware upgrade encountered an issue, select recovery mode through kies". I cannot go into recovery or download mode.
Is there anyway to get my phone to work or have I successfully created a paperweight?
The phone was bought from India. If I need to provide any information, let me know, I'd love having my phone back.
First step is to source a USB recovery Jig to get to download mode .
That fails its a service centre .
jje
S1N1ST3R said:
hey guys, I was running my S3 on the paranoid android(2.99) just fine but then I tried to flash 2.54 over my 2.99 install through TWRP. It flashed fine but then it was stuck on the PA bootscreen so then I tried restoring a backup through TWRP but it said no backups found even though I made 3, i later realised they were in a different folder and I couldn't get them.
Anway, desperate to get a working phone, I downloaded the I9300XXELLA firmware and flashed it via ODIN, it failed so I disconnected my phone and now it says "Firmware upgrade encountered an issue, select recovery mode through kies". I cannot go into recovery or download mode.
Is there anyway to get my phone to work or have I successfully created a paperweight?
The phone was bought from India. If I need to provide any information, let me know, I'd love having my phone back.
Click to expand...
Click to collapse
1st u remove battery and install again and try to going on download mode after that u just flash stock recovery via odin and then u flash stock rom via odin,find zip for stock recovery,
sam77744 said:
1st u remove battery and install again and try to going on download mode after that u just flash stock recovery via odin and then u flash stock rom via odin,find zip for stock recovery,
Click to expand...
Click to collapse
Thanks man, I'll try this and let you know how it goes.
EDIT: It works! Cheers bro, much appreciated!
Hey guys,
So I tried to root my S6 Edge and it got stuck on startup, I tried flashing back to the stock ROM, for the SMG-925F, which is the phone I have. Odin fails when flashing the rom. On my phone it says SW REV. CHECK FAIL. DEVICE: , BINARY: 2.
I would really appreciate help as I just got this phone and it is quite frustrating.
Thanks for all the great work you guys do.
Do you have a custom recovery installed?
If so, upload zipped ROM via USB (MTP or USB host) boot to recovery, flash a 5.0.1 ROM from there, flash supersu afterwards and reboot system.
If no custom recovery , you can still try Samsung KIES software and use emergency recovery,
Hey. I have fixed my issue. I extracted my stock rom to a folder, deleted hidden.img/cm.bin/modem.bin and it let me use it. Can anyone explain why this worked? Thanks
nuclearbigdaddy said:
Hey. I have fixed my issue. I extracted my stock rom to a folder, deleted hidden.img/cm.bin/modem.bin and it let me use it. Can anyone explain why this worked? Thanks
Click to expand...
Click to collapse
The reason you probalby got stuck in starting screen is because you did not unlock the bootloader from developer setting which will cause it not to boot. But for the second part I don't know why odin does this; it seems like extracting the package let's you install the things that are actually needed.
Sent from my SM-G925T using Tapatalk
I've got a bootloop issue and i cant install stock fw in flashtools as its giving me error...
I really need a backup file of my device so i can restore it using twrp recovery
anyone who has the same device as i am and have twrp installed please share your backup:crying:
*Solved*
e5533/e5563 and e5553/e5506 are technically the same apart from single/ dual sim right?
do you think i can flash the dual sim fw on my single sim device? will i brick or i can still recover?
im getting really desperate as i got this phone for only a week and i cant use it coz of the bootloop issue:crying:
unfortunately i have the same problem, how did you solve it @mhike286?
I searched the web for a rom.zip but without success, only those .ftf files, which are useless in that situation
Maybe also someone can provide a twrp backup for my E5533?
*Solved*
I managed to flash the ftf firmware throu flashmode from Androxyde, it was still there (thought it was replaced with twrp)
mhike286 said:
I've got a bootloop issue and i cant install stock fw in flashtools as its giving me error...
I really need a backup file of my device so i can restore it using twrp recovery
anyone who has the same device as i am and have twrp installed please share your backup:crying:
Click to expand...
Click to collapse
chk your pm
mhike286 said:
I've got a bootloop issue and i cant install stock fw in flashtools as its giving me error...
I really need a backup file of my device so i can restore it using twrp recovery
anyone who has the same device as i am and have twrp installed please share your backup:crying:
Click to expand...
Click to collapse
hey can i have that backupp too .. i accidently wipe the system
http://forum.xda-developers.com/xpe...peria-c4-c5-ultra-unlocked-bl-relock-t3463837
System available from e5553 dont know if it works for you. Use it at your own risk
Help. I'm new on flashing. Recently I accidentally made a big mistake by flashing a wrong recovery on my phone (Cloudfone geo 401q+) and now its stock on boot logo. I made a backup of stock recovery and firmware using flashify but I don't know how can it help me to get my phone back to working. Any help will be gladly appreciated. Thanks
Mnlpz said:
Help. I'm new on flashing. Recently I accidentally made a big mistake by flashing a wrong recovery on my phone (Cloudfone geo 401q+) and now its stock on boot logo. I made a backup of stock recovery and firmware using flashify but I don't know how can it help me to get my phone back to working. Any help will be gladly appreciated. Thanks
Click to expand...
Click to collapse
Flash your brands firmware first with pc then flash the recovery of your choice and report
prashantp01 said:
Flash your brands firmware first with pc then flash the recovery of your choice and report
Click to expand...
Click to collapse
Can you help me how to flash the firmware that I got using flashify? I don't know how to use it. The firmware file name is "gea4c3f5-00193-gbd6bb61 #1" I don't know if I should edit it or let it like this because it doesn't have file extension on it. Sorry I'm newbie on flashing
Help :crying::crying::crying::crying: